Painful Symptomatology Reported by Dentistry Students at a Brazilian University

Objectives: Identification of the level of knowledge on ergonomics principles, and application of these by dentistry students to investigate whether painful symptomatology was experienced. An-other objective is the expansion of discussions on occupational health in academic settings. Study Design and Settings: Dentistry students of the Federal University of Rio Grande do Norte, Brazil (n = 148) were surveyed using the Nordic Musculoskeletal Questionnaire to determine the severity of musculoskeletal symptoms experienced. Data were analyzed through EpiInfo 7.0 to measure central trends and variability 5for quantitative variables, absolute and relative frequencies for categorical variables, and significance between groups (confidence intervals and chisquare). Association analysis (Pearson) was also carried out. Results: Ergonomic measures were not reported by students. Within the musculoskeletal symptoms described, females were the most affected, independent of academic level. Conclusions: Positive correlations were verified between all categories and all anatomic regions (e.g., neck, lower back, wrists, hands, and shoulders). Data suggest progressive worsening of symptoms, which will eventually result in leaves of absence.

Avaliação da adaptação marginal de diferentes tipos de restaurações obtidas por CAD/CAM e métodos convencionais

The past few decades have brought many changes to the dental practice and the technology has become ready available. The result of a satisfactory rehabilitation treatment basically depends on the balance between biological and mechanical factors. The marginal adaptation of crowns and prosthetic structures is vital factor for long-term success. The development of CAD / CAM technology in the manufacture of dental prostheses revolutionized dentistry, this technology is capable of generating a virtual model from the direct digital scanning from the mouth, casts or impressions. It allows the planning and design of the structure in a computered software. The virtual projects are obtained with high precision and a significant reduction in clinical and laboratory time. Thus, the present study (Chapters 1, 2 and 3) computed microtomography was used to evaluate, different materials, different CAD/CAM systems, different ways of obtaining virtual model (with direct or indirect scanning), and in addition, also aims to evaluate the influence of cementing agent in the final adaptation of crowns and copings obtained by CAD / CAM. Furthermore, this study (Chapter 4, 5 and 6) also aims to evaluate significant differences in vertical and horizontal misfits in abutment-free frameworks on external hexagon implants (HE) using full castable UCLAs, castable UCLAs with cobalt-chromium pre-machined bases and obtained by CAD / CAM with CoCr or Zirconia by different scanning and milling systems. For this, the scanning electron microscopy and interferometry were used. It was concluded that the CAD / CAM technology is capable to produce restorations, copings and screw-retained implant-supported frameworks in different materials and systems offering satisfactory results of marginal accuracy, with significative reduction in clinical and laboratory time.

Content and methodology of predoctoral Geriatric Dentistry teaching in Europe

Objectives: To explore the content and methodology of predoctoral Geriatric Dentistry teaching amongst European dental schools.
Methods: The study was conducted by the European College of Gerodontology (ECG) Education Committee. Αn electronic questionnaire has been developed with close and open-ended items, including information on the prevalence and institutional anchorage of Gerodontology programs, the educators, the content and the methodology of teaching. An electronic mail, including a hyperlink to the questionnaire, was sent to 216 dental schools in 39 European countries (Winter/ Spring 2016). The Deans were asked to either answer themselves, or forward the link to faculty members with knowledge on Gerodontology teaching at their respective schools. Repeated reminders or telephone calls were used for non-respondents and personal networks were exploited to identify potential contact persons.
Results: Until August 2016, 121 dental schools from 29 countries responded to the survey (response rate 56%, EU response rate: 60%). Gerodontology was included in the predoctoral curricula of 86% of the respondents and was compulsory in 68%. The course was mainly offered in senior students and was interdisciplinary in 30% of the schools, delivered mainly by dentists (79%), physicians (21%), psychologists (10%), and nurses (5%). It was conducted as an independent lecture series in 40% of the schools and a course director was assigned in 44% of the respondents. When embedded in other disciplines, these were mainly Prosthodontics (31%). The content included a large number of items, such as epidemiology of oral health, medical problems in old age, prosthodontic management, xerostomia, and caries risk assessment. Lectures were the most common teaching format (69%), followed by small group seminars (27%). The most common types of educational material used were scientific articles (48%), printed textbooks (44%), lecture notes (40%) and e-learning material (21%). Clinical training was offered by 64% of the respondents, within the dental school clinics (49%) and/or in outreach locations (40%).
Conclusion: Amongst the respondent European dental schools (66%) there is an increasing number that teach Gerodontology at a pre-doctoral level with significant variations in content and methodology. Official guidelines and the dissemination of the ECG pre-doctoral curriculum guidelines might help to increase the prevalence and improve the status of Gerodontology teaching in Europe.

Erupção passiva alterada

Introdução: Nos últimos anos, a estética tem vindo a desempenhar um papel cada vez mais importante na Medicina Dentária. Um sorriso considerado agradável é uma parte indispensável relativamente à harmonia facial e consequentemente à autoestima das pessoas. Quando durante o sorriso há exposição de mais de 3mm de gengiva, este é designado por “sorriso gengival”. Considerado como um sorriso inestético, representa uma queixa muito comum por parte dos pacientes e à qual se tem vindo a dar cada vez mais importância. De entre as várias causas, no âmbito deste trabalho, destaca-se a Erupção Passiva Alterada (EPA). Com uma prevalência de 12% na população geral, a EPA é uma condição de difícil diagnóstico devido aos seus sinais pouco específicos e, por isso, muitas vezes ignorada ao longo dos últimos anos. É um fenómeno que não é previsível e a sua etiologia ainda não é muito clara, mas parece tratar-se de um anormal desenvolvimento a nível dentário, em que uma grande porção da coroa dentária fica coberta por gengiva, dando a aparência de coroas clínicas curtas. Apesar de estar hoje em dia propriamente classificada, não dispensa um cuidadoso diagnóstico para que venha a ser tratada adequadamente. O objetivo deste trabalho é efetuar uma revisão bibliográfica dos principais conceitos relativos à etiologia deste fenómeno e à sua classificação, assim como fazer uma abordagem ao seu diagnóstico e tratamento. Materiais e métodos: Foi realizada uma pesquisa na base de dados da PubMed e Research Gate, utilizando como palavras/expressões-chave: “altered passive eruption” e “delayed passive eruption”. A pesquisa resultou num total de 23 artigos, tendo sido complementada com duas obras literárias de interesse. Resultados/conclusões: Foi possível verificar que, apesar de não haver muitos estudos relativos à EPA, é cada vez mais importante realizar um diagnóstico correto para que o tratamento seja o adequado e irmos de encontro às expectativas do paciente, já que muitas vezes este é um fenómeno não identificado devido às suas características inespecíficas. O tratamento da EPA é feito de acordo com a sua classificação e os seus resultados melhoram bastante a estética do sorriso.

Efeito das variáveis laboratoriais protéticas na adesão da porcelana com ligas de níquel-cromo

The metalceramic crowns are usually used in dentistry because they provide a resistant structure due to its metallic base and its aesthetics from the porcelain that recovers this structure. To manufacture these crowns, a series of stages should be accomplished in the prosthetic laboratories, and many variables can influence its success. Changes in these variables cause alterations in the metallic alloy and in the porcelain, so, as consequence, in the adhesion between them. The composition of the metal alloy can be modified by recasting alloys, a common practice in some prosthetic laboratories. The aim of this paper is to make a systematic study investigating metalceramic crowns as well as analyzing the effect of recasting Ni-Cr alloys. Another variable which can influence the mechanism of metalceramic union is the temperature used in firing porcelain procedure. Each porcelain has to be fired in a fixed temperature which is determined by the manufacturer and its change can cause serious damages. This research simulate situations that may occur on laboratory procedures and observe their consequences in the quality of the metalceramic union. A scanning eletron microscopy and an optic microscopy were accomplish to analyse the metal-ceramic interface. No differences have been found when remelting alloys were used. The microhardness were similar in Ni-Cr alloys casted once, twice and three times. A wettability test was accomplished using a software developed at the Laboratório de Processamento de Materiais por Plasma, on the Universidade Federal do Rio Grande do Norte. No differences were found in the contact angle between the solid surface (metallic substratum) and the tangencial plane to the liquid surface (opaque). To analyse if the temperature of porcelain firing procedure could influence the contact area between metal and porcelain, a variation in its final temperature was achieve from 980° to 955°C. Once more, no differences have been found

Odontometric analysis of molars for sex determination

Aim: To investigate the existence of sexual dimorphism between the first and second permanent molars. Methods: A cross-sectional, observational, blind study using comparative and statistical descriptive procedures. The sample included 50 pairs of plaster casts from undergraduate dental students (25 men/25 women) from the Federal University of Paraíba, João Pessoa/PB, Brazil, aged 20-26 years. Odontometric measurements of first and second maxillary/mandibular, right/left permanent molars were performed. Mesiodistal (MD) and buccolingual/palatal (BL/BP) widths and the distance between the lingual cusps of corresponding molars in opposite quadrants, were measured. The data were analyzed by Student’s t test and ANOVA with Bonferroni (p≤0.05). Results: The crowns of all first molars were statistically larger in men than in women (p<0.05). Maxillary and mandibular left second molars (#27 and #37) did not differ in their MD widths (p=0.66, p=0.75), whereas mandibular left and right second molars (#37 and #47) showed statistically different BL widths (p=0.007 and p=0.008). As to the distance between the lingual cusps, only the first left-to-right mandibular molars (#36-46) showed no sex dimorphism (p=0.107). Conclusions: Molars are larger in males than in females. Individually, first molars demonstrated higher evidence of sex distinction than second molars.

The role of forensic dentistry for identification of a criminal sexual assault: a casework report

This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Different Aspects of General Anesthesia in Pediatric Dentistry: A Review

Context:Most child population is able to undergo dental treatment in the conventional setting. However, some children fail to cope with in-office conscious state and cannot respond to usual management modalities. This review aims to discuss the topic further. Evidence Acquisition: A computerized search in databases PubMed, MEDLINE, EMBASE, Google Scholar and Google were performed using dental general anesthesia related keywords. Original and review English-written articles that were limited to child population were retrieved without any limitation of publication date. The suitable papers were selected and carefully studied. A data form designed by author was used to write relevant findings. Results: Preoperative oral examination and comprehensive evaluation of treatment needs is only possible after clinical and radiographic oral examination. Effective collaboration in dental GA team should be made to minimize psychological trauma of children who undergo dental GA. Before conducting comprehensive dental treatment under GA, the general health of the child and the success rate of procedures provided needs to be accurately evaluated. It is noteworthy that determination of the optimal timing for GA dental operation is of great importance. Providing safety with pediatric dental rehabilitation under GA is critical. Conclusions: Besides criteria for case selection of dental GA, some degree of dental practitioner’s judgment is required to make decision. Pre- and post-operative instructions to parents or caregiver decrease the risk of complications. However, trained resuscitation providers, careful monitoring and advanced equipment minimize adverse outcomes.

Towards automatic tree crown detection and delineation in spectral feature space using PCNN and morphological reconstruction

The application of object-based approaches to the problem of extracting vegetation information from images requires accurate delineation of individual tree crowns. This paper presents an automated method for individual tree crown detection and delineation by applying a simplified PCNN model in spectral feature space followed by post-processing using morphological reconstruction. The algorithm was tested on high resolution multi-spectral aerial images and the results are compared with two existing image segmentation algorithms. The results demonstrate that our algorithm outperforms the other two solutions with the average accuracy of 81.8%.

Case-control study of early childhood caries in Australia

The aim of this case-control study of 617 children was to investigate early childhood caries (ECC) risk indicators in a non-fluoridated region in Australia. ECC cases were recruited from childcare facilities, public hospitals and private specialist clinics to source children from different socioeconomic backgrounds. Non-ECC controls were recruited from the same childcare facilities. A multinomial logistic modelling approach was used for statistical analysis. The results showed that a large percentage of children tested positive for Streptococcus mutans if their mothers also tested positive. A common risk indicator found in ECC children from childcare facilities and public hospitals was visible plaque (OR 4.1, 95% CI 1.0-15.9, and OR 8.7, 95% CI 2.3-32.9, respectively). Compared to ECC-free controls, the risk indicators specific to childcare cases were enamel hypoplasia (OR 4.2, 95% CI 1.0-18.3), difficulty in cleaning child's teeth (OR 6.6, 95% CI 2.2-19.8), presence of S. mutans (OR 4.8, 95% CI 0.7-32.6), sweetened drinks (OR 4.0, 95% CI 1.2-13.6) and maternal anxiety (OR 5.1, 95% CI 1.1-25.0). Risk indicators specific to public hospital cases were S. mutans presence in child (OR 7.7, 95% CI 1.3-44.6) or mother (OR 8.1, 95% CI 0.9-72.4), ethnicity (OR 5.6, 95% CI 1.4-22.1), and access of mother to pension or health care card (OR 20.5, 95% CI 3.5-119.9). By contrast, a history of chronic ear infections was found to be protective for ECC in childcare children (OR 0.28, 95% CI 0.09-0.82). The biological, socioeconomic and maternal risk indicators demonstrated in the present study can be employed in models of ECC that can be usefully applied for future longitudinal studies.

Expression of chondromodulin-1 in the temporomandibular joint condylar cartilage and disc

BACKGROUND: The temporomandibular joint (TMJ) cartilage consists of condylar cartilage and disc and undergoes continuous remodeling throughout post-natal life. To maintain the integrity of the TMJ cartilage, anti-angiogenic factors play an important role during the remodeling process. In this study, we investigated the expression of the anti-angiogenic factor, chondromodulin- 1 (ChM-1), in TMJ cartilage and evaluate its potential role in TMJ remodeling. METHODS: Eight TMJ specimens were collected from six 4-month-old Japanese white rabbits. Safranin-O staining was performed to determine proteoglycan content. ChM-1 expression in TMJ condylar cartilage and disc was determined by immunohistochemistry. Three human perforated disc tissue samples were collected for investigation of ChM-1 and vascular endothelial growth factor (VEGF) distribution in perforated TMJ disc. RESULTS: Safranin-O stained weakly in TMJ compared with tibial articular and epiphyseal cartilage. In TMJ, ChM-1 was expressed in the proliferative and hypertrophic zone of condylar cartilage and chondrocyte-like cells in the disc. No expression of ChM-1 was observed in osteoblasts and subchondral bone. ChM-1 and VEGF were both similarly expressed in perforated disc tissues. CONCLUSIONS: ChM-1 may play a role in the regulation of TMJ remodeling by preventing blood vessel invasion of the cartilage, thereby maintaining condylar cartilage and disc integrity.

Application of autologous periosteal cells for the regeneration of class III furcation defects in Beagle dogs

The aim of this study was to evaluate the healing of class III furcation defects following transplantation of autogenous periosteal cells combined with b-tricalcium phosphate (b-TCP). Periosteal cells obtained from Beagle dogs’ periosteum explant cultures, were inoculated onto the surface of b-TCP. Class III furcation defects were created in the mandibular premolars. Three experimental groups were used to test the defects’ healing: group A, b-TCP seeded with periosteal cells were transplanted into the defects; group B, b-TCP alone was used for defect filling; and group C, the defect was without filling materials. Twelve weeks post surgery, the tissue samples were collected for histology, immunohistology and X-ray examination. It was found that both the length of newly formed periodontal ligament and the area of newly formed alveolar bone in group A, were significantly increased compared with both group B and C. Furthermore, both the proportion of newly formed periodontal ligament and newly formed alveolar bone in group A were much higher than those of group B and C. The quantity of cementum and its percentage in the defects (group A) were also significantly higher than those of group C. These results indicate that autogenous periosteal cells combined with b-TCP application can improve periodontal tissue regeneration in class III furcation defects.