Investigation on the homogeneity and stability of aqueous nano cellulose suspensions prepared using pluronic F-127

This paper presents the results of experimental investigation on the aqueous dispersion behaviour of micro crystalline cellulose (MCC) prepared using Pluronic F-127. For this purpose, different concentrations (0.5-3.0 wt.%) of MCC were dispersed in water with the help of ultrasonication technique using various concentrations of Pluronic F-127. The homogeneity of the suspensions and agglomerations were characterized by optical and transmission electron microscopy and the concentration of well dispersed MCC was measured using UV-Vis spectroscopy. Also, the suspensions were subjected to high speed ultracentrifugation at 3000 rpm and observed visually for sedimentation and subsequently, concentration was calculated using UV-Vis, in order to assess the long term stability of the suspensions. Based on these experiments, optimum concentration of Pluronic to disperse different MCC concentrations has been suggested.

Microstructural evolution of Au/TiO2 nanocomposite films: The influence of Au concentration and thermal annealing

Nanocomposite thin films consisting of a dielectric matrix, such as titanium oxide (TiO2), with embedded gold (Au) nanoparticles were prepared and will be analysed and discussed in detail in the present work. The evolution of morphological and structural features was studied for a wide range of Au concentrations and for annealing treatments in air, for temperatures ranging from 200 to 800 °C. Major findings revealed that for low Au atomic concentrations (at.%), there are only traces of clustering, and just for relatively high annealing temperatures, T ≥ 500 °C. Furthermore, the number of Au nanoparticles is extremely low, even for the highest annealing temperature, T = 800 °C. It is noteworthy that the TiO2 matrix also crystallizes in the anatase phase for annealing temperatures above 300 °C. For intermediate Au contents (5 at.% ≤ CAu ≤ 15 at.%), the formation of gold nanoclusters was much more evident, beginning at lower annealing temperatures (T ≥ 200 °C) with sizes ranging from 2 to 25 nm as the temperature increased. A change in the matrix crystallization from anatase to rutile was also observed in this intermediate range of compositions. For the highest Au concentrations (> 20 at.%), the films tended to form relatively larger clusters, with sizes above 20 nm (for T ≥ 400 °C). It is demonstrated that the structural and morphological characteristics of the films are strongly affected by the annealing temperature, as well as by the particular amounts, size and distribution of the Au nanoparticles dispersed in the TiO2 matrix.

A systematic study of the structural and magnetic properties of Mn-, Co-, and Ni-Doped Colloidal Fe3O4 nanoparticles

A series of colloidal MxFe3-xO4 (M = Mn, Co, Ni; x = 0–1) nanoparticles with diameters ranging from 6.8 to 11.6 nm was synthesized by hydrothermal reaction in aqueous medium at low temperature (200 °C). Energy-dispersive X-ray microa-nalysis and inductively coupled plasma spectrometry confirms that the actual elemental compositions agree well with the nominal ones. The structural properties of obtained nanoparticles were investigated by using powder X-ray diffraction, Raman scattering, Mössbauer spectroscopy, and electron microscopy. The results demonstrate that our synthesis technique leads to the formation of chemically uniform single-phase solid solution nanoparticles with cubic spinel structure, confirming the intrinsic doping. Magnetic studies showed that, in comparison to Fe3O4, the saturation magnetization of MxFe3-xO4 (M = Mn, Ni) decreases with increasing dopant concentration, while Co-doped samples showed similar saturation magnetizations. On other hand, whereas Mn- and Ni-doped nanoparticles exhibits superparamagnetic behavior at room temperature, ferromagnetism emerges for CoxFe3-xO4 nanoparticles, which can be tuned by the level of Co doping.

Layer-by-layer technique to developing functional nanolaminate films with antifungal activity

The layer-by-layer (LbL) deposition method was used to build up alternating layers (five) of different polyelectrolyte solutions (alginate, zein-carvacrol nanocapsules, chitosan and chitosan-carvacrol emulsions) on an aminolysed/charged polyethylene terephthalate (A/C PET) film. These nanolaminated films were characterised by contact angle measurements and through the determination of water vapour (WVTR) and oxygen (O2TR) transmission rates. The effect of active nanolaminated films against the Alternaria sp. and Rhizopus stolonifer was also evaluated. This procedure allowed developing optically transparent nanolaminated films with tuneable water vapour and gas properties and antifungal activity. The water and oxygen transmission rate values for the multilayer films were lower than those previously reported for the neat alginate or chitosan films. The presence of carvacrol and zein nanocapsules significantly decreased the water transmission rate (up to 40 %) of the nanolaminated films. However, the O2TR behaved differently and was only improved (up to 45 %) when carvacrol was encapsulated, i.e. nanolaminated films prepared by alternating alginate with nanocapsules of zein-carvacrol layers showed better oxygen barrier properties than those prepared as an emulsion of chitosan and carvacrol. These films containing zein-carvacrol nanocapsules also showed the highest antifungal activity (30 %), which did not significantly differ from those obtained with the highest amount of carvacrol, probably due to the controlled release of the active agent (carvacrol) from the zein-carvacrol nanocapsules. Thus, this work shows that nanolaminated films prepared with alternating layers of alginate and zein-carvacrol nanocapsules can be considered to improve the shelf-life of foodstuffs.

Elaboration et caractérisation des nanocristaux de Zn F O enfouis 1-x x dans des diélectriques pour des applications en spin-électronique

Tese de Doutoramento em Ciências - Especialidade em Física

Development and characterization of lipid-based nanosystems for controlled release of bioactive compounds

Tese de Doutoramento em Engenharia Química e Biológica.

Development of polymeric nanoparticles containing neuroprotective compounds of Hypericum perforatum

Tese de Doutoramento em Biologia das Plantas - MAP BIOPLANT

Beeswax organogels: Influence of gelator concentration and oil type in the gelation process

This work focused on how different types of oil phase, MCT (medium chain triglycerides) and LCT (long chain triglycerides), exert influence on the gelation process of beeswax and thus properties of the organogel produced thereof. Organogels were produced at different temperatures and qualitative phase diagrams were constructed to identify and classify the type of structure formed at various compositions. The microstructure of gelator crystals was studied by polarized light microscopy. Melting and crystallization were characterized by differential scanning calorimetry and rheology (flow and small amplitude oscillatory measurements) to understand organogels' behaviour under different mechanical and thermal conditions. FTIR analysis was employed for a further understanding of oil-gelator chemical interactions. Results showed that the increase of beeswax concentration led to higher values of storage and loss moduli (G, G) and complex modulus (G*) of organogels, which is associated to the strong network formed between the crystalline gelator structure and the oil phase. Crystallization occurred in two steps (well evidenced for higher concentrations of gelator) during temperature decreasing. Thermal analysis showed the occurrence of hysteresis between melting and crystallization. Small angle X-ray scattering (SAXS) analysis allowed a better understanding in terms of how crystal conformations were disposed for each type of organogel. The structuring process supported by medium or long-chain triglycerides oils was an important exploit to apprehend the impact of different carbon chain-size on the gelation process and on gels' properties.

Fontan Operation and the Cavopulmonary Technique: Immediate and Late Results According to the Presence of Atrial Fenestration

OBJECTIVE: To compare immediate and late results in patients with or without fenestration who underwent cavopulmonary anastomosis so that we could assess the efficiency of the technique. METHODS: Sixty-two patients underwent surgery between 1988 and 1999, 41 with fenestration (group I -G I) and 21 without fenestration (group II -G II). Tricuspid atresia was prevalent in group I (23-56%) and single ventricle was prevalent in group II (14-66%). Mean ages at the time of operation were 7.3 years in group I and 7.6 in group II. At late follow-up, mean ages were 10.6 years in group I and 12.8 years in group II. RESULTS: Immediate and late mortality were 7.3% in G-I and 4.7% in G-II. Significant pleural effusion occurred in 41.4% of G-I patients and in 23.8% of G-II patients. Significant pericardial effusion occurred in 29.2% and 14.2%, respectively, in groups I and II. Central venous pressure was greater in G-II, 17.7 cm in H2O, as opposed to 15 cm in G-I. Hospital stay was similar between the groups, 26.3 and 21.8 days, respectively. Cyanosis and arterial insaturation occurred in 5 patients, and 4 patients were in functional class II, all from G-I. At late follow-up, 58 (93.5%) were in functional class I. Sinus rhythm was present in 94%, and pulmonary perfusion was similar in both groups. Eleven patients who underwent spirometry had good tolerance to physical effort. CONCLUSION: Atrial fenestration did not improve the immediate or late follow-up of patients who underwent cavopulmonary anastomosis, and is, therefore, dispensable.

Using one-year claim development to chose a large claim reserving technique

Mestrado em Ciências Actuariais

Los objetos técnicos y los organismos tecnificados. Reflexiones filosóficas, estéticas y políticas sobre la técnica. Technical objects and technified organisms. Philosophical, aesthetical and political approaches on technique

El presente proyecto se propone como parte inicial de una investigación sobre la relación entre naturaleza/cultura/técnica. Tradicionalmente la naturaleza y la cultura se han considerado como ámbitos diferenciados y opuestos. Y es en esta distinción donde la técnica adquiere un lugar central. El pensamiento occidental sobre la técnica ha recibido diversas interpretaciones: desde una subordinación con respecto al conocimiento verdadero (episteme) en la filosofía clásica, un optimismo sobre la técnica como posibilidad de dominación de la naturaleza en el Renacimiento y la Ilustración, y la ambigüedad y desasosiego romántico (Mitcham, 1979). Durante el siglo XX se distinguen dos posiciones antagónicas sobre la técnica. Por un lado, una actitud “crítica” donde pueden identificarse los trabajos de filósofs de diferentes tradiciones como Ortega y Gasset (1939), Heidegger (1954), Mumford (1971) Ellul (1960) y la Escuela de Frankfurt. Por otro lado, una filosofía de la técnica “ingenieril” que consiste en el análisis de la tecnología como un paradigma de pensamiento y acción humana. Esta dicotomía ha sido interpretada por Eco como “apocalípticos e integrados”. Más allá de las mencionadas diferencias, lo que tienen en común ambas posiciones es que parten de una dicotomía entre cultura y naturaleza. Nuestra perspectiva rechaza esta dicotomía, por el contrario, evidenciamos una creciente imbricación entre ambas donde las fronteras entre una y otra se hacen difusas. La noción de “objeto técnico” propuesta por Simondon (2007) hace referencia a la inserción del objeto técnico en la cultura, donde debe reconocerse la “realidad humana” presente en el mismo. Ahora bien, esto no significa “humanizar el objeto técnico”, sino más bien indagar sobre el lugar que este ocupa en la cultura como también establecer su relación con la naturaleza. En el siglo XVII el hombre mismo es reinterpretado como máquina (La Mettrie, 2000). En la actualidad pueden identificarse dos tendencias en la concepción de la técnica: los «humanos-máquinas» y las «máquinas-humanas», en otras palabras, la disposición del humano hacia la máquina y la tendencia de la máquina hacia lo humano. No obstante, ambas posiciones siguen manteniendo una distinción taxonómica entre el cuerpo –o lo orgánico- y lo maquínico, lo que implica una consideración de esta relación de manera extrínseca. Frente a esta tensión Haraway propone el concepto de cyborg: «un organismo cibernético» (1995). Los desarrollos tecnológicos han producido una modificación tal en la vida de los seres orgánicos en los cuales ya no puede concebirse su cuerpo independientemente de la tecnología. Esto conduce a replantear la distinción entre “animales/hombres/máquinas”, entendiendo a los mismos como expresiones de naturaleza, cultura y tecnología respectivamente. Nuestra investigación parte de la hipótesis que la técnica diluye diferencias de orden natural y cultural a través de los objetos técnicos que son productos culturales. La estética se ocupa de la percepción sensible del mundo no puede eludir su dimensión técnica. Al margen de la crítica a la “Industria cultural” consideramos relevante la aproximación de Benjamin al problema de la técnica porque aborda la imbricación antes mencionada en el campo de la percepción. Según Benjamin la irrupción de la técnica al mismo tiempo que posibilita una estetización de la política que confluye en el fascismo como punto extremo también abre la posibilidad de desmontar la ideología del progreso infinito (1967). Una integración entre aproximaciones estéticas y políticas a la técnica Flusser (1983) propone la “caja negra” como metáfora de la técnica contemporánea. Su propuesta es la “apertura de la caja negra” que consiste en tomar conocimiento del funcionamiento del dispositivo. Nuestra propuesta de investigación aborda la técnica desde una consideración filosófica/estética/política, donde redefiniremos la técnica partiendo de la imbricación entre cultura y naturaleza. This project will set the basis for a sustained research on the relation nature/culture/technique. They have been traditionally considered as separate and even opposite fields. And it is on the brink of this distinction where technique plays a central role. In Western thought technique has received many interpretations since the beginnings of philosophy: from a subordination to true knowledge (episteme) in classic philosophy, or the optimism which sees in technique the possibility of dominating nature in the Renaissance and in the Enlightenment, to the Romantic ambiguity and uneasiness towards technological change (Mitcham, 1979). During the twentieth century two opposed approach on technique prevail. On one hand, a “critical” attitude such defines the work of philosophers of different traditions such as Ortega y Gasset (1939), Heidegger (1954), Mumford (1971) Ellul (1960) and the Frankfurt School. On the other hand there is an “engineering” philosophy of technique that consists in the analisis of technology as a paradigm to understand human action and thought. Besides their differences, both positions have in common a dichotomy between nature and culture. We reject such dichotomy. On the contrary we consider there is a growing intertwinement between both which blurs the borders of the concepts. Simondon’s notion of “technical object” refers to the insertion of the technique in culture where the “human reality” in it must be recognised. This does not imply “humanising the technical object”, but investigate on the role it plays on culture and establishing its relation to nature. To articulate this relation we will work with unorthodox approaches on technique such as Benjamin (1967), Flusser (1983) and others. The hypothesis of our project is that the traditional distinction of “animal/man/machine” must be re-thought, therefore raising the question on the blurring line between nature, culture and technique and its effects in philosophy, politics and aesthetics.

Some results of study of variations of light ions concentration and their connections with the ionizing radiation and sub-micron aerosol content in air under the conditions of Tbilisi city

Results of analysis of variations of sum light ions concentration and their connections with radon, galactic cosmic rays intensity and content of sub-micron aerosols by diameter ≥ 0.1 micron in surface boundary layer of Tbilisi city are given.

Changeability of Surface Ozone Concentration in Tbilisi in 1984-2010

მოყვანილია ქალაქ თბილისში 1984-დან 2010 წლებში მიწისპირა ოზონის კონცენტრაციის საშუალო ნახევარწლიური და წლიური მონაცემების დეტალური სტატისტიკური ანალიზის შედეგები.