Heavy metal tolerance patterns of total heterotrophic bacteria isolated from the soils of Mahatma Gandhi University campus, Kottayam, Kerala

Industrialization of our society has led to an increased production and discharge of both xenobiotic and natural chemical substances. Many of these chemicals will end up in the soil. Pollution of soils with heavy metals is becoming one of the most severe ecological and human health hazards. Elevated levels of heavy metals decrease soil microbial activity and bacteria need to develop different mechanisms to confer resistances to these heavy metals. Bacteria develop heavy-metal resistance mostly for their survivals, especially a significant portion of the resistant phenomena was found in the environmental strains. Therefore, in the present work, we check the multiple metal tolerance patterns of bacterial strains isolated from the soils of MG University campus, Kottayam. A total of 46 bacterial strains were isolated from different locations of the campus and tested for their resistant to 5 common metals in use (lead, zinc, copper, cadmium and nickel) by agar dilution method. The results of the present work revealed that there was a spatial variation of bacterial metal resistance in the soils of MG University campus, this may be due to the difference in metal contamination in different sampling location. All of the isolates showed resistance to one or more heavy metals selected. Tolerance to lead was relatively high followed by zinc, nickel, copper and cadmium. About 33% of the isolates showed very high tolerance (>4000μg/ml) to lead. Tolerance to cadmium (65%) was rather low (<100 μg/ml). Resistance to zinc was in between 100μg/ml - 1000μg/ml and the majority of them shows resistance in between 200μg/ml - 500μg/ml. Nickel resistance was in between 100μg/ml - 1000μg/ml and a good number of them shows resistance in between 300μg/ml - 400μg/ml. Resistance to copper was in between <100μg/ml - 500μg/ml and most of them showed resistance in between 300μg/ml - 400μg/ml. From the results of this study, it was concluded that heavy metal-resistant bacteria are widely distributed in the soils of MG university campus and the tolerance of heavy metals varied among bacteria and between locations

Probiotic Effects of Lactic Acid Bacteria Against Vibrio Alginolyticus in Penaeus (Fenneropenaeus) Indicus (H. Milne Edwards)

Cell free extracts of four strains of Lactic acid bacteria (LAB) viz. Lactobacillus. acidophilus, Streptococcus.cremoris, Lactobacillus bulgaricus –56 and Lactobacillus bulgaricus –57 inhibited growth of Vibrio alginolyticus in nutrient broth. The antagonism of LAB to Vibrio alginolyticus was further confirmed by streak plating wherein suppression of growth of Vibrio was obtained. Juveniles of Penaeus indicus (average weight 0.985 ± 0.1 g) on administering orally a moist feed base containing 5 × 106 cells·g of the four LAB probionts for a period of four weeks showed better survival (56 to 72%) when challenged with V. alginolyticus by intra-muscular injection of 0.1 ml containing 3 × 109 cells·ml. Animals maintained on a diet devoid of bacterial biomass exhibited 80% mortality. No external or internal pathological changes were observed in shrimp fed with the LAB incorporated diets. Results showed inhibition of V. alginolyticus by LAB and stimulation of the non-specific immune response resulting in resistance to disease in the shrimp fed on LAB incorporated diets.

Application of primary haemocyte culture of Penaeus monodon in the assessment of cytotoxicity and genotoxicity of heavy metals and pesticides

Lack of shrimp cell lines has hindered the study of pollutants which adversely affects shrimp health and its export value. In this context a primary haemocyte culture developed from Penaeus monodon was employed for assessing the cytotoxicity and genotoxicity of two heavy metal compounds, cadmium chloride and mercuric chloride and two organophosphate insecticides, malathion and monocrotophos. Using MTT assay 12 h IC50 values calculated were 31.09 16.27 mM and 5.52 1.16 mM for cadmium chloride and mercuric chloride and 59.94 52.30 mg l 1 and 186.76 77.00 mg l 1 for malathion and monocrotophos respectively. Employing Comet assay, DNA damage inflicted by these pollutants on haemocytes were evaluated and the pollutants induced DNA damage in >60% of the cells. The study suggested that haemocyte culture could be used as a tool for quantifying cytotoxicity and genotoxicity of aquaculture drugs, management chemicals and pollutants

Toxic Metal Distribution in the Core Sediment of Cochin Estuarine System (CES)

This article present the result from a study of two sediment cores collected from the environmentally distinct zones of CES. Accumulation status of five toxic metals: Cadmium (Cd), Chromium (Cr), Cobalt (Co), Copper (Cu) and Lead (Pb) were analyzed. Besides texture and CHNS were determined to understand the composition of the sediment. Enrichment Factor (EF) and Anthropogenic Factor (AF) were used to differentiate the typical metal sources. Metal enrichment in the cores revealed heavy load at the northern (NS1 ) region compared with the southern zone (SS1). Elevation of metal content in core NS1 showed the industrial input. Statistical analyses were employed to understand the origin of metals in the sediment samples. Principal Component Analysis (PCA) distinguishes the two zones with different metal accumulation capacity: highest at NS1 and lowest at SS1. Correlation analysis revealed positive significant relation only in core NS1, adhering to the exposition of the intensified industrial pollution

Studies on Landfill Leachate Transportation and Its Impact on Soil Characteristics

Leachate from an untreated landfill or landfill with damaged liners will cause the pollution of soil and ground water. Here an attempt was made to generate knowledge on concentrations of all relevant pollutants in soil due to municipal solid waste landfill leachate and its migration through soil and also to study the effect of leachate on the engineering properties of soil. To identify the pollutants in soil due to the leachate generated from municipal solid waste landfill site, a case study on an unlined municipal solid waste landfill at Kalamassery has been done. Soil samples as well as water samples were collected from the site and analysed to identify the pollutants and its effect on soil characteristics. The major chemicals in the soil were identified as Ammonia, Chloride, Nitrate, Iron, Nickel, Chromium, Cadmium etc.. Engineering properties of field soil samples show that the chemicals from the leachate of landfill may have effect on the engineering properties of soil. Laboratory experiments were formulated to model the field around an unlined MSW landfill using two different soils subjected to a synthetic leachate. The Maximum change in chemical concentration and engineering property was observed on soil samples at a radial distance of 0.2 m and at a depth of 0.3 m. The pollutant (chemicals) transport pattern through the soil was also studied using synthetic leachate. To establish the effect of pollutants (chemicals) on engineering properties of soil, experiments were conducted on two types soils treated with the synthetic chemicals at four different concentrations. Analyses were conducted after maturing periods of 7, 50, 100 and 150 days. Test soils treated with maximum chemical concentration and matured for 150 days were showing major change in the properties. To visualize the flow of pollutants through soil in a broader sense, the transportation of pollutants through soil was modeled using software ‘Visual MODFLOW’. The actual field data collected for the case study was used to calibrate the modelling and thus simulated the flow pattern of the pollutants through soil around Kalamassery municipal solid waste landfill for an extent of 4 km2. Flow was analysed for a time span of 30 years in which the landfill was closed after 20 years. The concentration of leachate beneath the landfill was observed to be reduced considerably within one year after closure of landfill and within 8 years, it gets lowered to a negligible level. As an environmensstal management measure to control the pollution through leachate, permeable reactive barriers are used as an emerging technology. Here the suitability of locally available materials like coir pith, rice husk and sugar cane bagasse were investigated as reactive media in permeable reactive barrier. The test results illustrates that, among these, coir pith was showing better performance with maximum percentage reduction in concentration of the filtrate. All these three agricultural wastes can be effectively utilized as a reactive material. This research establishes the influence of leachate of municipal solid waste landfill on the engineering properties of soil. The factors such as type of the soil, composition of leachate, infiltration rate, aquifers, ground water table etc., will have a major role on the area of influence zone of the pollutants in a landfill. Software models of the landfill area can be used to predict the extent and the time span of pollution of a landfill, by inputting the accurate field parameters and leachate characteristics. The present study throws light on the role of agro waste materials on the reduction of the pollution in leachate and thus prevents the groundwater and soil from contamination

Strength Predictions of Hat Stiffened Plate

Hat Stiffened Plates are used in composite ships and are gaining popularity in metallic ship construction due to its high strength-to-weight ratio. Light weight structures will result in greater payload, higher speeds, reduced fuel consumption and environmental emissions. Numerical Investigations have been carried out using the commercial Finite Element software ANSYS 12 to substantiate the high strength-to-weight ratio of Hat Stiffened Plates over other open section stiffeners which are commonly used in ship building. Analysis of stiffened plate has always been a matter of concern for the structural engineers since it has been rather difficult to quantify the actual load sharing between stiffeners and plating. Finite Element Method has been accepted as an efficient tool for the analysis of stiffened plated structure. Best results using the Finite Element Method for the analysis of thin plated structures are obtained when both the stiffeners and the plate are modeled using thin plate elements having six degrees of freedom per node. However, one serious problem encountered with this design and analysis process is that the generation of the finite element models for a complex configuration is time consuming and laborious. In order to overcome these difficulties two different methods viz., Orthotropic Plate Model and Superelement for Hat Stiffened Plate have been suggested in the present work. In the Orthotropic Plate Model geometric orthotropy is converted to material orthotropy i.e., the stiffeners are smeared and they vanish from the field of analysis and the structure can be analysed using any commercial Finite Element software which has orthotropic elements in its element library. The Orthotropic Plate Model developed has predicted deflection, stress and linear buckling load with sufficiently good accuracy in the case of all four edges simply supported boundary condition. Whereas, in the case of two edges fixed and other two edges simply supported boundary condition even though the stress has been predicted with good accuracy there has been large variation in the deflection predicted. This variation in the deflection predicted is because, for the Orthotropic Plate Model the rigidity is uniform throughout the plate whereas in the actual Hat Stiffened Plate the rigidity along the line of attachment of the stiffeners to the plate is large as compared to the unsupported portion of the plate. The Superelement technique is a method of treating a portion of the structure as if it were a single element even though it is made up of many individual elements. The Superelement has predicted the deflection and in-plane stress of Hat Stiffened Plate with sufficiently good accuracy for different boundary conditions. Formulation of Superelement for composite Hat Stiffened Plate has also been presented in the thesis. The capability of Orthotropic Plate Model and Superelement to handle typical boundary conditions and characteristic loads in a ship structure has been demonstrated through numerical investigations.

Ferrocene-Based Pyridylphosphine Ligands – Coordination Chemistry of Group 10, 11 and 12 Metals

English: The present thesis describes the synthesis of 1,1’-ferrocendiyl-based pyridylphosphine ligands, the exploration of their fundamental coordination chemistry and preliminary experiments with selected complexes aimed at potential applications. One main aspect is the synthesis of the bidentate ferrocene-based pyridylphosphine ligands 1-(Pyrid-2-yl)-1’-diphenylphosphinoferrocene, 1-(Pyrid-3-yl)-1’-diphenylphosphinoferrocene and 1-[(Pyrid-2-yl)methyl]-1’-diphenylphosphinoferrocene. A specific feature of these ligands is the ball-bearing like flexibility of the ferrocenebased backbone. An additional flexibility element is the rotation around the C–C single bonds. Consequently, the donor atoms can realise a wide range of positions with respect to each other and are therefore able to adapt to the coordination requirements of different metal centres. The flexibility of the ligand also plays a role in another key aspect of this work, which concerns the coordination mode, i. e. bridging vs. chelating. In addition to the flexibility, also the position of the donor atoms to each other is important. This is largely affected by the position of the pyridyl nitrogen (pyrid-2-yl vs. pyrid-3-yl) and the methylen group in 1-[(Pyrid-2-yl)methyl]-1’-diphenylphosphinoferrocene. Another interesting point is the combination of a soft phosphorus donor atom with a harder nitrogen donor atom, according to the HSAB principle. This combination generates a unique binding profile, since the pi-acceptor character of the P site is able to stabilise a metal centre in a low oxidation state, while the nitrogen sigma-donor ability can make the metal more susceptible to oxidative addition reactions. A P,N-donor combination can afford hemilabile binding profiles, which would be ideal for catalysis. Beyond 1,2-substituted ferrocene derivatives, which are quite successful in catalytic applications, 1,1’-derivatives are rather underrepresented. While a low-yield synthetic pathway to 1-(Pyrid-2-yl)-1’-diphenylphosphinoferrocene was already described in the literature [I. R. Butler, Organometallics 1992, 11, 74.], it was possible to find a new, improved and simplified synthetic pathway. Both other ligands were unknown prior to this work. Satisfactory results in the synthesis of 1-(Pyrid-3-yl)-1’-diphenylphosphinoferrocene could be achieved by working in analogy to the new synthetic procedure for 1-(Pyrid-2-yl)-1’-diphenylphosphinoferrocene. The synthesis of 1-[(Pyrid-2-yl)methyl]-1’-diphenylphosphinoferrocene has been handled by the group of Prof. Petr Stepnicka from Charles University, Prague, Czech Republic. The synthesis of tridentate ligands with an analogous heterodentate arrangement, was investigated briefly as a sideline of this study. The major part of this thesis deals with the fundamental coordination chemistry towards transition metals of the groups 10, 11 and 12. Due to the well-established catalytic properties of analogous palladium complexes, the coordination chemistry towards palladium (group 10) is of particular interest. The metals zinc and cadmium (group 12) are also of substantial importance because they are redox-inert in their divalent state. This is relevant in view of electrochemical investigations concerning the utilisation of the ligands as molecular redox sensors. Also mercury and the monovalent metals silver and gold (group 11) are included because of their rich coordination chemistry. It is essential to answer questions concerning aspects of the ligands’ coordination mode bearing in mind the HSAB principle.

Heavy metal and microbial loads in sewage irrigated vegetables of Kabul, Afghanistan

Little is known about the heavy metal and microbial contamination of vegetables produced in Central Asian cities. We therefore measured the concentration of cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) and of faecal pathogens (Coliform bacteria, Salmonella sp., Shigella sp., Ascaris lubricoides, Entamoeba sp. and pinworms [Oxyuris vermicularis syn. Enterobius vermicularis]) in soil, irrigation water, and marketed vegetables of Kabul City, Afghanistan. Leaf Pb and Zn concentrations of leafy vegetables were with 1–5 and 33–160 mg kg^{-1} dry weight (DW) several-fold above respective international thresholds of 0.3 mg Pb kg^{-1} and 50 mg Zn kg^{-1}. The tissue concentration of Cu was below threshold limits in all samples except for spinach in one farm. Above-threshold loads of microbes and parasites on vegetables were found in five out of six gardens with coliforms ranging from 0.5–2 × 10^7 cells 100g^{-1} fresh weight (FW), but no Salmonella and Shigella were found. Contamination with 0.2 × 10^7 eggs 100g^{-1} FW of Ascaris was detected on produce of three farms and critical concentrations of Entamoeba in a single case, while Oxyuris vermicularis, and Enterobius vermicularis were found on produce of three and four farms, respectively. Irrigation water had Ascaris, Coliforms, Salmonella, Shigella, Entamoeba, and Oxyuris vermicularis syn. Enterobius vermicularis ranging from 0.35 × 10^7 to 2 × 10^7 cells l^{-1}. The heavy metal and microbial loads on fresh UPA vegetables are likely the result of contamination from rising traffic, residues of the past decades of war and lacking treatment of sewage which needs urgent attention.

Urban and peri-urban agricultural production along railway tracks: a case study from the Mumbai Metropolitan Region

Urban and peri-urban agriculture (UPA) contributes to food security, serves as an opportunity for income generation, and provides recreational services to urban citizens. With a population of 21 Million people, of which 60 % live in slums, UPA activities can play a crucial role in supporting people’s livelihoods in Mumbai Metropolitan Region (MMR). This study was conducted to characterize the railway gardens, determine their role in UPA production, and assess potential risks. It comprises a baseline survey among 38 railway gardeners across MMR characterized by different demographic, socio-economic, migratory, and labour characteristics. Soil, irrigation water, and plant samples were analyzed for nutrients, heavy metals, and microbial load. All the railway gardeners practiced agriculture as a primary source of income and cultivated seasonal vegetables such as lady’s finger (Abelmoschus esculentus L. Moench), spinach (Spinacia oleracea L.), red amaranth (Amaranthus cruentus L.), and white radish (Raphanus sativus var. longipinnatus) which were irrigated with waste water. This irrigation water was loaded with 7–28 mg N l^(−1), 0.3–7 mg P l^(−1), and 8–32 mg K l^(−1), but also contained heavy metals such as lead (0.02–0.06 mg Pb l^(−1)), cadmium (0.03–0.17 mg Cd l^(−1)), mercury (0.001–0.005 mg Hg l^(−1)), and pathogens such as Escherichia coli (1,100 most probable number per 100 ml). Levels of heavy metals exceeded the critical thresholds in surface soils (Cr, Ni, and Sr) and produce (Pb, Cd, and Sr). The railway garden production systems can substantially foster employment and reduce economic deprivation of urban poor particularly slum dwellers and migrant people. However this production system may also cause possible health risks to producers and consumers.

Presión arterial en preescolares de la localidad de Usaquén en Bogotá

Introducción: La hipertensión arterial es un problema de salud pública tanto en países industrializados como en vía de desarrollo. Su prevalencia en la infancia viene en aumento por lo que es relevante determinarla en niños preescolares a nivel local. Objetivo: Determinar la prevalencia de hipertensión arterial en niños de tres a cinco años de una cohorte de 14 hogares infantiles del ICBF de la localidad de Usaquén en Bogotá. Materiales y métodos: Se realizó un estudio de corte transversal analítico, utilizando la base de datos de un ensayo aleatorizado y controlado del año 200913, y se evaluaron las cifras de tensión arterial de acuerdo a sexo, edad, talla y su correlación con el IMC con un nivel de confianza del 95% y precisión del 1%. Se calcularon las medias, desviaciones estándar, percentiles y prevalencia. Resultados: Se obtuvo una muestra de 1035 casos, encontrándose una prevalencia de 4,5% de HTA sistólica, 10,4% de diastólica, ambas en estadio I; teniendo en cuenta tanto sistólica como diastólica, fue de 11,6% en estadio I. Se determinaron los valores de presión arterial sistólica y diastólica en cuartiles de acuerdo a edad, sexo y talla. El coeficiente de correlación entre el IMC y los niveles de presión arterial sistólica y diastólica fueron de 0.0992 y 0.0362 respectivamente. Conclusión: La prevalencia de HTA general fue de 11,6%, predominando la diastólica en estadio I en niños preescolares. No se encontró correlación entre el IMC y las cifras de tensión arterial sistólica y diastólica.

Convergencia de vías de señalización en un modelo de apoptosis

La sepsis es un evento inflamatorio generalizado del organismo inducido por un daño causado generalmente por un agente infeccioso. El patógeno más frecuentemente asociado con esta entidad es el Staphylococcus aureus, responsable de la inducción de apoptosis en células endoteliales debida a la producción de ceramida. Se ha descrito el efecto protector de la proteína C activada (PCA) en sepsis y su relación con la disminución de la apoptosis de las células endoteliales. En este trabajo se analizó la activación de las quinasas AKT, ASK1, SAPK/JNK y p38 en un modelo de apoptosis endotelial usando las técnicas de Western Blotting y ELISA. Las células endoteliales (EA.hy926), se trataron con C2-ceramida (130μM) en presencia de inhibidores químicos de cada una de estas quinasas y PCA. La supervivencia de las células en presencia de inhibidores químicos y PCA fue evaluada por medio de ensayos de activación de las caspasas 3, 7 y 9, que verificaban la muerte celular por apoptosis. Los resultados evidencian que la ceramida reduce la activación de AKT y aumenta la activación de las quinasas ASK, SAPK/JNK y p38, en tanto que PCA ejerce el efecto contrario. Adicionalmente se encontró que la tiorredoxina incrementa la activación/fosforilación de AKT, mientras que la quinasa p38 induce la defosforilación de AKT.

Comprobando la integridad del trayecto pedicular torácico: ¿es valido el uso del palpador pedicular? Técnica en cadáveres

Introducción: En la práctica neuroquirurgica el uso de tornillos pediculares torácicos ha venido en aumento en el tratamiento de diferentes patologías de la espinales. Desde la descripción original, se confirma la adecuada canalización del trayecto mediante el uso del palpador, sin embargo la validez y seguridad de dicho instrumento es limitada y existe riesgo de complicaciones complejas. En este estudio se comprueba la seguridad y validez del uso del palpador para diagnosticar la integridad del trayecto pedicular torácico. Metodología: Se canalizaron pedículos torácicos en especímenes cadavéricos los cuales de manera aleatoria se clasificaron como normales (íntegros) o anormales (violados). Posteriormente cuatro cirujanos de columna, con diferentes grados de experticia, evaluaron el trayecto pedicular. Se realizaron estudios de concordancia obteniendo coeficiente Kappa, porcentaje total de precisión, sensibilidad, especificidad, VPP y VPN y el área bajo la curva ROC para determinar la precisión de la prueba. Resultados: La precisión y validez en el diagnostico del trayecto pedicular y localización del sitio de violación tienen relación directa con la experiencia y entrenamiento del cirujano, el evaluador con mayor experiencia obtuvo los mejores resultados. El uso del palpador tiene una buena precisión, área bajo la curva ROC 0.86, para el diagnostico de las lesiones pediculares. Discusión: La evaluación precisa del trayecto pedicular, presencia o ausencia de una violación, es dependiente del grado de experiencia del cirujano, adicionalmente la precisión diagnostica de la violación varía según la localización de esta.

Avaluació de la toxicitat de metalls pesants i arsènic en diferents models biològics

En aquest estudi, la toxicitat de diversos metalls pesants i l'arsènic va ser analitzada utilitzant diferents models biològics. En la primera part d'aquest treball, el bioassaig de toxicitat Microtox, el qual està basat en la variació de l'emissió lumínica del bacteri luminiscent Vibrio fischeri, va ser utilitzat per establir les corbes dosi-resposta de diferents elements tòxics com el Zn(II), Pb(II), Cu(II), Hg(II), Ag(I), Co(II), Cd(II), Cr(VI), As(V) i As(III) en solucions aquoses. Els experiments es varen portar a terme a pH 6.0 i 7.0 per tal de mostrar que el pH pot influir en la toxicitat final mesurada d'alguns metalls degut als canvis relacionats amb la seva especiació química. Es varen trobar diferents tipus de corbes dosi-resposta depenent del metall analitzat i el pH del medi. En el cas de l'arsènic, l'efecte del pH en la toxicitat de l'arsenat i l'arsenit es va investigar utilitzant l'assaig Microtox en un rang de pHs comprès entre pH 5.0 i 9.0. Els valors d'EC50 determinats per l'As(V) disminueixen, reflectint un augment de la toxicitat, a mesura que el pH de la solució augmenta mentre que, en el cas de l'As(III), els valors d'EC50 quasi bé no varien entre pH 6.0 i 8.0 i només disminueixen a pH 9.0. HAsO42- i H2AsO3- es varen definir com les espècies més tòxiques. Així mateix, una anàlisi estadística va revelar un efecte antagònic entre les espècies químiques d'arsenat que es troben conjuntament a pH 6.0 i 7.0. D'altra banda, els resultats de dos mètodes estadístics per predir la toxicitat i les possibles interaccions entre el Co(II), Cd(II), Cu(II), Zn(II) i Pb(II) en mescles binàries equitòxiques es varen comparar amb la toxicitat observada sobre el bacteri Vibrio fischeri. L'efecte combinat d'aquests metalls va resultar ser antagònic per les mescles de Co(II)-Cd(II), Cd(II)-Zn(II), Cd(II)-Pb(II) i Cu(II)-Pb(II), sinèrgic per Co(II)-Cu(II) i Zn(II)-Pb(II) i additiu en els altres casos, revelant un patró complex de possibles interaccions. L'efecte sinèrgic de la combinació Co(II)-Cu(II) i la forta disminució de la toxicitat del Pb(II) quan es troba en presència de Cd(II) hauria de merèixer més atenció quan s'estableixen les normatives de seguretat ambiental. La sensibilitat de l'assaig Microtox també va ser determinada. Els valors d'EC20, els quals representen la toxicitat llindar mesurable, varen ser determinats per cada element individualment i es va veure que augmenten de la següent manera: Pb(II) < Ag(I) < Hg(II)  Cu(II) < Zn(II) < As(V) < Cd(II)  Co(II) < As(III) < Cr(VI). Aquests valors es varen comparar amb les concentracions permeses en aigues residuals industrials establertes per la normativa oficial de Catalunya (Espanya). L'assaig Microtox va resultar ser suficientment sensible per detectar els elements assajats respecte a les normes oficials referents al control de la contaminació, excepte en el cas del cadmi, mercuri, arsenat, arsenit i cromat. En la segona part d'aquest treball, com a resultats complementaris dels resultats previs obtinguts utilitzant l'assaig de toxicitat aguda Microtox, els efectes crònics del Cd(II), Cr(VI) i As(V) es varen analitzar sobre la taxa de creixement i la viabilitat en el mateix model biològic. Sorprenentment, aquests productes químics nocius varen resultar ser poc tòxics per aquest bacteri quan es mesura el seu efecte després de temps d'exposició llargs. Tot i això, en el cas del Cr(VI), l'assaig d'inhibició de la viabilitat va resultar ser més sensible que l'assaig de toxicitat aguda Microtox. Així mateix, també va ser possible observar un clar fenomen d'hormesis, especialment en el cas del Cd(II), quan s'utilitza l'assaig d'inhibició de la viabilitat. A més a més, diversos experiments es varen portar a terme per intentar explicar la manca de toxicitat de Cr(VI) mostrada pel bacteri Vibrio fischeri. La resistència mostrada per aquest bacteri podria ser atribuïda a la capacitat d'aquest bacteri de convertir el Cr(VI) a la forma menys tòxica de Cr(III). Es va trobar que aquesta capacitat de reducció depèn de la composició del medi de cultiu, de la concentració inicial de Cr(VI), del temps d'incubació i de la presència d'una font de carboni. En la tercera part d'aquest treball, la línia cel·lular humana HT29 i cultius primaris de cèl·lules sanguínies de Sparus sarba es varen utilitzar in vitro per detectar la toxicitat llindar de metalls mesurant la sobreexpressió de proteines d'estrès. Extractes de fangs precedents de diverses plantes de tractament d'aigues residuals i diferents metalls, individualment o en combinació, es varen analitzar sobre cultius cel·lulars humans per avaluar el seu efecte sobre la taxa de creixement i la capacitat d'induir la síntesi de les proteïnes Hsp72 relacionades amb l'estrès cel·lular. No es varen trobar efectes adversos significatius quan els components s'analitzen individualment. Nogensmenys, quan es troben conjuntament, es produeix un afecte advers sobre tan la taxa de creixement com en l'expressió de proteins d'estrès. D'altra banda, cèl·lules sanguínies procedents de Sparus sarba es varen exposar in vitro a diferents concentracions de cadmi, plom i crom. La proteïna d'estrès HSP70 es va sobreexpressar significativament després de l'exposició a concentracions tan febles com 0.1 M. Sota les nostres condicions de treball, no es va evidenciar una sobreexpressió de metal·lotioneïnes. Nogensmenys, les cèl·lules sanguínies de peix varen resultar ser un model biològic interessant per a ser utilitzat en anàlisis de toxicitat. Ambdós models biològics varen resultar ser molt adequats per a detectar acuradament la toxicitat produïda per metalls. En general, l'avaluació de la toxicitat basada en l'anàlisi de la sobreexpressió de proteïnes d'estrès és més sensible que l'avaluació de la toxicitat realitzada a nivell d'organisme. A partir dels resultats obtinguts, podem concloure que una bateria de bioassaigs és realment necessària per avaluar acuradament la toxicitat de metalls ja que existeixen grans variacions entre els valors de toxicitat obtinguts emprant diferents organismes i molts factors ambientals poden influir i modificar els resultats obtinguts.

Development of chemical separation processes for the treatment and monitoring of metallic cations and oxoanions in polluted waters

The chemical contamination of natural waters is a global problem with a worldwide impact. Considering the relevance of this problem, this thesis is intended, on one hand, to develop different separation/preconcentration techniques based on membranes ability to permeate anions for the transport of toxic oxyanions of chromium(VI) and arsenic contained in aqueous matrices. In particular, we have investigated supported liquid membranes and polymer inclusion membranes, both of which contain the commercial quaternary ammonium salt Aliquat 336 as a carrier, as well as commercial anion exchange membranes. On the other hand, we have focused on the development of chemical sensors to facilitate the monitoring of several metals from different aqueous matrices. Thus, a selective optical sensor for Cr(VI) based on polymeric membranes containing Aliquat 336 as an ionophore has been designed. Additionally, mercury-based screen-printed electrodes have been evaluated for for cadmium, lead, copper and zinc detection.

Simulating metals and mine discharges in river basins using a new integrated catchment model for metals: pollution impacts and restoration strategies in the Aries-Mures river system in Transylvania, Romania

The INtegrated CAtchment (INCA) model has been developed to simulate the impact of mine discharges on river systems. The model accounts for the key kinetic chemical processes operating as well as the dilution, mixing and redistribution of pollutants in rivers downstream of mine discharges or acid rock drainage sites. The model is dynamic and simulates the day-to-day behaviour of hydrology and eight metals (cadmium, mercury, copper, zinc, lead, arsenic, manganese and chromium) as well as cyanide and ammonia. The model is semi-distributed and can simulate catchments, sub-catchment and in-stream river behaviour. The model has been applied to the Roia Montan Mine in Transylvania, Romania, and used to assess the impacts of old mine adits on the local catchments as well as on the downstream Aries and Mures river system. The question of mine restoration is investigated and a set of clean-up scenarios investigated. It is shown that the planned restoration will generate a much improved water quality from the mine and also alleviate the metal pollution of the river system.