Palveluarkkitehtuuri ja prosessien palvelulähtöinen mallintaminen

Liiketoiminnot käyttävät useita erillisiä tietojärjestelmiä. Toimintaprosessit sisältävät useiden eri liiketoimintojen suorittamia tehtäviä. Tehtävien tarvitsemien ja tuottamien tietojen sujuvan virtauksen toteutuminen vaatii tietojen ja tietojärjestelmien integraatiota, jota on toteutettu perinteisesti järjestelmien välisillä suorilla yhteyksillä. Tästä seuraa IT-arkkitehtuurin joustamattomuutta. Palvelulähtöisellä arkkitehtuurilla (Service Oriented Architecture, SOA) luvataan IT-arkkitehtuurille parempaa joustavuutta ja toisaalta kustannussäästöjä. Työssä selvitettiin palveluarkkitehtuurin teoreettinen tausta sekä palvelulähtöisen prosessikuvauskielen BPMN ideaa. Empiirisessä osuudessa haettiin teemahaastattelujen avulla kohdeyrityksen ja sen käyttämien järjestelmätoimittajien näkemyksiä palveluarkkitehtuurista ja siihen vaikuttavista tekijöistä. Lisäksi työssä selvitettiin palveluarkkitehtuurista saatavia vastauksia kohdeyrityksen IT-strategiassa esitettyihin tavoitteisiin. Työn tuloksena analysoitiin palvelupohjaista mallinnusmenetelmää noudattaen prosessi- ja palvelukuvaus sekä tunnistettiin niitä tukevat SOA-palvelut. Menetelmän lopputuloksia hyödyntäen työssä esitettiin implementointiratkaisu palveluväylän avulla toteutettuna. Lisäksi luonnosteltiin ehdotusta siitä, miten kohdeyritys voisi lähteä liikkeelle palveluarkkitehtuurin soveltamisessa.

Essays on Business and Leadership Ethics

As this is a dissertation, an academic thesis, it is important to define the objectives of my research, even if ex post facto, explicitly: - To define, develop and study the concept of business and leadership ethics. - To empirically study the phenomena associated with business and leadership from an ethical perspective. - To create a new framework for the development of responsible business. - To create an “acid test” for my body of works, i.e. a test and an evaluation on how well my research and ideas hold up under academic philosophical reflection. The utilitarian reasoning had the most support when the actors justified their actions regarding economic benefit. (=instrumental good). Duty and benefit were often mixed up in people’s speech. Their meaning contents were blurred and the argumentation lines created by the actors were broken. This can be interpreted in a way that supports Frankena’s mixed deontological philosophy as a frame of reference. Deontologica reasoning was used e.g. in describing the personnel management processes of a company. Virtue ethics is a favourable starting point for studying management and leadership ethics. All the actors studied could name virtues for their operations, towards which to aspire to. They also named professional practices already in use that they considered to be virtuous. Finally, I wish to state that normative ethics is an important branch of philosophical ethics, if also very important in applied ethics especially. From the normative standpoint, the results of this dissertation want to lead nations, communities and individuals towards the virtues of democratic leadership and sustainable economic development.

Value co-creation through virtual community participation

Consumers create a great deal of content in the Internet. As they do not get a monetary compensation for doing so, it seems apparent that other types of reward are derived from giving up one's time and other resources. The purpose of this study is to describe value creation and user participation in a virtual community. It can be broken down into three research questions. 1. What is the value creation logic of a virtual community? 2. What value is perceived by virtual community users? 3. What is the association between value perceived by virtual community users and their participation in a community? The study employs the discussion on value co-creation as well as perspectives on the notion of value for consumers to create a theoretical framework for value creation. To understand value creation in the context of virtual communities and to create a theoretical framework for user participation, existing literature and research on virtual communities is discussed. The empirical part of the study employs quantitative methodology to analyze data collected by sending a survey questionnaire to the users of a Finnish wellbeing-based virtual community. The results indicate that virtual community users perceive self-development, enjoyment, reputation-building and community commitment value when using the service and that value perceptions are associated with community participation. Moreover, it was found that different types of value are associated with different forms of participation. Based on the findings, it is suggested that the four types of value make up a considerable share of value for virtual community users. Moreover, as the results indicate that different value types are associated with different forms of participation, it suggested that virtual community organizers consider what forms of participation they want to promote and design their virtual communities to support creation of the different types of value accordingly.

Kuka luottaa ja mihin strategisessa kumppanuudessa? Case pankki ja kiinteistönvälitys

Tässä tutkielmassa tarkastellaan luottamuksen roolia kahden yrityksen välisessä yhteistyössä sekä sitä miten luottamus yhteistyössä rakentuu. Tavoitteena on selvittää mihin luottamus yhteistyössä kohdistuu ja mikä on henkilöityvän ja ei-henkilöityvän luottamuksen rooli. Tutkimuksen käytännöllinen tavoite on löytää keinoja, joilla yritysten johto voisi edesauttaa luottamuksen rakentumista. Lisäksi tarkastellaan sitä näyttääkö luottamuksella olevan vaikutusta yhteistyön toimivuuteen ja tuloksellisuuteen. Tämä laadullisen tutkimuksen teoreettinen osuus toteutettiin kirjallisuus-katsauksena. Empiirinen aineisto koostui haastatteluista, jotka toteutettiin molemmissa kohdeyrityksissä ja analysoitiin. Tutkimuksen tuloksena voidaan todeta, että luottamus on toimivan ja tu-loksellisen yhteistyön perusedellytys. Luottamus ilmenee sekä henkilöiden välisenä luottamuksena että ei-henkilöityvänä luottamuksena, jolloin se kohdistuu yritykseen, jonka kanssa yhteistyötä tehdään. Luottamus kohdistuu sekä toisen osapuolen kyvykkyyteen että hyväntahtoisuuteen. Tulosten perusteella ei pysty sanomaan onko henkilöityvällä luottamuksella tai ei-henkilöityvällä luottamuksella suurempi vaikutus yhteistyön toimivuuteen ja tuloksellisuuteen. Henkilöityvä luottamus ja ei-henkilöityvä luottamus eivät kuitenkaan kompensoi toisiaan. Tulosten perusteella näyttää siltä, että yhteistyö on tuloksellisinta kun osapuolet luottavat paitsi henkilöihin, joiden kanssa he yhteistyötä tekevät, myös kumppaniyrityksen brändiin, strategiaan sekä kaupalliseen kilpailukykyyn. Luottamusta rakentaa haastateltujen mukaan henkilösuhteiden lisäksi avoin ja selkeä tiedottaminen, ammattitaito, vuorovaikutus ja säännöllinen yhteydenpito, hyvät kokemukset ja saatu palaute, positiivinen asenne ja sitoutuminen, ongelmanratkaisukyky ja lupausten pitäminen. Yritysten johto voi rakentaa luottamusta mahdollistamalla ja vahvistamalla edellä mainittuja tekijöitä ja prosesseja.

Toimituskyvyn kehittäminen prosessin materiaalipuutteita hallitsemalla

Toimituskyky on yrityksen suorituskykyä kuvaava tekijä, jolla on merkittävä vaikutus asiakastyytyväisyyteen, erityisesti valmistusteollisuudessa. Toimituskyky muodostuu materiaalin saatavuudesta ja logistisen järjestelmän toimitusvarmuudesta, joten hyvä toimituskyky edellyttää materiaalipuutteiden hallintaa. Tämän diplomityön tavoitteena on esittää, miten toimituskykyä voidaan kehittää tilaus-toimitusprosessin materiaalipuutteita hallitsemalla. Tutkimus toteutettiin konstruktiivisella tutkimusotteella case-tutkimuksena havainnoimalla toimintaa case-yrityksessä sekä analysoimalla case-yrityksen kirjallista materiaalia ja arkistoja. Yrityksessä havaittuja materiaalipuutteisiin liittyviä ongelmia tarkasteltiin tilaus-toimitusprosessin näkökulmasta prosessijohtamisen ja systemaattisen ongelmanratkaisun teorioiden avulla. Tutkimuksen tuloksena laadittiin kolme käytännönläheistä ratkaisuehdotusta havaittuihin ongelmiin; (1) materiaalipuutteiden syy-seuraussuhteita kuvaavat ongelma-syy-seurausketjut, (2) materiaalipuutteiden ongelmanratkaisumalli systemaattisen ongelmanratkaisun tueksi sekä (3) visuaalinen tilaus-toimitusprosessimalli, joka painottaa osaprosessien yhteyttä koko prosessin toimituskykyyn ja toimitusvarmuuteen. Tulosten mukaan materiaalipuutteet tulisi käsittää prosessin laatuvirheinä, jotka antavat arvokasta tietoa siitä, että prosessissa on laatuongelmia. Tulosten perusteella yrityksen toimituskykyä voidaan kehittää havainnoimalla tilaus-toimitusprosessin laatuvirheitä, selvittämällä laatuvirheiden syy-seuraussuhteet systemaattisesti ongelmanratkaisumallia hyödyntäen sekä toimimalla prosessiajattelun mukaisesti tilaus-toimitusprosessin toimituskyvyn jatkuvaa parantamista tavoitellen. Tutkimusongelman tarkastelutapaa ja työn tuloksia voidaan soveltaa samankaltaisiin tapauksiin, joissa tilaus-toimitusprosessin laatuvirheet, esimerkiksi materiaalipuutteet, paljastavat kehittämistä vaativia epäkohtia prosessin toimintatavoissa. Tilaus-toimitusprosessin toimituskykyä voidaan kehittää vain, jos panostetaan ajan hallintaan ja kykyyn toimia asiakaslupausten ja sopimusten mukaisesti.

Ensuring the efficient utilization of Business Intelligence

In recent years, chief information officers (CIOs) around the world have identified Business Intelligence (BI) as their top priority and as the best way to enhance their enterprises competitiveness. Yet, many enterprises are struggling to realize the business value that BI promises. This discrepancy causes important questions, for example: what are the critical success factors of Business Intelligence and, more importantly, how it can be ensured that a Business Intelligence program enhances enterprises competitiveness. The main objective of the study is to find out how it can be ensured that a BI program meets its goals in providing competitive advantage to an enterprise. The objective is approached with a literature review and a qualitative case study. For the literature review the main objective populates three research questions (RQs); RQ1: What is Business Intelligence and why is it important for modern enterprises? RQ2: What are the critical success factors of Business Intelligence programs? RQ3: How it can be ensured that CSFs are met? The qualitative case study covers the BI program of a Finnish global manufacturer company. The research questions for the case study are as follows; RQ4: What is the current state of the case company’s BI program and what are the key areas for improvement? RQ5: In what ways the case company’s Business Intelligence program could be improved? The case company’s BI program is researched using the following methods; action research, semi-structured interviews, maturity assessment and benchmarking. The literature review shows that Business Intelligence is a technology-based information process that contains a series of systematic activities, which are driven by the specific information needs of decision-makers. The objective of BI is to provide accurate, timely, fact-based information, which enables taking actions that lead to achieving competitive advantage. There are many reasons for the importance of Business Intelligence, two of the most important being; 1) It helps to bridge the gap between an enterprise’s current and its desired performance, and 2) It helps enterprises to be in alignment with key performance indicators meaning it helps an enterprise to align towards its key objectives. The literature review also shows that there are known critical success factors (CSFs) for Business Intelligence programs which have to be met if the above mentioned value is wanted to be achieved, for example; committed management support and sponsorship, business-driven development approach and sustainable data quality. The literature review shows that the most common challenges are related to these CSFs and, more importantly, that overcoming these challenges requires a more comprehensive form of BI, called Enterprise Performance Management (EPM). EPM links measurement to strategy by focusing on what is measured and why. The case study shows that many of the challenges faced in the case company’s BI program are related to the above-mentioned CSFs. The main challenges are; lack of support and sponsorship from business, lack of visibility to overall business performance, lack of rigid BI development process, lack of clear purpose for the BI program and poor data quality. To overcome these challenges the case company should define and design an enterprise metrics framework, make sure that BI development requirements are gathered and prioritized by business, focus on data quality and ownership, and finally define clear goals for the BI program and then support and sponsor these goals.

Migrating legacy applications to cloud: case TOAS

Cloud computing, despite its success and promises, presents issues for businesses mi­grating their legacy applications to cloud. In this research legacy-to-cloud migration issues are reviewed based on literature findings and an experience report. Solutions are applied to Tieto Open Application Suite (TOAS) software development platform running on cloud infrastructure. It is observed that the migration strategy heavily affects the migration approach. For TOAS a strategy of redesigning the applications for cloud is suggested. Common migration-driven application level modifications in­clude adaptation to service-oriented architecture, load balancing, and runtime and technology changes. A cloud platform such as TOAS might introduce additional needs. Decision making on migration strategy is found to be an issue to be solved case by case. Use of assistive decision making tools is suggested.

Some biological aspects of the weed Lesser celandine (Ranunculus ficaria)

Lesser celandine (Ranunculaceae) is a perennial weed with tuberous root. Tubers are the most important means of reproduction and dispersion of this weed. In recent years, it has spread into wheat fields in Western Iran, mainly in the Lorestan province. A series of experiments were conducted to determine cardinal temperatures and to study the effects of pre-chilling, temperature fluctuations, tuber size, freezing and drying on germination of the tubers, as well as the effect of planting depth on sprouting of the tubers. The results obtained showed that the highest percentage of germination occurred when tubers were stored for more than 2 weeks at 4 or 8 ºC. The optimum temperature for germination differed in large and small tubers (8 and 14oC, respectively). Germination was the highest (almost 100%) at temperature fluctuations of 5-10oC. Germination of the finger-like and small tubers was the highest (95%); however, very small, small, and broken tubers showed the lowest germination percentage. In the freezing experiment, decreasing the temperature and increasing the storage duration decreased the germination of tubers. Increasing the osmotic potential and temperature resulted in decreased tuber germination of Lesser celandine. Lesser celandine could sprout down to 20 cm depth but heat demand for tubers from superficial depth was smaller than for tubers planted at greater depth.

A DNS Bases Approach To Electronic Persistance, or "If Your Pants Fit, Why Use Suspenders?"

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Effect of abscisic acid on the mobilisation of galactomannan and embryo development of Sesbania virgata (Cav.) Pers. (Leguminosae - Faboideae)

Galactomannans (GM) are storage cell wall polysaccharides present in endospermic seeds of legumes. They are thought to be storage polymers, since it has been observed for a few species (among them Sesbania virgata) that they are completely broken down after germination and their products are transferred to the growing embryo. We examined the effect of 10-4 M abscisic acid (ABA) on the degradation of galactomannan in isolated endosperms and intact seeds of S. virgata. We found that after seed germination the initial embryo growth was retarded. Ultrastructural analysis showed that the embryo is completely surrounded by an endosperm which displays very thick galactomannan-containing cell walls. Although an inhibitory effect has been observed on the increase of fresh mass of the embryo, the effect of ABA on the dry mass was weaker and transitory (from 48 to 96 h). Endosperm dry mass and galactomannan degradation were significantly inhibited and the activity of alpha-galactosidase was strongly affected. The addition of ABA before and/or after the start of mobilisation in intact seeds or isolated endosperms, showed that whereas addition before mobilisation did not affect dry mass decrease in intact seeds, it was strongly affected in isolated endosperms. On the other hand, whereas it affected embryo fresh mass increase in intact seeds, but not in isolated embryos, no significant effect was observed on dry mass. These results suggest that ABA affects galactomannan degradation and by doing so, prevents water absorption by the embryo, rather than affect its dry mass. As ABA has been detected in the endosperm of seeds of S. virgata, it is proposed that it probably acts as a modulator of galactomannan mobilisation and consequently synchronises it with early growth of the embryo.

Rikottujen ikkunoiden nollatoleranssi. Tutkimus New Yorkin rikoksentorjunnan uuskonservatiivi-mallista Suomessa

Väitöskirja on kriminologista kontrollin ja rikoksentorjunnan tutkimusta sekä poliisitutkimusta. Kohteena on ympäri maailmaa levinnyt nollatoleranssiksi kutsuttu järjestyspoliisistrategia. Strategiaa kokeiltiin vuosituhannen vaihteessa vuoden kestäneessä järjestyksenvalvonnan hankkeessa Tampereella. Vaikka kyseessä oli kokeilu, niin tutkimuksessa osoitetaan toimintatavan olleen ja olevan pitkälti kiinteä osa perinteistä suomalaisen järjestyspoliisin toimintaperiaatetta. Artikkeliväitöskirja sisältää viisi vuosina 1998–2005 julkaistua kirjoitusta. Kokoavan yhteenvetoartikkelin tutkimusongelmat ovat seuraavat: Millaisia ovat Yhdysvaltojen ja Suomen järjestyspoliisitoiminnan nollatoleranssien mekanismien, kontekstien ja vaikutusten keskeiset erot ja yhtäläisyydet? Millainen on Tampereen nollatoleranssikokeilu ja New Yorkin rikottujen ikkunoiden nollatoleranssi rikoksentorjunnan arvioinnin ja moraalisäätelyn esimerkkeinä? Tampereen kokeilun prosessi- ja vaikuttavuusarviointitutkimus koostaa tutkimuksen empiirisen aineiston. Hankkeen alku- ja loppumittauksena toimi lomakekysely tamperelaisille (2 x n2000). Lisäksi analyysissä käytettiin kansalaiskyselyn uhrikyselyä, poliisin rikos- ja päivystyskeskustilastoja, Tilastokeskuksen tilastoja, hankkeen suoritelomakkeita sekä rangaistusvaatimus- ja rikesakkolomakkeita sekä kouluterveystutkimuksia. Tampereen poliiseille tehtiin lomakekysely ja teemahaastatteluja. Sosiaali-, nuoriso- ja vapaaehtoistyöntekijöitä sekä yli viisikymmentä tamperelaista nuorta sekä kymmenkunta tamperelaista aikuista haastateltiin. Yhdysvaltojen osalta nojaudutaan verrattain suureen määrään julkaistua korkeatasoista ja ajankohtaista kriminologista tutkimusta. New Yorkiin ja Yhdysvaltoihin sovelletussa hallintavalta- ja moraalisäätelyanalyysissa rikotut ikkunat -teoria osoittautuu uuskonservatiiviseksi moraaliprojektiksi, joka opastaa kaupunkeja hankkimaan itselleen oikeuden tiukkaan järjestyksenvalvontaan. Aiemmin sen oli estänyt kansalaisoikeusmyönteinen lakien tulkinta. New Yorkissa ja Tampereella syntyi useita kielteisiä sivu- ja vastavaikutuksia, kuten ongelmien siirtymistä (displacement). Tämä on yksi keskeinen tulos tilannetorjunnan ja kontrollin tehostamisen ja kohdistamisen hankkeissa. Tulokset haastavat arvioimaan kriittisesti, ovatko kaikki lapsiin ja nuoriin kohdistuvat varhaisen puuttumisen hankkeet seuraustensa perusteella oikeutettuja.

Consumer online communication of corporate social responsibility in the sin industry context: Cases in the global online gambling industry.

So-called sin industries are often related to harmfulness, unethical business, and unproductiveness. Nowadays, the alcohol, gambling, and tobacco industries are most often considered to be part of sin industries, which is also the context of this study. However, the definition of a sin industry is always related to time and culture. Despite the controversies of sin industries, there are studies that have shown that corporate social responsibility (CSR) engagement is even more important for sin industries than for normal industries and that CSR has a positive effect on firm value in sin industries. With CSR this study refers to an ideology where company takes mostly voluntary actions towards various groups of stakeholders and the environment. In other words, the company goes beyond the legal norms and regulations. In particular, the purpose of this thesis is to find out how companies, operating in the online gambling industry, communicate about their CSR actions to consumers at their web pages. The online environment is essential for this study as online gambling environment is a source of many controversies in comparison to the traditional gambling halls and casinos. These include, for example, greater accessibility, anonymity, and availability of the service. This study uses qualitative textual analysis as its approach, more precisely the discourse analysis. In addition, as this study focuses on large international companies and their actions, also case study approach will be presented. The cases studied are Mybet, Unibet, and Bwin.Party. In order to study the subject, elements from discourse analysis are combined with insights of essential CSR theories, and the specific characteristics of the online gambling industry. As a background for the framework, this study uses the framework of Du & Vieira (2012). After analyzing the discourses of CSR communication and CSR practices, it seems that all of the case companies still do not use all the potential that the online environment provides in terms of CSR or stakeholder communication. There are large differences between different communication tools used at different web pages (gambling pages vs. corporation pages) and between the firms’ CSR profiles. Moreover, there are large differences in the CSR practices used in the web pages of the case companies. The findings of this study are partially alarming as the case companies represent the largest companies in the industry. There are major varieties between the companies’ CSR communication and clear shortcomings in some parts of the online communication. Moreover, the trust of the consumer was broken in some places. If this is the standard that the biggest players in the industry have set with regards to CSR communication, it is probable that the smaller players are performing even worse. Moreover, the regulators are most likely concentrating on the larger companies, so the smaller companies might have fewer incentives and pressure to perform according to the regulations or exceeding the legislation. The conclusions of this thesis provide insights to managers, regulators, and scholars. Suggestions for future studies are provided as well.

Readout architectures for hybrid pixel detector readout chips

The original contribution of this thesis to knowledge are novel digital readout architectures for hybrid pixel readout chips. The thesis presents asynchronous bus-based architecture, a data-node based column architecture and a network-based pixel matrix architecture for data transportation. It is shown that the data-node architecture achieves readout efficiency 99% with half the output rate as a bus-based system. The network-based solution avoids “broken” columns due to some manufacturing errors, and it distributes internal data traffic more evenly across the pixel matrix than column-based architectures. An improvement of > 10% to the efficiency is achieved with uniform and non-uniform hit occupancies. Architectural design has been done using transaction level modeling (TLM) and sequential high-level design techniques for reducing the design and simulation time. It has been possible to simulate tens of column and full chip architectures using the high-level techniques. A decrease of > 10 in run-time is observed using these techniques compared to register transfer level (RTL) design technique. Reduction of 50% for lines-of-code (LoC) for the high-level models compared to the RTL description has been achieved. Two architectures are then demonstrated in two hybrid pixel readout chips. The first chip, Timepix3 has been designed for the Medipix3 collaboration. According to the measurements, it consumes < 1 W/cm^2. It also delivers up to 40 Mhits/s/cm^2 with 10-bit time-over-threshold (ToT) and 18-bit time-of-arrival (ToA) of 1.5625 ns. The chip uses a token-arbitrated, asynchronous two-phase handshake column bus for internal data transfer. It has also been successfully used in a multi-chip particle tracking telescope. The second chip, VeloPix, is a readout chip being designed for the upgrade of Vertex Locator (VELO) of the LHCb experiment at CERN. Based on the simulations, it consumes < 1.5 W/cm^2 while delivering up to 320 Mpackets/s/cm^2, each packet containing up to 8 pixels. VeloPix uses a node-based data fabric for achieving throughput of 13.3 Mpackets/s from the column to the EoC. By combining Monte Carlo physics data with high-level simulations, it has been demonstrated that the architecture meets requirements of the VELO (260 Mpackets/s/cm^2 with efficiency of 99%).

Analyzing and Computing the Sustainability Gains of Building Automation

Smart home implementation in residential buildings promises to optimize energy usage and save significant amount of energy simply due to a better understanding of user's energy usage profile. Apart from the energy optimisation prospects of this technology, it also aims to guarantee occupants significant amount of comfort and remote control over home appliances both at home locations and at remote places. However, smart home investment just like any other kind of investment requires an adequate measurement and justification of the economic gains it could proffer before its realization. These economic gains could differ for different occupants due to their inherent behaviours and tendencies. Thus it is pertinent to investigate the various behaviours and tendencies of occupants in different domain of interests and to measure the value of the energy savings accrued by smart home implementations in these domains of interest in order to justify such economic gains. This thesis investigates two domains of interests (the rented apartment and owned apartment) for primarily two behavioural tendencies (Finland and Germany) obtained from observation and corroborated by conducted interviews to measure the payback time and Return on Investment (ROI) of their smart home implementations. Also, similar measures are obtained for identified Australian use case. The research finding reveals that building automation for the Finnish behavioural tendencies seems to proffers a better ROI and payback time for smart home implementations.

Characterization of pre-gelatinized rice and bean flour

The objective of this study was to develop a pre-gelatinized flour using a mixture of broken rice and split beans by thermoplastic extrusion, and to evaluate the physicochemical, nutritional, and technological quality of the final product. The extrusion parameters were maintained using three heating zones with temperatures of 30 ºC, 40 ºC, and 70 ºC; screw speed of 177 rpm; feed rate of 257 g/m, and circular matrix of 3.85 mm. The following characterization analyses were performed: physicochemical, nutritional, water absorption index (WAI), water solubility index (WSI), and paste viscosity. The pre-gelatinized rice and bean flour had an intermediate value of WAI, 7.51 g/g, and high WSI value, 24.61%. Regarding proteins, it was verified an average content of 12.9% in the final product. The amino acid contents found in the pre-gelatinized flour indicate that the mixture has the essential amino acids. It was also found that the pre-gelatinized flour supplies more than 60% of the essential amino acids recommended for children aged one to three years old. The gelatinized flour composed of broken rice and split beans is an alternative to the use of these by-products of the manufacture process of rice and beans to obtain a product with viable technological characteristics and high nutritional value.