Comparison of the nanoparticles performance in the photocatalytic degradation of a styrene-butadiene rubber nanocomposite

Much has been talking about the advantages of polymeric nanocomposites, but little is known about the influence of nanoparticles on the stability of these materials. In this sense, we studied the influence of both oxides of zirconium and titanium, known to have photocatalytic properties, as well as the influence of synthetic clay Laponite on the photodegradation of styrene-butadiene rubber (SBR). SBR nanocomposites were prepared by the colloidal route by mixing commercial polymer lattices and nanometric anatase TiO2, monoclinic ZrO2 or exfoliated Laponite clays colloidal suspensions. To better understand the degradation mechanisms that occur in these nanocomposites, the efficiency of different photocatalysts under ultraviolet radiation was monitored by FT-IR and UV-vis spectroscopies and by differential scanning calorimetric. It was observed that TiO2 and ZrO2 nanoparticles undoubtedly acted as catalysts during the photodegradation process with different efficiencies and rates. However, when compared to pure SBR samples, the polymer degradation mechanism was unaffected. Unlike studies with nanocomposites montmorillonite, exfoliated laponite clay effectively acts as a photostabilizer of polymer UV photodegradation. Copyright © 2012 Wiley Periodicals, Inc.

Evaluation of mechanical and thermal properties after chemical degradation of PVC and HDPE geomembranes

Chemical compatibility between geomembranes and site-specific waste liquids should be assessed since the waste liquids are highly complex mixtures. This paper presents some considerations about the chemical compatibility of geomembranes and some results of mechanical tests in HDPE and PVC geomembranes that were exposed to leachate and chemical residue (niobium). PVC and HDPE geomembranes of two thicknesses were tested: 1.0, 2.0 mm (PVC) and 0.8, 2.5 mm (HDPE). The results obtained show that after exposure the PVC geomembranes (1.0, 2.0 mm) were more rigid and stiffer than fresh samples. The HDPE geomembranes, on the other hand, when exposed to leachate and niobium residue presented increases in deformation. Melt flow index (MFI) tests were also carried out to verify the oxidation. © 2013 ejge.

Degradation of dipyrone via advanced oxidation processes using a cerium nanostructured electrocatalyst material

This work studied the degradation of dipyrone, via electrochemical processes and via electro-Fenton reaction using a 4% CeO2/C gas diffusion electrode (GDE) prepared via modified polymeric precursor method. This material was used to electrochemically generate H2O2 through oxygen reduction. The mean crystallite sizes estimated by the Scherrer equation for 4% CeO2/C were 4 nm for CeO2-x (0 4 4) and 5 nm for CeO2 (1 1 1) while using transmission electron microscopy (TEM) the mean nanoparticle size was 5.4 nm. X-ray photoelectron spectroscopy (XPS) measurements revealed nearly equal concentrations of Ce(III) and Ce(IV) species on carbon, which contained high oxygenated acid species like CO and OCO. Electrochemical degradation using Vulcan XC 72R carbon showed that the dipyrone was not removed during the two hour electrolysis in all applied potentials by electro-degradation. Besides, when the Fenton process was employed the degradation was much similar when using cerium catalysts but the mineralization reaches just to 50% at -1.1 V. However, using the CeO2/C GDE, in 20 min all of the dipyrone was degraded with 26% mineralization at -1.3 V and when the Fenton process was employed, all of the dipyrone was removed after 5 min with 57% mineralization at -1.1 V. Relative to Vulcan XC72R, ceria acts as an oxygen buffer leading to an increase in the local oxygen concentration, facilitating H2O2 formation and consequently improving the dipyrone degradation © 2013 Elsevier B.V. All rights reserved.

Design, synthesis and biological evaluation of new aryl thiosemicarbazone as antichagasic candidates

The present work reports on the synthesis, biological assaying and docking studies of a series of 12 aryl thiosemicarbazones, which were planned to act over two main enzymes, cruzain and trypanothione reductase. These enzymes are used as targets of trypanocidal activity in Chagas disease control with a minimal mutagenic profile. Three p-nitroaromatic thiosemicarbazones showed high activity against Trypanosoma cruzi in in vitro assays (IC50 < 57 μM), and no mutagenic profile was observed in micronucleous tests. Although the in vitro inhibition test showed that 10-μM doses of eight compounds inhibited cruzain activity, no correlation was found between cruzain inhibition and trypanocidal activity. © 2013 Elsevier Masson SAS. All rights reserved.

Low tungsten content of nanostructured material supported on carbon for the degradation of phenol

A comparative study using different mass proportions of WO3/C (1%, 5%, 10% and 15%) for H2O2 electrogeneration and subsequent phenol degradation was performed. To include the influence of the carbon substrate and the preparation methods, all synthesis parameters were evaluated. The WO3/C materials were prepared by a modified polymeric precursor method (PPM) and the sol-gel method (SGM) on Vulcan XC 72R and Printex L6 carbon supports, verifying the most efficient metal/carbon proportion. The materials were physically characterized by X-ray diffraction (XRD) and by X-ray photoelectron spectroscopy (XPS) techniques. The XRD and the XPS techniques identified just one phase containing WO3 and elevated oxygen concentration on carbon with the presence of WO3. The oxygen reduction reaction (ORR), studied by the rotating ring-disk electrode technique, showed that WO3/C material with the lowest tungsten content (1% WO3/C), supported on Vulcan XC 72R and prepared by SGM, was the most promising electrocatalyst for H2O2 electrogeneration. This material was then analyzed using a gas diffusion electrode (GDE) and 585mgL-1 of H2O2 was produced in acid media. This GDE was employed as a working electrode in an electrochemical cell to promote phenol degradation by an advanced oxidative process. The most efficient method applied was the photo-electro-Fenton; this method allowed for 65% degradation and 11% mineralization of phenol during a 2-h period. Following 12h of exhaustive electrolysis using the photo-electro-Fenton method, the total degradation of phenol was observed after 4h and the mineralization of phenol approached 75% after 12h. © 2013 Elsevier B.V.

The application of a surface response methodology in the solar/UV-induced degradation of dairy wastewater using immobilized ZnO as a semiconductor

An Advanced Oxidation Process (AOPs) was carried out in this study with the use of immobilized ZnO and solar/UV as an energy source to degrade dairy wastewater. The semibatch reactor system consisted of metal plate of 800 × 250 mm and a glass tank. The reaction time was of 3 h for 3 L of dairy wastewater. Experiments were performed based on a surface response methodology in order to optimize the photocatalytic process. Degradation was measured in percentage terms by total organic carbon (TOC). The entry variables were ZnO coating thickness and pH, using three levels of each variable. The optimized results showed a TOC degradation of 31.7%. Optimal parameters were metal-plate coating of 100 m of ZnO and pH of 8.0. Since solar/UV is a constant and free energy source in most tropical countries, this process tends to suggest an interesting contribution in dairy wastewater treatment, especially as a pretreatment and the optimal conditions to guarantee a better efficiency of the process. © 2013 Gisella R. Lamas Samanamud et al.

Antioxidant capacity and biological activity of essential oil and methanol extract of Conobea scoparioides (Cham. & Schltdl.) Benth

Os óleos essenciais da planta sub-aquática Conobea scoparioides (fresca e previamente seca) apresentaram rendimentos de 3,4 e 3,3%, respectivamente. Os principais constituintes identificados foram o éter metílico do timol (39,6 e 47,7%), timol (40,0 e 26,4%), α-felandreno (12,1 e 14,3%) e p-cimeno (1,5 e 1,7%), totalizando mais de 90% nos referidos óleos. A concentração de seqüestro do radical DPPH (CE50) dos óleos e extrato foi de 46,7 ± 3,6 µg mL^-1 para a planta fresca (CsO-f), de 56,1 ± 2,4 µg mL^-1 para a planta seca (CsO-d), e de 23,0 ± 2,2 µg mL^-1 para o extrato metanólico (CsE-d). O valor do extrato é comparável ao BHT (19,8 ± 0,5 µg mL^-1), usado como padrão antioxidante. O valor médio dos óleos é duas vezes menor, mas igualmente importante como agente antioxidante. O teor de Fenólicos Totais (TP, 124,6 ± 8,7 mg GAE per g) e o Trolox Equivalente (TEAC, 144,1 ± 4,9 mg TE per g) do extrato metanólico confirmaram a significativa atividade antioxidante de C. scoparioides. Da mesma forma, nos bioensaios com larva de camarão (Artemia salina) o valor médio da concentração letal dos óleos (CL₅₀, 7,7 ± 0,3 µg mL^-1) foi dez vezes maior que no extrato metanólico (CL₅₀, 77,6 ± 7,1 µg mL^-1) mostrando importante atividade biológica.

Antioxidant capacity and biological activity of essential oil and methanol extract of Hyptis crenata Pohl ex Benth

O óleo essencial das folhas e ramos finos frescos e secos de Hyptis crenata forneceu os seguintes rendimentos, 1,4% e 0,9%. Os constituintes voláteis principais foram α-pineno (22,0%; 19,5%), 1,8-cineol (17,6%; 23,2%), β-pineno (17,0%: 13,8%), cânfora (4,7%; 11,6%), limoneno (5,4%; 4,4%) e γ-terpineno (3,5%; 2,4%), totalizando mais de 70% nos óleos. A atividade de seqüestro do radical DPPH para o extrato metanólico (CE₅₀, 16,7 + 0,4 µg/mL) foi comparável ao do BHT (19,8 ± 0,5 µg/mL) mostrando uma significante atividade antioxidante. Os óleos apresentaram baixa atividade. O teor de fenólicos totais (TP, 373,0 + 15,9 mg GAE/g) e equivalente trolox (TEAC, 226,8 + 0,5 mg TE/g) confirmaram a atividade antioxidante do extrato metanólico, que pode ser atribuída à presença de compostos fenólicos polares. No teste com larvas de camarão as concentrações letais para o óleo e extrato metanólico foram 6,7 + 0,2 µg/mL e 13,0 + 3,7 µg/mL, respectivamente, fornecendo importante evidência de suas atividade biológicas.

Predicting biological parameters of estuarine benthic communities using models based on environmental data

Este trabalho objetivou predizer parâmetros da estrutura de associações macrobentônicas (composição específica, abundância, riqueza, diversidade e equitatividade) em estuários do Sul do Brasil, utilizando modelos baseados em dados ambientais (características dos sedimentos, salinidade, temperaturas do ar e da água, e profundidade). As amostragens foram realizadas sazonalmente em cinco estuários entre o inverno de 1996 e o verão de 1998. Em cada estuário as amostras foram coletadas em áreas não poluídas, com características semelhantes quanto a presença ou ausência de vegetação, profundidade e distância da desenbocadura. Para a obtenção dos modelos de predição, foram utilizados dois métodos: o primeiro baseado em Análise Discriminante Múltipla (ADM) e o segundo em Regressão Linear Múltipla (RLM). Os modelos baseados em ADM apresentaram resultados melhores do que os baseados em regressão linear. Os melhores resultados usando RLM foram obtidos para diversidade e riqueza. É possível então, concluir que modelos como aqui derivados podem representar ferramentas muito úteis em estudos de monitoramento ambiental em estuários.

Evidence for biological inheritance of the eosinophil response to internal parasites in southeastern Brazil

Uma amostra de 177 indivíduos pertencentes a 120 famílias nucleares, completas ou incompletas, de Bambui, Estado de Minas Gerais, sudeste do Brasil, foi estudada com o objetivo de apurar algumas das causas da variabilidade da taxa de eosinófilos em pessoas parasitadas por vermes intestinais com ciclo de vida extra-digestivo. A análise de segregação, aplicada aos dados sem correção para a assimetria, mostrou que a hipótese de um gene principal aditivo é consistente com os dados, enquanto que as hipóteses que supõem a ação de um gene dominante, de um gene recessivo ou ainda herança multifatorial não explicam, adequadamente, a significante agregação familial observada. A correção mais parcimoniosa para assimetria mostrou resultados semelhantes, mas não permitiu a distinção entre os modelos dominante e recessivo, embora permitisse a rejeição do modelo codominante. Considerando que esse modelo supõe ser a assimetria devida ao entrelaçamento de duas distribuições, esses resultados parecem concordar com aqueles obtidos quando os dados não foram corrigidos. Pode-se sugerir que o papel desempenhado por vários fatores genéticos independentes na resistência/suscetibilidade à infestação por helmintos seja determinado, principalmente, por suas capacidades de agir no estabelecimento de uma resposta eosinofílica.

Chemical and biological properties of phosphorus-fertilized soil under legume and grass cover (Cerrado region, Brazil)

The use of cover crops has been suggested as an effective method to maintain and/or increase the organic matter content, while maintaining and/or enhancing the soil physical, chemical and biological properties. The fertility of Cerrado soils is low and, consequently, phosphorus levels as well. Phosphorus is required at every metabolic stage of the plant, as it plays a role in the processes of protein and energy synthesis and influences the photosynthetic process. This study evaluated the influence of cover crops and phosphorus rates on soil chemical and biological properties after two consecutive years of common bean. The study analyzed an Oxisol in Selvíria (Mato Grosso do Sul, Brazil), in a randomized block, split plot design, in a total of 24 treatments with three replications. The plot treatments consisted of cover crops (millet, pigeon pea, crotalaria, velvet bean, millet + pigeon pea, millet + crotalaria, and millet + velvet bean) and one plot was left fallow. The subplots were represented by phosphorus rates applied as monoammonium phosphate (0, 60 and 90 kg ha-1 P2O5). In August 2011, the soil chemical properties were evaluated (pH, organic matter, phosphorus, potential acidity, cation exchange capacity, and base saturation) as well as biological variables (carbon of released CO2, microbial carbon, metabolic quotient and microbial quotient). After two years of cover crops in rotation with common bean, the cover crop biomass had not altered the soil chemical properties and barely influenced the microbial activity. The biomass production of millet and crotalaria (monoculture or intercropped) was highest. The biological variables were sensitive and responded to increasing phosphorus rates with increases in microbial carbon and reduction of the metabolic quotient.

Biological aspects of Harmonia axyridis in comparison with Cycloneda sanguinea and Hippodamia convergens

The objective of this work was to evaluate the development, survival, reproductive capacity, and longevity of the Asian ladybug Harmonia axyridis in comparison with Cycloneda sanguinea and Hippodamia convergens. Coccinellid larvae and adults were fed daily with Schizaphis graminum. Ten couples of each species were isolated for evaluation of the adult phase. The duration of the larval stage of H. axyridis is the longest (10.2 days) and its adults are the heaviest (29.7 mg) compared with C. sanguinea and H. convergens. The three species showed similar percentages of survival during the developmental stages. An average of 82% of C. sanguinea, H. axyridis, and H. convergens larvae reached adulthood, which indicates that temperature (25°C) and the offered prey are favorable to coccinellid development. Harmonia axyridis produces a higher total number of eggs per female (1,029.2) than the other evaluated species. However, H. axyridis, which lives for an average of 147.2 days, does not show a significantly greater longevity than C. sanguinea (87.2 days) and H. convergens (134.3 days).

Biological aspects of Aphis gossypii Glöver, 1877 (Hemiptera: Aphididae) on colored lint cotton cultivars

This paper outlines the results of a study into the biological aspects of Aphis gossypii Glöver on colored cotton cultivars through the construction of life tables. In addition, we evaluate the influence of density of gossypol glands and trichomes of leaves on the biology of the aphid. Tests were conducted in a climate chamber at 25 ± 2°C, with relative humidity (RH) at 70 ± 10%, and a photophase of 12 hours, using the cultivars BRS Rubi, BRS Safira, and BRS Verde. Newly hatched nymphs were individually isolated in petri dishes containing leaf discs of cotton cultivars on a layer of water-agar (1%) of approximately 5 mm thick. An evaluation of the trichomes and gossypol gland densities of the cotton leaf plants was performed under a stereomicroscope, delimited to an area of 1 cm², and a count and identification of those on the surface was made. The feed substrates that were evaluated influenced the nymphal stage of A. gossypii. BRS Verde provided the shortest duration and BRS Safira was the longest during this phase. The cultivar BRS Verde, with the lowest density of trichomes, provided a large number of nymphs and led to a higher net reproductive rate (R0). Given these results, conclusions can be drawn that the colored cotton cultivars influence the duration of nymphal and adult stages of A. gossypii. The cultivar with a high density of trichomes on leaves (BRS Safira) adversely affects the fertility parameters of A. gossypii.

Effectiveness and biological compatibility of different generations of dentin adhesives

Besides possessing good mechanical properties, dental materials should present a good biological behavior and should not injure the involved tissues. Bond strength and biocompatibility are both highly significant properties of dentin adhesives. For that matter, these properties of four generations of adhesive systems (Multi-Purpose/Single Bond/SE Plus/Easy Bond) were evaluated.Eighty bovine teeth had their dentin exposed (500- and 200-mu m thickness). Adhesive was applied on the dentin layer of each specimen. Following that, the microshearing test was performed for all samples. A dentin barrier test was used for the cytotoxicity evaluation. Cell cultures (SV3NeoB) were collected from testing materials by means of 200- or 500-mu m-thick dentin slices and placed in a cell culture perfusion chamber. Cell viability was measured 24 h post-exposition by means of a photometrical test (MTT test).The best bonding performance was shown by the single-step adhesive Easy Bond (21 MPa, 200 mu m; 27 MPa, 500 mu m) followed by Single Bond (15.6 MPa, 200 mu m; 23.4 MPa, 500 mu m), SE Plus (18.2 MPa, 200 mu m; 20 MPa, 500 mu m), and Multi-Purpose (15.2 MPa, 200 mu m; 17.9 MPa, 500 mu m). Regarding the cytotoxicity, Multi-Purpose slightly reduced the cell viability to 92 % (200 mu m)/93 % (500 mu m). Single Bond was reasonably cytotoxic, reducing cell viability to 71 % (200 mu m)/64 % (500 mu m). The self-etching adhesive Scotchbond SE decreased cell viability to 85 % (200 mu m)/71 % (500 mu m). Conversely, Easy Bond did not reduce cell viability in this test, regardless of the dentin thickness.Results showed that the one-step system had the best bond strength performance and was the least toxic to pulp cells. In multiple-step systems, a correct bonding technique must be done, and a pulp capping strategy is necessary for achieving good performance in both properties.The study showed a promising system (one-step self-etching), referring to it as a good alternative for specific cases, mainly due to its technical simplicity and good biological responses.