Understanding volcanic processes using UV camera measurements of sulfur dioxide and coincident infrasound and seismicity

The exsolution of volatiles from magma maintains an important control on volcanic eruption styles. The nucleation, growth, and connectivity of bubbles during magma ascent provide the driving force behind eruptions, and the rate, volume, and ease of gas exsolution can affect eruptive activity. Volcanic plumes are the observable consequence of this magmatic degassing, and remote sensing techniques allow us to quantify changes in gas exsolution. However, until recently the methods used to measure volcanic plumes did not have the capability of detecting rapid changes in degassing on the scale of standard geophysical observations. The advent of the UV camera now makes high sample rate gas measurements possible. This type of dataset can then be compared to other volcanic observations to provide an in depth picture of degassing mechanisms in the shallow conduit. The goals of this research are to develop a robust methodology for UV camera field measurements of volcanic plumes, and utilize this data in conjunction with seismoacoustic records to illuminate degassing processes. Field and laboratory experiments were conducted to determine the effects of imaging conditions, vignetting, exposure time, calibration technique, and filter usage on the UV camera sulfur dioxide measurements. Using the best practices determined from these studies, a field campaign was undertaken at Volcán de Pacaya, Guatemala. Coincident plume sulfur dioxide measurements, acoustic recordings, and seismic observations were collected and analyzed jointly. The results provide insight into the small explosive features, variations in degassing rate, and plumbing system of this complex volcanic system. This research provides useful information for determining volcanic hazard at Pacaya, and demonstrates the potential of the UV camera in multiparameter studies.

An Active Learning Module for an Introduction to Software Engineering Course

Many schools do not begin to introduce college students to software engineering until they have had at least one semester of programming. Since software engineering is a large, complex, and abstract subject it is difficult to construct active learning exercises that build on the students’ elementary knowledge of programming and still teach basic software engineering principles. It is also the case that beginning students typically know how to construct small programs, but they have little experience with the techniques necessary to produce reliable and long-term maintainable modules. I have addressed these two concerns by defining a local standard (Montana Tech Method (MTM) Software Development Standard for Small Modules Template) that step-by-step directs students toward the construction of highly reliable small modules using well known, best-practices software engineering techniques. “Small module” is here defined as a coherent development task that can be unit tested, and can be car ried out by a single (or a pair of) software engineer(s) in at most a few weeks. The standard describes the process to be used and also provides a template for the top-level documentation. The instructional module’s sequence of mini-lectures and exercises associated with the use of this (and other) local standards are used throughout the course, which perforce covers more abstract software engineering material using traditional reading and writing assignments. The sequence of mini-lectures and hands-on assignments (many of which are done in small groups) constitutes an instructional module that can be used in any similar software engineering course.

Creative Commons Olympics. How Big Media is Learning to License From Amateur Authors

NBC Universal’s decision to use Creative Commons-licensed photographs in an Olympic broadcast is an example of how media conglomerates are experimenting with collaboration with amateurs, but it also reveals potential problems of letting non-lawyers negotiate copyright licensing agreements. In the process, NBC’s producers nearly opened the door for a multimillion-dollar infringement law suit. To avoid such pitfalls, media companies need to adopt policies and best practices for using amateur licensed works. These guidelines should instruct how a production can attribute collaborating authors and how the Open Content licensing terms affect the licensing of the productions. The guidelines should also instruct how producers can seek alternative licensing arrangements with amateurs and contribute back to the Open Content community.

Learning in Virtual Worlds: Research and Applications

Three-dimensional (3D) immersive virtual worlds have been touted as being capable of facilitating highly interactive, engaging, multimodal learning experiences. Much of the evidence gathered to support these claims has been anecdotal but the potential that these environments hold to solve traditional problems in online and technology-mediated education—primarily learner isolation and student disengagement—has resulted in considerable investments in virtual world platforms like Second Life, OpenSimulator, and Open Wonderland by both professors and institutions. To justify this ongoing and sustained investment, institutions and proponents of simulated learning environments must assemble a robust body of evidence that illustrates the most effective use of this powerful learning tool. In this authoritative collection, a team of international experts outline the emerging trends and developments in the use of 3D virtual worlds for teaching and learning. They explore aspects of learner interaction with virtual worlds, such as user wayfinding in Second Life, communication modes and perceived presence, and accessibility issues for elderly or disabled learners. They also examine advanced technologies that hold potential for the enhancement of learner immersion and discuss best practices in the design and implementation of virtual world-based learning interventions and tasks. By evaluating and documenting different methods, approaches, and strategies, the contributors to Learning in Virtual Worlds offer important information and insight to both scholars and practitioners in the field. AU Press is an open access publisher and the book is available for free in PDF format as well as for purchase on our website: http://bit.ly/1W4yTRA

Taking the Law into Your Own Hands: Establishing an In-house Book Repair Program

Law collections pose some unique problems in terms of their physical care due to filing and updating practices, use patterns and special binding structures such as loose-leafs and pocket parts. This workshop is designed to address specific preservation needs of law collections through lecture, demonstration and hands-on opportunities. Participants will learn the fundamentals of book repair, treatment options and decision-making, and preservation best practices. Emphasis will be placed on moving knowledge into practice through guidelines for establishing institution-appropriate in house book repair programs, by training the trainers in basic book repair techniques and providing all participants with a start-up tool kit.

Tools for better SLM knowledge management and informed decision-making in addressing land degradation at different scales: the WOCAT–LADA–DESIRE methodology

Desertification research conventionally focuses on the problem – that is, degradation – while neglecting the appraisal of successful conservation practices. Based on the premise that Sustainable Land Management (SLM) experiences are not sufficiently or comprehensively documented, evaluated, and shared, the World Overview of Conservation Approaches and Technologies (WOCAT) initiative (www.wocat.net), in collaboration with FAO’s Land Degradation Assessment in Drylands (LADA) project (www.fao.org/nr/lada/) and the EU’s DESIRE project (http://www.desire-project.eu/), has developed standardised tools and methods for compiling and evaluating the biophysical and socio-economic knowledge available about SLM. The tools allow SLM specialists to share their knowledge and assess the impact of SLM at the local, national, and global levels. As a whole, the WOCAT–LADA–DESIRE methodology comprises tools for documenting, self-evaluating, and assessing the impact of SLM practices, as well as for knowledge sharing and decision support in the field, at the planning level, and in scaling up identified good practices. SLM depends on flexibility and responsiveness to changing complex ecological and socioeconomic causes of land degradation. The WOCAT tools are designed to reflect and capture this capacity of SLM. In order to take account of new challenges and meet emerging needs of WOCAT users, the tools are constantly further developed and adapted. Recent enhancements include tools for improved data analysis (impact and cost/benefit), cross-scale mapping, climate change adaptation and disaster risk management, and easier reporting on SLM best practices to UNCCD and other national and international partners. Moreover, WOCAT has begun to give land users a voice by backing conventional documentation with video clips straight from the field. To promote the scaling up of SLM, WOCAT works with key institutions and partners at the local and national level, for example advisory services and implementation projects. Keywords: Sustainable Land Management (SLM), knowledge management, decision-making, WOCAT–LADA–DESIRE methodology.

Desertification mitigation and water harvesting based on sustainable land management

Traditionally, desertification research has focused on degradation assessments, whereas prevention and mitigation strategies have not sufficiently been emphasised, although the concept of sustainable land management (SLM) is increasingly being acknowledged. SLM strategies are interventions at the local to regional scale aiming at increasing productivity, protecting the natural resource base, and improving livelihoods. The global WOCAT initiative and its partners have developed harmonized frameworks to compile, evaluate and analyse the impact of SLM practices around the globe. Recent studies within the EU research project DESIRE developed a methodological framework that combines a collective learning and decision-making approach with use of best practices from the WOCAT database. In-depth assessment of 30 technologies and 8 approaches from 17 desertification sites enabled an evaluation of how SLM addresses prevalent dryland threats such as water scarcity, soil and vegetation degradation, low production, climate change, resource use conflicts and migration. Among the impacts attributed to the documented technologies, those mentioned most were diversified and enhanced production and better management of water and soil degradation, whether through water harvesting, improving soil moisture, or reducing runoff. Water harvesting offers under-exploited opportunities for the drylands and the predominantly rainfed farming systems of the developing world. Recently compiled guidelines introduce the concepts behind water harvesting and propose a harmonised classification system, followed by an assessment of suitability, adoption and up-scaling of practices. Case studies go from large-scale floodwater spreading that make alluvial plains cultivable, to systems that boost cereal production in small farms, as well as practices that collect and store water from household compounds. Once contextualized and set in appropriate institutional frameworks, they can form part of an overall adaptation strategy for land users. More field research is needed to reinforce expert assessments of SLM impacts and provide the necessary evidence-based rationale for investing in SLM. This includes developing methods to quantify and value ecosystem services, both on-site and off-site, and assess the resilience of SLM practices, as currently aimed at within the new EU CASCADE project.

Integrating Web-based Curricula into Allied Health Programs

This workshop will include \"Best Practices\" related to the integration of web-based instruction into allied health programs or courses. [See PDF for complete abstract]

Gutachten zu den ökologischen Anforderungen an das Inverkehrbringen von Produkten erstattet dem Bundesamt für Umwelt BAFU

Das schweizerische Verfassungsrecht belässt dem Gesetzgeber einen hinreichenden Spielraum, Massnahmen bezüglich der Inverkehrsetzung von importierten Produkten nach Massgabe von Anforderungen an die Produktionsbedingungen im Exportland (Production and Process Methods, PPMs) im Bereich der untersuchten Produkte (Palmöl, Soya, biogene Treibstoffe, Textilien, Baumwolle) im Rahmen eines Bundesgesetzes zu erlassen. Der Gestaltungsspielaum bemisst sich im einzelnen nach den detaillierten Bestimmungen des WTO Rechts. Dabei steht die Förderung freiwilliger Labels und von internationalen Standards für Best Practices im Vordergrund. Es schliesst indessen auch einseitige Import- restriktionen auf Grund von PPMs nicht aus, soweit vorgängig durchgeführte Verhand- lungen mit den Exportstaaten nicht zielführend sind und freiwillige Massnahmen nicht genügen. Das kann vor allem im Rohstoffhandel und im Konzernhandel (intrafirm trade) zutreffen. Die Regelungen unterliegen einer Verhältnismässigkeitsprüfung und sie dürfen sich nicht zum Schutze der einheimischen Industrie auswirken. Das GATT-recht erlaubt auch zollrechtliche Massnahmen als Mittel und Anreiz zur Förderung von Best Practices im Exportstaat. Das Freihandelsabkommen Schweiz-EU folgt den gleichen Grundsätzen, schliesst indessen zollrechtliche Massnahmen bezüglich der erfassten Produkte aus. Das Bundesgesetz über die Beseitigung technischer Handelshemmnisse verlangt die Anpassung an EU-rechtliche PPM Standards, soweit diese bestehen. Damit werden auch Spannungen im Rahmen des Freihandelsabkommens vermieden. Das THG erlaubt aber auch die ein- seitige Entwicklung von Best Practices und damit die Schaffung von Anreizen für die Ent- wicklung internationaler Standards. Das Cassis-de-Dijon Prinzip findet vorliegend keine unmittelbare Anwendung. Die hier behandelten Importregelungen beschränken sich auf die Rohstoffe und die unmittelbar daraus gewonnenen Basisprodukte. Sie lassen sich nicht auf verarbeitete Produkte übertragen. Diese können nur im Rahmen einer internationalen Harmonisierung miteinbezogen werden, welche alle Stufen der Verarbeitungsskette zu erfassen vermögen. Dies kann im Alleingang nicht erreicht werden.

Ökologische Anforderungen an das Inverkehrbringen von Produkten: USG-Revision und Spielräume im internationalen Recht

Der verfassungsrechtliche Spielraum des Gesetzgebers bei der Konkretisierung der Ziele der Nachhaltigkeit im Wirtschafts- und Umweltrecht wird in erster Linie durch die völkerrechtlichen Rahmenbedingungen der WTO sowie die Rechtsbeziehungen der Schweiz mit der EU definiert. Der vorliegende Beitrag behandelt die Frage, ob und inwieweit die Einfuhr von Rohstoffen und unmittelbar daraus gewonnenen Basisprodukten von einer nachhaltigen Produktionsweise im Ausland abhängig gemacht werden darf. Diese Thematik ist in der Umwelt- und Klimapolitik von zunehmender Bedeutung. Herstellungsverfahren und ihre Auswirkungen auf Mensch und Umwelt rücken in den Vordergrund. Der Beitrag zeigt auf, dass die Förderung von freiwilligen Labels und internationalen Standards für Best Practices zwar im Vordergrund steht, einseitige Importrestriktionen von Produkten anknüpfend am Kriterium von sog. PPM (Production and Process Methods) im Rahmen des WTO-Rechts jedoch nicht ausgeschlossen sind, sofern die Grundsätze der Nichtdiskriminierung sowie der Verhältnismässigkeit beachtet werden und vorgängig eine einvernehmliche Lösung mit dem Exportstaat angestrebt wird. Solche Importrestriktionen haben – nebst freiwilligen Massnahmen − als wichtige Instrumente der Umwelt- und Klimapolitik in der Rechtsprechung Anerkennung gefunden. Dies sowohl im Rahmen des Allgemeinen Zoll- und Handelsabkommens als auch des Abkommens zur Beseitigung technischer Handelshemmnisse. Bisher wenig genutzte Möglichkeiten, die Einfuhr zu begrenzen, bestehen darüber hinaus in der Zollpolitik für Produkte, die von ausserhalb des Europäischen Wirtschaftraumes eingeführt werden. Das Freihandelsabkommen zwischen der Schweiz und der EU folgt im Wesentlichen den gleichen Grundsätzen wie das WTO-Recht und lässt PPMs als Unterscheidungsmerkmale für an sich gleichartige Produkte ebenfalls grundsätzlich zu.

Innovative capacity development approaches for the ERA-ARD project

The aim of the present paper is: 1. To provide definitions and outline trends in capacity development in Agricultural Research for Development (ARD) 2. to summarize the findings and recommendations of recent documents on planning and conducting capacity development activities in ARD 3. to present a summary and a compilation of best practices and innovative capacity development approaches among ERA-ARD consortium members 4. to derive basic principles for capacity development in ARD and to define entry points for joint and/or transnational activities to strengthen capacity development in ARD.