Análise calorimétrica de cervejas produzidas utilizando cevada como adjunto de malte

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Alimentos tóxicos para cães e gatos

Pet animals are closer to their owners and for this reason erroneously share the same alimentation. Several substances can cause intoxication or poisoning in dogs and cats, being many of those also found in human food. Some foods that are edible for humans or even to other animal species can be risky for dogs and cats due to different metabolic pathways, and further damage can be caused depending on the amount or concentration consumed. Poisoning in animals occur intentionally or accidentally in the household of its owner, occurring acute onset of clinical signs. Thus, the objective of this review was to present the food products for humans that cannot be given to dogs and cats as well as clinical signs characteristic of a toxicosis, also demonstrating the therapy for the damage created by consumption of those substances. This review explores the mechanisms of action and clinical signs of toxicosis caused by chocolate, xylitol, macadamia nuts, onions, garlic, grapes and raisins, avocado, alcoholic beverages and milk.

Suco integral de amora (Morus nigra L.) obtido através de prensagem e despolpamento: rendimento e caracterização físico-química

Mulberry (Morus nigra L.) is a fruit with a great potential for technological uses, which could be employed to manufacture of syrups, ice cream, candies, yoghurts, beverages, jam, etc. Only the leaf from mulberry trees is commercially used for silkworm feeding. This tree is cultivated on many agricultural environments such as small rural proprieties and settlements. Small farmers waste a great amount of their production for not knowing about mulberry technology. Thus, the objective of this work was to access extraction yield and physical-chemical properties of mulberry whole juice from ripe, green and a mixture of both by using press and depulper. Statistical analysis of results was carried by media and standard deviation calculations. 173 kg of mulberry were picked being 49.31% ripe and 50.68% green. Press delivered greater extraction yield of whole juice (80.50% to 81.60%) when compared to press (71.43% to 77.50%). Whole juice obtained from both equipments has shown the following values: soluble solids 7.45% - 12.11%, titrable acidity 0.45 – 1.23%, ratio 6.03 – 26.84, pH 3.69 – 4.35, total reducing sugar 4.05% – 9.96%, reducing sugar 3.95% - 9.15%, sucrose 0.00% - 0.04%, turbidity 221.25 NTU - >4,000 NTU. Whole juices obtained from both equipments has shown similar physical-chemical characteristics except turbidity. The authors concluded that press was the best extraction equipment due to its greater yield and whole juice quality regarding turbidity

Caracterização química e sensorial de bebida mista de soja e uva

The aim of this study was to produce mix beverages of grape juice and soybean hydrosoluble extract (SHE) in laboratory scale. The raw materials were soybean (variety BRS 213), grape (species Vitis labrusca, variety Niagara Rosada), citric pectin, water and sugar. The mix beverage was produced with different proportions of SHE and grape juice (1:1; 1:1.5 and 1:2; respectively; m/m) and different soluble solids concentrations (10, 12 and 14 °Brix) obtained by adding granulated sugar (sucrose). Soybean hydrosoluble extract, grape juice and mix beverages were chemically analyzed (humidity, ash, protein, lipids, carbohydrate, reducing sugars, total reducing sugars, sucrose, titratable acidity and pH). The mix beverages were sensorial analyzed through the acceptance test (hedonic scale). The results of chemically analyzed were expressed as mean and standard deviation and the results of sensorial analyzed were submitted to variance analysis and the means were compared using the Tukey test at 5% of probability. The pH of mix beverages was lower than 3.9, without addition of acidulants. Sugar addition to mix beverages (10; 12 and 14ºBrix) increased the levels of soluble solids, total reducing sugar and carbohydrates, but it did not interfere in the reducing sugar concentration. The increased proportion of grape juice in mix beverages allowed observing the elevation of titratable acidity and reducing sugars levels, as well as the pH reduction. The increase of grape juice in mix beverage did not interfere in the acceptance of mix beverages. The more sweetened beverages were preferred by the sensory panel.

Análise energética de bebida mista de extrato hidrossolúvel de soja e suco de amora

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Proposta de metodologia para gestão de produção, visando redução no consumo de energia elétrica em uma unidade fabril do setor de bens de consumo

Actually the energy efficiency is making more space in the industry, due to the search for the sustainability, the electrical energy costs reduction, the goals achievement or the efficiency of production processes. In consumer goods industries, such a beverage industry, as the work is based, the productivity is directly related to the electrical energy consumption. The development of methodologies and/or routines, in addition to some tools which allow to align more efficiently these two aspects (production and consumption of electrical energy), in the viewpoint of the Energy Conservation, is very important. In this case, the study will show the Plant Modulation concepts, a production management methodology, based in some factors related to the productive process, installed equipment, production supplies and energy cost. The proposed methodology was implanted in a plant along 2015 and show the results, in face to confirm its efficiency. Finally, in this study, it was shown the capacity of Plant Modulation to positively impact in the energy efficiency inside a big industry

Análise e comparação de orelhamento na liga AA3104 após laminação a quente

Aluminum has been widely used in the forming and manufacture of beverage cans, specific aluminum alloy AA3104, which manufacturers are increasingly demanding as to mechanical properties, quality and reducing waste. This work describes the analysis and comparison of the behavior of earing AA3104 aluminum alloy samples of final thicknesses of 1.80 and 2.10 mm. Were obtained after a hot rolling process, a total population of 86 samples for the two different thicknesses, of which 23 samples of 1.80 mm and 2.10 mm 63 samples. After removal of samples, there was a mechanical test inlay, then characterizing the earing in them. The results earing to the thicknesses of 1.80 and 2.10 mm were analyzed and compared statistically to give 7.1% and 7.4% on average, respectively, correlated with the hot rolling process variables, showing that they are statistically equal and that the process variables do not affect the end result desired, ranging from 7.0 to 7,5%

Prevalência da síndrome metabólica em moradores adultos do Arquipélago de Fernando de Noronha (PE)-Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Proposta de metodologia para gestão de produção, visando redução no consumo de energia elétrica em uma unidade fabril do setor de bens de consumo

Actually the energy efficiency is making more space in the industry, due to the search for the sustainability, the electrical energy costs reduction, the goals achievement or the efficiency of production processes. In consumer goods industries, such a beverage industry, as the work is based, the productivity is directly related to the electrical energy consumption. The development of methodologies and/or routines, in addition to some tools which allow to align more efficiently these two aspects (production and consumption of electrical energy), in the viewpoint of the Energy Conservation, is very important. In this case, the study will show the Plant Modulation concepts, a production management methodology, based in some factors related to the productive process, installed equipment, production supplies and energy cost. The proposed methodology was implanted in a plant along 2015 and show the results, in face to confirm its efficiency. Finally, in this study, it was shown the capacity of Plant Modulation to positively impact in the energy efficiency inside a big industry

Análise e comparação de orelhamento na liga AA3104 após laminação a quente

Aluminum has been widely used in the forming and manufacture of beverage cans, specific aluminum alloy AA3104, which manufacturers are increasingly demanding as to mechanical properties, quality and reducing waste. This work describes the analysis and comparison of the behavior of earing AA3104 aluminum alloy samples of final thicknesses of 1.80 and 2.10 mm. Were obtained after a hot rolling process, a total population of 86 samples for the two different thicknesses, of which 23 samples of 1.80 mm and 2.10 mm 63 samples. After removal of samples, there was a mechanical test inlay, then characterizing the earing in them. The results earing to the thicknesses of 1.80 and 2.10 mm were analyzed and compared statistically to give 7.1% and 7.4% on average, respectively, correlated with the hot rolling process variables, showing that they are statistically equal and that the process variables do not affect the end result desired, ranging from 7.0 to 7,5%

Prevalência da síndrome metabólica em moradores adultos do Arquipélago de Fernando de Noronha (PE)-Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cardiovascular risk among health professionals working in pre-hospital care services

The objective of this study was to assess the cardiovascular risk factors among health professionals, particularly hypertension, and stratify them according to the Framingham Risk Score (FRS). The participants were 154 professionals working in pre-hospital care in Sao Paulo, Brazil, and on the Br-116 highway. Values were considered significant for p<0.05. The prevalence of hypertension was 33%, 20.1% were smokers, 47% consumed alcoholic beverages, 64% were sedentary, 66% were obese/overweight and 70% had an altered abdominal circumference. In terms of laboratory values: glucose >= 110mg/dL11%, total cholesterol >= 200mg/dL-36%, LDL-c >= 130mg/dL-33%, HDL-c<60mg/dL89%, triglycerides >= 150mg/dL-30% and C reactive protein >= 0.5mg/dL-16%. The FRS was average in 10.3% and high in 1.3%. In logistic regression analysis, it was verified that hypertension was associated with: HDL-c (odds ratio: 0.257,) and FRS (odds ratio: 23.159). There was strong correlation between hypertension and FRS. Data are noteworthy, as this is a relatively young sample of health professionals.

Consumo de alimentos de origem animal e câncer de boca e orofaringe

OBJETIVO: Avaliar a relação entre alimentos de origem animal e câncer de boca e orofaringe. MÉTODOS: Estudo caso-controle, de base hospitalar, pareado por sexo e idade (± 5 anos) com a coleta de dados realizada entre julho de 2006 e junho de 2008. A amostra foi composta por 296 pacientes com câncer de boca e orofaringe e 296 pacientes sem histórico de câncer atendidos em quatro hospitais da cidade de São Paulo (SP), Brasil. Foi aplicado um questionário semiestruturado, para a coleta de dados relativos à condição socioeconômica e aos hábitos deletérios (tabaco e bebidas alcoólicas). Para avaliação do consumo alimentar, utilizou-se um questionário de frequência alimentar qualitativo. A análise se deu por meio de modelos de regressão logística multivariada, que consideraram a hierarquia existente entre as características estudadas. RESULTADOS: Entre os alimentos de origem animal, o consumo frequente de carne bovina (OR = 2,73; IC95% = 1,27-5,87; P < 0,001), bacon (OR = 2,48; IC95% = 1,30-4,74; P < 0,001) e ovos (OR = 3,04; IC95% = 1,51-6,15; P < 0,001) estava relacionado ao aumento no risco de câncer de boca e orofaringe, tanto na análise univariada quanto na multivariada. Entre os laticínios, o leite apresentou efeito protetor contra a doença (OR = 0,41; IC95% = 0,21-0,82; P < 0,001). CONCLUSÕES: O presente estudo sustenta a hipótese de que alimentos de origem animal podem estar relacionados à etiologia do câncer de boca e orofaringe. Essa informação pode orientar políticas preventivas contra a doença, gerando benefícios para a saúde pública.

Psychosocial and clinical predictors of retention in outpatient alcoholism treatment

Objective: One of the factors associated with low rates of compliance in the treatment for alcoholism seems to be the intensity of craving for alcohol. This study aimed to evaluate the associations between alcohol craving and biopsychosocial addiction model-related variables and to verify whether these variables could predict treatment retention. Methods: The sample consisted of 257 male alcoholics who were enrolled in two different pharmacological trials conducted at the Universidade de Sao Paulo in Brazil. Based on four factors measured at baseline - biological (age, race, and family alcoholism), psychiatric (depression symptoms), social (financial and marital status), and addiction (craving intensity, severity of alcohol dependence, smoking status, drinking history, preferential beverage, daily intake of alcohol before treatment) - direct logistic regression was performed to analyze these factors' influence on treatment retention after controlling for medication groups and AA attendance. Results: Increasing age, participation in Alcoholics Anonymous groups, and beer preference among drinkers were independently associated with higher treatment retention. Conversely, higher scores for depression increased dropout rates. Conclusion: Health services should identify the treatment practices and therapists that improve retention. Information about patients' characteristics linked to dropouts should be studied to render treatment programs more responsive and attractive, combining pharmacological agents with more intensive and diversified psychosocial interventions.

Audiometric evaluation of patients treated for pulmonary tuberculosis

Objective: To evaluate the hearing status of patients being treated for pulmonary tuberculosis at referral hospitals in Brazil. Methods: This was a descriptive study involving 97 male and female inpatients/outpatients between 18 and 60 years of age who were undergoing treatment for active pulmonary tuberculosis at one of two referral hospitals in the state of Rio de Janeiro. After being interviewed, all of the patients underwent pure tone audiometry. Results: OF the 97 patients studied, 65 (67%) were male, 52 (54%) were receiving first-line treatment, and 45 (46%) were receiving second-line treatment, which included aminoglycosides. Smoking, alcohol consumption, exposure to noise, and ototoxic medication use were identified in 65 (67%), 51 (53%), 53 (55%), and 45 (46.4%) of the patients, respectively. The most common auditory and vestibular complaints were dizziness, in 28 patients (28.8%); tinnitus, in 27 (27.8%); and hypoacusis, in 23 (23.7%). Conclusions: Due to the great number of patients with hearing loss in the present study, we recommend that all patients under tuberculosis treatment be submitted to auditory monitoring.