Longitudinal Poisson modeling: an application for CD4 counting in HIV-infected patients

In this paper, we present different ofrailtyo models to analyze longitudinal data in the presence of covariates. These models incorporate the extra-Poisson variability and the possible correlation among the repeated counting data for each individual. Assuming a CD4 counting data set in HIV-infected patients, we develop a hierarchical Bayesian analysis considering the different proposed models and using Markov Chain Monte Carlo methods. We also discuss some Bayesian discrimination aspects for the choice of the best model.

Discontinuous local semiflows for Kurzweil equations leading to LaSalle`s invariance principle for differential systems with impulses at variable times

In this paper, we consider an initial value problem for a class of generalized ODEs, also known as Kurzweil equations, and we prove the existence of a local semidynamical system there. Under certain perturbation conditions, we also show that this class of generalized ODEs admits a discontinuous semiflow which we shall refer to as an impulsive semidynamical system. As a consequence, we obtain LaSalle`s invariance principle for such a class of generalized ODEs. Due to the importance of LaSalle`s invariance principle in studying stability of differential systems, we include an application to autonomous ordinary differential systems with impulse action at variable times. (C) 2011 Elsevier Inc. All rights reserved.

A discontinuous-Galerkin-based immersed boundary method with non-homogeneous boundary conditions and its application to elasticity

We propose a discontinuous-Galerkin-based immersed boundary method for elasticity problems. The resulting numerical scheme does not require boundary fitting meshes and avoids boundary locking by switching the elements intersected by the boundary to a discontinuous Galerkin approximation. Special emphasis is placed on the construction of a method that retains an optimal convergence rate in the presence of non-homogeneous essential and natural boundary conditions. The role of each one of the approximations introduced is illustrated by analyzing an analog problem in one spatial dimension. Finally, extensive two- and three-dimensional numerical experiments on linear and nonlinear elasticity problems verify that the proposed method leads to optimal convergence rates under combinations of essential and natural boundary conditions. (C) 2009 Elsevier B.V. All rights reserved.

A robust Bayesian approach to null intercept measurement error model with application to dental data

Measurement error models often arise in epidemiological and clinical research. Usually, in this set up it is assumed that the latent variable has a normal distribution. However, the normality assumption may not be always correct. Skew-normal/independent distribution is a class of asymmetric thick-tailed distributions which includes the Skew-normal distribution as a special case. In this paper, we explore the use of skew-normal/independent distribution as a robust alternative to null intercept measurement error model under a Bayesian paradigm. We assume that the random errors and the unobserved value of the covariate (latent variable) follows jointly a skew-normal/independent distribution, providing an appealing robust alternative to the routine use of symmetric normal distribution in this type of model. Specific distributions examined include univariate and multivariate versions of the skew-normal distribution, the skew-t distributions, the skew-slash distributions and the skew contaminated normal distributions. The methods developed is illustrated using a real data set from a dental clinical trial. (C) 2008 Elsevier B.V. All rights reserved.

Reduction kinetics of NiO-YSZ composite for application in solid oxide fuel cell

A porous nickel-8 mol% yttria stabilized zirconia (Ni-8YSZ) composite, used as anode for solid oxide fuel cell, was obtained by reduction of NiO-8YSZ cermet. The first goal was the evaluation of the temperature effect of powder processing by thermogravimetry. In addition, the influence of porosity in the reduction kinetic of the sample sintered at 1450 A degrees C was evaluated. The final porosity produced in NiO-8YSZ composite by pore former was 30.4 and 37.9 vol.%, respectively, for 10 and 15 mass% of corn starch. The sample with 15 mass% of corn starch promotes a reduction rate almost twice higher than sample with 10 mass% of corn starch. The porosity introduced by the reduction of NiO was 23 vol.%.

Flockning och förtjockning i High-Rate-förtjockare – en jämförelse med konventionell förtjockarteknik och lamellsedimentering.

In the process laboratory of Metso minerals (Sala) AB, continuous tests have been made with a laboratory unit High-Rate thickener. The tests are made in order to compare three methods of thickening techniques of suspended solids. The three techniques are High-Rate thickening, conventional thickening and lamella thickening. The High-Rate and the conventional trials are based on a continuous method, while the lamella thickener is based on batch trials. Because the lamella thickener is based on batch trials and there were some optimization problems with the adding point of the flocculant at the continuous trials, it was not feasible to compare the lamella thickener with the other two thickener types. On the other hand, since the optimization problems were the same for the other two methods there was no problem comparing them. The result of the comparison between the High-Rate thickener and the conventional thickener, was, that the High-Rate thickener manages to work at a higher rise rate with a lower consumption of flocculant than the conventional thickener. Seeing to the unit area that is needed by each thickener it is apparent that the conventional thickener demands a higher unit area than the High-Rate thickener to achieve the same amount of solids in the underflow. It has also been showed that the High-Rate thickener demands a lesser quantity of flocculant at the same amount of suspended solids in the feed than the conventional thickener.

Trade effects of exchange rate fluctuations: Evidence from Sweden

An overview of the theoretical literature for the last two decades suggests that there is no clear-cut relationship one can pin down between exchange rate volatility and trade flows. Analytical results are based on specific assumptions and only hold in certain cases. Especially, the impact of exchange rate volatility on export and import activity investigated separately leads also to dissimilar conclusions among countries studied. The general presumption is that an increase in exchange rate volatility will have an adverse effect on trade flows and consequently, the overall heath of the world economy. However, neither theoretical models nor empirical studies provide us with a definitive answer, leaving obtained results highly ambiguous and inconsistent (Baum and Caglayan, 2006). We purposed to empirically investigate trade effects of exchange rate fluctuations in Sweden from the perspective of export and import in this research. The data comprises period from January 1993 to December 2006, where export and import volumes are considered from the point of their determinants, including exchange rate volatility, which has been measured through EGARCH model. The results for the case of Sweden show that short run dynamics of volatility negatively associated with both export and import, whereas considered from the case of previous period volatility it exhibits positive relationship. These results are consistent with the most findings of prior studies, where the relationship remained ambiguous.

Residual-based test for Nonlinear Cointegration with application in PPPs

Nested by linear cointegration first provided in Granger (1981), the definition of nonlinear cointegration is presented in this paper. Sequentially, a nonlinear cointegrated economic system is introduced. What we mainly study is testing no nonlinear cointegration against nonlinear cointegration by residual-based test, which is ready for detecting stochastic trend in nonlinear autoregression models. We construct cointegrating regression along with smooth transition components from smooth transition autoregression model. Some properties are analyzed and discussed during the estimation procedure for cointegrating regression, including description of transition variable. Autoregression of order one is considered as the model of estimated residuals for residual-based test, from which the teststatistic is obtained. Critical values and asymptotic distribution of the test statistic that we request for different cointegrating regressions with different sample sizes are derived based on Monte Carlo simulation. The proposed theoretical methods and models are illustrated by an empirical example, comparing the results with linear cointegration application in Hamilton (1994). It is concluded that there exists nonlinear cointegration in our system in the final results.

Rate Scheduling for HSDPA in UMTS

The introduction of a new technology High Speed Downlink Packet Access (HSDPA) in the Release 5 of the 3GPP specifications raises the question about its performance capabilities. HSDPA is a promising technology which gives theoretical rates up to 14.4 Mbits. The main objective of this thesis is to discuss the system level performance of HSDPAMainly the thesis exploration focuses on the Packet Scheduler because it is the central entity of the HSDPA design. Due to its function, the Packet Scheduler has a direct impact on the HSDPA system performance. Similarly, it also determines the end user performance, and more specifically the relative performance between the users in the cell.The thesis analyzes several Packet Scheduling algorithms that can optimize the trade-off between system capacity and end user performance for the traffic classes targeted in this thesis.The performance evaluation of the algorithms in the HSDPA system are carried out under computer aided simulations that are assessed under realistic conditions to predict the results as precise on the algorithms efficiency. The simulation of the HSDPA system and the algorithms are coded in C/C++ language

MODELLING AND FORECASTING INFLATION RATES IN GHANA: AN APPLICATION OF SARIMA MODELS

Ghana faces a macroeconomic problem of inflation for a long period of time. The problem in somehow slows the economic growth in this country. As we all know, inflation is one of the major economic challenges facing most countries in the world especially those in African including Ghana. Therefore, forecasting inflation rates in Ghana becomes very important for its government to design economic strategies or effective monetary policies to combat any unexpected high inflation in this country. This paper studies seasonal autoregressive integrated moving average model to forecast inflation rates in Ghana. Using monthly inflation data from July 1991 to December 2009, we find that ARIMA (1,1,1)(0,0,1)12 can represent the data behavior of inflation rate in Ghana well. Based on the selected model, we forecast seven (7) months inflation rates of Ghana outside the sample period (i.e. from January 2010 to July 2010). The observed inflation rate from January to April which was published by Ghana Statistical Service Department fall within the 95% confidence interval obtained from the designed model. The forecasted results show a decreasing pattern and a turning point of Ghana inflation in the month of July.

Chinese Basic Pension Substitution Rate: A Monte Carlo Demonstration of the Individual Account Model

At the end of 2005, the State Council of China passed ”The Decision on adjusting the Individual Account of Basic Pension System”, which adjusted the individual account in the 1997 basic pension system. In this essay, we will analyze the adjustment above, and use Life Annuity Actuarial Theory to establish the basic pension substitution rate model. Monte Carlo simulation is also used to prove the rationality of the model. Some suggestions are put forward associated with the substitution rate according to the current policy.

Personalized Communications : A Cross Media tool for the future

Personalized communication is when the marketing message is adapted to each individual by using information from a databaseand utilizing it in the various, different media channels available today. That gives the marketer the possibility to create a campaign that cuts through today’s clutter of marketing messages and gets the recipients attention. PODi is a non-profit organization that was started with the aim of contributing knowledge in the field of digital printingtechnologies. They have created a database of case studies showing companies that have successfully implemented personalizedcommunication in their marketing campaigns. The purpose of the project was therefore to analyze PODi case studies with the main objective of finding out if/how successfully the PODi-cases have been and what made them so successful. To collect the data found in the PODi cases the authors did a content analysis with a sample size of 140 PODi cases from the year 2008 to 2010. The study was carried out by analyzing the cases' measurable ways of success: response rate, conversion rate, visited PURL (personalized URL:s) and ROI (Return On Investment). In order to find out if there were any relationships to be found between the measurable result and what type of industry, campaign objective and media vehicle that was used in the campaign, the authors put up different research uestions to explore that. After clustering and merging the collected data the results were found to be quite spread but shows that the averages of response rates, visited PURL and conversion rates were consistently very high. In the study the authors also collected and summarized what the companies themselves claim to be the reasons for success with their marketing campaigns. The resultshows that the creation of a personalized campaign is complex and dependent on many different variables. It is for instance ofgreat importance to have a well thought-out plan with the campaign and to have good data and insights about the customer in order to perform creative personalization. It is also important to make it easy for the recipient to reply, to use several media vehicles for multiple touch points and to have an attractive and clever design.

A proposed Model for Country Branding : an experimental Application on Nigeria

In the era of globalization, countries compete with each other for attention, respect and trust of potential consumers, investors, tourists, media and governments of other nations. Branding is the most powerful tool that a nation can utilize for effective differentiation strategies and for creating competitive advantage over other nations. Unfortunately, not every nations or destination marketers have a broad understanding of the concept of branding and how a country can be successfully branded. Hence, this study has proposed a model that could be used as a valuable guide for country branding. Also the model is recommended for countries struggling with image crisis; on the mission to improve the image internationally. Nigeria is a good example of countries with image crisis; it is one of the most populated countries in the world with a population of about 160 million inhabitants and growth rate of 2.553percent annually. Despite the abundant resources (e.g. coal, petroleum, natural gas etc.) that the nation is endowed with, it is quite disappointing that the population below poverty line is still at the alarming rate of 70percent of the total population. The mismanagement and poor leadership of the nation characterised by corruption, fraud, embezzlement of public fund etc. has culminated into serious image crisis that is slowing down the potential for investment and economic growth. However, there has been series of image rebranding campaigns but no tangible achievement has been recorded. It is quite questionable though, if image rebranding will provide the kind of future that Nigeria envisaged, considering the socio-political situation and the economic imbalance; compounded by the obvious fact that the nation has no known brand. Therefore, this paper argues that there is need to redirect the effort invested on image rebranding to the creation of a unique and competitive brand for the country. It was established from the study that a nation’s brand is capable of improving the reputation of the nation as well as stimulate the expectation of the target audience. However, it was also established from the study that a wrong approach to branding could mislead the target audience and attract negative publicity. Hence, as a contribution of the study to the field of branding, a model was proposed as a functional guide for country branding. Also, considering the abysmal performance of Nigeria’s image in the international community and to strengthen the argument that brand creation is required for the country; an experimental application of the proposed model was conducted using Nigeria as the case country. The first phase of the model suggested a major improvement in the society; this is required to further enhance the strengths of the country and to motivate the much needed community participation and confidence in the brand creation. It is the conclusion of the study that a strong nation brand can offset the image problem if it is built on something concrete, genuine, and uniquely identifiable with the country, capable of connecting to the cognitive psychology of the target audience.

3D roll-forming of hat-profile with variable depth and width

The use of roll-formed products in automotive, furniture, buildings etc. increases every year due to the low part-production cost and the complicated cross-sections that can be produced. The limitation with roll-forming until recent years is that one could only produce profiles with a constant cross-section in the longitudinal direction. About eight years ago ORTIC AB [1] developed a machine in which it was possible to produce profiles with a variable width (“3D roll-forming”) for the building industry. Experimental equipment was recently built for research and prototyping of profiles with variable cross-section in both width and depth for the automotive industry. The objective with the current study is to investigate the new tooling concept that makes it possible to roll-form hat-profiles, made of ultra high strength steel, with variable cross-section in depth and width. The result shows that it is possible to produce 3D roll-formed profiles with close tolerances.

Electrical Evaluation of a Low Concentrating PVT Collector Based on Performance Ratio

Photovoltaic Thermal/Hybrid collectors are an emerging technology that combines PV and solar thermal collectors by producing heat and electricity simultaneously. In this paper, the electrical performance evaluation of a low concentrating PVT collector was done through two testing parts: power comparison and performance ratio testing. For the performance ratio testing, it is required to identify and measure the factors affecting the performance ratio on a low concentrating PVT collector. Factors such as PV cell configuration, collector acceptance angle, flow rate, tracking the sun, temperature dependence and diffuse to irradiance ratio. Solarus low concentrating PVT collector V12 was tested at Dalarna University in Sweden using the electrical equipment at the solar laboratory. The PV testing has showed differences between the two receivers. Back2 was producing 1.8 energy output more than Back1 throughout the day. Front1 and Front2 were almost the same output performance. Performance tests showed that the cell configuration for Receiver2 with cells grouping (6- 32-32-6) has proved to have a better performance ratio when to it comes to minimizing the shading effect leading to more output power throughout the day because of lowering the mismatch losses. Different factors were measured and presented in this thesis in chapter 5. With the current design, it has been obtained a peak power at STC of 107W per receiver. The solar cells have an electrical efficiency of approximately 19% while the maximum measured electrical efficiency for the collector was approximately 18 % per active cell area, in addition to a temperature coefficient of -0.53%/ ˚C. Finally a recommendation was done to help Solarus AB to know how much the electrical performance is affected during variable ambient condition and be able to use the results for analyzing and introducing new modification if needed.