957 resultados para non-destructive test


Relevância:

80.00% 80.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEIS

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEIS

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Sparse arrays have pitch larger than half-wavelength (lambda/2) and there is a reduced number of elements in comparison with a full-populated array. Consequently, there is a reduction in cost, data acquisition and processing. However, conventional beamforming techniques result in large side and grating lobes, and consequently in image artifacts. In this work the instantaneous phase of the signals is used in a beamforming technique instead of the instantaneous amplitudes to improve images obtained from sparse arrays configurations. A threshold based on a statistical analysis and the number of signals used for imaging is applied to each pixel, in order to determine if that pixel is related to a defect or not. Three sets of data are used to evaluate the technique, considering medical and non-destructive testing: a simulated point spread function, a medical phantom and an aluminum plate with 2 lambda-, 7 lambda- and lambda-pitch, respectively. The conventional amplitude image is superposed by the image improved by the instantaneous phase, increasing the reflectors detectability and reducing artifacts for all cases, as well as dead zone for the tested plate.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The aim of this work was to evaluate the genetics divergence of bean genotypes in relation to the oviposition, feeding and development of Zabrotes subfasciatus, determining the degrees of resistance to the weevil. The genotypes used were: IAC Carioca-Tybata, IAC Fortaleza, IAPAR 81, IAC Carioca-Ete, IAC Galante, IAC Harmonia, IAC Una, IAC Diplomata, BRS Supremo and RAZ 49. Tests were performed in laboratory under controlled humidity, temperature and photophase conditions. In free choice test, 10 g of bean genotypes seeds were distributed in circular openings placed equidistant from each other in aluminum trays, where 70 couples were released. The attractiveness was evaluated 24 hours and seven days after the experiment started, and then the number of eggs was evaluated. In non choice test, 10 g of seeds were used where seven couples of Z. subfasciatus, 24 hours-old, were released, remaining seven days, and after the adults retreat, the total number of eggs, viable and unviable eggs, the number and percentage of emerged adults, weight, longevity and period from egg to adult of males and females, sex ratio, dry mass and dry mass consumed by insect were evaluated. In the genotype IAC Harmonia was observed the lower oviposition; RAZ 49 was the most non preference-type resistant for feeding and/or antibiosis-type resistant; BRS Supremo, IAC Carioca-Ete and IAPAR 81 are no preference for feeding and/or antibiosis-type moderate resistant; IAC Galante is susceptible and the other genotypes are highly susceptible to Z. subfasciatus.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Since the 1950s, fatigue is the most important project and operational consideration for both civil and military aircrafts. For some aircraft models the most loaded component is one that supports the motor: the Motor Cradle. Because they are considered critical to the flight safety the aeronautic standards are extremely rigorous in manufacturing them by imposing a zero index of defects on the final weld quality (Safe Life), which is 100% inspected by Non-Destructive Testing/NDT. This study has as objective to evaluate the effects of up to four successive TIG welding repairs on the axial fatigue strength of an AISI 4130 steel. Tests were conducted on hot-rolled steel plate specimens, 0.89 mm thick, with load ratio R = 0.1, constant amplitude, at 20 Hz frequency and in room temperature, in accordance with ASTM E466 Standard. The results were related to microhardness and microstructural and geometric changes resulting from welding cycles.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Elétrica - FEIS

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Introduction: Parkinson’s Disease (PD) is characterized by a set of four motor symptoms: tremor, rigidity, bradykinesia and postural instability. These defi cits may predispose individuals to limitations resulting from falls and their secondary consequences. Objective: To evaluate the functional balance and quality of life (QoL) in individuals with PD and determine whether there is correlation between performance on tests of balance with the QoL. Method: The project was referred to the Ethics Committee in Research of Universidade Estadual Paulista “Julio de Mesquita Filho” Campus de Marília and was approved under protocol number 1806/09. Participated in this study with individuals diagnosed with PD between levels one and four in the Hoen and Yahr scale. The subjects were evaluated according to functional balance and QoL, respectively by the instruments: Functional Balance Scale Berg (EEFB), Time Up and Go test (TUG), and Parkinson’s Disease Questionnaire-39 (PDQ-39). To perform the statistical analysis used the GraphPad Prism 5. To perform the correlation analysis for the variables passed normality by the Shapiro-Wilk. Since the variables were non-parametric test was used Spearman. During the analysis the statistical signifi cance level was considered p ≤ 0, 05. Results: We studied 25 individuals aged between 54 and 85 years (71.20 ± 8.50), time of diagnosis between one and 39 years (6.54 ± 7.71) disease. Moderate correlation was found between the EEFB with QoL (r =- 0.6), and TUG with QoL (r = 0.6836). Among the aspects of QoL balance showed a higher correlation with the domains “mobility” (TUG r = 0, 6768; EEFB r = -0.6155) and “Activities of daily living” (TUG r = 0, 7357, and EEFB r = -0.6521). Conclusion: Patients with Parkinson’s disease show defi cits in balance and QoL. The balance disorders have a high correlation among themselves and show how aspects of QoL.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Introduction: Some losses resulting from aging can be minimized with the practice of resistive exercises. Objective: To analyze the effects of resistive exercises on flexibility, mobility, muscle strength and balance in the elderly. Method: Twenty elderly individuals were divided between an activity group (AG, n=10; 66.1±6.35 years) and a control group (CG, n=10; 65.4±7.54 years). Mobility, flexibility, muscle strength and balance were evaluated. The AG participated in the training for 13 weeks (one-hour sessions, twice a week). The Wilcoxon non-parametric test (intra-group analysis) was used to analyze the data. A significance level of 5% (p<0.05) was adopted. Results: After training, the AG presented better mobility, lower limb muscle strength, and balance, but no difference in flexibility. Conclusion: The present study allows us to conclude that resistive exercises were able to improve mobility, lower limb muscle strength and balance in elderly individuals.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Introduction: the improvements on the health area increased the brazilians life expectative. Because of it, more people becomes elder, passing through various common processes of aging, as the balance decrease. Resulting form this the risk of fall increase, and this has a negative impact on the quality of life. As more people become elder the institutionalization tax increase. Objectives: compare the balance and quality of life between institutionalized and non-institutionalized elders; correlate the Berg Balance Scale (BBS) with the Timed Up and Go test (TUG) and with the questionnaire “The Medical Outcome Study 36 – Item Short-Form Health Survey” (SF-36). Methods: were evaluated 20 elders, ten institutionalized (GI) and ten non-institutionalized (GNI). To the balance assessment were used the BBS and the TUG, the quality of life was evaluated using the SF-36. The signifi cance level was set to 5% (p<0,05). The GraphPad Prism 5# was used to analyze the data. To identify the distribution of the data was applied the Shapiro-Wilk test. In the comparison between groups, the normal distributed data were analyzed with the Unpaired Student t test. The non-normal distributed data were analyzed with the Mann-Whitney non-parametric test. The correlations were analyzed with the Pearson (normal data) and Spearman’s (non-normal data) tests. Results: the age average for each group was 72,8±8,36 years (GI) e 67,4±3,53 years (GNI). The GNI had a better performance than the GI in the BBS (*p=0,0017) as in the TUG (*p<0,0002). There wasn’t difference between the quality of life. There was correlation between EEB and TUG (-0,8907 for the GI and -0,7180 for the GNI) and between EEB and the functional capacity domain from the SF-36 (0,7657). Conclusion: the non-institutionalized elders presented best balance. It was found good correlation between TUG and BBS. In the studied sample, to be institutionalized didn’t infl uenced the quality of life.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

To perform the quality control of various industries like: petrochemical, nuclear, aerospace, steel, shipbuilding, pulp and paper, and inspection of welded products, castings, forgings, rolled products, among others, used the method of Non-Destructive Testing (NDT). The method is based on the physical properties of the material, so selecting a procedure more appropriate. The company Inter-Metro Serviços Especiais Ltda., with its cutting-edge laboratory, dedicated to the implementation of calibration services and measurement equipment for industrial, medical, occupational safety and Non-Destructive Testing (NDT). It has a trained team, providing guidance and providing support for improving procedures for testing and measuring

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The aim of this work was to evaluate the types of resistance of soybean genotypes to the attack of Spodoptera cosmioides (Walker, 1858), under laboratory conditions. Plants of the soybean genotypes, IAC 100, Dowling, PI 227687, PI 274454, BR 16, IGRA RA 626 RR, PI 227682, BRSGO 8360, IGRA RA 516 RR e P 98Y11 RR, were cultivated in vases and placed in a greenhouse in order to have their leaves used afterwards in free-choice and no-choice no-preference for feeding tests and evaluation of the biological parameters of S. cosmioides fed on the genotypes. For free-choice no preference for feeding test, 10 leaf discs were prepared and placed in Petri dishes equidistantly among themselves, and then two recently-hatched caterpillar per genotype were release in the center of the plate. The same test was performed for third instar larvae, so that one caterpillar per genotype was used. In non-choice test, only one genotype was used in each Petri dish, where two recently-hatched or one third instar caterpillars were released, respectively. For both tests, the attractiveness was assessed at 1, 3, 5, 10, 15, 30, 60, 120, 360, 720 and 1440 minutes after the release of the insects. In addition, the leaf area consumed was evaluated. Randomized blocks design and completely randomized design were used for free-choice and non-choice tests, respectively, with 10 replications. In biology test, recently-hatched larvae were transferred to Petri dishes with leaves of the genotypes, evaluating the period of larvae, pupae and overall (larvae + pupae), viability of larvae, pupae and overall, weight of 12 days-old larvae and 24 hours-old pupae and longevity of the adults. Completely randomized design was used for this test, with 30 replications. Genotypes IGRA RA 516 RR and IGRA RA 626 RR were the least and the most consumed by recently-hatched larvae of S. cosmioides, respectively, in non-choice non-preference for feeding test. Genotypes PI 274454 and PI 227687 were...

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The hardness has an important role in quality control, in research studies and metallurgical and mechanical specification, selection and comparison of various materials. This property is of extreme importance in the oil industry because it is a determining factor to ascertain the safety of the material used in pressure vessels and pipelines. Due to the inability to stop the equipment while checking the hardness, the hardness testers are widely used portable method UCI, its great advantage is the fact that an essay fast, simple realization and not be considered a non-destructive testing with a good relationship money. The objective is to determine if there is significant difference in hardness measurements between 80 and 1200 sandpaper using a portable hardness tester UCI method, the material applied in gas storage spheres composition ASTM 516 Gr 70. After determining the number of homogeneity, we performed the hardness profile to isolate the major factors influencing the hardness part: cold rolling and segregation of impurities. Factors Cooling and sanding were analyzed using the method of design of experiments (DOE), in which it was demonstrated that neither variables nor their interactions, has significant influence on the hardness measurements by portable MIC 10. This fact will lead to reduction in time and cost for surface preparation

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Produção Vegetal) - FCAV