Association between glycemic index and glycemic load and the risk of incident coronary heart disease among whites and African Americans with and without type 2 diabetes: The Atherosclerosis Risk in Communities study

Several studies have examined the association between high glycemic index (GI) and glycemic load (GL) diets and the risk for coronary heart disease (CHD). However, most of these studies were conducted primarily on white populations. The primary aim of this study was to examine whether high GI and GL diets are associated with increased risk for developing CHD in whites and African Americans, non-diabetics and diabetics, and within stratifications of body mass index (BMI) and hypertension (HTN). Baseline and 17-year follow-up data from ARIC (Atherosclerosis Risk in Communities) study was used. The study population (13,051) consisted of 74% whites, 26% African Americans, 89% non-diabetics, 11% diabetics, 43% male, 57% female aged 44 to 66 years at baseline. Data from the ARIC food frequency questionnaire at baseline were analyzed to provide GI and GL indices for each subject. Increases of 25 and 30 units for GI and GL respectively were used to describe relationships on incident CHD risk. Adjusted hazard ratios for propensity score with 95% confidence intervals (CI) were used to assess associations. During 17 years of follow-up (1987 to 2004), 1,683 cases of CHD was recorded. Glycemic index was associated with 2.12 fold (95% CI: 1.05, 4.30) increased incident CHD risk for all African Americans and GL was associated with 1.14 fold (95% CI: 1.04, 1.25) increased CHD risk for all whites. In addition, GL was also an important CHD risk factor for white non-diabetics (HR=1.59; 95% CI: 1.33, 1.90). Furthermore, within stratum of BMI 23.0 to 29.9 in non-diabetics, GI was associated with an increased hazard ratio of 11.99 (95% CI: 2.31, 62.18) for CHD in African Americans, and GL was associated with 1.23 fold (1.08, 1.39) increased CHD risk in whites. Body mass index modified the effect of GI and GL on CHD risk in all whites and white non-diabetics. For HTN, both systolic blood pressure and diastolic blood pressure modified the effect on GI and GL on CHD risk in all whites and African Americans, white and African American non-diabetics, and white diabetics. Further studies should examine other factors that could influence the effects of GI and GL on CHD risk, including dietary factors, physical activity, and diet-gene interactions. ^

Characterization of Staphylococcus aureus isolates associated with pediatric carriage in Houston, Texas

Infections caused by Methicillin-resistant Staphylococcus aureus (MRSA) have been of great concern in hospitals due the difficulty in treating virulent, antibiotic resistant microorganisms in sensitive populations including children, the elderly, and immunocomprimised individuals. Since the late 1990's, MRSA infections have become a problem in the general community, and the strains of S. aureus that cause infections in the community are known to be genetically different than the hospital acquired strains. Community-acquired strains tend to be more virulent, affecting even relatively healthy individuals, and disease presentation tends to be more diverse than diseases observed in patients suffering from hospital-acquired strains. From the year 2000 to the present, there has been a significant increase in community-acquired infections in children, a population already particularly sensitive to S. aureus infection. Genotyping the strains of CA-MRSA circulating in the pediatric population is an important step in developing better antibiotic treatment strategies. Additionally, determining the carriage status of individuals in this population and comparing these data with strain genotypes will also be valuable in establishing prevention and control practices. ^

Assessing pediatric nasal carriage of S. aureus & MRSA

Staphylococcus aureus and methicillin-resistant Staphylococcus aureus (MRSA) has become an increasing problem in the community. Nasal carriage of these bacteria has been shown to be a predisposing factor for infection and environmental contamination. This serious public health concern prompted an investigation to assess the pediatric nasal carriage of these bacteria in an effort to better understand the populations at risk and prevention of infection.^ This prospective study surveys 30 children from the Northwest Assistance Ministries (NAM) pediatric clinic from October 2008 to the present. Two nasal swabs were taken in 2-4 week intervals to determine S. aureus carrier status. Microbiologic tests were conducted to isolate and identify S. aureus from nasal cultures. Children with 2 cultures positive for S. aureus were classified as persistent carriers, those with 1 positive and 1 negative culture were classified as intermittent carriers, and those with 2 negative cultures were classified as noncarriers. This information was related to patient records and statistical analyses (X 2 and t-tests) were performed.^ Distribution of S. aureus carriage related to patient demographics (age, sex, & race) was showed no significant differences between S. aureus positive and S. aureus negative patient populations (p = 0.8). Additionally, the distribution of carrier status related to demographics also showed no significant difference (p = 0.8). Finally, the distribution of carrier status related to relevant medical history (immunizations current, past infection, & antibiotic use at time of swabbing) showed no significant difference (p = 0.4).^ This study is a snapshot of an ongoing study to assess the pediatric nasal carriage of S. aureus and MRSA. The inability to draw any reliable conclusion from the distribution of data is likely a result of an inadequate samples size. This is one of few studies assessing pediatric nasal carriage of S. aureus and targeting an underrepresented, Hispanic population is especially unique. Continuing this study allows for a better understanding of the epidemiology of this bacterium which will hopefully lead to appropriate interventions thus preventing future S. aureus infections.^

An evaluation of the Cypress Creek watershed for inorganic chemical load as it flows into Lake Houston

Background. The Cypress Creek is one of the main tributaries of Lake Houston, which provides drinking water to 21.4 million customers. Furthermore, the watershed is being utilized for contact and non-contact recreation, such as canoeing, swimming, hiking trail, and picnics. Water along the creek is impacted by numerous wastewater outfalls from both point and non-point sources. As the creek flows into Lake Houston, it carries both organic and inorganic contaminants that may affect the drinking water quality of this important water source reservoir. Objective. This study was carried out to evaluate the inorganic chemical load of the water in Cypress Creek along its entire length, from the headwaters in Waller County and up to the drainage into Lake Houston. The purpose was to determine whether there are hazardous concentrations of metals in the water and what would be the likely sources. Method. Samples were collected at 29 sites along the creek and analyzed for 29 metals, 17 of which were on the Environmental Protection Agency priority pollution list. Public access sites primarily at bridges were used for sample collection. Samples were transported on ice to the University Of Texas School Of Public Health laboratory, spiked with 2 ml HNO3 kept overnight in the refrigerator, and the following day transported to the EPA laboratory for analysis. Analysis was done by EPA Method 200.7-ICP, Method 200.8ICP/MS and Method 245.1-CVAAS. Results. Metals were present above the detection limits at 65% of sites. Concentrations of aluminum, iron, sodium, potassium, magnesium, and calcium, were particularly high at all sites. Aluminum, sodium, and iron concentrations greatly exceeded the EPA secondary drinking water standards at all sites. ^ Conclusion. The recreational water along Cypress Creek is impacted by wastewater from both permitted and non-permitted outfalls, which deposit inorganic substances into the water. Although a number of inorganic contaminants were present in the water, toxic metals regulated by the EPA were mostly below the recommended limits. However, high concentrations of aluminum, sodium, and iron in the Cypress Creek bring forward the issue of unauthorized discharges of salt water from mining, as well as industrial and domestic wastewater.^

Influence of Crop Load on Tree Growth, Yield, and Fruit Quality of Scab Resistant Apples at Harvest

Apple scab, caused by Venturia inaequalis, is a major disease affecting apple production. Breeding programs have developed over 30 releases of scab-resistant cultivars since 1970 with recent ones having much improved quality. Redfree and GoldRush are from a cooperative breeding program involving Purdue, Rutgers, and Illinois universities while Liberty was introduced from the Cornell University breeding program. For these cultivars to gain better acceptance, more information is needed on their cropping capacities and the effect of crop load on fruit quality attributes. Our study was conducted to determine the relationship between increasing crop load on tree growth, fruit size, and fruit quality variables of the three cultivars under Iowa conditions.

Prediction of bendig load capacity of timber beams by finite element method simulation of knots and grain deviation

A finite element model was used to simulate timberbeams with defects and predict their maximum load in bending. Taking into account the elastoplastic constitutive law of timber, the prediction of fracture load gives information about the mechanisms of timber failure, particularly with regard to the influence of knots, and their local graindeviation, on the fracture. A finite element model was constructed using the ANSYS element Plane42 in a plane stress 2D-analysis, which equates thickness to the width of the section to create a mesh which is as uniform as possible. Three sub-models reproduced the bending test according to UNE EN 408: i) timber with holes caused by knots; ii) timber with adherent knots which have structural continuity with the rest of the beam material; iii) timber with knots but with only partial contact between knot and beam which was artificially simulated by means of contact springs between the two materials. The model was validated using ten 45 × 145 × 3000 mm beams of Pinus sylvestris L. which presented knots and graindeviation. The fracture stress data obtained was compared with the results of numerical simulations, resulting in an adjustment error less of than 9.7%

Modelling Crowd Load for Floor Vibration Analysis

The dynamic floor loads induced by crowds in gymnasium or stadium structures are commonly modelled by superposition of the individual contributions using reduction factors for the different Fourier coefficients. These Fourier coefficients and the reduction factors are calculated using full scale measurements. Generally the testing is performed on platforms or structures that can be considered rigid, such that the natural frequencies are higher than the frequencies of the spectator movement. In this paper we shall present the testing done on a structure that used to be a gymnasium as well as the procedure used to identify its dynamic properties and a first evaluation of the socalled “group effect”.

Capacitive load based on IGBTs for on-site characterization of PV arrays

This paper describes the practical design of a portable capacitive load based on insulated gate bipolar transistors (IGBTs), which is used to measure the I–V characteristics of PV arrays with short-circuit currents up to 80 A and open circuit voltages up to 800 V. Such measurement allows on-site characterization of PV arrays under real operating conditions and also provides information for the detection of potential array anomalies, such as broken cells or defective connections. The presented I–V load is easy to reproduce and low-cost, characteristics that are within the reach of small-scale organizations involved in PV electrification projects.

Comparison of dynamic effects of high-speed traffic load on ballasted track using a simplified two-dimensional and full three-dimensional model.

The vertical dynamic actions transmitted by railway vehicles to the ballasted track infrastructure is evaluated taking into account models with different degree of detail. In particular, we have studied this matter from a two-dimensional (2D) finite element model to a fully coupled three-dimensional (3D) multi-body finite element model. The vehicle and track are coupled via a non-linear Hertz contact mechanism. The method of Lagrange multipliers is used for the contact constraint enforcement between wheel and rail. Distributed elevation irregularities are generated based on power spectral density (PSD) distributions which are taken into account for the interaction. The numerical simulations are performed in the time domain, using a direct integration method for solving the transient problem due to the contact nonlinearities. The results obtained include contact forces, forces transmitted to the infrastructure (sleeper) by railpads and envelopes of relevant results for several track irregularities and speed ranges. The main contribution of this work is to identify and discuss coincidences and differences between discrete 2D models and continuum 3D models, as wheel as assessing the validity of evaluating the dynamic loading on the track with simplified 2D models