Anatomical variations of the celiac trunk and hepatic arterial system: an analysis using multidetector computed tomography angiography

Abstract Objective: To analyze the prevalence of anatomical variations of celiac arterial trunk (CAT) branches and hepatic arterial system (HAS), as well as the CAT diameter, length and distance to the superior mesenteric artery. Materials and Methods: Retrospective, cross-sectional and predominantly descriptive study based on the analysis of multidetector computed tomography images of 60 patients. Results: The celiac trunk anatomy was normal in 90% of cases. Hepatosplenic trunk was found in 8.3% of patients, and hepatogastric trunk in 1.7%. Variation of the HAS was observed in 21.7% of cases, including anomalous location of the right hepatic artery in 8.3% of cases, and of the left hepatic artery, in 5%. Also, cases of joint relocation of right and left hepatic arteries, and trifurcation of the proper hepatic artery were observed, respectively, in 3 (5%) and 2 (3.3%) patients. Mean length and caliber of the CAT were 2.3 cm and 0.8 cm, respectively. Mean distance between CAT and superior mesenteric artery was 1.2 cm (standard deviation = 4.08). A significant correlation was observed between CAT diameter and length, and CAT diameter and distance to superior mesenteric artery. Conclusion: The pattern of CAT variations and diameter corroborate the majority of the literature data. However, this does not happen in relation to the HAS.

The Social Politics of Fatherhood in Spain and France: a Comparative Analysis of Parental Leave and Shared Residence

The Social Politics of Fatherhood in Spain and France: A Comparative Analysis of Parental Leave and Shared Residence The article provides a comparative analysis of policy developments on leaves for fathers and joint custody in Spain and France in the last decade. These two types of measures have been selected because they are both widely recognised as main instruments to promote new fathering styles and consequently more gender equality in the European Union. While the rhetoric of choice has been developed in both countries in relation to maternal employment and childcare, with better results in France than in Spain, it remains to be seen to what extent choice will also be extended to fathers. Keywords: Fatherhood. Family. Comparative social policy. Parental leave. Joint custody.

Choosing hybrid organizations for local services delivery : An empirical analysis of partial privatization

The empirical literature about factors explaining local government delivery choices has traditionally focused the attention on the public or private production dilemma. However, hybrid organizational forms such as mixed public-private firms are increasingly used in several European countries. This paper makes use of survey data from Spanish municipalities to examine motivations of local governments for engaging in hybrid organizational forms. Data refer to two very relevant local services: water distribution and solid waste collection. The empirical analysis indicates that the use of mixed firms emerge as a type of pragmatically based ‘third way’ between pure public and pure private production. Indeed, local governments make use of mixed firms when cost considerations (scale economies, transaction costs and soon), financial constraints and private interests exert contradictory pressures. On the contrary, political and ideological factors do not play any significant role on the local government decision of engaging or not in joint ventures with private partners.

Panel Data Stochastic Convergence Analysis of the Mexican Regions

The stochastic convergence amongst Mexican Federal entities is analyzed in panel data framework. The joint consideration of cross-section dependence and multiple structural breaks is required to ensure that the statistical inference is based on statistics with good statistical properties. Once these features are accounted for, evidence in favour of stochastic convergence is found. Since stochastic convergence is a necessary, yet insufficient condition for convergence as predicted by economic growth models, the paper also investigates whether-convergence process has taken place. We found that the Mexican states have followed either heterogeneous convergence patterns or divergence process throughout the analyzed period.

Computational Techniques for Spectral Image Analysis

Multispectral images are becoming more common in the field of remote sensing, computer vision, and industrial applications. Due to the high accuracy of the multispectral information, it can be used as an important quality factor in the inspection of industrial products. Recently, the development on multispectral imaging systems and the computational analysis on the multispectral images have been the focus of a growing interest. In this thesis, three areas of multispectral image analysis are considered. First, a method for analyzing multispectral textured images was developed. The method is based on a spectral cooccurrence matrix, which contains information of the joint distribution of spectral classes in a spectral domain. Next, a procedure for estimating the illumination spectrum of the color images was developed. Proposed method can be used, for example, in color constancy, color correction, and in the content based search from color image databases. Finally, color filters for the optical pattern recognition were designed, and a prototype of a spectral vision system was constructed. The spectral vision system can be used to acquire a low dimensional component image set for the two dimensional spectral image reconstruction. The data obtained by the spectral vision system is small and therefore convenient for storing and transmitting a spectral image.

Virulence and rep-PCR analysis of Pyricularia grisea isolates from two Brazilian upland rice cultivars

The phenotypic and genetic diversity of 77 isolates of Pyricularia grisea collected from two upland rice cultivars, Maravilha and Primavera, was studied. Isolates exhibiting compatible reaction to cv.Primavera were incompatible to cv.Maravilha and vice versa, with the exception of six isolates that were compatible to both cultivars. The virulence of isolates from cv. Maravilha on 32 test genotypes of rice was significantly higher (t = 9.09, p < 0.0001) than the isolates from cv.Primavera. A phenogram constructed from virulence data showed two main groups, one constituted mainly of isolates from cv.Primavera (97.6%) and the other of isolates from cv.Maravilha (91.17%). Rep-PCR analysis of isolates using two primers designed from sequences of Pot2 showed that isolates could be clustered broadly into two groups. The average similarity within a cluster of isolates from cv.Primavera was significantly greater than the average similarity among the isolates of cv.Maravilha (t = 5.37, p < 0.0001). There was close correspondence between clusters based on PCR and virulence data (r = 0.48, p < 0.011). The results showed that isolates of P. grisea were cultivar specific and had low phenotypic and genetic diversity.

Developing co-operation of business units – exploring synergies and a joint business model

The purpose of this study was to develop co-operation between business units of the company operating in graphic industry. The development was done by searching synergy opportunities between these business units. The final aim was to form a business model, which is based on co-operation of these business units.The literature review of this thesis examines synergies and especially the process concerning the search and implementation of synergies. Also the concept of business model and its components are examined. The research was done by using qualitative research method. The main data acquiring method to the empirical part was theme interviews. The data was analyzed using thematisation and content analysis.The results of the study include seven identified possible synergies and a business model, which is based on the co-operation of the business units. The synergy opportunities are evaluated and the implementation order of the synergies is suggested. The presented synergies create the base for the proposed business model.

COMPARISON BETWEEN WOOD DRYING DEFECT SCORES: SPECIMEN TESTING X ANALYSIS OF KILN-DRIED BOARDS

It is important to develop drying technologies for Eucalyptus grandis lumber, which is one of the most planted species of this genus in Brazil and plays an important role as raw material for the wood industry. The general aim of this work was to assess the conventional kiln drying of juvenile wood of three clones of Eucalyptus grandis. The specific aims were to compare the behavior between: i) drying defects indicated by tests with wood specimens and conventional kiln-dried boards; and ii) physical properties and the drying quality. Five 11-year-old trees of each clone were felled, and only flatsawn boards of the first log were used. Basic density and total shrinkage were determined, and the drying test with wood specimens at 100 °C was carried out. Kiln drying of boards was performed, and initial and final moisture content, moisture gradient in thickness, drying stresses and drying defects were assessed. The defect scoring method was used to verify the behavior between the defects detected by specimen testing and the defects detected in kiln-dried boards. As main results, the drying schedule was too severe for the wood, resulting in a high level of boards with defects. The behavior between the defects in the drying test with specimens and the defects of kiln-dried boards was different, there was no correspondence, according to the defect scoring method.

Accuracy Analysis of Frequency Converter Estimates in Diagnostic Applications

Transportation of fluids is one of the most common and energy intensive processes in the industrial and HVAC sectors. Pumping systems are frequently subject to engineering malpractice when dimensioned, which can lead to poor operational efficiency. Moreover, pump monitoring requires dedicated measuring equipment, which imply costly investments. Inefficient pump operation and improper maintenance can increase energy costs substantially and even lead to pump failure. A centrifugal pump is commonly driven by an induction motor. Driving the induction motor with a frequency converter can diminish energy consumption in pump drives and provide better control of a process. In addition, induction machine signals can also be estimated by modern frequency converters, dispensing with the use of sensors. If the estimates are accurate enough, a pump can be modelled and integrated into the frequency converter control scheme. This can open the possibility of joint motor and pump monitoring and diagnostics, thereby allowing the detection of reliability-reducing operating states that can lead to additional maintenance costs. The goal of this work is to study the accuracy of rotational speed, torque and shaft power estimates calculated by a frequency converter. Laboratory tests were performed in order to observe estimate behaviour in both steady-state and transient operation. An induction machine driven by a vector-controlled frequency converter, coupled with another induction machine acting as load was used in the tests. The estimated quantities were obtained through the frequency converter’s Trend Recorder software. A high-precision, HBM T12 torque-speed transducer was used to measure the actual values of the aforementioned variables. The effect of the flux optimization energy saving feature on the estimate quality was also studied. A processing function was developed in MATLAB for comparison of the obtained data. The obtained results confirm the suitability of this particular converter to provide accurate enough estimates for pumping applications.

Experimental Vibration Characteristics of a Beam with Nonlinear Support Using Receptance Coupling Analysis

This paper applies the Multi-Harmonic Nonlinear Receptance Coupling Approach (MUHANORCA) (Ferreira 1998) to evaluate the frequency response characteristics of a beam which is clamped at one end and supported at the other end by a nonlinear cubic stiffness joint. In order to apply the substructure coupling technique, the problem was characterised by coupling a clamped linear beam with a nonlinear cubic stiffness joint. The experimental results were obtained by a sinusoidal excitation with a special force control algorithm where the level of the fundamental force is kept constant and the level of the harmonics is kept zero for all the frequencies measured.

Target audience analysis in cyber domain

This thesis aims to find an effective way of conducting a target audience analysis (TAA) in cyber domain. There are two main focal points that are addressed; the nature of the cyber domain and the method of the TAA. Of the cyber domain the object is to find the opportunities, restrictions and caveats that result from its digital and temporal nature. This is the environment in which the TAA method is examined in this study. As the TAA is an important step of any psychological operation and critical to its success, the method used must cover all the main aspects affecting the choice of a proper target audience. The first part of the research was done by sending an open-ended questionnaire to operators in the field of information warfare both in Finland and abroad. As the results were inconclusive, the research was completed by assessing the applicability of United States Army Joint Publication FM 3-05.301 in the cyber domain via a theory-based content analysis. FM 3- 05.301 was chosen because it presents a complete method of the TAA process. The findings were tested against the results of the questionnaire and new scientific research in the field of psychology. The cyber domain was found to be “fast and vast”, volatile and uncontrollable. Although governed by laws to some extent, the cyber domain is unpredictable by nature and not controllable to reasonable amount. The anonymity and lack of verification often present in the digital channels mean that anyone can have an opinion, and any message sent may change or even be counterproductive to the original purpose. The TAA method of the FM 3-05.301 is applicable in the cyber domain, although some parts of the method are outdated and thus suggested to be updated if used in that environment. The target audience categories of step two of the process were replaced by new groups that exist in the digital environment. The accessibility assessment (step eight) was also redefined, as in the digital media the mere existence of a written text is typically not enough to convey the intended message to the target audience. The scientific studies made in computer sciences and both in psychology and sociology about the behavior of people in social media (and overall in cyber domain) call for a more extensive remake of the TAA process. This falls, however, out of the scope of this work. It is thus suggested that further research should be carried out in search of computer-assisted methods and a more thorough TAA process, utilizing the latest discoveries of human behavior. ---------------------------------------------------------------------------------------------------------------------------------- Tämän opinnäytetyön tavoitteena on löytää tehokas tapa kohdeyleisöanalyysin tekemiseksi kybertoimintaympäristössä. Työssä keskitytään kahteen ilmiöön: kybertoimintaympäristön luonteeseen ja kohdeyleisöanalyysin metodiin. Kybertoimintaympäristön osalta tavoitteena on löytää sen digitaalisesta ja ajallisesta luonteesta juontuvat mahdollisuudet, rajoitteet ja sudenkuopat. Tämä on se ympäristö jossa kohdeyleisöanalyysiä tarkastellaan tässä työssä. Koska kohdeyleisöanalyysi kuuluu olennaisena osana jokaiseen psykologiseen operaatioon ja on onnistumisen kannalta kriittinen tekijä, käytettävän metodin tulee pitää sisällään kaikki oikean kohdeyleisön valinnan kannalta merkittävät osa-alueet. Tutkimuksen ensimmäisessä vaiheessa lähetettiin avoin kysely informaatiosodankäynnin ammattilaisille Suomessa ja ulkomailla. Koska kyselyn tulokset eivät olleet riittäviä johtopäätösten tekemiseksi, tutkimusta jatkettiin tarkastelemalla Yhdysvaltojen armeijan kenttäohjesäännön FM 3-05.301 soveltuvuutta kybertoimintaympäristössä käytettäväksi teorialähtöisen sisällönanalyysin avulla. FM 3-05.301 valittiin koska se sisältää kokonaisvaltaisen kohdeyleisöanalyysiprosessin. Havaintoja verrattiin kyselytutkimuksen tuloksiin ja psykologian uusiin tutkimuksiin. Kybertoimintaympäristö on tulosten perusteella nopea ja valtava, jatkuvasti muuttuva ja kontrolloimaton. Vaikkakin lait hallitsevat kybertoimintaympäristöä jossakin määrin, on se silti luonteeltaan ennakoimaton eikä sitä voida luotettavasti hallita. Digitaalisilla kanavilla usein läsnäoleva nimettömyys ja tiedon tarkastamisen mahdottomuus tarkoittavat että kenellä tahansa voi olla mielipide asioista, ja mikä tahansa viesti voi muuttua, jopa alkuperäiseen tarkoitukseen nähden vastakkaiseksi. FM 3-05.301:n metodi toimii kybertoimintaympäristössä, vaikkakin jotkin osa-alueet ovat vanhentuneita ja siksi ne esitetään päivitettäväksi mikäli metodia käytetään kyseisessä ympäristössä. Kohdan kaksi kohdeyleisökategoriat korvattiin uusilla, digitaalisessa ympäristössä esiintyvillä ryhmillä. Lähestyttävyyden arviointi (kohta 8) muotoiltiin myös uudestaan, koska digitaalisessa mediassa pelkkä tekstin läsnäolo ei sellaisenaan tyypillisesti vielä riitä halutun viestin välittämiseen kohdeyleisölle. Tietotekniikan edistyminen ja psykologian sekä sosiologian aloilla tehty tieteellinen tutkimus ihmisten käyttäytymisestä sosiaalisessa mediassa (ja yleensä kybertoimintaympäristössä) mahdollistavat koko kohdeyleisöanalyysiprosessin uudelleenrakentamisen. Tässä työssä sitä kuitenkaan ei voida tehdä. Siksi esitetäänkin että lisätutkimusta tulisi tehdä sekä tietokoneavusteisten prosessien että vielä syvällisempien kohdeyleisöanalyysien osalta, käyttäen hyväksi viimeisimpiä ihmisen käyttäytymiseen liittyviä tutkimustuloksia.

The effect of a low dose of clenbuterol on rat soleus muscle submitted to joint immobilization

The aim of the present study was to evaluate the effect of joint immobilization on morphometric parameters and glycogen content of soleus muscle treated with clenbuterol. Male Wistar (3-4 months old) rats were divided into 4 groups (N = 6 for each group): control, clenbuterol, immobilized, and immobilized treated with clenbuterol. Immobilization was performed with acrylic resin orthoses and 10 µg/kg body weight clenbuterol was administered subcutaneously for 7 days. The following parameters were measured the next day on soleus muscle: weight, glycogen content, cross-sectional area, and connective tissue content. The clenbuterol group showed an increase in glycogen (81.6%, 0.38 ± 0.09 vs 0.69 ± 0.06 mg/100 g; P < 0.05) without alteration in weight, cross-sectional area or connective tissue compared with the control group. The immobilized group showed a reduction in muscle weight (34.2%, 123.5 ± 5.3 vs 81.3 ± 4.6 mg; P < 0.05), glycogen content (31.6%, 0.38 ± 0.09 vs 0.26 ± 0.05 mg/100 mg; P < 0.05) and cross-sectional area (44.1%, 2574.9 ± 560.2 vs 1438.1 ± 352.2 µm²; P < 0.05) and an increase in connective tissue (216.5%, 8.82 ± 3.55 vs 27.92 ± 5.36%; P < 0.05). However, the immobilized + clenbuterol group showed an increase in weight (15.9%; 81.3 ± 4.6 vs 94.2 ± 4.3 mg; P < 0.05), glycogen content (92.3%, 0.26 ± 0.05 vs 0.50 ± 0.17 mg/100 mg; P < 0.05), and cross-sectional area (19.9%, 1438.1 ± 352.2 vs 1724.8 ± 365.5 µm²; P < 0.05) and a reduction in connective tissue (52.2%, 27.92 ± 5.36 vs 13.34 ± 6.86%; P < 0.05). Statistical analysis was performed using Kolmogorov-Smirnov and homoscedasticity tests. For the muscle weight and muscle glycogen content, two-way ANOVA and the Tukey test were used. For the cross-sectional area and connective tissue content, Kruskal-Wallis and Tukey tests were used. This study emphasizes the importance of anabolic pharmacological protection during immobilization to minimize skeletal muscle alterations resulting from disuse.

Three-dimensional kinematic analysis of upper and lower limb motion during gait of post-stroke patients

The aim of this study was to analyze the alterations of arm and leg movements of patients during stroke gait. Joint angles of upper and lower limbs and spatiotemporal variables were evaluated in two groups: hemiparetic group (HG, 14 hemiparetic men, 53 ± 10 years) and control group (CG, 7 able-bodied men, 50 ± 4 years). The statistical analysis was based on the following comparisons (P ≤ 0.05): 1) right versus left sides of CG; 2) affected (AF) versus unaffected (UF) sides of HG; 3) CG versus both the affected and unaffected sides of HG, and 4) an intracycle comparison of the kinematic continuous angular variables between HG and CG. This study showed that the affected upper limb motion in stroke gait was characterized by a decreased range of motion of the glenohumeral (HG: 6.3 ± 4.5, CG: 20.1 ± 8.2) and elbow joints (AF: 8.4 ± 4.4, UF: 15.6 ± 7.6) on the sagittal plane and elbow joint flexion throughout the cycle (AF: 68.2 ± 0.4, CG: 46.8 ± 2.7). The glenohumeral joint presented a higher abduction angle (AF: 14.2 ± 1.6, CG: 11.5 ± 4.0) and a lower external rotation throughout the cycle (AF: 4.6 ± 1.2, CG: 22.0 ± 3.0). The lower limbs showed typical alterations of the stroke gait patterns. Thus, the changes in upper and lower limb motion of stroke gait were identified. The description of upper limb motion in stroke gait is new and complements gait analysis.

Effects of immobilization and remobilization on the ankle joint in Wistar rats

A sprained ankle is a common musculoskeletal sports injury and it is often treated by immobilization of the joint. Despite the beneficial effects of this therapeutic measure, the high prevalence of residual symptoms affects the quality of life, and remobilization of the joint can reverse this situation. The aim of this study was to analyze the effects of immobilization and remobilization on the ankle joint of Wistar rats. Eighteen male rats had their right hindlimb immobilized for 15 days, and were divided into the following groups: G1, immobilized; G2, remobilized freely for 14 days; and G3, remobilized by swimming and jumping in water for 14 days, performed on alternate days, with progression of time and a series of exercises. The contralateral limb was the control. After the experimental period, the ankle joints were processed for microscopic analysis. Histomorphometry did not show any significant differences between the control and immobilized/remobilized groups and members, in terms of number of chondrocytes and thickness of the articular cartilage of the tibia and talus. Morphological analysis of animals from G1 showed significant degenerative lesions in the talus, such as exposure of the subchondral bone, flocculation, and cracks between the anterior and mid-regions of the articular cartilage and the synovial membrane. Remobilization by therapeutic exercise in water led to recovery in the articular cartilage and synovial membrane of the ankle joint when compared with free remobilization, and it was shown to be an effective therapeutic measure in the recovery of the ankle joint.

The best practices in the formation phase of Sino-Finnish joint ventures in China: For Finnish software companies

This study discusses the formation phase of Chinese-Finnish joint ventures in China. The purpose of this thesis is to create best practices for Finnish software companies in forming a joint venture with a local Chinese company in China. Therefore, the main research question, in what are the best practices for forming Sino-Finnish joint ventures in China for Finnish software firms, is examined through four different themes within the joint venture formation phase; the motives, the partner se- lection, the choice of a joint venture type and joint venture negotiations. The theoretical background of the study consists of literature relating to the establishment process of Sino-Western joint ventures in China. The empirical research conducted for this study is based on the expert interviews. The empirical data was gathered via nine semi-structured interviews with both Chinese and Finnish experts in software and technology industry, who have experience or knowledge in establishing Sino-Finnish joint ventures in China. Thematic analysis was used to cat- egorize and interpret the interview data. In addition, a thematic network was built to act as a basis of the analysis. According to the main findings, the main motives for Finnish software companies to establish a joint venture in China are lack of skills or experience, little resources to enter on their own, and China’s large market. The main motives for Chinese companies are to gain new technology or man- agerial skills, and expand internationally. The intellectual property rights (IPR) have recently im- proved a lot in China, but the Finnish companies’ knowledge on IPR is inadequate. The Finnish software companies should conduct a market and industry research in order to understand their po- sition in the market and to find a suitable location and potential joint venture partners. It is essential to define partner selection criteria and partner attributes. In addition, it is important to build the joint venture around complementary motives and a win-win situation between the joint venture partners. The Finnish companies should be prepared that the joint venture negotiations will be challenging and they will take a long time. The challenges can be overcome by gaining understanding about the Chinese culture and business environment. The findings of this study enhance understanding of the joint venture formation phase in China. This study provides guidelines for Finnish software companies to establish a joint venture in China. In addition, this study brings new insights to the Sino-Western joint venture literature with its soft- ware industry context. Future research is, however, necessary in order to gain an understanding of the advantages and disadvantages of a joint venture as an entry mode into China for Finnish soft- ware companies