In vitro characterization of coevaporates containing chitosan for colonic drug delivery

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Semipreparative enantioseparation of methamidophos by HPLC-UV and preliminary in vitro study of butyrylcholinesterase inhibition

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The Styracaceae

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação clínica da relação entre o índice de placa, índice gengival, alinhamento dental, mucosa ceratinizada, tipo de periodonto e distúrbios oclusais com a ocorrência de recessão gengival

This study clinically evaluated the relationship of gingival recessions with the periodontal index of gingival and plaque, dental alignment, keratinized mocous, type of periodontal, and occlusal disorders. Study participants were individuals aged between 19 and 33 years. The evaluations were performed by using questionnaires and clinical examinations. In subjects examined, the teeth were assessed and divided into groups (Molars, premolars, canines and incisors). The gingival recession were measured in the central region of the teeth and individuals were subject to disclosure to the plate and observing the poll of plaque and gingival index, respectively. 558 teeth were examined, with 24.1%, 135 had gingival recession greater than or equal to 1mm. Through the combination of tests used to evaluate the average of the recession and its relationship with the variables studied, we observed that the degree of recession of the elements assessed dental showed, almost for the most part, when higher values associated with the index plaque (p = 0.101), Gingival Index (p = 0.053), dental alignment (p = 0.962), width of keratinized mocous (p = 0.004) and type of periodontium (p = 0.033), however statistically significant difference could only be considered when related the recessions in the keratinized mocous and the type of the periodontium. Although we identify, when we evaluate the whole set of teeth that occlusal disturbances (p = 0.002) were more strongly associated with cases of gum recession that the gingival index (p = 0.006), however, these two conditions were correlated with the cases of recession, contributing to its occurrence

Expressão Imuno-histoquímica de COX-2, EMMPRIN, HIF-1α e GLUT-1 no tecido gengival normal e inflamado

The aim of this study was determine whether an association exists in the gum tissue between the expression of markers of tissue hypoxia (HIF-1α and GLUT-1) with a marker of inflammatory activity (COX-2) and a marker of collagen degradation (EMMPRIN). Was performed immunohistochemistry with antibodies specific for these markers on 60 samples of gingival tissue divided into two groups: gums (n = 26) and gingivitis (n = 34) and expression was analyzed in the epithelial tissue and connective tissue . The reactivity epithelial for COX-2 was observed in only two cases as the HIF-1α, GLUT-1 and EMMPRIN was strongly expressed in the epithelial basal layer and the immunostaining was gradually decreased as the cells away from this layer, and negative in the region suprabasal in most specimens. In connective tissue, and HIF-1α EMMPRIN were strongly positive for most cases analyzed as GLUT-1 was negative in most cases. Immunostaining for COX-2 showed an association with gingival inflammatory infiltrate. The expression of EMMPRIN, HIF-1α and GLUT-1 in normal gums confirms the physiological role of these markers, however there was no association with tissue inflammation. Given the findings we can conclude that the inflammatory changes installed in frames of chronic gingivitis may not be sufficient to activate the factors of hypoxia to levels that can be quantified by immunohistochemical analysis, in addition, the findings are not conclusive in relationship to involvement of EMMPRIN in the secretion of MMPs to degrade collagen in the frames of gingivitis. We suggest the use of technical analysis and quantification of RNA of EMMPRIN and MMPs in order to determine whether collagen degradation observed in gingivitis suffers or not, significant influence of EMMPRIN for secretion and activation of MMPs

Optimization of acid hydrolysis from the hemicellulosic fraction of Eucalyptus grandis residue using response surface methodology

Biotechnological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide fraction into monomeric sugars. Hydrolysis can be performed enzymatically and with dilute or concentrate mineral acids. The present study used dilute sulfuric acid as a catalyst for hydrolysis of Eucalyptus grandis residue. The purpose of this paper was to optimize the hydrolysis process in a 1.41 pilot-scale reactor and investigate the effects of the acid concentration, temperature and residue/acid solution ratio on the hemicellulose removal and consequently on the production of sugars (xylose, glucose and arabinose) as well as on the formation of by-products (furfural, 5-hydroxymethylfurfural and acetic acid). This study was based on a model composition corresponding to a 2 3 orthogonal factorial design and employed the response surface methodology (RSM) to optimize the hydrolysis conditions, aiming to attain maximum xylose extraction from hemicellulose of residue. The considered optimum conditions were: H2SO4 concentration of 0.65%, temperature of 157 degrees C and residue/acid solution ratio of 1/8.6 with a reaction time of 20 min. Under these conditions, 79.6% of the total xylose was removed and the hydrolysate contained 1.65 g/l glucose, 13.65 g/l xylose, 1.55 g/l arabinose, 3.10 g/l acetic acid, 1.23 g/l furfural and 0.20 g/l 5-hydroxymethylfurfural. (c) 2006 Published by Elsevier Ltd.

Padrão de atividades do sagüi callithrix jacchus numa área de caatinga

Callithrix jacchus, as the other species in the family Callitrichidae, lives in social groups. The groups cam be found in different habitats, whose distinct floristic physiognomies and communities are intrinsically related to their behavioral ecology and social relations. Our objective was to describe the social relations and feeding behavior of Callithrix jacchus in the Bioma Caatinga. We observed a group at the FLONA (National Forest IBAMA), in Açu-RN, in northeastern Brazil, compose of five adults (2 females and 3 males) at the beginning of the study. The birth of five animals was registered along the study. The following behavioral categories were registered along eleven months, once a week, through instantaneous focal animal sampling: social grooming, contact, proximity, foraging, feeding, locomotion and rest. Foraging presented the highest levels comparing to other activities, and was more frequent in the dry season. Social grooming was the second more frequent activity, with higher levels in the rainy season, and between the reproductive couple. We found similar results for proximity. The most explored feeding item was the gum, specially in the rainy season. The most explored species for exudates feeding were Cirus limon (limão) and Pitecolobiun foliolosum (jurema branca). The comparision of fruit and insect ingestion between the seasons showed higher percentage for both in the dry season. The general activity pattern was similar to what is registeded in groups the inhabit the Atlantic Forest. These results indicate the flexibility of the species which survives and reproduces in such physically and biologically different environments

Partículas inteligentes de poli (nisopropilacrilamida), quitosana e poli (ácido acrílico): efeito da temperatura e do pH sobre suas propriedades em suspensões aquosas

The present study describes the stability and rheological behavior of suspensions of poly (N-isopropylacrylamide) (PNIPAM), poly (N-isopropylacrylamide)-chitosan (PNIPAMCS), and poly (N-isopropylacrylamide)-chitosan-poly (acrylic acid) (PNIPAM-CS-PAA) crosslinked particles sensitive to pH and temperature. These dual-sensitive materials were simply obtained by one-pot method, via free-radical precipitation copolymerization with potassium persulfate, using N,N -methylenebisacrylamide (MBA) as a crosslinking agent. Incorporation of the precursor materials into the chemical networks was confirmed by elementary analysis and infrared spectroscopy. The influence of external stimuli such as pH and temperature, or both, on particle behavior was investigated through rheological measurements, visual stability tests and analytical centrifugation. The PNIPAM-CS particles showed higher stability in acid and neutral media, whereas PNIPAM-CS-PAA particles were more stable in neutral and alkaline media, both below and above the LCST of poly (Nisopropylacrylamide) (stability data). This is due to different interparticle interactions, as well as those between the particles and the medium (also evidenced by rheological data), which were also influenced by the pH and temperature of the medium. Based on the results obtained, we found that the introduction of pH-sensitive polymers to crosslinked poly (Nisopropylacrylamide) particles not only produced dual-sensitive materials, but allowed particle stability to be adjusted, making phase separation faster or slower, depending on the desired application. Thus, it is possible to adapt the material to different media

Bioprospecção química da esponja callyspongia vaginalis (Callyspongiidae)

Recently, marine organisms have attracted attention because of the complexity and potent biological activity from your secondary metabolites. Our planet has 80% it surface covered by oceans and seas, therefore, housing a wide number of different forms of life, among them, the sponges. These sessile and filtrating animals, according to numerous researches, come showing like true chemistry factories. The substances from these animals, sometimes show as news targets to therapeutics agents, and some countries has already use them for treatment of some diseases. Further of the secondary metabolites, the polysaccharides of marine origin also have been target of studies, because the presence of the sulfates groups in its molecules. Polysaccharides with differents biological activities have been related in a large number of researches. Actually, many studies show the sponges as source of promising medicine. These studies inspire new researches, because the few number of sponges species studied until now. Because of that, the present work shows the chemistry prospection of the sponge Callyspongia vaginalis. Chromatographic methods in silica gel allowed the isolations of two secondary metabolites: the known β- sitosterol and a ceramide, no reported in the genus Callyspongia, previously. The analysis of the their lipid extracts show different kinds of fatty acids with a variety of chain length (saponifiable fraction), and others metabolites like Lupenone and stigmasterol, also unprecedented in the genus. The Polysaccharide characterization and the elucidation of the secondary metabolites acquired through of chromatography analysis (CC, molecular exclusion) and spectrometric (NMR 1H and 13C, mass, IR), respectively and comparison with literature data

Obtenção de polímeros graftizados de quitosana e estudo das propriedades físico-químicas para aplicação na indústria do petróleo

Chitosan is a biopolymer derived from the shells of crustaceans, biodegradable, inexpensive and renewable with important physical and chemical properties. Moreover, the different modifications possible in its chemical structure generate new properties, making it an attractive polysaccharide owing to its range of potential applications. Polymers have been used in oil production operations. However, growing concern over environmental constraints has prompted oil industry to search for environmentally sustainable materials. As such, this study sought to obtain chitosan derivatives grafted with hydrophilic (poly(ethylene glycol), mPEG) and/or hydrophobic groups (n-dodecyl) via a simple (one-pot) method and evaluate their physicochemical properties as a function of varying pH using rheology, small-angle Xray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. The chitosan derivatives were prepared using reductive alkylation under mild reaction conditions and the chemical structure of the polymers was characterized by nuclear magnetic resonance (1H NMR) and CHN elemental analysis. Considering a constant mPEG/Chitosan molar ratio on modification of chitosan, the solubility of the polymer across a wide pH range (acidic, neutral and basic) could only be improved when some of the amino groups were submitted to reacetylation using the one-pot method. Under these conditions, solubility is maintained even with the simultaneous insertion of n-dodecyl. On the other hand, the solubility of derivatives obtained only through mPEG incorporation using the traditional methodology, or with the ndodecyl group, was similar to that of its precursor. The hydrophilic group promoted decreased viscosity of the polymer solutions at 10 g/L in acid medium. However, at basic pH, both viscosity and thermal stability increased, as well as exhibited a pronounced pseudoplastic behavior, suggesting strong intermolecular associations in the alkaline medium. The SAXS results showed a polyelectrolyte behavior with the decrease in pH for the polymer systems. DLS analyses revealed that although the dilute polymer solutions at 1 g/L and pH 3 exhibited a high density of protonated amino groups along the polymer chain, the high degree of charge contributed significantly to aggregation, promoting increased particle size with the decrease in pH. Furthermore, the hydrophobic group also contributed to increasing the size of aggregates in solution at pH 3, whereas the hydrophilic group helped reduce their size across the entire pH range. Nevertheless, the nature of aggregation was dependent on the pH of the medium. Zeta potential results indicated that its values do not depend solely on the surface charge of the particle, but are also dependent on the net charge of the medium. In this study, water soluble associative polymers exhibit properties that can be of great interest in the petroleum industry

Avaliação das propriedades físico-químicas de sistemas a base de carboximetilcelulose e poli (N-isopropilacrilamida) em soluções aquosas para aplicação na indústria do petróleo

Sustainable development is a major challenge in the oil industry and has aroused growing interest in research to obtain materials from renewable sources. Carboxymethylcellulose (CMC) is a polysaccharide derived from cellulose and becomes attractive because it is water-soluble, renewable, biodegradable and inexpensive, as well as may be chemically modified to gain new properties. Among the derivatives of carboxymethylcellulose, systems have been developed to induce stimuli-responsive properties and extend the applicability of multiple-responsive materials. Although these new materials have been the subject of study, understanding of their physicochemical properties, such as viscosity, solubility and particle size as a function of pH and temperature, is still very limited. This study describes systems of physical blends and copolymers based on carboxymethylcellulose and poly (N-isopropylacrylamide) (PNIPAM), with different feed percentage compositions of the reaction (25CMC, 50CMC e 75CMC), in aqueous solution. The chemical structure of the polymers was investigated by infrared and CHN elementary analysis. The physical blends were analyzed by rheology and the copolymers by UV-visible spectroscopy, small-angle X-ray scattering (SAXS), dynamic light scattering (DLS) and zeta potential. CMC and copolymer were assessed as scale inhibitors of calcium carbonate (CaCO3) using dynamic tube blocking tests and chemical compatibility tests, as well as scanning electron microscopy (SEM). Thermothickening behavior was observed for the 50 % CMC_50 % PNIPAM and 25 % CMC_75 % PNIPAM physical blends in aqueous solution at concentrations of 6 and 2 g/L, respectively, depending on polymer concentration and composition. For the copolymers, the increase in temperature and amount of PNIPAM favored polymer-polymer interactions through hydrophobic groups, resulting in increased turbidity of polymer solutions. Particle size decreased with the rise in copolymer PNIPAM content as a function of pH (3-12), at 25 °C. Larger amounts of CMC result in a stronger effect of pH on particle size, indicating pH-responsive behavior. Thus, 25CMC was not affected by the change in pH, exhibiting similar behavior to PNIPAM. In addition, the presence of acidic or basic additives influenced particle size, which was smaller in the presence of the additives than in distilled water. The results of zeta potential also showed greater variation for polymers in distilled water than in the presence of acids and bases. The lower critical solution temperature (LCST) of PNIPAM determined by DLS corroborated the value obtained by UV-visible spectroscopy. SAXS data for PNIPAM and 50CMC indicated phase transition when the temperature increased from 32 to 34 °C. A reduction in or absence of electrostatic properties was observed as a function of increased PNIPAM in copolymer composition. Assessment of samples as scale inhibitors showed that CMC performed better than the copolymers. This was attributed to the higher charge density present in CMC. The SEM micrographs confirmed morphological changes in the CaCO3 crystals, demonstrating the scale inhibiting potential of these polymers

Influência das condições de saúde bucal no desempenho das atividades diárias de adolescentes escolares

Instruments are used in odontology to measure the Quality of Life Related to Oral Health (OHRQoL) to scale how the oral condition interferes with functional areas, of the people s psychological and social life. This cross-sectional study, held in Natal/RN, with 215 students from the Federal Institute of Education, Science and Technology of Rio Grande do Norte (IFRN) has investigated the association between the performance of daily activities and oral health status of school adolescents from 15 to 19 years of age, through the normative index DMFT (permanent teeth decayed, missing and filled), CPI (Community Periodontal Index) and DAI (dental Aesthetic Index) and subjective questionnaire assessment of quality of life related oral health OIDP index (oral impacts on daily performance). It was also carried out the socioeconomic characteristics of students through IFRN own data. Concerning the analysis of data was performed a descriptive analysis of the variables by their absolute and relative frequencies and measures of central tendency. The chi-square test was used to assess the association between the dependent variable and the independent categorical variables and the Student t test for quantitative. It was also conducted a further multiple analysis out using Poisson regression with robust variance between the outcome "presence of impact" and the independent variables that showed p <0.20. It was used for all the statistical tests a significance level of 5%. Among the adolescents surveyed, 51.16% reported that at least one activity assessed by OIDP had hampered its implementation due to some dental problem. The difficulties were more pronounced in the activities of eating (31.6%), oral hygiene (25.6%) and smile (25.1%).The tooth position, followed by toothache, were the causes of the impacts reported by most teenagers. There was a significant association between the presence and impact of the presence of one or more decayed teeth (p = 0.012), the presence of gum bleeding (p = 0.012) and for orthodontic treatment (p = 0.003), independently of other variables. There was no significant association between oral health status and socioeconomic and demographic characteristics of the adolescents. The survey results showed that there is an association between oral health status of the population studied and reports of difficulties in carrying out daily activities evaluated. The worse the oral health status, the greater the impact of this condition on the adolescents quality of life

Screening and Production Study of Microbial Xylanase Producers from Brazilian Cerrado

Hemicelluloses are polysaccharides of low molecular weight containing 100 to 200 glycosidic residues. In plants, the xylans or the hemicelluloses are situated between the lignin and the collection of cellulose fibers underneath. The xylan is the most common hemicellulosic polysaccharide in cell walls of land plants, comprising a backbone of xylose residues linked by beta-1,4-glycosidic bonds. So, xylanolytic enzymes from microorganism have attracted a great deal of attention in the last decade, particularly because of their biotechnological characteristics in various industrial processes, related to food, feed, ethanol, pulp, and paper industries. A microbial screening of xylanase producer was carried out in Brazilian Cerrado area in Selviria city, Mato Grosso do Sul State, Brazil. About 50 bacterial strains and 15 fungal strains were isolated from soil sample at 35 A degrees C. Between these isolated microorganisms, a bacterium Lysinibacillus sp. and a fungus Neosartorya spinosa as good xylanase producers were identified. Based on identification processes, Lysinibacillus sp. is a new species and the xylanase production by this bacterial genus was not reported yet. Similarly, it has not reported about xylanase production from N. spinosa. The bacterial strain P5B1 identified as Lysinibacillus sp. was cultivated on submerged fermentation using as substrate xylan, wheat bran, corn straw, corncob, and sugar cane bagasse. Corn straw and wheat bran show a good xylanase activity after 72 h of fermentation. A fungus identified as N. spinosa (strain P2D16) was cultivated on solid-state fermentation using as substrate source wheat bran, wheat bran plus sawdust, corn straw, corncob, cassava bran, and sugar cane bagasse. Wheat bran and corncobs show the better xylanase production after 72 h of fermentation. Both crude xylanases were characterized and a bacterial xylanase shows optimum pH for enzyme activity at 6.0, whereas a fungal xylanase has optimum pH at 5.0-5.5. They were stable in the pH range 5.0-10.0 and 5.5-8.5 for bacterial and fungal xylanase, respectively. The optimum temperatures were 55C and 60 A degrees C for bacterial and fungal xylanase, respectively, and they were thermally stable up to 50 A degrees C.

Atividade antiinflamatória de uma heterofucana da alga marrom Padina gymnospora

Fucans, sulfated polysaccharides extracted from brown algae and some echinoderms, have been extensively studied for its diverse biological activities and because of its interference with molecular mechanisms of cell to cell recognition, including leukocyte trafficking from blood vessels into sites of inflammation mediated by selectin, a family of adhesion molecules. In the present study, we examined structural features of a heterofucan extracted from brown algae Padina gymnospora and its effect on the leukocyte migration to the peritoneum. The sulfated polysaccharides were extracted from the brown seaweed by proteolysis with the proteolytic enzyme maxatase. The presence of protein and uronic acid contamination was detected in the crude polysaccharide extract. Fractionation of the crude extract with growing concentrations of acetone produced five fractions with different concentrations of fucose, xylose, uronic acid, galactose, glucose and sulfate. The fraction precipitated with 1.5 volumes of acetone was characterized by infrared and nuclear magnetic resonance, through which can be observed the presence of sulfate groups in the C4 of -L-fucose. The anti-inflammatory action of this composite was assessed by a sodium thioglycollate-induced peritonitis assay and through nitric oxide production by the peritoneal macrophages using Griess reagent. Fraction F1.5 was efficient in reducing leukocyte influx into the peritoneal cavity when 10 mg/kg and 25mg/kg were used, resulting in a decrease of 56 and 39%, respectively. A decrease of nitric oxide production occurred when high concentrations of fucana were used. The cytotoxicity of the composite was also assessed using the reduction of 3-(4,5 dimethylthiazol-2-yl) 2,5-diphenyltetrazolium bromide (MTT). Fraction F1.5 had no cytotoxicity when 500 μg/mL of the fraction was used. This study suggests the use of fraction F1.5 (heterofucan) as an anti-inflammatory

Avaliação de uma fração polissacaridica da alga Lobophora variegata (Lamouroux) em modelo de artrite induzida em ratos por Zymosan

Fucans seaweed Lobophora variegata estructures are known for their chemical and biological properties. In this study, we analyzed, the action of fucans L. variegata and the fractions purified with acetone in Zymosan-induced arthritis. After differential fractionation with acetone, six fractions were obtained and named F0.3, F0.5, F0.8, F1, F1.5 and F2. The results showed that the fraction F1 showed high yield (51.9%) and was chosen for studies of antioxidant activity and induced arthritis. Nuclear magnetic resonance (NMR) of 13C showed signals at 103.3 and 15.78 ppm that are assigned to links β13 galactose and of the C6 methyl fucose, respectively. The infrared (IR) showed absorbance at 1238 and 850 cm-1 which are attributed to sulfate. The fraction F1 showed antioxidant activities in vitro. For analysis of inflammatory parameters chosen the polysaccharide was administered in different doses (25, 50 and 75 mg / kg ip, per body weight) and diclofenac sodium (5 mg / kg ip) and L-NAME (25 mg / kg ip) in groups of animals (n = 6). After 6 h, were analyzed for cellular influx and levels of nitrite. In experiment five days, were made analysis of swelling and serum TNF-α. Histopathological analysis were performed for confirmation of results. The fraction F1 (25, 50 and 75 mg / kg ip) reduced the cellular influx (52.1 to 96.7%) and nitric oxide levels (27.2 - 39%) compared to control group. The reduction of edema (63.4 - 100%) and serum TNF-α (p <0.001) were observed when the polysaccharide F1 administered at a dose (50 mg / kg) These results suggest that these heterofucanas of Lobophora variegata have besides the activity antioxidant and potential anti-inflammatory activity in arthritis induced by zymosan