AVALIAÇÃO DO ESPAÇO DISPONÍVEL PARA ERUPÇÃO DOS SEGUNDOS E TERCEIROS MOLARES SUPERIORES PERMANENTES APÓS A DISTALIZAÇÃO DOS PRIMEIROS MOLARES SUPERIORES PERMANENTES

A presente pesquisa tem como objetivo avaliar cefalometricamente, o espaço e po-sicionamento das coroas dos segundos e terceiros molares superiores permanentes não erupcionados na região da tuberosidade maxilar durante a distalização dos pri-meiros molares superiores, além de verificar a correlação entre estas duas variáveis. A amostra foi constituída de 38 telerradiografias em norma lateral direita, obtidas de 19 pacientes, jovens brasileiros, leucodermas e melanodermas, sendo 6 do sexo masculino e 13 do sexo feminino, com idade média de 9 anos 5 meses 13 dias. A metodologia constou inicialmente da divisão dos tempos (T1) inicial, e após a distali-zação do primeiro molar superior permanente em (T2) por um período médio de 10 meses e 23 dias. Para avaliação do espaço e angulação das coroas existente utili-zou-se uma Linha referencial intracraniana (Linha M) sendo esta demarcada, a partir de dois pontos, o ponto SE localizado na sutura esfenoetmoidal, e o ponto Pt locali-zado na parte anterior da fossa pterigopalatina. Esta linha referencial foi transferida até o ponto F, (Linha M ) ponto este localizado na região mais posterio-inferior da tuberosidade maxilar. O espaço avaliado compreendeu entre a Linha M , até a face distal do primeiro molar superior permanente. Na análise estatística usou-se o teste t (Teste t Student) , e na correlação entre espaço e angulação foi utilizado o coefi-ciente de correlação de Pearson. Concluímos que o espaço correspondente entre a distal dos primeiros molares superiores permanentes e extremidade da tuberosidade maxilar, na fase inicial e após a movimentação distal, não é suficiente para a erup-ção dos segundos e terceiros molares superiores permanentes. A angulação das coroas na fase inicial e após a movimentação distal posicionam-se com angulações mais para distal. Quanto à correlação das angulações das coroas dos segundos e terceiros molares superiores permanentes e o espaço para erupção verificamos que quanto maior a angulação das coroas para distal, menor os espaços oferecidos para a erupção.(AU)

COMPARAÇÃO DAS FORÇAS DE DEFLEXÃO LIBERADAS ENTRE OS FIOS ORTODÔNTICOS ESTÉTICOS E SUA RELAÇÃO COM O REVESTIMENTO

O objetivo do presente estudo consistiu em comparar as forças de deflexão in vitro entre fios estéticos e fio NiTi, para verificar a força máxima e da região platô e determinar sua correlação com o diâmetro do fio com e sem revestimento. Foram realizados dez ensaios de sete marcas comerciais de arcos précontornados, sendo seis fios estéticos (Invu (I), Optis (O), Flexy Super Elastic Esthetic (FSEE), Niticosmetic (N), Orthocosmetic Elastinol (OE) e Pro Form Coated Nitanium (PFCN)) e um fio NiTi superelástico (Nitinol Super Elastic (NSE)), aplicando-se o teste de curvatura de três pontos, associado a máquina de ensaios universal EMIC. Desenvolveu-se um dispositivo com braquetes cerâmicos (Transcend), cujos fios foram presos por elásticos modulares, sendo obtidos os valores da força de deflexão em 3,0, 2,0 e 1,0mm. O diâmetro dos fios com e sem revestimento foram mensurados com o especímetro digital Micromaster. A análise de variância a um critério (p<0,05) mostrou diferença significante entre os fios e o teste post-hoc de Tukey determinou que a força de deflexão em 3mm para o O

AS RELAÇÕES ENTRE BEM-ESTAR NO TRABALHO E PARTICIPAÇÃO EM PROGRAMAS ORGANIZACIONAIS DE PROMOÇÃO DA SAÚDE

No campo científico, a busca por uma maior compreensão acerca de bem-estar no âmbito do trabalho é a tônica do momento, reunindo estudiosos das mais diferentes áreas que demonstram interesse pelo tema. No contexto empresarial, o papel dos programas de promoção da saúde e qualidade de vida torna-se marcante quando se deseja o crescimento da produtividade e do bem-estar dos trabalhadores, considerando a obtenção de resultados crescentes, pela empresa, como fundamentais para que as melhorias nas condições, organização e relações de trabalho ocorram permanentemente. Ou seja, as empresas entendem que com o investimento nesses programas a produtividade deve aumentar, gerando recursos, para que esta se sinta estimulada a continuar investindo no bem-estar dos empregados. Este estudo teve como objetivo promover uma análise sobre as relações entre bem-estar no trabalho, representado por satisfação com o trabalho, envolvimento com o trabalho e comprometimento organizacional afetivo; e freqüência a programas organizacionais de promoção da saúde. A amostra foi constituída por 117 trabalhadores de uma indústria multinacional química e farmacêutica, situada na Grande São Paulo, sendo 53 do sexo masculino e 64 do sexo feminino, com idade média de 30,28 anos, dos quais 63 eram solteiros, 46 casados e oito registram outro estado civil. Para desenvolvimento deste estudo, utilizou-se como instrumento um questionário composto por quatro escalas que mediram satisfação no trabalho, envolvimento com o trabalho, comprometimento organizacional afetivo e freqüência de participação em programas de promoção da saúde, realizados na empresa. Todos os dados recolhidos por meio do instrumento eram numéricos, o que permitiu sua análise eletrônica pelo SPSS, versão 13.0 para Windows. Nessa categoria de dados incluem-se os de descrição da amostra, os referentes a bem-estar no trabalho e freqüência aos programas de promoção da saúde. Foi criado um banco de dados para realização das análises descritivas (freqüências, percentuais, médias e desvios-padrão) e de correlação bivariada (r de Pearson). Os dados que permitiram descrever os programas de promoção da saúde promovidos pela empresa foram obtidos por meio de entrevista com a gerente de responsabilidade social, análise do relatório da empresa e de folhetos elaborados para divulgação e registro desses programas. Um total de cinco categorias de programas foi identificado: benefícios, atividades físicas, saúde, atividades culturais/lazer e ações comunitárias. A maior freqüência aos programas ocorreu na categoria benefícios, pela presença constante no restaurante da empresa. Os resultados deste estudo revelaram que grande parcela do bem-estar no trabalho especialmente no que tange o envolvimento com o trabalho, comprometimento afetivo com a organização, bem como satisfações com os colegas, com a chefia e com o próprio trabalho praticamente independe dos programas de promoção da saúde promovidos pela empresa. Por outro lado, participação em programas de promoção da saúde que incluem as categorias de benefícios, saúde e ações comunitárias, relacionou-se a satisfações com promoções e com salário

The use of correlation and regression methods in optometry

Correlation and regression are two of the statistical procedures most widely used by optometrists. However, these tests are often misused or interpreted incorrectly, leading to erroneous conclusions from clinical experiments. This review examines the major statistical tests concerned with correlation and regression that are most likely to arise in clinical investigations in optometry. First, the use, interpretation and limitations of Pearson's product moment correlation coefficient are described. Second, the least squares method of fitting a linear regression to data and for testing how well a regression line fits the data are described. Third, the problems of using linear regression methods in observational studies, if there are errors associated in measuring the independent variable and for predicting a new value of Y for a given X, are discussed. Finally, methods for testing whether a non-linear relationship provides a better fit to the data and for comparing two or more regression lines are considered.

Development of a questionnaire to assess the relative subjective benefits of presbyopia correction

Purpose To develop a standardized questionnaire of near visual function and satisfaction to complement visual function evaluations of presbyopic corrections. Setting Eye Clinic, School of Life and Health Sciences, Aston University, Midland Eye Institute and Solihull Hospital, Birmingham, United Kingdom. Design Questionnaire development. Methods A preliminary 26-item questionnaire of previously used near visual function items was completed by patients with monofocal intraocular lenses (IOLs), multifocal IOLs, accommodating IOLs, multifocal contact lenses, or varifocal spectacles. Rasch analysis was used for item reduction, after which internal and test–retest reliabilities were determined. Construct validity was determined by correlating the resulting Near Activity Visual Questionnaire (NAVQ) scores with near visual acuity and critical print size (CPS), which was measured using the Minnesota Low Vision Reading Test chart. Discrimination ability was assessed through receiver-operating characteristic (ROC) curve analysis. Results One hundred fifty patients completed the questionnaire. Item reduction resulted in a 10-item NAVQ with excellent separation (2.92), internal consistency (Cronbach a = 0.95), and test–retest reliability (intraclass correlation coefficient = 0.72). Correlations of questionnaire scores with near visual acuity (r = 0.32) and CPS (r = 0.27) provided evidence of validity, and discrimination ability was excellent (area under ROC curve = 0.91). Conclusion Results show the NAVQ is a reliable, valid instrument that can be incorporated into the evaluation of presbyopic corrections.

Estimation of functional connectivity from electromagnetic signals and the amount of empirical data required

An increasing number of neuroimaging studies are concerned with the identification of interactions or statistical dependencies between brain areas. Dependencies between the activities of different brain regions can be quantified with functional connectivity measures such as the cross-correlation coefficient. An important factor limiting the accuracy of such measures is the amount of empirical data available. For event-related protocols, the amount of data also affects the temporal resolution of the analysis. We use analytical expressions to calculate the amount of empirical data needed to establish whether a certain level of dependency is significant when the time series are autocorrelated, as is the case for biological signals. These analytical results are then contrasted with estimates from simulations based on real data recorded with magnetoencephalography during a resting-state paradigm and during the presentation of visual stimuli. Results indicate that, for broadband signals, 50-100 s of data is required to detect a true underlying cross-correlations coefficient of 0.05. This corresponds to a resolution of a few hundred milliseconds for typical event-related recordings. The required time window increases for narrow band signals as frequency decreases. For instance, approximately 3 times as much data is necessary for signals in the alpha band. Important implications can be derived for the design and interpretation of experiments to characterize weak interactions, which are potentially important for brain processing.

Development of a near activity visual questionnaire to assess accommodating intraocular lenses

Purpose: To develop a questionnaire that subjectively assesses near visual function in patients with 'accommodating' intraocular lenses (IOLs). Methods: A literature search of existing vision-related quality-of-life instruments identified all questions relating to near visual tasks. Questions were combined if repeated in multiple instruments. Further relevant questions were added and item interpretation confirmed through multidisciplinary consultation and focus groups. A preliminary 19-item questionnaire was presented to 22 subjects at their 4-week visit post first eye phacoemulsification with 'accommodative' IOL implantation, and again 6 and 12 weeks post-operatively. Rasch Analysis, Frequency of Endorsement, and tests of normality (skew and kurtosis) were used to reduce the instrument. Cronbach's alpha and test-retest reliability (intraclass correlation coefficient, ICC) were determined for the final questionnaire. Construct validity was obtained by Pearson's product moment correlation (PPMC) of questionnaire scores to reading acuity (RA) and to Critical Print Size (CPS) reading speed. Criterion validity was obtained by receiver operating characteristic (ROC) curve analysis and dimensionality of the questionnaire was assessed by factor analysis. Results: Rasch Analysis eliminated nine items due to poor fit statistics. The final items have good separation (2.55), internal consistency (Cronbach's α = 0.97) and test-retest reliability (ICC = 0.66). PPMC of questionnaire scores with RA was 0.33, and with CPS reading speed was 0.08. Area under the ROC curve was 0.88 and Factor Analysis revealed one principal factor. Conclusion: The pilot data indicates the questionnaire to be internally consistent, reliable and a valid instrument that could be useful for assessing near visual function in patients with 'accommodating' IOLS. The questionnaire will now be expanded to include other types of presbyopic correction. © 2007 British Contact Lens Association.

Statnote 14: the correlation of two variables (Pearson's 'r')

Pearson's correlation coefficient (‘r’) is one of the most widely used of all statistics. Nevertheless, care needs to be used in interpreting the results because with large numbers of observations, quite small values of ‘r’ become significant and the X variable may only account for a small proportion of the variance in Y. Hence, ‘r squared’ should always be calculated and included in a discussion of the significance of ‘r’. The use of ‘r’ also assumes that the data follow a bivariate normal distribution (see Statnote 17) and this assumption should be examined prior to the study. If the data do not conform to such a distribution, the use of a non-parametric correlation coefficient should be considered. A significant correlation should not be interpreted as indicating ‘causation’ especially in observational studies, in which the two variables may be correlated because of their mutual correlations with other confounding variables.

Perceptions of technological change : the attitude of managers towards group technology in the United States food equipment industry

In the center of today's continued and rapid technological change and ever competitive environment of the next millennium, manufacturers must realize that unless they are ready to consider and evaluate new technologies brought onto them, they may fail to adequately respond to the challenges that lie ahead of them. This research was designed to determine the consistency of the perceptions of technical and non-technical administrators, in manufacturing environment, towards technological change and group technology as an advanced manufacturing system. This research has included a review of literature with references to technological change, justification and implementation processes, and various manufacturing systems including group technology and its benefits. This research has used the research method of empirical analysis (quantitative) and case studies (qualitative) to research perceptions of technical and non-technical administrators towards technological change and group technology. Sixty-four (64) technical and fifty-one (51) nontechnical administrators from fifty (50) manufacturing organizations in the United States of America responded to the mail survey questionnaire used in this research. Responses were analyzed using the Repeated Measures ANOVA procedure to compare mean responses of each group. Two correlation analyses, Cronback Coefficient Alpha and Pearson Correlation Coefficient, were also performed to determine the reliability of the questionnaire as well as the degree of correlation of perceptions between these two groups. This research, through the empirical analysis, has found that perceptions of the technical and non-technical administrators towards group technology were not consistent. In other words, they did not perceive the benefits of group technology in the same manner to the overall organizational performance. This finding was significant since it provided the first clear and comprehensive view of the technical and non-technical administrators' perception towards group technology and technological change, in Food Equipment Manufacturer Industry, in United States of America. In addition, a number of cases were analyzed and the results have supported those of the quantitative analysis. Therefore, this research not only has provided basic data, which was unavailable prior to this investigation, but it also provided a basis for future studies.

Design and validity of a miniaturized open-field aberrometer

PURPOSE: To validate a new miniaturised, open-field wavefront device which has been developed with the capacity to be attached to an ophthalmic surgical microscope or slit-lamp. SETTING: Solihull Hospital and Aston University, Birmingham, UK DESIGN: Comparative non-interventional study. METHODS: The dynamic range of the Aston Aberrometer was assessed using a calibrated model eye. The validity of the Aston Aberrometer was compared to a conventional desk mounted Shack-Hartmann aberrometer (Topcon KR1W) by measuring the refractive error and higher order aberrations of 75 dilated eyes with both instruments in random order. The Aston Aberrometer measurements were repeated five times to assess intra-session repeatability. Data was converted to vector form for analysis. RESULTS: The Aston Aberrometer had a large dynamic range of at least +21.0 D to -25.0 D. It gave similar measurements to a conventional aberrometer for mean spherical equivalent (mean difference ± 95% confidence interval: 0.02 ± 0.49D; correlation: r=0.995, p<0.001), astigmatic components (J0: 0.02 ± 0.15D; r=0.977, p<0.001; J45: 0.03 ± 0.28; r=0.666, p<0.001) and higher order aberrations RMS (0.02 ± 0.20D; r=0.620, p<0.001). Intraclass correlation coefficient assessments of intra-sessional repeatability for the Aston Aberrometer were excellent (spherical equivalent =1.000, p<0.001; astigmatic components J0 =0.998, p<0.001, J45=0.980, p<0.01; higher order aberrations RMS =0.961, p<0.001). CONCLUSIONS: The Aston Aberrometer gives valid and repeatable measures of refractive error and higher order aberrations over a large range. As it is able to measure continuously, it can provide direct feedback to surgeons during intraocular lens implantations and corneal surgery as to the optical status of the visual system.

Statnote 35: are the data log-normal?

In many of the Statnotes described in this series, the statistical tests assume the data are a random sample from a normal distribution These Statnotes include most of the familiar statistical tests such as the ‘t’ test, analysis of variance (ANOVA), and Pearson’s correlation coefficient (‘r’). Nevertheless, many variables exhibit a more or less ‘skewed’ distribution. A skewed distribution is asymmetrical and the mean is displaced either to the left (positive skew) or to the right (negative skew). If the mean of the distribution is low, the degree of variation large, and when values can only be positive, a positively skewed distribution is usually the result. Many distributions have potentially a low mean and high variance including that of the abundance of bacterial species on plants, the latent period of an infectious disease, and the sensitivity of certain fungi to fungicides. These positively skewed distributions are often fitted successfully by a variant of the normal distribution called the log-normal distribution. This statnote describes fitting the log-normal distribution with reference to two scenarios: (1) the frequency distribution of bacterial numbers isolated from cloths in a domestic environment and (2), the sizes of lichenised ‘areolae’ growing on the hypothalus of Rhizocarpon geographicum (L.) DC.

Statnote 36: Do the data fit the Poisson distribution

In previous Statnotes, many of the statistical tests described rely on the assumption that the data are a random sample from a normal or Gaussian distribution. These include most of the tests in common usage such as the ‘t’ test ), the various types of analysis of variance (ANOVA), and Pearson’s correlation coefficient (‘r’) . In microbiology research, however, not all variables can be assumed to follow a normal distribution. Yeast populations, for example, are a notable feature of freshwater habitats, representatives of over 100 genera having been recorded . Most common are the ‘red yeasts’ such as Rhodotorula, Rhodosporidium, and Sporobolomyces and ‘black yeasts’ such as Aurobasidium pelculans, together with species of Candida. Despite the abundance of genera and species, the overall density of an individual species in freshwater is likely to be low and hence, samples taken from such a population will contain very low numbers of cells. A rare organism living in an aquatic environment may be distributed more or less at random in a volume of water and therefore, samples taken from such an environment may result in counts which are more likely to be distributed according to the Poisson than the normal distribution. The Poisson distribution was named after the French mathematician Siméon Poisson (1781-1840) and has many applications in biology, especially in describing rare or randomly distributed events, e.g., the number of mutations in a given sequence of DNA after exposure to a fixed amount of radiation or the number of cells infected by a virus given a fixed level of exposure. This Statnote describes how to fit the Poisson distribution to counts of yeast cells in samples taken from a freshwater lake.

Development and validation of an HPLC method for the rapid and simultaneous determination of 6-mercaptopurine and four of its metabolites in plasma and red blood cells

An HPLC method has been developed and validated for the rapid determination of mercaptopurine and four of its metabolites; thioguanine, thiouric acid, thioxanthine and methylmercaptopurine in plasma and red blood cells. The method involves a simple treatment procedure based on deproteinisation by perchloric acid followed by acid hydrolysis and heating for 45min at 100 degrees C. The developed method was linear over the concentration range studied with a correlation coefficient >0.994 for all compounds in both plasma and erythrocytes. The lower limits of quantification were 13, 14, 3, 2, 95pmol/8 x 10(8) RBCs and 2, 5, 2, 3, 20ng/ml plasma for thioguanine, thiouric acid, mercaptopurine, thioxanthine and methylmercaptopurine, respectively. The method described is selective and sensitive enough to analyse the different metabolites in a single run under isocratic conditions. Furthermore, it has been shown to be applicable for monitoring these metabolites in paediatric patients due to the low volume requirement (200microl of plasma or erythrocytes) and has been successfully applied for investigating population pharmacokinetics, pharmacogenetics and non-adherence to therapy in these patients.

Nursing faculty intention to use service learning as pedagogy in higher education

The purpose of this study was to identify the factors that motivate nursing faculty to use service learning. The study was based on the theory of planned behavior (TPB), which implies that the target behavior of intention to use service learning in higher education is influenced by the predictor variables of behavior beliefs (attitude), normative beliefs (peer influence), and control beliefs (confidence and resources). External variables were also considered (years of teaching experience, tenure status, and the type of curriculum). ^ Group interviews and a pilot test were conducted to create the instrument for the study, and Cronbach alpha were calculated for survey item reliability. The participants were full time undergraduate nursing faculty members ( n = 160) in the Southeastern United States who taught in universities with accredited nurse education programs. Demographic data as well as scores on scaled survey responses were used to evaluate the intention of nursing faculty to use service learning in their classes. ^ Pearson product moment correlation coefficient and path analysis were applied to the data. The correlation findings indicated that there were statistically significant relationships between behavior beliefs, normative beliefs, and control beliefs and nursing faculty intention to use service learning. The path analysis also indicated that behavior beliefs and normative beliefs were significant, while control beliefs were not a strong influence on intention to use service learning. Normative beliefs showed the strongest direct influence. The use of a community based curriculum also had a positive influence on intention, and faculty with tenure status were more likely to have positive behavior beliefs (attitude) towards service learning. Finally, as teaching experience increased, positive attitudes towards the intention to use service learning decreased. Seventy-nine percent of the variation in the intention to use service learning was explained by the theory of planned behavior, the type of curriculum, teaching experience, and tenure status. These results will assist nursing administration and faculty to design strategies to facilitate the implementation of service learning pedagogy, as well as a community based curriculum which will help meet the 21st century goals set forth from the American Association of Colleges of Nursing. ^

Motion correction algorithm of lung tumors for respiratory gated PET images

Respiratory gating in lung PET imaging to compensate for respiratory motion artifacts is a current research issue with broad potential impact on quantitation, diagnosis and clinical management of lung tumors. However, PET images collected at discrete bins can be significantly affected by noise as there are lower activity counts in each gated bin unless the total PET acquisition time is prolonged, so that gating methods should be combined with imaging-based motion correction and registration methods. The aim of this study was to develop and validate a fast and practical solution to the problem of respiratory motion for the detection and accurate quantitation of lung tumors in PET images. This included: (1) developing a computer-assisted algorithm for PET/CT images that automatically segments lung regions in CT images, identifies and localizes lung tumors of PET images; (2) developing and comparing different registration algorithms which processes all the information within the entire respiratory cycle and integrate all the tumor in different gated bins into a single reference bin. Four registration/integration algorithms: Centroid Based, Intensity Based, Rigid Body and Optical Flow registration were compared as well as two registration schemes: Direct Scheme and Successive Scheme. Validation was demonstrated by conducting experiments with the computerized 4D NCAT phantom and with a dynamic lung-chest phantom imaged using a GE PET/CT System. Iterations were conducted on different size simulated tumors and different noise levels. Static tumors without respiratory motion were used as gold standard; quantitative results were compared with respect to tumor activity concentration, cross-correlation coefficient, relative noise level and computation time. Comparing the results of the tumors before and after correction, the tumor activity values and tumor volumes were closer to the static tumors (gold standard). Higher correlation values and lower noise were also achieved after applying the correction algorithms. With this method the compromise between short PET scan time and reduced image noise can be achieved, while quantification and clinical analysis become fast and precise.