Reconstruction of a multi-vent kimberlite eruption from deposit and host rock characteristics: Jericho kimberlite, Nunavut, Canada

The Jericho kimberlite (173.1. ±. 1.3. Ma) is a small (~. 130. ×. 70. m), multi-vent system that preserves products from deep (>. 1. km?) portions of kimberlite vents. Pit mapping, drill core examination, petrographic study, image analysis of olivine crystals (grain size distributions and shape studies), and compositional and mineralogical studies, are used to reconstruct processes from near-surface magma ascent to kimberlite emplacement and alteration. The Jericho kimberlite formed by multiple eruptions through an Archean granodiorite batholith that was overlain by mid-Devonian limestones ~. 1. km in thickness. Kimberlite magma ascended through granodiorite basement by dyke propagation but ascended through limestone, at least in part, by locally brecciating the host rocks. After the first explosive breakthrough to surface, vent deepening and widening occurred by the erosive forces of the waxing phase of the eruption, by gravitationally induced failures as portions of the vent margins slid into the vent and, in the deeper portions of the vent (>. 1. km), by scaling, as thin slabs burst from the walls into the vent. At currently exposed levels, coherent kimberlite (CK) dykes (<. 40. cm thick) are found to the north and south of the vent complex and represent the earliest preserved in-situ products of Jericho magmatism. Timing of CK emplacement on the eastern side of the vent complex is unclear; some thick CK (15-20. m) may have been emplaced after the central vent was formed. Explosive eruptive products are preserved in four partially overlapping vents that are roughly aligned along strike with the coherent kimberlite dyke. The volcaniclastic kimberlite (VK) facies are massive and poorly sorted, with matrix- to clast-supported textures. The VK facies fragmented by dry, volatile-driven processes and were emplaced by eruption column collapse back into the volcanic vents. The first explosive products, poorly preserved because of partial destruction by later eruptions, are found in the central-east vent and were formed by eruption column collapse after the vent was largely cleared of country rock debris. The next active vent was either the north or south vent. Collapse of the eruption column, linked to a vent widening episode, resulted in coeval avalanching of pipe margin walls into the north vent, forming interstratified lenses of country rock-rich boulder breccias in finer-grained volcaniclastic kimberlite. South vent kimberlite has similar characteristics to kimberlite of the north vent and likely formed by similar processes. The final eruptive phase formed olivine-rich and moderately sorted deposits of the central vent. Better sorting is attributed to recycling of kimberlite debris by multiple eruptions through the unconsolidated volcaniclastic pile and associated collapse events. Post-emplacement alteration varies in intensity, but in all cases, has overprinted the primary groundmass and matrix, in CK and VK, respectively. Erosion has since removed all limestone cover.

A practical guide to terminology for kimberlite facies: A systematic progression from descriptive to genetic, including a pocket guide

Kimberlite terminology remains problematic because both descriptive and genetic terms are mixed together in most existing terminology schemes. In addition, many terms used in existing kimberlite terminology schemes are not used in mainstream volcanology, even though kimberlite bodies are commonly the remains of kimberlite volcanic vents and edifices. We build on our own recently published approach to kimberlite facies terminology, involving a systematic progression from descriptive to genetic. The scheme can be used for both coherent kimberlite (i.e. kimberlite that was emplaced without undergoing any fragmentation processes and therefore preserving coherent igneous textures) and fragmental kimberlites. The approach involves documentation of components, textures and assessing the degree and effects of alteration on both components and original emplacement textures. This allows a purely descriptive composite component, textural and compositional petrological rock or deposit name to be constructed first, free of any biases about emplacement setting and processes. Then important facies features such as depositional structures, contact relationships and setting are assessed, leading to a composite descriptive and genetic name for the facies or rock unit that summarises key descriptive characteristics, emplacement processes and setting. Flow charts summarising the key steps in developing a progressive descriptive to genetic terminology are provided for both coherent and fragmental facies/deposits/rock units. These can be copied and used in the field, or in conjunction with field (e.g. drill core observations) and petrographic data. Because the approach depends heavily on field scale observations, characteristics and process interpretations, only the first descriptive part is appropriate where only petrographic observations are being made. Where field scale observations are available the progression from developing descriptive to interpretative terminology can be used, especially where some petrographic data also becomes available.

Some major problems with existing models and terminology associated with kimberlite pipes from a volcanological perspective, and some suggestions

Five significant problems hinder advances in understanding of the volcanology of kimberlites: (1) kimberlite geology is very model driven; (2) a highly genetic terminology drives deposit or facies interpretation; (3) the effects of alteration on preserved depositional textures have been grossly underestimated; (4) the level of understanding of the physical process significance of preserved textures is limited; and, (5) some inferred processes and deposits are not based on actual, modern volcanological processes. These issues need to be addressed in order to advance understanding of kimberlite volcanological pipe forming processes and deposits. The traditional, steep-sided southern African pipe model (Class I) consists of a steep tapering pipe with a deep root zone, a middle diatreme zone and an upper crater zone (if preserved). Each zone is thought to be dominated by distinctive facies, respectively: hypabyssal kimberlite (HK, descriptively called here massive coherent porphyritic kimberlite), tuffisitic kimberlite breccia (TKB, descriptively here called massive, poorly sorted lapilli tuff) and crater zone facies, which include variably bedded pyroclastic kimberlite and resedimented and reworked volcaniclastic kimberlite (RVK). Porphyritic coherent kimberlite may, however, also be emplaced at different levels in the pipe, as later stage intrusions, as well as dykes in the surrounding country rock. The relationship between HK and TKB is not always clear. Sub-terranean fluidisation as an emplacement process is a largely unsubstantiated hypothesis; modern in-vent volcanological processes should initially be considered to explain observed deposits. Crater zone volcaniclastic deposits can occur within the diatreme zone of some pipes, indicating that the pipe was largely empty at the end of the eruption, and subsequently began to fill-in largely through resedimentation and sourcing of pyroclastic deposits from nearby vents. Classes II and III Canadian kimberlite models have a more factual, descriptive basis, but are still inadequately documented given the recency of their discovery. The diversity amongst kimberlite bodies suggests that a three-model classification is an over-simplification. Every kimberlite is altered to varying degrees, which is an intrinsic consequence of the ultrabasic composition of kimberlite and the in-vent context; few preserve original textures. The effects of syn- to post-emplacement alteration on original textures have not been adequately considered to date, and should be back-stripped to identify original textural elements and configurations. Applying sedimentological textural configurations as a guide to emplacement processes would be useful. The traditional terminology has many connotations about spatial position in pipe and of process. Perhaps the traditional terminology can be retained in the industrial situation as a general lithofacies-mining terminological scheme because it is so entrenched. However, for research purposes a more descriptive lithofacies terminology should be adopted to facilitate detailed understanding of deposit characteristics, important variations in these, and the process origins. For example every deposit of TKB is different in componentry, texture, or depositional structure. However, because so many deposits in many different pipes are called TKB, there is an implication that they are all similar and that similar processes were involved, which is far from clear.

An exploration of The Virtues Project: Ontological, educational and cross-cultural inquiries into a moral education program within a Mongolian school setting

This thesis explores The Virtues Project's ontological, educational and cross-cultural dimensions taking Charles Taylor's philosophical perspective of an anthropological account of the self and a phenomenological account of moral life and engagement. The experience of Mongolian schoolteachers implementing this moral education program is analyzed using a narrative inquiry method. The globally attractive project appears in moral education and virtues ethics research and surveys, yet no critical evaluation has been undertaken. Its conceptual features are appraised from a Taylorean perspective. The Listening Guide analysis of teacher experiences is presented in two narratives. The first is about the teachers' implementation experiences of moral flourishing as selves, in relationships and in community. The second is about their experience of becoming Mongolian in their modern day context. In conclusion, the project is coherent, constructive and potentially suitable cross-culturally.

Beyond Science Education: Embedding sustainability in teacher education systems

This chapter will report on a study that sought to develop a systemwide approach to embedding education for sustainability (EfS (the preferred term in Australia) in teacher education. The strategy for a coordinated and coherent systemic approach involved identifying and eliciting the participation of key agents of change within the‘teacher education system’ in one state in Australia, Queensland. This consisted of one representative from each of the eight Queensland universities offering pre-service teacher education, as well as the teacher registration authority, the key State Government agency responsible for public schools, and two national professional organisations. Part of the approach involved teacher educators at different universities developing an institutional specific approach to embedding sustainability education within their teacher preparation programs. Project participants worked collaboratively to facilitate policy and curriculum change while the project leaders used an action research approach to inform and monitor actions taken and to provide guidance for subsequent actions to effect change simultaneously at the state, institutional and course levels. In addition to the state-wide multi-site case study, which we argue has broader applications to national systems in other countries, the chapter will include two institutional level case studies of efforts to embed sustainability in science teacher education.

Community development and community resilience: An integrative approach

Throughout history, communities and civilizations have sought to enhance the quality of community life and the well-being of its people. However, more recently there has been greater interest in attending to the details of community development by capitalizing on the improved ability to capture community well-being and successes scientifically. That interest invites greater attention to the development of indicators that can quantify those qualities of life that lead to strong and healthy communities. The selection of meaningful indicators is dependent upon several factors including a process that stimulates meaningful involvement of community stakeholders, but the single most important is the identification of an underlying model to guide the work. Indicators do not have meaning in themselves. For these measures to provide a coherent assessment of the community, an integrative approach to understanding what constitutes a healthy and strong community in a dynamic environment is required. A resilience perspective serves that purpose and provides a framework that is broad, neutral, and conceptually strong enough to structure development of significant sets of indicators. Exemplary community indicator processes across the nation, particularly recent efforts in the Phoenix, Arizona region, provide evidence supporting the value of indicator development for community building.

Separate or simultaneous removal of radioactive cations and anions from water by layered sodium vanadate-based sorbents

Nanofibers of sodium vanadate, consisting of very thin negatively charged layers and exchangeable sodium ions between the layers, are efficient sorbents for the removal of radioactive 137Cs+ and 85Sr2+ cations from water. The exchange of 137Cs+ or 85Sr2+ ions with the interlayer Na+ ions eventually triggered structural deformation of the thin layers, trapping the 137Cs+ and 85Sr2+ ions in the nanofibers. Furthermore, when the nanofibers were dispersed in a AgNO3 solution at pH >7, well-dispersed Ag2O nanocrystals formed by firmly anchoring themselves on the fiber surfaces along planes of crystallographic similarity with those of Ag2O. These nanocrystals can efficiently capture I– anions by forming a AgI precipitate, which was firmly attached to the substrates. We also designed sorbents that can remove 137Cs+ and 125I– ions simultaneously for safe disposal by optimizing the Ag2O loading and sodium content of the vanadate. This study confirms that sorbent features such as fibril morphology, negatively charged thin layers and readily exchangeable Na+ ions between the layers, and the crystal planes for the formation of a coherent interface with Ag2O nanocrystals on the fiber surface are very important for the simultaneous uptake of cations and anions.

Reinforcing stigma or delivering a fresh start: Bankruptcy and future engagement in the workforce

In Australia, bankruptcy retains a social stigma, as is often seen as a personal failing, and an indication that the individual cannot be trusted to meet their obligations. Official labelling and informal labelling reinforce this stigmatisation of bankruptcy in employment and business contexts. This occurs through legislation and policy that imposes restrictions on participation in some occupations on the grounds of bankruptcy, and imposes obligations on persons to disclose their bankruptcy to their employer. These restrictions and obligations that are varying in length and extent, both within industries and professions and across industries and professions, and appear to lack a coherent policy justification. Further, informal labelling is facilitated by the law providing for a permanent, publicly accessible record of bankruptcy, and failing to restrict the use of bankruptcy information in employment and business decision-making. This stigmatisation of bankruptcy inhibits the fresh start objective of bankruptcy, and is not supported by a strong correlation between bankruptcy and negative personal or other attributes. This article therefore argues that a review is needed to determine the circumstances in which there is a genuine policy justification for employment restrictions, and the appropriate length and scope of such restrictions. Reform of the Bankruptcy Act should also be considered. Possible areas for law reform including reducing the minimum period of bankruptcy; removing the permanency and/or public accessibility of the bankruptcy record; revising the language used in the Bankruptcy Act; and introducing a prohibition or restriction on the ability of employers to use bankruptcy status in employment decision making. Such changes would promote the fresh start objective of Australia’s bankruptcy system, and increase the likelihood that bankruptcy does not unfairly inhibit an individual’s ability to engage as an economic actor in Australian society and thereby improve their financial well-being.

Global, regional, and national disability-adjusted life years (DALYs) for 306 diseases and injuries and healthy life expectancy (HALE) for 188 countries, 1990–2013: Quantifying the epidemiological transition

Background The Global Burden of Disease Study 2013 (GBD 2013) aims to bring together all available epidemiological data using a coherent measurement framework, standardised estimation methods, and transparent data sources to enable comparisons of health loss over time and across causes, age–sex groups, and countries. The GBD can be used to generate summary measures such as disability-adjusted life-years (DALYs) and healthy life expectancy (HALE) that make possible comparative assessments of broad epidemiological patterns across countries and time. These summary measures can also be used to quantify the component of variation in epidemiology that is related to sociodemographic development. Methods We used the published GBD 2013 data for age-specific mortality, years of life lost due to premature mortality (YLLs), and years lived with disability (YLDs) to calculate DALYs and HALE for 1990, 1995, 2000, 2005, 2010, and 2013 for 188 countries. We calculated HALE using the Sullivan method; 95% uncertainty intervals (UIs) represent uncertainty in age-specific death rates and YLDs per person for each country, age, sex, and year. We estimated DALYs for 306 causes for each country as the sum of YLLs and YLDs; 95% UIs represent uncertainty in YLL and YLD rates. We quantified patterns of the epidemiological transition with a composite indicator of sociodemographic status, which we constructed from income per person, average years of schooling after age 15 years, and the total fertility rate and mean age of the population. We applied hierarchical regression to DALY rates by cause across countries to decompose variance related to the sociodemographic status variable, country, and time. Findings Worldwide, from 1990 to 2013, life expectancy at birth rose by 6·2 years (95% UI 5·6–6·6), from 65·3 years (65·0–65·6) in 1990 to 71·5 years (71·0–71·9) in 2013, HALE at birth rose by 5·4 years (4·9–5·8), from 56·9 years (54·5–59·1) to 62·3 years (59·7–64·8), total DALYs fell by 3·6% (0·3–7·4), and age-standardised DALY rates per 100 000 people fell by 26·7% (24·6–29·1). For communicable, maternal, neonatal, and nutritional disorders, global DALY numbers, crude rates, and age-standardised rates have all declined between 1990 and 2013, whereas for non–communicable diseases, global DALYs have been increasing, DALY rates have remained nearly constant, and age-standardised DALY rates declined during the same period. From 2005 to 2013, the number of DALYs increased for most specific non-communicable diseases, including cardiovascular diseases and neoplasms, in addition to dengue, food-borne trematodes, and leishmaniasis; DALYs decreased for nearly all other causes. By 2013, the five leading causes of DALYs were ischaemic heart disease, lower respiratory infections, cerebrovascular disease, low back and neck pain, and road injuries. Sociodemographic status explained more than 50% of the variance between countries and over time for diarrhoea, lower respiratory infections, and other common infectious diseases; maternal disorders; neonatal disorders; nutritional deficiencies; other communicable, maternal, neonatal, and nutritional diseases; musculoskeletal disorders; and other non-communicable diseases. However, sociodemographic status explained less than 10% of the variance in DALY rates for cardiovascular diseases; chronic respiratory diseases; cirrhosis; diabetes, urogenital, blood, and endocrine diseases; unintentional injuries; and self-harm and interpersonal violence. Predictably, increased sociodemographic status was associated with a shift in burden from YLLs to YLDs, driven by declines in YLLs and increases in YLDs from musculoskeletal disorders, neurological disorders, and mental and substance use disorders. In most country-specific estimates, the increase in life expectancy was greater than that in HALE. Leading causes of DALYs are highly variable across countries. Interpretation Global health is improving. Population growth and ageing have driven up numbers of DALYs, but crude rates have remained relatively constant, showing that progress in health does not mean fewer demands on health systems. The notion of an epidemiological transition—in which increasing sociodemographic status brings structured change in disease burden—is useful, but there is tremendous variation in burden of disease that is not associated with sociodemographic status. This further underscores the need for country-specific assessments of DALYs and HALE to appropriately inform health policy decisions and attendant actions.

Twist phase in Gaussian-beam optics

The recently discovered twist phase is studied in the context of the full ten-parameter family of partially coherent general anisotropic Gaussian Schell-model beams. It is shown that the nonnegativity requirement on the cross-spectral density of the beam demands that the strength of the twist phase be bounded from above by the inverse of the transverse coherence area of the beam. The twist phase as a two-point function is shown to have the structure of the generalized Huygens kernel or Green's function of a first-order system. The ray-transfer matrix of this system is exhibited. Wolf-type coherent-mode decomposition of the twist phase is carried out. Imposition of the twist phase on an otherwise untwisted beam is shown to result in a linear transformation in the ray phase space of the Wigner distribution. Though this transformation preserves the four-dimensional phase-space volume, it is not symplectic and hence it can, when impressed on a Wigner distribution, push it out of the convex set of all bona fide Wigner distributions unless the original Wigner distribution was sufficiently deep into the interior of the set.

A phase field study of morphological instabilities in multilayer thin films

We studied the microstructural evolution of multiple layers of elastically stiff films embedded in an elastically soft matrix using a phase field model. The coherent and planar film/matrix interfaces are rendered unstable by the elastic stresses due to a lattice parameter mismatch between the film and matrix phases, resulting in the break-up of the films into particles. With an increasing volume fraction of the stiff phase, the elastic interactions between neighbouring layers lead to: (i) interlayer correlations from an early stage; (ii) a longer wavelength for the maximally growing wave; and therefore (iii) a delayed break-LIP. Further, they promote a crossover in the mode of instability from a predominantly anti-symmetric (in phase) one to a symmetric (out of phase) one. We have computed a stability diagram for the most probable mode of break-up in terms of elastic modulus Mismatch and Volume fraction. We rationalize our results in terms of the initial driving force for destabilization, and corroborate our conclusions using simulations in elastically anisotropic systems.

Ultrafast Raman loss spectroscopy

This paper deals with a new form of nonlinear Raman spectroscopy called `ultrafast Raman loss spectroscopy (URLS)'. URLS is analogous to stimulated Raman spectroscopy (SRS) but is much more sensitive than SRS. The signals are background (noise) free unlike in coherent anti-Stokes Raman spectroscopy (CARS) and it provides natural fluorescence rejection, which is a major problem in Raman spectroscopy. In addition, being a self-phase matching process, the URLS experiment is much easier than CARS, which requires specific phase matching of the laser pulses. URLS is expected to be alternative if not competitive to CARS microscopy, which has become a popular technique in applications to materials, biology and medicine.

NMR studies of molecular dynamics in tetramethylammonium tetrabromo cadmate

Internal motions in a A2BX4 compound (tetramethylammonium tetrabromo cadmate) have been investigated using proton spin—lattice relaxation time (T1) and second moment (M2) measurements in the temperature range 77 to 400 K. T1 measurements at three Larmor frequencies (10, 20 and 30 MHz) show isotropic tumbling of the tetramethylammonium group, random reorientation of methyl groups and spin—rotation interaction, and the corresponding parameters have been computed. The cw spectrum is narrow throughout the temperature range and shows side bands at the lowest temperature. This observation, along with the free-induction-decay behavior at these temperatures, is interpreted as the onset of a coherent motion, e.g. methyl group quantum tunnelling.

Practical Algorithms For Mean Velocity Estimation In Pulse Doppler Weather Radars Using A Small Number Of Samples

Doppler weather radars with fast scanning rates must estimate spectral moments based on a small number of echo samples. This paper concerns the estimation of mean Doppler velocity in a coherent radar using a short complex time series. Specific results are presented based on 16 samples. A wide range of signal-to-noise ratios are considered, and attention is given to ease of implementation. It is shown that FFT estimators fare poorly in low SNR and/or high spectrum-width situations. Several variants of a vector pulse-pair processor are postulated and an algorithm is developed for the resolution of phase angle ambiguity. This processor is found to be better than conventional processors at very low SNR values. A feasible approximation to the maximum entropy estimator is derived as well as a technique utilizing the maximization of the periodogram. It is found that a vector pulse-pair processor operating with four lags for clear air observation and a single lag (pulse-pair mode) for storm observation may be a good way to estimate Doppler velocities over the entire gamut of weather phenomena.

Tyhjä taivas : Georges Bataille ja uskonnon kysymys

Empty Heavens. Georges Bataille and the Question of Religion. The dissertation explores the question of religion in the texts of Georges Bataille (1897 1962), the controversial French avant-garde writer and philosopher. Passionate about religion throughout his life, Bataille devoted to it both critical analyses and personal meditations. In this study, Bataille s multifaceted relationship to religion is interpreted as expressing a passion for radical otherness. Bataille is approached as a characteristically modern thinker who, nevertheless, questions some landmarks of modernity insofar as modernity is interpreted as a triumph of secularization. The dissertation is situated at the intersection of comparative religion and philosophy of religion. Methodologically, the study resorts to theoretical contextualization and concept analysis. Acknowledging that Bataille s writings challenge the assumptions about coherent meaning taken for granted in traditional philosophical analysis, the study also pays attention to the literary means and, in general, the performative level of Bataille s texts. The study constructs three theoretical contexts for Bataille s question of religion first of all, the interpretation of Hegel in the mid-20th century French philosophy. In the first section of the study, Bataille s uneasy relationship with Hegel as mediated by Alexandre Kojève is explored. The motivation of his question of radical otherness is argued to arise from his struggle with the Hegelian Kojèvean notion of negativity. The second context is the dialogue with the Christian mystical tradition. Starting from the analysis of two Bataillean notions, dramatization and contestation , it is argued that, firstly, Bataille s approach to radical otherness is analogous to certain procedures of mystical texts while, secondly, the function of otherness providing no firm foundation in Bataille s texts differs from its function in mystical texts. In the third section of the study, Bataille s quest for otherness is concretized by analyzing his views on otherness of other person, on violence, and on death themes that are brought together in Bataille s lasting interest in sacrifice. Bataille s understanding of sacrifice is proportioned to social scientific and philosophical discussions on sacrifice. It is argued that the commitment to the idea of sacrifice accounts for a partial failure in the Bataillean approach to otherness, the otherness of other person remaining its (at least half) blind spot. The study presents an overview of Bataille s thought on religion. It brings out Bataille s view of the paradoxical fundamental yet impossible role of otherness in the construction of human world, as well as his understanding of religious representations as both covering over and indicating this otherness. It describes Bataille s atheological mysticism as a peculiar modern form of religiosity, as an ambivalent mourning for and exaltation of fundamental loss.