Occupational risk in a glass manufacturing industry unit

Risk assessment is one of the main pillars of the framework directive and other directives in respect of health and safety. It is also the basis of an effective management of safety and health as it is essential to reduce work-related accidents and occupational diseases. To survey the hazards eventually present in the workplaces the usual procedures are i) gathering information about tasks/activities, employees, equipment, legislation and standards; ii) observation of the tasks and; iii) quantification of respective risks through the most adequate risk assessment among the methodologies available. From this preliminary evaluation of a welding plant and, from the different measurable parameters, noise was considered the most critical. This paper focus not only the usual way of risk assessment for noise but also another approach that may allow us to identify the technique with which a weld is being performed.

Neuroartropatia de Charcot do pé diabético: identificação, tratamento conservador e prevenção das suas complicações

Mestrado em Gestão e Avaliação de Tecnologias em Saúde

Naturally occurring radioactive materials: a method for assessing the risk of exposure

Naturally Occurring Radioactive Materials (NORM) are materials that are found naturally in the environment and contain radioactive isotopes that can cause negative effects on the health of workers who manipulate them. Present in underground work like mining and tunnel construction in granite zones, these materials are difficult to identify and characterize without appropriate equipment for risk evaluation. The assessing methods were exemplified with a case study applied to the handling and processing of phosphoric rock where one found significant amounts of radioactive isotopes and consequently elevated radon concentrations in enclosed spaces containing these materials. © 2015 Taylor & Francis Group, London.

Susceptibilidade genética para cancro da mama

RESUMO: O cancro da mama é a patologia oncológica mais frequente nas mulheres sendo o responsável pela maior taxa de mortalidade por cancro no sexo feminino. Contudo, as causas inerentes a esta patologia permanecem por esclarecer. Nos últimos anos tem-se verificado que o risco para patologia neoplásica depende de factores ambientais e genéticos, estando estes últimos associados à variabilidade genética inter-individual. Polimorfismos genéticos em genes envolvidos no metabolismo de hormonas sexuais, de cancerígenos ambientais e na reparação da lesão genética, são potenciais candidatos a estarem associados à susceptibilidade individual para esta patologia. Assim, neste trabalho desenvolveram-se estudos de associação caso-controlo na população Portuguesa, com vista a avaliar-se o papel atribuído aos polimorfismos na susceptibilidade para cancro da mama. Foram seleccionados polimorfismos em genes envolvidos em diferentes vias mecanicistas: destoxificação de cancerígenos, metabolismo de estrogénios, reparação por excisão de bases, reparação por excisão de nucleótidos, reparação mismatch e reparação por recombinação homóloga. Os resultados obtidos revelaram associação entre os seguintes polimorfismos e a susceptibilidade individual para cancro da mama: os dois SNPs estudados no gene XRCC1 (Arg194Trp e Arg399Gln) e o SNP no gene XRCC3 (Thr241Met) após estratificação pelo status menopausico. Mediante estratificação por status de amamentação os SNPs identificados nos genes MnSOD (Val16Ala) e XRCC2 (Arg118His); um SNP no gene MLH3 (Leu844Pro), e por fim como resultado de interacção gene-gene as interacções descritas por MSH3 Ala1045Thr/MSH6 Gly39Glu e MSH4 Ala97Thr/MLH3 Leu844Pro. Os resultados obtidos e apresentados na presente dissertação, revelam que o estudo de polimorfismos pode representar um papel determinante na etiologia do cancro da mama. No entanto, mais estudos envolvendo estes mesmos polimorfismos em populações casuisticamente superiores serão uma mais-valia nos estudos de associação para esta neoplasia. Adicionalmente, a utilização da metodologia de Pools de DNA, poderá ser uma ferramenta útil na pré-selecção dos polimorfismos mais relevantes a estudar, na medida em que permite estimar a frequência alélica de cada SNP numa determinada população.-----------------------------------ABSTRACT: Breast cancer is the most common form of cancer among women, being the responsible for the highest mortality rate from cancer among the female sex. However, the main causes related to this pathology remain unclear. The risk of neoplasic disease has been connected with genetic and environmental factors. In fact, genes and the environment share the stage for most, if not all, common non-familial cancers, and are related to individual susceptibility. Genetic polymorphisms identified in genes encoding enzymes involved in estrogen metabolism, xenobiotics and DNA repair pathways are believed to be candidates for associations with breast cancer. Therefore, it was our intention to develop case-control studies among the Portuguese population, in order to evaluate the potential role of several genetic polymorphisms in breast cancer susceptibility. We selected polymorphisms in genes involved in different pathways: carcinogenic detoxification, estrogen metabolism, base excision repair, nucleotide excision repair, mismatch repair and double strand break repair by homologous recombination. The results obtained revealed potential associations between some polymorphisms studied and individual susceptibility to breast cancer. Regarding this fact, our results suggest the potential involvement of two XRCC1 gene polymorphisms (Arg194Trp and Arg399Gln) and XRCC3 gene polymorphism (Thr241Met) after stratification to menopausal status and after stratification to breastfeeding status an association of MnSOD gene polymorphism (Val16Ala) and XRCC2 (Arg188His) with the disease. The SNP identified in MLH3 gene (Leu844Pro), and the interaction gene-gene described by MSH3 Ala1045Thr/MSH6 Gly39Glu and MSH4 Ala97Thr/MLH3 Leu844Pro were also related to breast cancer susceptibility. The results shown in the present dissertation have revealed the potential role of polymorphisms in breast cancer etiology. However, further studies will be needed with larger populations to confirm these results. Additionally, the use of DNA pools methodology, as a pre-selection tool, could allow the identification of the most relevant polymorphisms to be studied, estimating the allelic frequency of each SNPs in different populations.

Risk Acceptance in the Furniture Sector: Analysis of Acceptance Level and Relevant Influence Factors

Risk acceptance has been broadly discussed in relation to hazardous risk activities and/or technologies. A better understanding of risk acceptance in occupational settings is also important; however, studies on this topic are scarce. It seems important to understand the level of risk that stakeholders consider sufficiently low, how stakeholders form their opinion about risk, and why they adopt a certain attitude toward risk. Accordingly, the aim of this study is to examine risk acceptance in regard to occupational accidents in furniture industries. The safety climate analysis was conducted through the application of the Safety Climate in Wood Industries questionnaire. Judgments about risk acceptance, trust, risk perception, benefit perception, emotions, and moral values were measured. Several models were tested to explain occupational risk acceptance. The results showed that the level of risk acceptance decreased as the risk level increased. High-risk and death scenarios were assessed as unacceptable. Risk perception, emotions, and trust had an important influence on risk acceptance. Safety climate was correlated with risk acceptance and other variables that influence risk acceptance. These results are important for the risk assessment process in terms of defining risk acceptance criteria and strategies to reduce risks.

Defining risk acceptance criteria in occupational settings: A case study in the furniture industrial sector

The use of appropriate acceptance criteria in the risk assessment process for occupational accidents is an important issue but often overlooked in the literature, particularly when new risk assessment methods are proposed and discussed. In most cases, there is no information on how or by whom they were defined, or even how companies can adapt them to their own circumstances. Bearing this in mind, this study analysed the problem of the definition of risk acceptance criteria for occupational settings, defining the quantitative acceptance criteria for the specific case study of the Portuguese furniture industrial sector. The key steps to be considered in formulating acceptance criteria were analysed in the literature review. By applying the identified steps, the acceptance criteria for the furniture industrial sector were then defined. The Cumulative Distribution Function (CDF) for the injury statistics of the industrial sector was identified as the maximum tolerable risk level. The acceptable threshold was defined by adjusting the CDF to the Occupational, Safety & Health (OSH) practitioners’ risk acceptance judgement. Adjustments of acceptance criteria to the companies’ safety cultures were exemplified by adjusting the Burr distribution parameters. An example of a risk matrix was also used to demonstrate the integration of the defined acceptance criteria into a risk metric. This work has provided substantial contributions to the issue of acceptance criteria for occupational accidents, which may be useful in overcoming the practical difficulties faced by authorities, companies and experts.

Exposure to polycyclic aromatic hydrocarbons and assessment of potential risks in preschool children

As children represent one of the most vulnerable groups in society, more information concerning their exposure to health hazardous air pollutants in school environments is necessary. Polycyclic aromatic hydrocarbons (PAHs) have been identified as priority air pollutants due to their mutagenic and carcinogenic properties that strongly affect human health. Thus, this work aims to characterize levels of 18 selected PAHs in preschool environment, and to estimate exposure and assess the respective risks for 3–5-year-old children (in comparison with adults). Gaseous PAHs (mean of 44.5 ± 12.3 ng m−3) accounted for 87 % of the total concentration (ΣPAHs) with 3–ringed compounds being the most abundant (66 % of gaseous ΣPAHs). PAHs with 5 rings were the most abundant ones in the particulate phase (PM; mean of 6.89 ± 2.85 ng m−3) being predominantly found in PM1 (78 % particulate ΣPAHs). Overall child exposures to PAHs were not significantly different between older children (4–5 years old) and younger ones (3 years old). Total carcinogenic risks due to particulate-bound PAHs indoors were higher than outdoor ones. The estimated cancer risks of both preschool children and the staff were lower than the United States Environmental Protection Agency (USEPA) threshold of 10−6 but slightly higher than WHO-based guideline.

Is It Possible to Simplify Risk Stratification Scores for Patients with ST-Segment Elevation Myocardial Infarction Undergoing Primary Angioplasty?

INTRODUCTION: There are several risk scores for stratification of patients with ST-segment elevation myocardial infarction (STEMI), the most widely used of which are the TIMI and GRACE scores. However, these are complex and require several variables. The aim of this study was to obtain a reduced model with fewer variables and similar predictive and discriminative ability. METHODS: We studied 607 patients (age 62 years, SD=13; 76% male) who were admitted with STEMI and underwent successful primary angioplasty. Our endpoints were all-cause in-hospital and 30-day mortality. Considering all variables from the TIMI and GRACE risk scores, multivariate logistic regression models were fitted to the data to identify the variables that best predicted death. RESULTS: Compared to the TIMI score, the GRACE score had better predictive and discriminative performance for in-hospital mortality, with similar results for 30-day mortality. After data modeling, the variables with highest predictive ability were age, serum creatinine, heart failure and the occurrence of cardiac arrest. The new predictive model was compared with the GRACE risk score, after internal validation using 10-fold cross validation. A similar discriminative performance was obtained and some improvement was achieved in estimates of probabilities of death (increased for patients who died and decreased for those who did not). CONCLUSION: It is possible to simplify risk stratification scores for STEMI and primary angioplasty using only four variables (age, serum creatinine, heart failure and cardiac arrest). This simplified model maintained a good predictive and discriminative performance for short-term mortality.

The Use of Statins in People at Risk of Developing Diabetes Mellitus: Evidence and Guidance for Clinical Practice

Reducing low-density lipoprotein cholesterol (LDL-C) levels using statins is associated with significant reductions in cardiovascular (CV) events in a wide range of patient populations. Although statins are generally considered to be safe, recent studies suggest they are associated with an increased risk of developing Type 2 diabetes (T2D). This led the US Food and Drug Administration (FDA) to change their labelling requirements for statins to include a warning about the possibility of increased blood sugar and HbA1c levels and the European Medicines Agency (EMA) to issue guidance on a small increased risk of T2D with the statin class. This review examines the evidence leading to these claims and provides practical guidance for primary care physicians on the use of statins in people with or at risk of developing T2D. Overall, evidence suggests that the benefits of statins for the reduction of CV risk far outweigh the risk of developing T2D, especially in individuals with higher CV risk. To reduce the risk of developing T2D, physicians should assess all patients for T2D risk prior to starting statin therapy, educate patients about their risks, and encourage risk-reduction through lifestyle changes. Whether some statins are more diabetogenic than others requires further study. Statin-treated patients at high risk of developing T2D should regularly be monitored for changes in blood glucose or HbA1c levels, and the risk of conversion from pre-diabetes to T2D should be reduced by intensifying lifestyle changes. Should a patient develop T2D during statin treatment, physicians should continue with statin therapy and manage T2D in accordance with relevant national guidelines.

Validation of Two US Risk Scores for Percutaneous Coronary Intervention in a Single-Center Portuguese Population of Patients with Acute Coronary Syndrome

INTRODUCTION: New scores have been developed and validated in the US for in-hospital mortality risk stratification in patients undergoing coronary angioplasty: the National Cardiovascular Data Registry (NCDR) risk score and the Mayo Clinic Risk Score (MCRS). We sought to validate these scores in a European population with acute coronary syndrome (ACS) and to compare their predictive accuracy with that of the GRACE risk score. METHODS: In a single-center ACS registry of patients undergoing coronary angioplasty, we used the area under the receiver operating characteristic curve (AUC), a graphical representation of observed vs. expected mortality, and net reclassification improvement (NRI)/integrated discrimination improvement (IDI) analysis to compare the scores. RESULTS: A total of 2148 consecutive patients were included, mean age 63 years (SD 13), 74% male and 71% with ST-segment elevation ACS. In-hospital mortality was 4.5%. The GRACE score showed the best AUC (0.94, 95% CI 0.91-0.96) compared with NCDR (0.87, 95% CI 0.83-0.91, p=0.0003) and MCRS (0.85, 95% CI 0.81-0.90, p=0.0003). In model calibration analysis, GRACE showed the best predictive power. With GRACE, patients were more often correctly classified than with MCRS (NRI 78.7, 95% CI 59.6-97.7; IDI 0.136, 95% CI 0.073-0.199) or NCDR (NRI 79.2, 95% CI 60.2-98.2; IDI 0.148, 95% CI 0.087-0.209). CONCLUSION: The NCDR and Mayo Clinic risk scores are useful for risk stratification of in-hospital mortality in a European population of patients with ACS undergoing coronary angioplasty. However, the GRACE score is still to be preferred.

Enhancement of an implemented rating model and impact on existing risk management processes: A hands-on approach from financial supplier risk management within the automotive industry

The purpose of this paper is to conduct a methodical drawback analysis of a financial supplier risk management approach which is currently implemented in the automotive industry. Based on identified methodical flaws, the risk assessment model is further developed by introducing a malus system which incorporates hidden risks into the model and by revising the derivation of the most central risk measure in the current model. Both methodical changes lead to significant enhancements in terms of risk assessment accuracy, supplier identification and workload efficiency.

Assessing fraud risk of selecção, contratação e manutenção de fornecedores process of Sonae Investimentos

The present Work Project (WP) is the result of Sonae’s concern with fraud risk, seeking to implement a method that formally describes and evaluates it in its various forms. In a context of limited human, capital, time and tools’ resources, the Internal Audit (IA) department of the company developed a framework to raise the awareness of top management and identify which processes of its value chain present a higher level of exposure to fraud, with the purpose of redirecting attention to those and prioritizing the creation of new mechanisms to monitor its KPIs’ dynamics.

Defining risk acceptance criteria in occupational settings: A case study in the furniture industrial sector

The use of appropriate acceptance criteria in the risk assessment process for occupational accidents is an important issue but often overlooked in the literature, particularly when new risk assessment methods are proposed and discussed. In most cases, there is no information on how or by whom they were defined, or even how companies can adapt them to their own circumstances. Bearing this in mind, this study analysed the problem of the definition of risk acceptance criteria for occupational settings, defining the quantitative acceptance criteria for the specific case study of the Portuguese furniture industrial sector. The key steps to be considered in formulating acceptance criteria were analysed in the literature review. By applying the identified steps, the acceptance criteria for the furniture industrial sector were then defined. The Cumulative Distribution Function (CDF) for the injury statistics of the industrial sector was identified as the maximum tolerable risk level. The acceptable threshold was defined by adjusting the CDF to the Occupational, Safety & Health (OSH) practitioners’ risk acceptance judgement. Adjustments of acceptance criteria to the companies’ safety cultures were exemplified by adjusting the Burr distribution parameters. An example of a risk matrix was also used to demonstrate the integration of the defined acceptance criteria into a risk metric. This work has provided substantial contributions to the issue of acceptance criteria for occupational accidents, which may be useful in overcoming the practical difficulties faced by authorities, companies and experts.

Risk acceptance in the furniture sector: Analysis of acceptance level and relevant influence factors

Risk acceptance has been broadly discussed in relation to hazardous risk activities and/or technologies. A better understanding of risk acceptance in occupational settings is also important; however, studies on this topic are scarce. It seems important to understand the level of risk that stakeholders consider sufficiently low, how stakeholders form their opinion about risk, and why they adopt a certain attitude toward risk. Accordingly, the aim of this study is to examine risk acceptance in regard to occupational accidents in furniture industries. The safety climate analysis was conducted through the application of the Safety Climate in Wood Industries questionnaire. Judgments about risk acceptance, trust, risk perception, benefit perception, emotions, and moral values were measured. Several models were tested to explain occupational risk acceptance. The results showed that the level of risk acceptance decreased as the risk level increased. High-risk and death scenarios were assessed as unacceptable. Risk perception, emotions, and trust had an important influence on risk acceptance. Safety climate was correlated with risk acceptance and other variables that influence risk acceptance. These results are important for the risk assessment process in terms of defining risk acceptance criteria and strategies to reduce risks.

Development of a model for occupational risk acceptance criteria definition in industrial settings

Doctoral Dissertation for PhD degree in Industrial and Systems Engineering