Effect of long-range Coulomb interaction on shot-noise suppression in ballistic transport

We present a microscopic analysis of shot-noise suppression due to long-range Coulomb interaction in semiconductor devices under ballistic transport conditions. An ensemble Monte Carlo simulator self-consistently coupled with a Poisson solver is used for the calculations. A wide range of injection-rate densities leading to different degrees of suppression is investigated. A sharp tendency of noise suppression at increasing injection densities is found to scale with a dimensionless Debye length related to the importance of space-charge effects in the structure.

Asymptotic analysis of stock price densities and implied volatilities in mixed stochastic models Â

In this paper, we obtain sharp asymptotic formulas with error estimates for the Mellin con- volution of functions de ned on (0;1), and use these formulas to characterize the asymptotic behavior of marginal distribution densities of stock price processes in mixed stochastic models. Special examples of mixed models are jump-di usion models and stochastic volatility models with jumps. We apply our general results to the Heston model with double exponential jumps, and make a detailed analysis of the asymptotic behavior of the stock price density, the call option pricing function, and the implied volatility in this model. We also obtain similar results for the Heston model with jumps distributed according to the NIG law.

Rapid increase in incidence of breast ductal cancer in situ in Girona, Spain 1983-2007

Introduction: The aim of this study was to describe breast ductal cancer in situ (DCIS) incidence trends in women in the Girona province during a period of 25 years. The influence of age, use of mammography and implementation of the breast cancer screening programs was explored. Incidence of subsequent invasive breast cancers (IBC) and DCIS treatment was also considered. Materials and Methods: Cases diagnosed with primary pure DCIS (n=416) during 1983-2007 were extracted from the population-based Girona Cancer Registry. The estimated annual percent change was estimated using joinpoint analysis. Results: DCIS incidence showed a sharp rise until 1998, followed by a less marked upward trend. Among women aged 50-69 the increase was particularly important between 1992 and in 1996, reflecting the spread in mammography use. Conclusion: The upward trend of DCIS was mainly related to an increase in mammography use either opportunistic or as a result of screening implementation

Size Effect and Notch Size Effect in Metal Fatigue

It is a well known phenomenon that the constant amplitude fatigue limit of a large component is lower than the fatigue limit of a small specimen made of the same material. In notched components the opposite occurs: the fatigue limit defined as the maximum stress at the notch is higher than that achieved with smooth specimens. These two effects have been taken into account in most design handbooks with the help of experimental formulas or design curves. The basic idea of this study is that the size effect can mainly be explained by the statistical size effect. A component subjected to an alternating load can be assumed to form a sample of initiated cracks at the end of the crack initiation phase. The size of the sample depends on the size of the specimen in question. The main objective of this study is to develop a statistical model for the estimation of this kind of size effect. It was shown that the size of a sample of initiated cracks shall be based on the stressed surface area of the specimen. In case of varying stress distribution, an effective stress area must be calculated. It is based on the decreasing probability of equally sized initiated cracks at lower stress level. If the distribution function of the parent population of cracks is known, the distribution of the maximum crack size in a sample can be defined. This makes it possible to calculate an estimate of the largest expected crack in any sample size. The estimate of the fatigue limit can now be calculated with the help of the linear elastic fracture mechanics. In notched components another source of size effect has to be taken into account. If we think about two specimens which have similar shape, but the size is different, it can be seen that the stress gradient in the smaller specimen is steeper. If there is an initiated crack in both of them, the stress intensity factor at the crack in the larger specimen is higher. The second goal of this thesis is to create a calculation method for this factor which is called the geometric size effect. The proposed method for the calculation of the geometric size effect is also based on the use of the linear elastic fracture mechanics. It is possible to calculate an accurate value of the stress intensity factor in a non linear stress field using weight functions. The calculated stress intensity factor values at the initiated crack can be compared to the corresponding stress intensity factor due to constant stress. The notch size effect is calculated as the ratio of these stress intensity factors. The presented methods were tested against experimental results taken from three German doctoral works. Two candidates for the parent population of initiated cracks were found: the Weibull distribution and the log normal distribution. Both of them can be used successfully for the prediction of the statistical size effect for smooth specimens. In case of notched components the geometric size effect due to the stress gradient shall be combined with the statistical size effect. The proposed method gives good results as long as the notch in question is blunt enough. For very sharp notches, stress concentration factor about 5 or higher, the method does not give sufficient results. It was shown that the plastic portion of the strain becomes quite high at the root of this kind of notches. The use of the linear elastic fracture mechanics becomes therefore questionable.

Characterization of Unye bentonite after treatment with sulfuric acid

Unye bentonite was found to consist predominantly of a dioctahedral smectite along with quartz, tridymite, cristobalite, and minor fractions of feldspar and anatase. A considerable amount of Al was retained as a constituent in acid-resistant impurities following the decomposition of the montmorillonite via acid treatment at an acid/clay ratio of 0.4. These impurities were mesoporous with a maximum surface area of 303.9±0.4 m² g-1. A sharp decrease in the d001 lattice spacing of the montmorillonite to 15.33 Å reflected the reduction of the crystallinity in the activated products. In addition, the increase in the ease with which newly formed hydroxyl groups were lost paralleled the severity of the acid treatment.

Distribuição dos Hydrozoa até agora conhecidos nas costas do Brasil

This work was done with the aim of computing all the species of Hydrozoa (Siphonophora excluded) that have been collected on the Brazilian coast, or in the pelagial, near the coast (some of the "Meteor" Stations). Nutting's (1900, 1904, 1915) and Mayer's (1910) monographs were taken as starting points and later papers and the Zoological Record used to check posterior findings. As a whole, 116 different valid names, among species and forms, have been mentioned from the Brazilian coast, distributed among 60 genera. Of the 116 species, 82 are represented by hydropolyps, 30 by hydromedusae (11 of which belong to the Trachylina and therefore lack a polypoid generation) and finally, by 4 species of which are known both polypoid and medusoid generations. The subdivision of the coast has been made at random, on account of the scarcity of the findings, except for the best known district, that goes from the latitude of Vitoria (State of Espirito Santo, at about 20ºlat.S.) to the bay of Santos (State of São Paulo, about 24ºlat.S.). The latitude of Cabo Frio (23ºlat.S.) was considered as a possible natural barrier, and the results of the global counting of the distribution of the hydropolyps North and South of 23ºlat.S. is the following: 29 species are known only North of Cabo Frio, 26 only from the same latitude (see direction of the coast, along parallel 23ºS.) or further South and 28 species are known both North and South of the coast (of these, 5 species are "cosmopolitan"). Therefore it seems quite possible that Cabo Frio really is a barrier to the distribution of 55 species. 26 species are endemic to the Brazilian coast, of these, only 5 are found both North and South of the Cape, while-14 are found only North and 7 only South. No studies can be done, on the bathymetric distribution in relation to the latitude. These results must be considered as provisory since more extensive researches will probably alter these figures. However, I believe that they are significative as a mean index of the condition of the hydrozoan fauna of the Brazilian coast. A tentative working hypothesis is presented as to the possible factors that confer such a zoogeographic importance to the region of Cabo Frio, a fact that has been foreseen by Ekman (1935, p. 73). Geographic position, currents, latitude and nature of the sea bottom between the continent and the oceanic island of Trindade have been taken in consideration, and all of them seem to be possible eficient factors of separation. Furthermore, according to the data obtained by the "Meteor" Expedition in July 2, 1926, at station 164 (23º8'lat.S. - 42º5'long.W.) and station 165 (23º35'lat.S. - 40º52'long.W.) and by what is known by hearsay and local experience of the region (exact continued study is urgently needed), it seems possible that, off from the sharp curve that the coast has at Cabo Frio, there may be an irregularity of the general scheme of the current and local upwelling may be present that would explain the local low temperature, low salinity and high density of the superficial layers as well as the abundance of fishes; these factors might contribute towards the establishement of a zoogeographical barrier. Further work is needed and nothing more than an hypothesis can be presented for the moment.

Kustannukset ja kannattavuus RFID- ja toiminnanohjausjärjestelmien integrointiprojektissa

Maailmantalouden jyrkkä lasku vuonna 2008 ajoi yritykset säästökuurille. Säästöjä pyritään saamaan esimerkiksi automatisoimalla toimintoja. Yksi tapa luoda kustannussäästöjä on käyttää RFIDteknologiaa varastoinnin toimien tehostukseen. Tämän tutkimuksen pääasiallisena tavoitteena on ollut rakentaa yksinkertainen laskentamalli RFID- ja toiminnanohjausjärjestelmien integrointiprojektin kustannusten ja kannattavuuden laskemiseen. Toisena tavoitteena on ollut selvittää, mitkä tekijät vaikuttavat investoinnin kannattavuuteen. Tutkimus rajattiin tarkastelemaan varaston saapuvan tavaran vastaanoton prosessia ja sen toimintojen automatisointia RFID-järjestelmän avulla. Laskentamalli muodostuu kolmesta osasta: investoinnin kokonaiskustannusten arvioinnista, investoinnista saatavien kustannussäästöjen arvioinnista ja kannattavuuslaskelmista. Investointien kokonaiskustannusten arviointia varten rakennettiin luettelo yleisimmistä kustannuslajeista. Investoinnista saatavien kustannussäästöjen arviointi tehtiin analysoimalla nykyprosesseja ja etsimällä niistä toimintoja, jotka tehostuvat RFID-järjestelmän avulla. Varsinaisina kannattavuuslaskentamenetelminä käytettiin investoinnin takaisinmaksuajan menetelmää sekä pääoman tuottoasteen menetelmää. Tutkimuksen tuloksena todettiin rakennetun laskentamallin soveltuvan hyvin investoinnin kustannusten ja kannattavuuden arviointiin. Samalla havaittiin yrityksen toimialan, saapuvien lähetysten määrän ja lähetysten rivimäärän vaikuttavan merkittävästi RFID- jatoiminnanohjausjärjestelmän integrointiprojektin kannattavuuteen.

Electrometric studies on formation of cerium vanadates as a function of pH

The precise nature of the reaction between nitric acid and sodium ortho-vanadate solutions has been studied by means of electrometric techniques involving potentiometric and conductometric titrations. The well defined inflections and breaks in the titration curves confirm the existence of the anions, pyro-V2O7(4-), meta-VO3- and poly-H2V10O28(4-) corresponding to the ratios of VO4(3-):H+ as 1:1, 1:2 and 1:2.6 in the neighborhood of pH 10.5, 7.4 and 3.6, respectively. The interaction of cerium(III) nitrate with sodium vanadate solutions, at specific pH levels 12.4, 10.5, 7.4 and 3.6 was also studied by potentiometric and conductometric titrations between the reactants. The end-points obtained from the sharp inflections in the titration curves provide definite evidence for the formation and precipitation of cerium ortho-Ce2O3.V2O5, pyro-2Ce2O3.3V2O5 and meta-Ce2O3.3V2O5 vanadates in the neighborhood of pH 7.4, 6.2 and 4.8, respectively. Analytical investigations on the precipitates formed confirm the results of the electrometric study.

Diameter structure of stratum and ecological groups of a Semideciduous Forest area in Dionísio-MG

The objective of this study was to obtain homogeneous groups of species and information on their density, dominance and volume, in terms of ecological group and diameter structure of an area of Submontane Semideciduous forest (Mata do Mumbaça) in Dionísio, MG. This work was conducted with data of the diameter distribution per species from floristic and phytosociological (Mata do Mumbaça) survey of 120 plots with 10 x 10 m each one. The 120 plots were contiguous and corresponding to a total sample area of 12,000 m² distributed over the topographic units (Low Ramp, Lower Slope, Upper Slope and Hill Top). The topographic units Low Ramp, Lower Slope and Upper Slope were in the middle stage of succession as they presented incipient stratification into two strata (canopy and understory) i.e. canopy ranging from 5 to 12 m high. However, the stratum Hill Top was classified as intermediate/advanced succession because it had a total height equal to or greater than 12 m. The distribution of individual trees of the four strata on diameter classes showed a typical J-inverted pattern that is, high concentration of individuals in smaller diameter classes and a sharp reduction towards the larger classes. In relation to absolute dominance and total volume of species, the ecological group that stood out in the four strata (Low Ramp, Lower Slope, Upper Slope and Hill Top) was the initial secondary, which were in the intermediate stage of secondary, rapidly developing into the mature phase.

Energiapuun haketuksen ja murskauksen kustannukset

Energiapuun tuotannossa puu on hienonnettava kuljettimille ja kattilaan sopivaan kokoon. Tämä tehdään Suomessa yleensä joko metsätien varressa välivarastolla, keskitetyssä terminaalissa tai voimalaitoksella. Puu hienonnetaan joko terävillä terillä hakettamalla tai tylpemmillä työkaluilla murskaamalla. Hakkeessa on vähemmän käsittelyä haittaavia pitkiä tikkuja ja sen valmistamiseen tarvittava energia on hiukan pienempi kuin murskaimilla. Viimeksi mainitulla on merkitystä lähinnä karsittua puuta haketettaessa. Murskain puolestaan sallii enemmän epäpuhtauksia raaka-aineessa, joten esimerkiksi kantoja käsitellään vain murskaimilla. Tässä tarkastellaan erityisesti pienpuun haketuksen ja murskauksen kustannuksia. Pienpuuta saadaan nuoren metsän kunnostuksista ja ensiharvennuksista. Se voi olla joko karsimatonta kokopuuta tai karsittua rankaa. Kokonaiskustannukset pienpuun haketukselle tai murskaukselle ovat tämän tutkimuksen mukaan välivarastolla noin 3,4 euroa/MWh ja terminaalilla tai voimalaitoksella noin 2 euroa/MWh. Pääomakustannukset ovat pienpuulla tavallisesti 1-1,2 euroa/MWh, keskitetyllä terminaalilla toimittaessa noin kolmanneksen vähemmän, jos pääomalle asetetaan 10% tuottovaatimus. Työvoimakustannukset ovat 30-80 snt/MWh varaston ja laitteen koosta riippuen, käyttöenergia dieselmoottoria käytettäessä noin 50 snt/MWh, sähkömoottorilla noin 30 snt/MWh. Muut kulut, mm. huolto, ovat yhteensä 40-80 snt/MWh. Energiapuun hankinnan kokonaiskustannuksista raaka-aineen hienontamisen osuus on 10-30% puutavaran lajista ja käytetystä työmenetelmästä riippuen. Terminaaleilla ja voimalaitoksilla toimittaessa on usein kiinnitettävä huomiota melun- ja pölyntorjuntaan. Muun muassa näistä syistä saattaa kiinteä, sähkökäyttöinen murska olla sopiva sellaisiin kohteisiin, joissa käsiteltävät määrät ovat suuria ja toiminta pysyvää. Melun ja pölyn kunnollinen torjunta vaatii suuria rakenteita, joita on vaikea yhdistää liikuteltaviin laitteisiin.

Protocolo eletrônico para coleta estruturada de dados clínicos para pacientes pediátricos em terapia nutricional utilizando o SINPE© (Sistema Integrado de Protocolos Eletrônicos)

OBJETIVO: Criar uma base de dados clínicos de terapia nutricional de pacientes pediátricos, informatizar os dados transformando-os em protocolo eletrônico, criar um meio de integração com outros centros médicos a fim de aplicar a base de dados de maneira multicêntrica. MÉTODO: a base de dados foi desenvolvida a partir de busca na literatura médica, em livros-texto e artigos científicos sobre terapia nutricional em pediatria. Inicialmente foi organizado um protocolo mestre, e posteriormente o mesmo foi dividido em dois protocolos específicos, um de admissão e outro de evolução do paciente. A informatização da base de dados foi realizada mediante programa de computador, desenvolvido em linguagem C# (C - Sharp), pelo laboratório eletrônico de pesquisas clínicas do Hospital de Clínicas da Universidade Federal do Paraná. RESULTADOS: o protocolo eletrônico desenvolvido permite armazenar informações clínicas, laboratoriais e complementares de pacientes pediátricos em terapia nutricional. Após a inclusão hierarquizada de todos os itens, foram distribuídos 6694 itens no protocolo mestre, sendo 392 no item Admissão e 6302 em Evolução. CONCLUSÃO: a criação de uma base de coleta de dados de pacientes pediátricos em terapia nutricional foi possível, a informatização da mesma foi factível e existe a possibilidade de integração de diferentes centros para realização de estudos multicêntricos.

Prevalence of radiographic markers of femoroacetabular impingement in asymptomatic adults

OBJECTIVE: to determine the prevalence of radiographic signs of femoroacetabular impingement (FAI) in asymptomatic adults and correlate them with data from physical examinations. METHODS: We conducted a cross-sectional study with 82 asymptomatic volunteers, 164 hips, between 40 and 60 years of age, selected by convenience. They were submitted to anamnesis and clinical examination of the hip, anteroposterior (AP) pelvis radiographs with three incidences, Dunn 45&#176; and Lequesne false profile of each hip, to measure the variables. We measured the alpha angle, anterior offset of the femoral neck, cervical diaphyseal angle, CE angle of Wiberg, acetabular index, Sharp angle, and the crossing, ischial spine and posterior wall signs. RESULTS: our sample consisted of 66% women, mean age of 50.4 years. The average alpha angle was 45.10&#176;, SD=8.6. One quarter of the hips showed alpha angle greater than or equal to 50&#176;; among men the prevalence was 34%, and among women, 11%. We found indicative radiographic signs of femoroacetabular impingement in 42.6% of hips, whether femoral or acetabular, and the increased alpha angle was related to the decrease in hip internal rotation (p<0.001). CONCLUSION: the radiographic findings of femoroacetabular impingement in asymptomatic patients were frequent in the studied sample. The increase in alpha angle was associated with decreased internal rotation.

Lectin histochemical aspects of the ovarian lamellae epithelium of Genypterus blacodes (Schneider, 1801)

The composition and distribution of the glycoconjugates (GCs) secreted by the epithelium of ovarian lamellae with reference to the reproductive biology of Genypterus blacodes (Schneider, 1801) through lectin hi stochemistry is here discussed. In this species, the epithelial cells that line the ovarian cavity presented sharp morphological variations along the reproductive cycle related to the mucus secretion that accompanies oocyte ma turation. During sp awning season, residues of mannose and N-acetylglucosamine were detected in the glycocalyx of those cells using lectinhistochemistry. N- acetylgalactosamine and fucose were also observed in the same zone. The greatest variations in the lectinhistochemical pattern were found in the apical cytoplasm composition in comparison to the basal zone of the cells. The results of the present study were discussed by comparing their possible functional implications.

Hyperbolic type metrics and distortion of quasiconformal map pings

This Ph.D. thesis consists of four original papers. The papers cover several topics from geometric function theory, more specifically, hyperbolic type metrics, conformal invariants, and the distortion properties of quasiconformal mappings. The first paper deals mostly with the quasihyperbolic metric. The main result gives the optimal bilipschitz constant with respect to the quasihyperbolic metric for the M¨obius self-mappings of the unit ball. A quasiinvariance property, sharp in a local sense, of the quasihyperbolic metric under quasiconformal mappings is also proved. The second paper studies some distortion estimates for the class of quasiconformal self-mappings fixing the boundary values of the unit ball or convex domains. The distortion is measured by the hyperbolic metric or hyperbolic type metrics. The results provide explicit, asymptotically sharp inequalities when the maximal dilatation of quasiconformal mappings tends to 1. These explicit estimates involve special functions which have a crucial role in this study. In the third paper, we investigate the notion of the quasihyperbolic volume and find the growth estimates for the quasihyperbolic volume of balls in a domain in terms of the radius. It turns out that in the case of domains with Ahlfors regular boundaries, the rate of growth depends not merely on the radius but also on the metric structure of the boundary. The topic of the fourth paper is complete elliptic integrals and inequalities. We derive some functional inequalities and elementary estimates for these special functions. As applications, some functional inequalities and the growth of the exterior modulus of a rectangle are studied.