Metabonomic studies to assess beer quality and stability

The work reported in this thesis aimed at applying the methodology known as metabonomics to the detailed study of a particular type of beer and its quality control, with basis on the use of multivariate analysis (MVA) to extract meaningful information from given analytical data sets. In Chapter 1, a detailed description of beer is given considering the brewing process, main characteristics and typical composition of beer, beer stability and the commonly used analytical techniques for beer analysis. The fundamentals of the analytical methods employed here, namely nuclear magnetic resonance (NMR) spectroscopy, gas-chromatography-mass spectrometry (GC-MS) and mid-infrared (MIR) spectroscopy, together with the description of the metabonomics methodology are described shortly in Chapter 2. In Chapter 3, the application of high resolution NMR to characterize the chemical composition of a lager beer is described. The 1H NMR spectrum obtained by direct analysis of beer show a high degree of complexity, confirming the great potential of NMR spectroscopy for the detection of a wide variety of families of compounds, in a single run. Spectral assignment was carried out by 2D NMR, resulting in the identification of about 40 compounds, including alcohols, amino acids, organic acids, nucleosides and sugars. In a second part of Chapter 3, the compositional variability of beer was assessed. For that purpose, metabonomics was applied to 1H NMR data (NMR/MVA) to evaluate beer variability between beers from the same brand (lager), produced nationally but differing in brewing site and date of production. Differences between brewing sites and/or dates were observed, reflecting compositional differences related to particular processing steps, including mashing, fermentation and maturation. Chapter 4 describes the quantification of organic acids in beer by NMR, using different quantitative methods: direct integration of NMR signals (vs. internal reference or vs. an external electronic reference, ERETIC method) and by quantitative statistical methods (using the partial least squares (PLS) regression) were developed and compared. PLS1 regression models were built using different quantitative methods as reference: capillary electrophoresis with direct and indirect detection and enzymatic essays. It was found that NMR integration results generally agree with those obtained by the best performance PLS models, although some overestimation for malic and pyruvic acids and an apparent underestimation for citric acid were observed. Finally, Chapter 5 describes metabonomic studies performed to better understand the forced aging (18 days, at 45 ºC) beer process. The aging process of lager beer was followed by i) NMR, ii) GC-MS, and iii) MIR spectroscopy. MVA methods of each analytical data set revealed clear separation between different aging days for both NMR and GC-MS data, enabling the identification of compounds closely related with the aging process: 5-hydroxymethylfurfural (5-HMF), organic acids, γ-amino butyric acid (GABA), proline and the ratio linear/branched dextrins (NMR domain) and 5-HMF, furfural, diethyl succinate and phenylacetaldehyde (known aging markers) and, for the first time, 2,3-dihydro-3,5-dihydroxy-6-methyl-4(H)-pyran-4-one xii (DDMP) and maltoxazine (by GC-MS domain). For MIR/MVA, no aging trend could be measured, the results reflecting the need of further experimental optimizations. Data correlation between NMR and GC-MS data was performed by outer product analysis (OPA) and statistical heterospectroscopy (SHY) methodologies, enabling the identification of further compounds (11 compounds, 5 of each are still unassigned) highly related with the aging process. Data correlation between sensory characteristics and NMR and GC-MS was also assessed through PLS1 regression models using the sensory response as reference. The results obtained showed good relationships between analytical data response and sensory response, particularly for the aromatic region of the NMR spectra and for GC-MS data (r > 0.89). However, the prediction power of all built PLS1 regression models was relatively low, possibly reflecting the low number of samples/tasters employed, an aspect to improve in future studies.

Regional and urban air quality modelling under a climate change scenario

The better understanding of the interactions between climate change and air quality is an emerging priority for research and policy. Climate change will bring changes in the climate system, which will affect the concentration and dispersion of air pollutants. The main objective of the current study is to assess the impacts of climate change on air quality in 2050 over Portugal and Porto urban area. First, an evaluation and characterization of the air quality over mainland Portugal was performed for the period between 2002 and 2012. The results show that NO2, PM10 and O3 are the critical pollutants in Portugal. Also, the influence of meteorology on O3, NO2 and PM10 levels was investigate in the national main urban areas (Porto and Lisboa) and was verified that O3 has a statistically significant relationship with temperature in most of the components. The results also indicate that emission control strategies are primary regulators for NO2 and PM10 levels. After, understanding the national air quality problems and the influence that meteorology had in the historical air quality levels, the air quality modelling system WRF-CAMx was tested and the required inputs for the simulations were prepared to fulfil the main goal of this work. For the required air quality modelling inputs, an Emission Projections under RCP scenarios (EmiPro-RCP) model was developed to assist the estimation of future emission inventories for GHG and common air pollutants. Also, the current emissions were estimated for Portugal with a higher detailed disaggregation to improve the performance of the air quality simulations. The air quality modelling system WRF/CAMx was tested and evaluated over Portugal and Porto urban area and the results point out that is an adequate tool for the analysis of air quality under climate change. For this purpose, regional simulations of air quality during historical period and future (2045-2050) were conducted with CAMx version 6.0 to evaluate the impacts of simulated future climate and anthropogenic emission projections on air quality over the study area. The climate and the emission projections were produced under the RCP8.5 scenario. The results from the simulations point out, that if the anthropogenic emissions keep the same in 2050, the concentrations of NO2, PM10 and O3 will increase in Portugal. When, besides the climate change effects, is consider the projected anthropogenic emissions the annual mean concentrations of NO2 decrease significantly in Portugal and Porto urban area, and on the contrary the annual mean PM10 concentrations increases in Portugal and decrease in Porto urban area. The O3 results are mainly caused by the reduction of ozone precursors, getting the higher reductions in urban areas and increases in the surrounding areas. All the analysis performed for both simulations for Porto urban area support that, for PM10 and O3, there will be an increase in the occurrence of extreme values, surpassing the annual legislated parameters and having more daily exceedances. This study constitutes an innovative scientific tool to help in future air quality management in order to mitigate future climate change impacts on air quality.

Determinação da qualidade do fruto em citrinos de diferentes modos de produção

Dissertação mest., Agricultura Sustentável, Universidade do Algarve, 2007

Differential Benefit: Preschool Children, Quality of Early Childhood Education Environment and Developmental Gains Important for School Readiness

Thesis (Ph.D.)--University of Washington, 2014

Image quality optimization, via application of contextual contrast sensitivity and discrimination functions

What is the best luminance contrast weighting-function for image quality optimization? Traditionally measured contrast sensitivity functions (CSFs), have been often used as weighting-functions in image quality and difference metrics. Such weightings have been shown to result in increased sharpness and perceived quality of test images. We suggest contextual CSFs (cCSFs) and contextual discrimination functions (cVPFs) should provide bases for further improvement, since these are directly measured from pictorial scenes, modeling threshold and suprathreshold sensitivities within the context of complex masking information. Image quality assessment is understood to require detection and discrimination of masked signals, making contextual sensitivity and discrimination functions directly relevant. In this investigation, test images are weighted with a traditional CSF, cCSF, cVPF and a constant function. Controlled mutations of these functions are also applied as weighting-functions, seeking the optimal spatial frequency band weighting for quality optimization. Image quality, sharpness and naturalness are then assessed in two-alternative forced-choice psychophysical tests. We show that maximal quality for our test images, results from cCSFs and cVPFs, mutated to boost contrast in the higher visible frequencies.

Special Section Guest Editorial: Image/Video Quality and System Performance

Rapid developments in display technologies, digital printing, imaging sensors, image processing and image transmission are providing new possibilities for creating and conveying visual content. In an age in which images and video are ubiquitous and where mobile, satellite, and three-dimensional (3-D) imaging have become ordinary experiences, quantification of the performance of modern imaging systems requires appropriate approaches. At the end of the imaging chain, a human observer must decide whether images and video are of a satisfactory visual quality. Hence the measurement and modeling of perceived image quality is of crucial importance, not only in visual arts and commercial applications but also in scientific and entertainment environments. Advances in our understanding of the human visual system offer new possibilities for creating visually superior imaging systems and promise more accurate modeling of image quality. As a result, there is a profusion of new research on imaging performance and perceived quality.

Optimization of River Water Quality Surveys by Multivariate Analysis of Physicochemical, Bacteriological and Ecotoxicological Data

This study aims to optimize the water quality monitoring of a polluted watercourse (Leça River, Portugal) through the principal component analysis (PCA) and cluster analysis (CA). These statistical methodologies were applied to physicochemical, bacteriological and ecotoxicological data (with the marine bacterium Vibrio fischeri and the green alga Chlorella vulgaris) obtained with the analysis of water samples monthly collected at seven monitoring sites and during five campaigns (February, May, June, August, and September 2006). The results of some variables were assigned to water quality classes according to national guidelines. Chemical and bacteriological quality data led to classify Leça River water quality as “bad” or “very bad”. PCA and CA identified monitoring sites with similar pollution pattern, giving to site 1 (located in the upstream stretch of the river) a distinct feature from all other sampling sites downstream. Ecotoxicity results corroborated this classification thus revealing differences in space and time. The present study includes not only physical, chemical and bacteriological but also ecotoxicological parameters, which broadens new perspectives in river water characterization. Moreover, the application of PCA and CA is very useful to optimize water quality monitoring networks, defining the minimum number of sites and their location. Thus, these tools can support appropriate management decisions.

Effect of combined care nursing on patient satisfaction, staff satisfaction, and quality of care /

This research evaluates the effect of combined care nursing on three outcomes: i) patient satisfaction; ii) staff satisfaction; and iii) quality of care. Oakville-Trafalgar Memorial Hospital was in the early planning stages of changing to combined care nursing from the traditional method of providing separate postpartum and nursery care to mothers and babies. The opportunity existed to evaluate formally the change to combined care. There were three hypotheses to be investigated. Data were collected from four sources: patient surveys, staff surveys, informal interviews, and internal hospital documents. Both quantitative and qualitative data were analyzed. The surveys were administered on three different occasions to patients and staff. Other sources of data included informal interviews with patients and staff who responded to the surveys, and chart audits.The study findings revealed that the majority of respondents had increased levels of satisfaction and perceptions of increased quality of care following implementation of combined care. These findings, related to combined care and the role of change in its implementation and evaluation, indicate that there are no right or easy answers about how to make new ideas become reality in a smooth, pleasant way.

Some ecological factors affecting the input and population level of total and faecal coliforms and salmonella in Twelve Mile Creek, Lake Ontario and sewage waters near St. Catharines, Ontario

Some Ecological Factors Affecting the Input and Population Levels of Total and Faecal Coliforms and Salmonella in Twelve Mile Creek, Lake Ontario and Sewage Waters Near St. Catharines, Ontario. Supervisor: Dr. M. Helder. The present study was undertaken to investigate the role of some ecological factors on sewage-Dorne bacteria in waters near St. Catharines, Ontario. Total and faecal coliform levels and the presence of Salmonella were monitored for a period of a year along with determination of temperature, pH, dissolved oxygen, total dissolved solids, nitrate N, total phosphate P and ammonium N. Bacteriological tests for coliform analysis were done according to APHA Standard Methods by the membrane filtration technique. The grab sampling technique was employed for all sampling. Four sample sites were chosen in the Port Dalhousie beach area to determine what bacteriological or physical relationship the sites had to each other. The sample sites chosen were the sewage inflow to and the effluent from the St. Catharines (Port Dalhousie) Pollution Control Plant, Twelve Mile Creek below the sewage outfall and Lake Ontario at the Lakeside Park beach. The sewage outfall was located in Twelve Mile Creek, approximately 80 meters from the creek junction with the beach and piers on Lake Ontario. Twelve Mile Creek normally carried a large volume of water from the WeIland Canal which was diverted through the DeCew Generating Station located on the Niagara Escarpment. An additional sample site, which was thought to be free of industrial wastes, was chosen at Twenty Mile Creek, also in the Niagara Region of Ontarioo 3 There were marked variations in bacterial numbers at each site and between each site, but trends to lower_numbers were noted from the sewage inflow to Lake Ontario. Better correlations were noted between total and faecal coliform population levels and total phosphate P and ammonium N in Twenty Mile Creek. Other correlations were observed for other sample stations, however, these results also appeared to be random in nature. Salmonella isolations occurred more frequently during the winter and spring months when water temperatures were minimal at all sample stations except the sewage inflow. The frequency of Salmonella isolations appeared to be related to increased levels of total and faecal coli forms in the sewage effluent. However, no clear relationships were established in the other sample stations. Due to the presence of Salmonella and high levels of total and faecal coliform indicator organisms, the sanitary quality of Lake Ontario and Twelve Mile Creek at the sample sites seemed to be impaired over the major portion of the study period.

A randomized follow-up study of the general health and quality of life of an elderly edentulous population wearing either mandibular two-implant overdentures or conventional dentures

L’augmentation de la population âgée dans la société indique que les systèmes de soins de la santé font face à de nouveaux défis. Les hauts niveaux d’incapacité qui en résultent peuvent être réduits par les nouvelles technologies, la promotion de la santé ainsi que des stratégies de prévention. Les écrits scientifiques récents soulignent la supériorité des prothèses dentaires implanto-portées par rapport aux prothèses conventionnelles en termes de satisfaction et de qualité de la vie des patients. Cependant, il n'est toujours pas clair si ces avantages ont des effets positifs à long terme sur la santé orale et générale ainsi que sur la qualité de vie des populations âgées. Objectifs, Hypothèses : Notre but était de mesurer l’impact des prothèses mandibulaires retenues par 2 implants sur la qualité de vie associée à la santé bucco-dentaire et générale ainsi que sur la santé orale et la qualité du sommeil des aînés édentés. Nous avons évalué les hypothèses nulles suivantes : il n'y a aucune différence entre les individus portants des prothèses mandibulaires retenues par 2 implants (IODs) et ceux qui portent des prothèses conventionnelles (CDs), par rapport à la qualité de vie reliée à la santé bucco-dentaire et générale, la santé orale et la qualité du sommeil, un an après avoir reçu leurs nouvelles prothèses. Méthodes : Dans cette étude randomisée contrôlée, 255 aînés ont reçu au hasard IODs ou les CDs, les deux types de prothèses étant opposés à des prothèses maxillaires conventionnelles. La qualité de la vie reliée à la santé bucco-dentaire (OHRQoL) et la santé générale subjective ont été mesurées avec les questionnaires Oral Health Impact Profile (OHIP-20) et Short Form-36 (SF-36) en condition pré-traitement et après un an. La qualité du sommeil et la somnolence diurne ont été mesurées à l’aide du questionnaire Qualité de Sommeil de Pittsburg et de l'Échelle de Somnolence Epworth. La santé orale a été évaluée par un examen clinique. Les variables indépendantes étaient le sens de cohérence et le type de prosthèse, ainsi que des variables socio-démographiques. En utilisant des analyses statistiques bi et multi-factorielles, des comparaisons à l’intérieur d’un même groupe et entre deux groupes ont été effectuées. Résultats : Les différences pré et post traitement pour les cotes OHIP étaient significativement plus grandes pour le groupe IOD que le groupe CD (p<0.05). Le type de traitement et la cote pré-traitement étaient des facteurs significatifs à OHRQoL (p < 0.0001). Dans le groupe CD, il y avait une diminution significative par rapport aux cotes de «Physical Component Scores (PCS)», le fonctionnement physique, le rôle physique et la douleur physique entre les données pré-traitement et un an après le traitement, ce qui indique une diminution au niveau de la santé générale subjective. Dans le groupe IOD, une diminution statistiquement non significative a été remarquée par rapport à toutes les cotes des sous-échelles de SF-36, sauf pour la douleur physique. Le modèle final de régression a démontré qu’après ajustement pour les variables âge, sexe, statut marital et type de traitement, la cote totale finale d’OHIP et les données de bases de PCS prédisaient la cote finale de PCS (p < 0.0001). Aucune corrélation significative entre sens de cohérence et OHRQoL n'a été détectée (r =-0.1; p > 0.05). Les aînés porteurs des prothèses conventionnelles avaient presque 5 fois plus de chance d’avoir une stomatite prothétique que ceux portant des prothèses mandibulaires hybrides retenues par 2 implants (p < 0.0001). Les aînés ayant subjectivement une mauvaise santé générale avaient une qualité de sommeil moins bonne que ceux avec une meilleure santé générale subjective (p < 0.05). Les personnes qui avaient une OHRQoL moins bonne étaient presque 4 fois plus somnolentes pendant le jour que celles avec une meilleure OHRQoL (p=0.003, χ2; OR =3.8 CI 1.5 to 9.8). L'analyse de régression a montré que la santé générale subjective et OHRQoL prévoient la qualité du sommeil (p=0.022 et p=0.001, respectivement) et la somnolence diurne (p=0.017 et p=0.005, respectivement). Conclusions: Les résultats de cette étude suggèrent que, chez les aînés édentés, des prothèses mandibulaires hybrides retenues par deux implants amènent une amélioration significative de la qualité de vie reliée à la santé bucco-dentaire et maintiennent la sensation d’une meilleure santé physique. Des prothèses hybrides implanto-portées peuvent contribuer à la santé orale en réduisant les traumatismes infligés à la muqueuse orale et en contrôlant la stomatite prothétique. Les aînés édentés dont le niveau de qualité de vie reliée à la santé bucco-dentaire est bas, peuvent aussi avoir des troubles de qualité du sommeil.

Patterns and quality of object-oriented software systems

Lors de ces dix dernières années, le coût de la maintenance des systèmes orientés objets s'est accru jusqu' à compter pour plus de 70% du coût total des systèmes. Cette situation est due à plusieurs facteurs, parmi lesquels les plus importants sont: l'imprécision des spécifications des utilisateurs, l'environnement d'exécution changeant rapidement et la mauvaise qualité interne des systèmes. Parmi tous ces facteurs, le seul sur lequel nous ayons un réel contrôle est la qualité interne des systèmes. De nombreux modèles de qualité ont été proposés dans la littérature pour contribuer à contrôler la qualité. Cependant, la plupart de ces modèles utilisent des métriques de classes (nombre de méthodes d'une classe par exemple) ou des métriques de relations entre classes (couplage entre deux classes par exemple) pour mesurer les attributs internes des systèmes. Pourtant, la qualité des systèmes par objets ne dépend pas uniquement de la structure de leurs classes et que mesurent les métriques, mais aussi de la façon dont celles-ci sont organisées, c'est-à-dire de leur conception, qui se manifeste généralement à travers les patrons de conception et les anti-patrons. Dans cette thèse nous proposons la méthode DEQUALITE, qui permet de construire systématiquement des modèles de qualité prenant en compte non seulement les attributs internes des systèmes (grâce aux métriques), mais aussi leur conception (grâce aux patrons de conception et anti-patrons). Cette méthode utilise une approche par apprentissage basée sur les réseaux bayésiens et s'appuie sur les résultats d'une série d'expériences portant sur l'évaluation de l'impact des patrons de conception et des anti-patrons sur la qualité des systèmes. Ces expériences réalisées sur 9 grands systèmes libres orientés objet nous permettent de formuler les conclusions suivantes: • Contre l'intuition, les patrons de conception n'améliorent pas toujours la qualité des systèmes; les implantations très couplées de patrons de conception par exemple affectent la structure des classes et ont un impact négatif sur leur propension aux changements et aux fautes. • Les classes participantes dans des anti-atrons sont beaucoup plus susceptibles de changer et d'être impliquées dans des corrections de fautes que les autres classes d'un système. • Un pourcentage non négligeable de classes sont impliquées simultanément dans des patrons de conception et dans des anti-patrons. Les patrons de conception ont un effet positif en ce sens qu'ils atténuent les anti-patrons. Nous appliquons et validons notre méthode sur trois systèmes libres orientés objet afin de démontrer l'apport de la conception des systèmes dans l'évaluation de la qualité.

Influence of Frequent Flyer Programme and Airline Service Quality on Re-buy Intentions of Airline Frequent Passengers

The growth potential of service sector, especially the aviation sector in the Indian economy is splendid. Therefore, it is crucial for the airline service providers to realize their customers, design offers and deliver the desired value to their customers. This study reveals the effect of airline passenger satisfactions particularly on re-buy intentions derived from the attributes-level performance dimensions of both service aspects and loyalty programme of an airline. The mediation effect of satisfaction and other selected antecedents on the re-buy intention of a passenger is hypothesized in this study. Critical areas affecting buying intentions such as core service quality and loyalty attribute-level performances, effect of frequent flyer programme and service quality satisfaction, passenger trust on airline, brand image and moderating effects of perceived value, frequent programme status and travel frequency of airline passengers are linked in a structural model to assess the strength of each facet in affecting re-buy intentions. Implications to the airlines were made based on the finding that re-buy intentions cannot be attributed solely to the impacts of frequent flyer programme, rather affected through the mediation effect of airline service quality satisfaction, which is very much valid for the higher FFP status category of frequent travelers. The effects of moderation caused by perceived value, FFP status and flying experience were also found to be significant in making re-buy intentions.

Effects of manure quality and application forms on soil C and N turnover of a subtropical oasis soil under laboratory conditions

Our knowledge of the agricultural sustainability of the millennia-old mountain oases in northern Oman is restricted in particular with respect to C and N turnover. A laboratory study was conducted (1) to analyse the effects of rewetting and drying on soil microorganisms after adding different manures, (2) to investigate the effects of mulching or incorporating of these manures, and (3) to evaluate the relationships between C and N mineralisation rates and manure quality indices. During the first 9-day rewetting and drying cycle, i.e. the “mulch” period, the content of extractable organic C decreased by approximately 40% in all four treatments. During the second 9-day rewetting and drying cycle, i.e. the “incorporation” period, this fraction decreased insignificantly in almost all treatments. The control and mature manure treatments form the first pair with a low percentage of total organic C evolved as CO2 (0.3% in 18 days) and a considerable percentage of total N mineralised as NH4 and NO3 (1% in 18 days), the fresh and immature manure treatments form the second pair with a higher amount of total organic C evolved as CO2 (0.5% in 18 days) and no net N mineralisation. During the first 9-day rewetting and drying cycle, the contents of microbial biomass C and biomass N increased by approximately 150% in all four treatments. During the second 9-day rewetting and drying cycle, no further increase was observed in the control and immature manure treatments and a roughly 30% increase in the other two treatments.

Relationship between physical capacity and quality of life in workers university

Aim: Examine the relationship between the functional capacity and the quality of life related to health in university workers. Methodology: Cross-sectional study in 146 subjects, divided in two groups: Low functional Capacity (< 9 METs) and High functional Capacity (> 9.1 METs). We evaluated quality of life related to health (HRQOL-Health Questionnaire SF-12) and functional capacity (Questionnaire PAR/PAF) as indicators of health status. Results: 47.3% (69 men) and 52.7% (78 women). The average age of the groups was 35.0 ± 9.7 years (range 19,0-60,0 years). For HRQOL, the average found in the population assessed was 45.2 ± 4.42 (range 33,0-58,1) and 43.8 ± 6.87 (range 19,8-43,8) in components Physical Component Summary (PCS-12) and Mental Component Summary (MCS-12), respectively p = NS. Significant differences were found when comparing functional ability and sex, p<0,001 in both groups. Similarly, sex and mental component MCS-12 (group of Lower Functional) p = 0,049 as well as women and the physical component PCS-12, p = 0,05 between groups. Finally, a better score in HRQL observed in the group of High Capacity and functional components in both sex OR 0.59 (0.25-1.38). Conclusions: The results of this study demonstrate the relationship between High functional Capacity and a better HRQOL in this population.

Caracterització i revaloració de la fracció plasmàtica de la sang de porc procedent d'escorxadors industrials

La tesi s'ha estructurat en tres apartats que, en conjunt, han de permetre determinar les possibilitats d'aprofitament dins la mateixa indústria alimentària de la fracció plasmàtica de la sang de porc generada per escorxadors que utilitzen sistemes oberts de recollida higiènica. 1. En la primera part s'analitza la composició de la sang higiènica que s'està recollint actualment i s'estudien les característiques tant físico-químiques com microbiològiques que determinen la seva qualitat. La caracterització s'ha realitzat amb sang recollida en diferents escorxadors industrials de les comarques de Girona i s'ha centrat principalment en l'estudi de la contaminació microbiològica i el nivell d'hemòlisi de la sang. S'ha fet un disseny experimental que ha permès alhora valorar l'efecte d'alguns factors sobre la qualitat de la sang: possibles diferències relacionades amb (1) la climatologia del període de l'any en el qual es fa la recollida, (2) particularitats dels escorxadors (grandària, sistemes de dessagnat, tipus, dosi i sistema de dosificació de l'anticoagulant, condicions de processament, maneig i emmagatzematge després de la recollida, etc.). Els resultats obtinguts ens permeten constatar que, en les condicions actuals, la sang que s'està recollint en els escorxadors estudiats no es pot considerar adequada per a una matèria primera de productes destinats a alimentació humana. La major part de la microbiota contaminant s'adquireix en el propi sagnador. S'ha constatat que el sistema de dessagnat en posició horitzontal podria ser una mesura útil per minimitzar la contaminació d'origen fecal o provinent de la pell de l'animal sacrificat i que la separació immediata de les fraccions en el propi escorxador també pot contribuir a reduir la contaminació. Així doncs, en el benentès que l'efectivitat pot obtenir-se del conjunt de mesures preses, més que de l'aplicació d'una sola d'elles, es suggereix la introducció d'una sèrie d'actuacions que potser permetrien reduir els nivells de contaminació que s'obtenen actualment. El tractament mecànic de la sang, el sistema d'addició d'anticoagulant, el volum i concentració de la solució anticoagulant afegida i el període d'emmagatzematge són els factors responsables de l'hemòlisi; mentre que nivells elevats de contaminació microbiològica i el tipus d'anticoagulant utilitzat deterrminen la velocitat d'increment de l'hemòlisi de sang refrigerada. S'ha constatat que quan la sang no pot ser processada immediatament i s'ha d'emmagatzemar en refrigeració és millor utilitzar citrat sòdic enlloc de polifosfat com a anticoagulant ja que l'increment d'hemòlisi es dóna més lentament. 2. El segon apartat s'ha centrat en la fracció plasmàtica de la sang. S'ha utilitzat la deshidratació per atomització com a tecnologia de conservació del plasma i s'ha fet una caracterització del producte en pols resultant des del punt de vista de composició i qualitat. A més de la contaminació microbiològica, que determina la qualitat higiènico-sanitària del producte, s'ha realitzat un estudi de les propietats funcionals que podrien fer del plasma un producte útil en la formulació d'aliments (capacitat escumant, emulsionant, gelificant). S'ha fet especial incidència en (1) determinar l'efecte del procés tecnològic de deshidratació sobre la funcionalitat del producte i (2) estudiar l'estabilitat del plasma deshidratat durant el període d'emmagatzematge. En les condicions de deshidratació per atomització aplicades no es provoca desnaturalització de la fracció proteica i s'obté un producte suficientment deshidratat, amb una aw<0,4 per permetre suposar una bona estabilitat. Algunes mostres de plasma deshidratat analitzades presenten nivells detectables de determinats residus (sulfonamides i corticosteroides). La qualitat microbiològica del producte en pols reflecteix l'elevada contaminació que contenia la matèria primera utilitzada, tot i que la deshidratació per atomització ha comportat la reducció en una unitat logarítmica de la càrrega contaminant. Els recomptes generals de microorganismes són encara preocupants i més tenint en compte que s'ha evidenciat la presència de toxines estafilocòciques en algunes mostres. L'avaluació de les propietats funcionals del producte deshidratat en relació a les que presentava el plasma líquid ens ha permès comprovar que: (1) El procés de deshidratació no ha afectat la solubilitat de les proteïnes. Això, junt amb el fet que no s'obtinguin diferències significatives en l'anàlisi calorimètrica de mostres líquides o deshidratades, permet concloure que el procés no provoca desnaturalització proteica. (2) No s'observen efectes negatius del procés tecnològic sobre la capacitat escumant ni en l'activitat emulsionant de les proteïnes plasmàtiques, dues propietats funcionals que possibiliten l'aplicació del plasma amb aquestes finalitats en l'elaboració d'alguns aliments. (3) La deshidratació tampoc perjudica de manera important les característiques dels gels que s'obtenen per escalfament, ja que els gels obtinguts a partir del plasma líquid i del plasma deshidratat presenten la mateixa capacitat de retenció d'aigua i no s'observen diferències en la microestructura de la xarxa proteica d'ambdós tipus de gel. Tanmateix, els que s'obtenen a partir del producte en pols mostren una menor resistència a la penetració. L'estudi d'estabilitat ens ha permès comprovar que la mostra de plasma deshidratat per atomització perd algunes de les seves propietats funcionals (facilitat de rehidratació, capacitat de retenció d'aigua i fermesa dels gels) si s'emmagatzema a temperatura ambient, mentre que aquestes característiques es mantenen un mínim de sis mesos quan el producte en pols es conserva a temperatura de refrigeració. 3. En l'última part, tenint en compte les conclusions derivades dels resultats dels apartats anteriors, s'han assajat tres possibles sistemes de reducció de la contaminació aplicables a la fracció plasmàtica com a pas previ a la deshidratació, per tal de millorar les característiques de qualitat microbiològica i les perspectives d'estabilitat del producte durant l'emmagatzematge. S'ha determinat l'eficàcia, i l'efecte sobre les propietats del plasma deshidratat, que poden tenir tractaments d'higienització basats en la centrifugació, la microfiltració tangencial i l'aplicació d'altes pressions. Els tractaments de bactofugació aplicats permeten reduir entre el 96 i el 98% la contaminació microbiana del plasma. Aquesta reducció s'aconsegueix tant amb un sistema discontinu com amb un sistema continu treballant a una velocitat de 12 L/h, fet que permetria adaptar el tractament de bactofugació a un procés de producció industrial. Un sistema combinat de bactofugació en continu i microfiltració tangencial permet incrementar l'eficàcia fins a un 99,9 % de reducció. Cal tenir present, però, que aquest tractament provoca també una disminució de l'extracte sec que afecta negativament les propietats funcionals del plasma líquid. Malgrat suposar una pèrdua pel que fa al rendiment, aquest efecte negatiu sobre la funcionalitat no suposaria cap inconvenient si s'utilitzés la deshidratació com a tecnologia de conservació del plasma, ja que es podria corregir l'extracte sec durant la reconstitució del producte. Caldria avaluar si la millora en la qualitat higiènico-sanitària del producte compensa o no les pèrdues que suposa aquest sistema d'higienització combinat. Amb relació als tractaments d'alta pressió, de totes les condicions de tractament assajades, les pressions de fins 450 MPa permeten obtenir plasma sense modificacions importants que impedeixin la seva deshidratació per atomització. Així doncs, les condicions de procés que s'han aplicat són pressuritzacions a 450 MPa de 15 minuts de durada. La temperatura de tractament que s'ha mostrat més eficaç en la reducció dels recomptes de microorganismes ha estat de 40ºC. Els tractaments a aquesta temperatura permeten assolir reduccions del 99,97% i disminuir en un 80% la capacitat de creixement dels microorganismes supervivents a la pressurització en relació a la que presentava la població contaminant del plasma abans del tractament. L'estudi de l'efecte d'aquest tractament (450 MPa, 15 min i 40ºC) sobre les propietats funcionals del plasma ha permès observar que la pressurització comporta una disminució en la solubilitat del producte però una millora en les propietats de superfície -estabilitat de l'escuma i activitat emulsionant- i un increment de la capacitat de retenció d'aigua i de la duresa dels gels obtinguts per escalfament. Calen més estudis per confirmar i caracteritzar aquesta millora en la funcionalitat, així com per establir si el tractament de pressurització afecta també l'estabilitat del producte durant l'emmagatzematge. De totes les tecnologies d'higienització assajades, l'alta pressió és la que permet obtenir millors resultats en el sentit de poder garantir un producte de bona qualitat microbiològica i segur, des del punt de vista sanitari i tecnològic, per a la seva utilització com a ingredient alimentari.