Length-weight relationship and relative condition factor in Macrobrachium (Hellex)

The length-weight relationship was calculated for the freshwater prawn Macrobrachium idae. About 150 specimens of M. idae (males 50, females 50 and 50 juveniles) were utilised for this study. The length-weight relationship was assessed separately for males, females and indeterminants. The regression equation for males, females and indeterminants showed significant differences whereas it was insignificant for males and females. The variations in length-weight relation between sexes and indeterminants were compared and discussed. The relationship between total length with carapace length and total length with rostral length were also determined.

Length-weight relationships and relative conditions of two sciaenids Otolithes cuvieri Trewavas and Johnius elongatus Mohan from the Karachi coast

Estimates of length-weight relationship in Otolithes cuvieri justify separate equations for males (log W =-5.0100+3.1365 log L) and females (log W =-5.2000+3.1006 log L). Relative condition factor "Kn" was found to be 0.877-1.946 in males and 0.879-1.328 in females. High "Kn" values during March to September at 180-220 mm TL in either sexes are indicative of the maturation of gonads. Separate equations for length-weight relationship are also justified for males (log W = -5.1126 + 3.0690 log L) and females (log W = -5.6400 + 3.3070 log L) of Johnius elongatus . "Kn" values were found to be 0.924-1.894 for males and 0.894-1.087 for females. High "Kn" values during January-May and August-September at 130 mm TL onward are indicative of gonadal maturation.

Preliminary experiments to evaluate the relative efficiency of different natural baits in line fishing

A series of experimental hand-line fishing operations were conducted off the Madras coast employing five different types of natural fish baits. Based on the total catch of fish per day of fishing under each type of bait used, a comparative study on the catching efficiency of the different natural fish-baits was made. The reaction of the fish to particular bait appears to be the result of a complex process. Live baits have the maximum catching efficiency as seen from the fish landings when live prawns were employed as the bait. The procurement of live baits is a serious problem to the fishermen and as such suitable artificial fish lures can be profitably employed.

Dehydration of prawns in tunnel dryers

This paper deals with the dehydration of prawns in a tunnel dryer. Conditions required to produce an end-product of desired colour, shape and texture as well as good reconstitution and organoleptic properties which are not obtained in the normal hot air drying, have been worked out. An initial temperature and relative humidity of 90°C. and 85%-90% respectively and an air velocity not more than 1 metre/second are the essential conditions required. Both temperature and relative humidity are to be reduced to 70°C and 40% respectively after about an hour's operation, till the drying is complete. Flavour of the reconstituted product is close to that of the fresh cooked prawns and the texture is judged to be soft. Drying time required to reduce the moisture content of fresh prawns to 15% level is about 7 hours compared to 6-7 hours in normal hot air drying and more than 36 hours in sun-drying.

On the relative efficiency of different shaped otter boards

Rectangular, horizontal curved and oval otter boards were tested under identical fishing conditions and their relative efficiency ascertained on the basis of towing tension and the horizontal opening of the boards. While the tension in the warps with the different otter boards was not significant, the horizontal curved board gave increased lateral spread to the net.

On the relative catch efficiency of different shaped otter boards in bottom trawling

Three different types of otter boards varying in shape were tried to find out their relative catch efficiency. They were operated with two types of nets. The results indicated that the curved otter boards gave more catch per unit effort with all the combinations of nets and riggings tried.

An accelerated method of hot air drying of fish

The effects of temperature and relative humidity on the rate of drying of split open fish and salted fish in a tunnel dryer have been studied at a constant air velocity. By a judicious combination of these two, the rate of drying could be considerably accelerated, 10 to 12 hours only being required for drying to moisture levels below 30% in the case of mackerel, lactarius, otolithes and kilimeen (Nemipterus japonicus)

Relative abundance and diel variation of zooplankton from south west coast of India

Relative abundance and diurnal variations of zooplankton from six anchor stations along Kerala coast were investigated. Samples were collected during April-May 1988 at three hour intervals from depths varying between 15 and 40 m from the traditional fishing grounds of Kerala coast. Average biomass values ranged from 45-95 ml 100/mˉ³. Increase in zooplankton at night was discernible at most of the stations and the highest biomass noticed was 131 ml 100/mˉ³. Copepods formed the most abundant group, of which calanoids predominated. A swarm of the hydromedusan species, Aequorea conica, (181/mˉ³) was seen at night. Quantitative and qualitative variations of various zooplankton groups from six stations in relation to selected physicochemical factors are discussed. Maximum fish larvae were observed in the night samples. Relatively high abundance of sardines, carangids and flat fish larvae in the collections is in agreement with the predominance of fish catch from the area of study.

On the relative utility of different methods to increase the vertical height in an otter trawl

Comparative fishing experiments to study the relative utility of different methods for increased vertical spread of bottom trawl and the availability of off bottom fishes in the region were made using gussets, kite, separate float line and side panels on a two seam net. The catch rates as well as composition of fish were studied. The opening of the trawl mouth, both horizontally and vertically, under different operating gears and towing tension on warps were measured and estimated for comparison purposes. Better catch rate with good quality fishes was obtained with the gear operated with separate float line. With kite, the vertical spread was increased with less catch indicating poor concentration of off bottom fishes.

Influence of particle properties on the erosive wear of sintered boron carbide

Sintered boron carbide is very hard, and can be an attractive material for wear-resistant components in critical applications. Previous studies of the erosion of less hard ceramics have shown that their wear resistance depends on the nature of the abrasive particles. Erosion tests were performed on a sintered boron carbide ceramic with silica, alumina and silicon carbide erodents. The different erodents caused different mechanisms of erosion, either by lateral cracking or small-scale chipping; the relative values of the hardness of the erodent and the target governed the operative mechanism. The small-scale chipping mechanism led to erosion rates typically an order of magnitude lower than the lateral fracture mechanism. The velocity exponents for erosion in the systems tested were similar to those seen in other work, except that measured with the 125 to 150 μm silica erodent. With this erodent the exponent was initially high, then decreased sharply with increasing velocity and became negative. It was proposed that this was due to deformation and fragmentation of the erodent particles. In the erosion testing of ceramics, the operative erosion mechanism is important. Care must be taken to ensure that the same mechanism is observed in laboratory testing as that which would be seen under service conditions, where the most common erodent is silica.

Experimental study of tip clearance flow in a radial inflow turbine

This paper describes an experimental investigation of tip clearance flow in a radial inflow turbine. Flow visualization and static pressure measurements were performed. These were combined with hot-wire traverses into the tip gap. The experimental data indicates that the tip clearance flow in a radial turbine can be divided into three regions. The first region is located at the rotor inlet, where the influence of relative casing motion dominates the flow over the tip. The second region is located towards midchord, where the effect of relative casing motion is weakened. Finally a third region exists in the exducer, where the effect of relative casing motion becomes small and the leakage flow resembles the tip flow behaviour in an axial turbine. Integration of the velocity profiles showed that there is little tip leakage in the first part of the rotor because of the effect of scraping. It was found that the bulk of tip leakage flow in a radial turbine passes through the exducer. The mass flow rate, measured at four chordwise positions, was compared with a standard axial turbine tip leakage model. The result revealed the need for a model suited to radial turbines. The hot-wire measurements also indicated a higher tip gap loss in the exducer of the radial turbine. This explains why the stage efficiency of a radial inflow turbine is more affected by increasing the radial clearance than by increasing the axial clearance.