Sex, drugs, and STIs: Syphilis infection and hepatitis B vaccine compliance among illicit drug users in Houston

Although the association between syphilis infection status and compliance with the hepatitis B virus vaccine has been the focus of investigation, there is a lack of data regarding the association between syphilis infection and HBV vaccine compliance. The author investigated the association between the exposure of syphilis infection and the outcome of HBV vaccine completion, defined as degree of constancy and accuracy with which a patient follows a prescribed regimen. A cohort design was employed using interview and serological data from the Drugs, AIDS, STDs, Hepatitis (DASH) Research Project; analysis was restricted to HIV and HBV seronegative (at baseline), illicit drug users residing in Harris County. Syphilis negative and syphilis positive infection status was determined from the serological data while covariates and outcome information were determined from the DASH Project Questionnaire; enrolled subjects (n=1160) were selected from the data. Association between exposure and outcome was assessed with logistic regression adjusted for data-based confounders. ^ A prevalence of 7% and 71% was found for syphilis and HBV vaccine compliance, respectively. When measuring the actual association between syphilis infection status and HBV vaccine compliance, an odds ratio of 1.49 (95% CI: 0.86, 2.72) was obtained. There was a non-significant association between these two variables. 78% of the study population was syphilis positive and completed the vaccine series compared to 70% of the population that was syphilis negative and received all three doses. This finding confirms that there is a difference between syphilis positive and negative drug users with respect to HBV vaccine compliance. The fact that differences were found in these drug users with respect to vaccine schedule supports the idea that sub-group differences may exist and thus merits further investigation. If these differences are confirmed, it is recommended that STI interventions identify community characteristics of their samples and target populations based on practices specific to that community. ^

Aeronautical Metadata Profile based on Geographic International Standards

The aeronautical information plays an essential rolein air safety, chief objective of the aeronautical industry. Community policies and projects are being currently developed for the adequate management of a single European air space. To make this possible, an appropriate information management and a set of tools that allow sharing and exchanging this information, ensuring its interoperability and integrity, are necessary. This paper presents the development and implementation of a metadata profile for description of the aeronautical information based on international regulations and recommendations applied within the geographic scope. The elements taken into account for its development are described, as well as the implementation process and the results obtained.

An example of Learning based on competences: Use of Maxima in Linear Algebra for Engineers

This paper analyzes the role of Computer Algebra Systems (CAS) in a model of learning based on competences. The proposal is an e-learning model Linear Algebra course for Engineering, which includes the use of a CAS (Maxima) and focuses on problem solving. A reference model has been taken from the Spanish Open University. The proper use of CAS is defined as an indicator of the generic ompetence: Use of Technology. Additionally, we show that using CAS could help to enhance the following generic competences: Self Learning, Planning and Organization, Communication and Writing, Mathematical and Technical Writing, Information Management and Critical Thinking.

On a meaningful integration of web services in data-intensive biomedical environments: The DICODE approach

This paper reports on an innovative approach that aims to reduce information management costs in data-intensive and cognitively-complex biomedical environments. Recognizing the importance of prominent high-performance computing paradigms and large data processing technologies as well as collaboration support systems to remedy data-intensive issues, it adopts a hybrid approach by building on the synergy of these technologies. The proposed approach provides innovative Web-based workbenches that integrate and orchestrate a set of interoperable services that reduce the data-intensiveness and complexity overload at critical decision points to a manageable level, thus permitting stakeholders to be more productive and concentrate on creative activities.

Efficiency analysis of information technology and online social networks management : an integrated DEA-Model assessment

This paper analyses the relationship between productive efficiency and online-social-networks (OSN) in Spanish telecommunications firms. A data-envelopment-analysis (DEA) is used and several indicators of business ?social Media? activities are incorporated. A super-efficiency analysis and bootstrapping techniques are performed to increase the model?s robustness and accuracy. Then, a logistic regression model is applied to characterise factors and drivers of good performance in OSN. Results reveal the company?s ability to absorb and utilise OSNs as a key factor in improving the productive efficiency. This paper presents a model for assessing the strategic performance of the presence and activity in OSN.

Modelo explicativo de la relación entre productividad y valores organizacionales, en la PYME del sector metalúrgico y minero de Venezuela

Como consecuencia de los procesos de globalización el mundo empresarial está sometido a constantes cambios que han originado la necesidad en las empresas de evaluar su funcionamiento, con el objeto de adecuar su gestión a las mejores prácticas gerenciales y operativas, en función de adaptarse a las exigencias presentes en los escenarios en que están inmersas. La presente investigación tiene como propósito desarrollar un modelo explicativo de la relación entre la productividad y los valores organizacionales, teniendo como premisa los distintos planteamientos o teorías que destacan la importancia que tienen los valores organizacionales para que las empresas logren sus metas. Específicamente se tomó como referencia la clasificación de los valores organizacionales, que contempla el modelo de gestión de Dirección por Valores (DPV), de García y Dolan (2001). Las PYMES, al considerar el efecto que tienen los valores organizacionales en la productividad, pueden apoyar su gestión a través del compromiso de las personas para lograr los resultados de productividad que quieren o necesitan alcanzar. El abordaje del estudio se ha basado en la investigación explicativa, a través de la cual se exponen las razones de ocurrencia de un fenómeno o se muestran los mecanismos por los que se relacionan dos o más variables, lo que permitió conjugar definiciones y supuestos de las relaciones encontradas entre los valores organizacionales identificados de acuerdo a la opinión de los entrevistados y que resultaron ser significativos con los resultados de productividad que presentan las empresas que fueron objeto de esta investigación La población estuvo conformada por 40 empresas activas del sector metalúrgico y minero de Ciudad Guayana, Estado Bolívar, Venezuela, pertenecientes a la Asociación de Industriales Metalúrgicos y de Minería de la región Guayana (AIMM) y al directorio de la Cámara de Industriales y Mineros de Guayana. La muestra estudiada corresponde a 25 empresas que representan el 62% de la población. El proceso que se siguió para generar el modelo explicativo contempla tres etapas. La primera consiste en la fase descriptiva donde se recogió la información referente a la productividad de las empresas y a la determinación de los valores organizacionales identificados a través del análisis cualitativo de las entrevistas que se realizaron a los informantes de las empresas de la muestra. Para ello se utilizó el software Atlas ti 6.0. La segunda etapa, denominada comparativa, consistió en determinar la relación entre la productividad y los valores organizacionales, a través de las tablas de contingencias, de acuerdo con el grado de significancia que mostró el estadístico Chi- cuadrado. La tercera y última etapa del proceso es la fase explicativa que consistió en estimar la magnitud de la relación entre las variables productividad y valores organizacionales utilizando el coeficiente de contingencia de Pearson, y en establecer las asociaciones de acuerdo a las proximidades observadas que resultaron del análisis de correspondencias múltiples. Entre los hallazgos del estudio desarrollado se encontró que la productividad de las empresas puede fijarse en tres categorías: alta, media y baja y entre los factores que afectan a la productividad destacan, en el contexto externo: el gobierno, los clientes y los proveedores y en el contexto interno: la mano de obra, los materiales y los suministros. Según la opinión de los gerentes entrevistados, los valores organizacionales que caracterizan a las empresas del sector estudiado se agrupan en veintisiete categorías, que se clasifican en los siguientes componentes: entorno mercado, clientes, proveedores y otras empresas aliadas, medio ambiente, forma de tratar la Dirección al resto de empleados, forma de trabajar cotidiana y gestión de los recursos económicos. Los valores organizacionales que resultaron ser significativos fueron la innovación, la honestidad y el orden y limpieza. La magnitud de la relación encontrada del valor innovación fue moderadamente fuerte. Se infiere que las empresas, al tener una Productividad baja, deciden innovar en el desarrollo de nuevos productos. El valor honestidad arrojó una relación moderadamente fuerte, determinando que las empresas de Productividad alta basan sus relaciones con los proveedores en la honestidad. Finalmente, el valor orden y limpieza muestra una relación moderadamente débil, lo que hace suponer que las empresas de Productividad media tienen alguna preferencia por mantener el orden y limpieza en las áreas de trabajo. El modelo explicativo de la relación entre productividad y valores organizacionales, en las PYMES del sector metalúrgico y minero de Ciudad Guayana, quedó conformado por los siguientes componentes: mercado, clientes, proveedores y otras empresas aliadas, y medio ambiente. No se encontraron relaciones en los componentes forma de tratar la Dirección al resto de empleados, forma de trabajar cotidiana y gestión de los recursos económicos. ABSTRACT As a result of globalization processes, the business world is subject to constant change. This has resulted in the need for companies to evaluate their performance in order to adjust their processes to the best managerial and operational practices, with the goal to adapt to the demands present in the scenarios in which they are embedded. This research aimed to develop an explanatory model of the relationship between productivity and organizational values. In addition, it was based on the different approaches or theories that relate the importance for enterprises of the organizational values to achieve their goals. Specifically, reference was made to the classification of organizational values, which includes the model of Management by Values (DPV) following García and Dolan (1997). The SMEs, considering the effect of organizational values on productivity, can support their management through the commitment of their people to achieve productivity results that they want or need to accomplish. The study approach was based on explanatory research, which presents the reasons for occurrence of a phenomenon and the mechanisms through which two or more variables are related. This allowed to combine definitions and assumptions about the relationship found between organizational values and the productivity results of the companies that took part in this research. Organizational values were identified in the opinion of the managers interviewed, and were found to be significant with the productivity results. The population consisted of 40 active enterprises of the metallurgical and mining industry of Ciudad Guayana, Estado Bolivar, Venezuela. These enterprises were members of the Association of Metallurgical and Mining Industry of the Guayana Region (AIMM, by its acronym in Spanish) and the Directory of the Chamber of Industrial and Mining of Guayana. The sample of the study is comprised of 25 enterprises, which represent 62% of the total population. The process which has been followed to generate the explanatory model involves three stages. The first stage is the descriptive phase where the information about enterprises productivity and the determination of organizational values is gathered. These organizational values were identified by a qualitative analysis of the interviews conducted with managers of each enterprise. This analysis was performed using the Atlas ti 6.0 software. The second stage, denominated comparative, consisted in determining the relationship between productivity and organizational values through contingency tables, and according to the degree of significance showed by the Chi-Square, statistic. The third, and final stage of the process, is the explanatory phase. This consisted in estimating the magnitude of the relationship between productivity and organizational values variables using the Pearson's contingency coefficient. In addition, this stage comprises the establishment of the associations according to the observed proximities that resulted from the multiple correspondence analysis. Among the findings of this study, it was found that the productivity of enterprises can be set in three categories: high, medium and low. Additionally, it was found that in the external context the factors that stand out affecting productivity are: government policy, customers and suppliers, while in the domestic context they are: labor, materials and supplies. According to the opinion of the managers interviewed the organizational values that characterize the companies that were studied are grouped into twenty seven categories. These categories are classified into the following components: market environment, customers, suppliers and other allied companies, the environment, how Management deals with of the employees, way to work every day, and management of economic resources. Organizational values that were found to be significant were innovation, honesty and order and cleanliness. The magnitude of the relation of the innovation value was found to be moderately strong. It is inferred that companies that have low productivity decide to innovate in the development of new products. The honesty value showed a moderately strong relation, determining that high productivity enterprises base their relationships with suppliers on honesty. Lastly, the order and cleanliness value showed a moderately weak relation, which suggests that average productivity enterprises have a preference to maintain order and cleanliness in the work areas. The explanatory model of the relationship between productivity and organizational values, in the SMEs of the metallurgical and mining sector of Ciudad Guayana, was composed of the following components: market, customers, suppliers and other allied companies, and the environment. No relationships were found in the following components: how Management deals with employees, way to work every day, and management of economic resources.

Inter-organizational information systems adoption for service innovation in building sector

The building sector has experienced a significant decline in recent years in Spain and Europe as a result of the financial crisis that began in 2007. This drop accompanies a low penetration of information and communication technologies in inter-organizational oriented business processes. The market decrease is causing a slowdown in the building sector, where only flexible small and medium enterprises (SMEs) survive thanks to specialization and innovation in services, which allow them to face new market demands. Inter-organizational information systems (IOISs) support innovation in services, and are thus a strategic tool for SMEs to obtain competitive advantage. Because of the inherent complexity of IOIS adoption, this research extends Kurnia and Johnston's (2000) theoretical model of IOIS adoption with an empirical model of IOIS characterization. The resultant model identifies the factors influencing IOIS adoption in SMEs in the building sector, to promote further service innovation for competitive and collaborative advantages. An empirical longitudinal study over six consecutive years using data from Spanish SMEs in the building sector validates the model, using the partial least squares technique and analyzing temporal stability. The main findings of this research are the four ways an IOIS might contribute to service innovation in the building sector. Namely: a) improving client interfaces and the link between service providers and end users; b) defining a specific market where SMEs can develop new service concepts; c) enhancing the service delivery system in traditional customer?supplier relationships; and d) introducing information and communication technologies and tools to improve information management.

Modelo de taxonomia baseada nas competências profissionais de cirurgiões-dentistas que atuam na estratégia da saúde da família: uma ferramenta para planejamento instrucional

A pesquisa visa desenvolver solução para facilitar o planejamento e elaboração de ações educacionais por meio de uma taxonomia das competências profissionais em saúde que tem como base dois conceitos-chave: competências profissionais para a saúde e objetivos educacionais. Esses conceitos são explorados na perspectiva do desenvolvimento de uma taxonomia para ser utilizada como referencial de planejamento e elaboração dos cursos por professores e profissionais de educação em geral, no âmbito de Instituições de Ensino Superior (IES). Na multiplicidade de profissionais de saúde que atuam na estratégia de Saúde da Família no âmbito da Atenção Primária, foi necessário escolher uma das profissões para a construção do modelo, sendo assim, foi escolhida a Odontologia. Entretanto, o modelo poderá ser aplicado para o desenvolvimento de taxonomias que contemplem as competências de outros profissionais, entre os quais os enfermeiros e os médicos. A questão no centro da pesquisa é: será que nas práticas das equipes multiprofissionais envolvidas no desenvolvimento de ações educacionais, limitadas pelos exíguos prazos que geralmente lhes são impostos, é possível potencializar a integração entre o estado da arte dos conhecimentos desenvolvidos no mundo acadêmico com as necessidades de aprendizagem dos profissionais de saúde? O resultado que se espera da pesquisa é uma taxonomia relacionando as competências profissionais dos cirurgiões dentistas com a Taxonomia dos objetivos educacionais de Bloom, (1).

3D teaching: the ideal complement for professionals in design and construction

Today, the requirement of professional skills to university students is constantly increasing in our society. In our opinion, the content offered in official degrees need to be nourished with different variables, enriching their global professional knowledge in a parallel way; that is why, in recent years, there is a great multiplicity of complementary courses at university. One of the most socially demanded technical requirements within the architectural, design or engineering field is the management of 3D drawing software, becoming an indispensable reality in these sectors. Thus, this specific training becomes essential over two-dimension traditional design, because the inclusion of great possibilities of spatial development that go beyond conventional orthographic projections (plans, sections or elevations), allowing modelling and rotation of the selected items from multiple angles and perspectives. Therefore, this paper analyzes the teaching methodology of a complementary course for those technicians in the construction industry interested in computer-aided design, using modelling (SketchupMake) and rendering programs (Kerkythea). The course is developed from the technician point of view, by learning computer management and its application to professional development from a more general to a more specific view through practical examples. The proposed methodology is based on the development of real examples in different professional environments such as rehabilitation, new constructions, opening projects or architectural design. This multidisciplinary contribution improves criticism of students in different areas, encouraging new learning strategies and the independent development of three-dimensional solutions. Thus, the practical implementation of new situations, even suggested by the students themselves, ensures active participation, saving time during the design process and the increase of effectiveness when generating elements which may be represented, moved or virtually tested. In conclusion, this teaching-learning methodology improves the skills and competencies of students to face the growing professional demands of society. After finishing the course, technicians not only improved their expertise in the field of drawing but they also enhanced their capacity for spatial vision; both essential qualities in these sectors that can be applied to their professional development with great success.

The Influence of Space Layout, Technology and Teaching Approach on Student Learning: An Architectural Technology Perspective

Some would argue that there is a need for the traditional lecture format to be rethought in favour of a more active approach. However, this must form part of a bipartite strategy, considered in conjunction with the layout of any new space to facilitate alternative learning and teaching methods. With this in mind, this paper begins to examine the impact of the learning environment on the student learning experience, specifically focusing on students studying on the Architectural Technology and Management programme at Ulster University. The aim of this study is two-fold: to increase understanding of the impact of learning space layout, by taking a student centered approach; and to gain an appreciation of how technology can impact upon the learning space. The study forms part of a wider project being undertaken at Ulster University known as the Learning Landscape Transition Project, exploring the relationship between learning, teaching and space layout. Data collection was both qualitative and quantitative, with use of a case study supported by a questionnaire based on attitudinal scaling. A focus group was also used to further analyse the key trends resulting from the questionnaire. The initial results suggest that the learning environment, and the technology within it, can not only play an important part in the overall learning experience of the student, but also assist with preparation for the working environment to be experienced in professional life.

A formação do administrador e o papel da empresa júnior: caso FGV/EAESP

Empresas inseridas em um contexto competitivo e dinâmico buscam, por meio de diversas formas e estratégias, sobressaírem sobre as demais. Diferente de como era compreendido, o ambiente de trabalho considera que o empregado não se limita mais a receber e executar instruções. Hoje, esse profissional é valorizado pelas suas competências e, mais ainda, pela forma como ele as mobiliza. Nesse contexto, o presente estudo buscou analisar a percepção dos alunos da FGV-EAESP sobre como a formação diferenciada, por meio da atuação em empresa júnior, contribui no desenvolvimento de competências profissionais do formando em administração de empresas. Foi utilizado como aporte teórico a literatura sobre aprendizagem e competências. Metodologicamente, a pesquisa possui uma abordagem qualitativa e interpretativista. A coleta de dados foi realizada por meio de entrevistas, de forma semiestruturadas, com trinta e um respondentes, composto por alunos e egressos da Instituição de Ensino. Para a análise dos dados coletados, foi utilizado a técnica de análise de conteúdo, gerando catorze categorias intermediárias e cinco categorias finais. Como resultados, foram identificados, objetivamente, como se dá aprendizagem e desenvolvimento de competências profissionais dentro do contexto de aprendizagem proporcionado pela EJ, bem como quais delas são relevantes para atuação no mercado de trabalho.

Integrated safe driving information system development: volume IV - catalog of available materials. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Acquiring highway transportation information from abroad: final report.

Federal Highway Administration, Washington, D.C.

Acquiring highway transportation information from abroad: handbook.

Federal Highway Administration, Washington, D.C.

Survey of specialized technical information centers. Final report.

National Highway Safety Bureau, Washington, D.C.