Grid-connected roof solar plants in educational institutions for testing and electricity generation: a case in Spain.

The use of photovoltaic experimental plants in engineering educational buildings contributes to an increase in acceptance of this technology by future engineers. There are some photovoltaic (PV) systems in educational buildings in Spain, but they are usually limited to buildings in relation to electrical technologies or research areas. They are not common in other educational or official buildings. This paper presents the project of a grid-connected solar plant with two main objectives. First, different PV module technologies will be compared. Second, an emphasis on agronomical areas in educational settings will be reviewed in an attempt to facilitate student engagement in the use of the power plant. The system is grid-connected in order to pay-back the investment in the plant. In fact the electricity generated by the plant will be used by the installations of the building, as it is the closest consumer. This work intends to approximate photovoltaic technology to university degrees not directly related with it and at the same time research in comparison of systems with different technologies. This is a good example of an solar plant for both optimum production and educational purposes.

Advanced predictive quality control strategy involving different facilities

There are many industries that use highly technological solutions to improve quality in all of their products. The steel industry is one example. Several automatic surface-inspection systems are used in the steel industry to identify various types of defects and to help operators decide whether to accept, reroute, or downgrade the material, subject to the assessment process. This paper focuses on promoting a strategy that considers all defects in an integrated fashion. It does this by managing the uncertainty about the exact position of a defect due to different process conditions by means of Gaussian additive influence functions. The relevance of the approach is in making possible consistency and reliability between surface inspection systems. The results obtained are an increase in confidence in the automatic inspection system and an ability to introduce improved prediction and advanced routing models. The prediction is provided to technical operators to help them in their decision-making process. It shows the increase in improvement gained by reducing the 40 % of coils that are downgraded at the hot strip mill because of specific defects. In addition, this technology facilitates an increase of 50 % in the accuracy of the estimate of defect survival after the cleaning facility in comparison to the former approach. The proposed technology is implemented by means of software-based, multi-agent solutions. It makes possible the independent treatment of information, presentation, quality analysis, and other relevant functions.

A fitting algorithm for random modeling the PLC channel

The characteristics of the power-line communication (PLC) channel are difficult to model due to the heterogeneity of the networks and the lack of common wiring practices. To obtain the full variability of the PLC channel, random channel generators are of great importance for the design and testing of communication algorithms. In this respect, we propose a random channel generator that is based on the top-down approach. Basically, we describe the multipath propagation and the coupling effects with an analytical model. We introduce the variability into a restricted set of parameters and, finally, we fit the model to a set of measured channels. The proposed model enables a closed-form description of both the mean path-loss profile and the statistical correlation function of the channel frequency response. As an example of application, we apply the procedure to a set of in-home measured channels in the band 2-100 MHz whose statistics are available in the literature. The measured channels are divided into nine classes according to their channel capacity. We provide the parameters for the random generation of channels for all nine classes, and we show that the results are consistent with the experimental ones. Finally, we merge the classes to capture the entire heterogeneity of in-home PLC channels. In detail, we introduce the class occurrence probability, and we present a random channel generator that targets the ensemble of all nine classes. The statistics of the composite set of channels are also studied, and they are compared to the results of experimental measurement campaigns in the literature.

BatNet: a 6LoWPAN-based sensors and actuators network

Improving energy efficiency in buildings is one of the goals of the Smart City initiatives and a challenge for the European Union. This paper presents a 6LoWPAN wireless transducer network (BatNet) as part of an open energy management system. This network has been designed to operate in buildings, to collect environmental information (temperature, humidity, illumination and presence) and electrical consumption in real time (voltage, current and power factor). The system has been implemented and tested in the Energy Efficiency Research Facility at CeDInt-UPM.

Caracterización y optimización de un sistema de sonido profesional

El presente proyecto tiene como objeto caracterizar y optimizar un equipo de sonido profesional, entendiendo por “caracterizar” el determinar los atributos particulares de cada uno de los componentes integrados en el sistema, y entendiendo por “optimizar” el hallar la mejor manera de obtener una respuesta plana para todo el rango de frecuencias, libre de distorsión, y en la mayor área posible. El sistema de sonido utilizado pertenece a un grupo musical de directo, por lo que se instala y se configura en cada concierto en función de las características del recinto, sea cerrado o al aire libre. Con independencia de estas particularidades, el sistema completo se divide en dos formaciones, L y R (lado izquierdo y lado derecho del escenario), por lo que cada formación se compone de un procesador digital de la señal, cuatro etapas de amplificación, un sistema line array de ocho unidades, y un conjunto de ocho altavoces de subgraves. Para llevar a cabo el objetivo planteado, se ha dividido el proyecto en las fases que a continuación se describen. En primer lugar, se han realizado, en la cámara anecoica de la EUITT, las medidas que permiten obtener las características de cada uno de los elementos que componen el sistema. Estas medidas se han almacenado en formato ASCII. En segundo lugar, se ha diseñado una interfaz gráfica que permite, utilizando las medidas almacenadas, caracterizar tanto la respuesta individual de cada elemento de la cadena del sistema de sonido como la respuesta combinada de una unidad line array y una unidad de subgraves. La interfaz es interactiva, y tiene además la capacidad de entregar automáticamente los valores de configuración que permiten la optimización del conjunto. Esto es, obtener alineamiento en el rango de frecuencias compartido por ambas unidades. Las medidas realizadas en la cámara anecoica se han utilizado igualmente para modelar el sistema line array al completo y poder realizar simulaciones en campo libre utilizando programas de predicción acústica. Se ha experimentado con los valores de configuración que permiten el alineamiento de los elementos individuales y obtenidos a través de la interfaz desarrollada, para comprobar la validez de los mismos con la formación line array y subgraves al completo. Por otro lado, se han analizado los métodos de optimización de sistemas propuestos por profesionales reconocidos del medio con el objetivo de aplicarlos en un evento real. En la preparación y montaje del evento, se han aplicado los valores de configuración proporcionados por la interfaz, y se ha comprobado la validez de los mismos realizando medidas in situ según los criterios propuestos en los métodos de optimización estudiados. ABSTRACT. This project aims to characterize and optimize a professional sound system. Characterize must be understood as determining the particular attributes of each component integrated in the system; optimize must be understood as finding the best way to get a flat response for all the frequency range, distortion free, in the largest possible area. The sound system under test belongs to a live musical group, so it is setup and configured on each concert depending on the characteristics of the enclosure, whether it’s indoor or outdoor. Apart from these features, the whole system is divided into two clusters, L and R (left and right side of the stage), so that each one is provided with a digital signal processor, four amplification stages, an eight-units line array system, and a set of eight subwoofers . To accomplish the stated objective, the project has been divided into the steps described below. To begin with, measures have been realized in the anechoic chamber of EUITT, which make possible obtaining the characteristics of each of the elements of the system. These measures have been stored in ASCII format. Then, a graphical interface has been designed that allow, using the stored measurements and from graphics, to characterize both the individual response of each element of the string sound system and the combined response of the several elements. The interface is interactive, and also has the ability to automatically deliver the configuration settings that allow the whole optimization. That means to get alignment in the frequency range shared by a line array unit and a subwoofer unit. The measurements made in the anechoic chamber have also been used to model the complete line array system and to perform free-field simulations using acoustical prediction programs. Simulations have been done with the configuration settings that allow the individual elements alignment (provided by the graphical interface developed), in order to check their validity with the full line array and subwoofer systems. On the other hand, analysis about the optimization methods, proposed by renowned professionals of the field, has been made in order to apply them in a real concert. In the setup and assembly of the event, configuration settings provided by the interface have been applied. Their validity has been proved by making measures on-site according to the criteria set in the studied optimization methods.

Métodos no destructivos para la determinación de firmeza. Sensores de Aceleración. Impactadores.

Impact techniques can be used to evaluate firmness on fruit. Chen and Ruiz-Altisent developed and used a 50,4 g impactor with a 19 mm diameter spherical tip, dropping from different heights onto the fruit. Another impactor device is a semispherical impacting tip attached to the end of a pivoting arm. In both devices a small accelerometer is mounted behind the impacting tip. Prototype lateral impactor on-line sorting system for high-speed firmness sorting of fruits has been developed and tested. Preliminary results shows that is possible its use on-line. The last version of an impact device has new elements that improve the data resolution, the signal-noise ratio and the precision.

OMNIWORKS: Omnidirectional vision for human-UAV co-working

The OMNIWORKS project objective is to develop an autonomous and modular aerial inspection system for an off-shore meteorological mast up to 90m in length. The UAV was equipped with an omni-directional camera and vertical take-off/landing capabilities that should be simple enough to operate as to not need the interventions of a professional pilot under challenging situations. Therefore the tests included different aspects used to evaluate both the technical performance of the UAV behavior as well as the operators? point of view.

FPGA-Based Wireless Sensor Node Architecture for High Performance Applications

While for years traditional wireless sensor nodes have been based on ultra-low power microcontrollers with sufficient but limited computing power, the complexity and number of tasks of today’s applications are constantly increasing. Increasing the node duty cycle is not feasible in all cases, so in many cases more computing power is required. This extra computing power may be achieved by either more powerful microcontrollers, though more power consumption or, in general, any solution capable of accelerating task execution. At this point, the use of hardware based, and in particular FPGA solutions, might appear as a candidate technology, since though power use is higher compared with lower power devices, execution time is reduced, so energy could be reduced overall. In order to demonstrate this, an innovative WSN node architecture is proposed. This architecture is based on a high performance high capacity state-of-the-art FPGA, which combines the advantages of the intrinsic acceleration provided by the parallelism of hardware devices, the use of partial reconfiguration capabilities, as well as a careful power-aware management system, to show that energy savings for certain higher-end applications can be achieved. Finally, comprehensive tests have been done to validate the platform in terms of performance and power consumption, to proof that better energy efficiency compared to processor based solutions can be achieved, for instance, when encryption is imposed by the application requirements.

La Calidad Técnica de los Proyectos de Ejecución de Viviendas

En el proceso general de la sociedad por la mejora continua hacia la Calidad, el sector de la construcción, y más específicamente la actividad de los Arquitectos con la redacción de los proyectos, no pueden, ni deben, quedar al margen. La presente investigación apunta un procedimiento para el control técnico de los proyectos y demuestra la eficacia y rentabilidad de éste o cualquier otro método de control, avanzando una aproximación a los modelos de costes de calidad de los estudios de arquitectura. El método de trabajo que se ha previsto para el desarrollo de la tesis cuenta con una base principal consistente en definir un procedimiento general de revisión de los proyectos, tipificando los principales errores (sistema de puntos de inspección), analizando las causas que los generan, su repercusión en el plazo, durabilidad y satisfacción del cliente, así como en definir un método de cuantificación que nos aproxime a la "importancia" (económica) que tienen o inducen los errores e indefiniciones detectadas. Para demostrar la validez de la hipótesis inicial sobre la rentabilidad de aplicar un sistema de control técnico del proyecto, se ha aplicado una parte del procedimiento general particularizado para la evaluación sistemática de los problemas, indefiniciones y fallos detectados, al que llamamos de forma simplificada Método Partícula Éste se aplica sobre una muestra de proyectos que se revisan y que, para que los resultados del análisis sean representativos, se seleccionaron de forma aleatoria, respondiendo topológicamente en sus variables definitorias a la población que se pretende estudiar: la totalidad de proyectos de ejecución de viviendas producidos en el ámbito territorial de Madrid (Comunidad) en el plazo comprendido entre los años 1990 y 1995. Pero además esta representatividad está condicionada a la mayor o menor exactitud de la valoración que se haga de los sobrecostos que puedan generar los errores e indefiniciones de los proyectos. Se hace pues imprescindible el tratar de objetivar al máximo los criterios de valoración de los mismos. Con los datos generados en la revisión de cada proyecto se analizan la totalidad de resultados de la muestra objeto de estudio, sacando conclusiones sobre frecuencia e importancia de los errores, incidencia de las variables que influyen, y posibles combinaciones de variables que incrementan el riesgo. Extrapolando el análisis al método general y a la población objeto de estudio, se extraen conclusiones significativas respecto a la eficacia del control técnico de proyectos, así como de las formas de optimizar las inversiones realizadas en el mismo, depurando y optimizando selectivamente el método general definido. Con el análisis de los modelos de coste de calidad se puede constatar cómo las inversiones en desarrollar sistemas de aseguramiento de la calidad de los proyectos, o, de forma más modesta, controlando la calidad técnica de los mismos, los estudios de arquitectura, amén del mejor servicio ofrecido a los clientes, y lo que ésto supone de permanencia en el mercado, mejoran significativamente su competitividad y su margen de beneficio, demostrando que son muy rentables tanto para los propios arquitectos, como para la sociedad en general. ABSTRACT The construction sector as a whole, and especifically architects as project drafters, must fully participate in the general process of society for continuous improvement towards quality. Our research outlines a procedure for the technical control of projects and shows the efficacy and cost-effectiveness of this or any other control method, putting fonvard an approach to quality cost-models in Architecture offices. Our procedure consists mainly in defining a general method of revising projects, typifying main errors (Points of inspection system), analysing their causes, their repercussion in clients' durability and satisfaction. It wHI also define a quantitative method to assess tfie economic importance of detected errors and indefinitions. To prove our initial hypothesis on the cost-effectiveness of applying a system of tecfinical control to projects we have applied part of the general procedure, adjusting it to the systematic evaluation of problems, indefinitions and errors we have found. This will be simply called Particular Method. We will use it on a sample of projects which were randomly selected, for the sake of representativeness, and which, in their defining variables, match the population under study topologically: every housing project in Madrid (Región) between 1.990 and 1.995. Furthermore, this representativeness is related to the accuracy of the assessment of the additional costs due to errors or lack of definition in the projects. We must therefore try to be precise in the evaluation of their costs. With data obtained from the revision of each project, we analyze every result from the sample under study, drawing conclusions about the frequency and importance of each error, their causing variables, and the combination of variables which are risk-increasing. By extrapolating this analysis to the General Method and the population under study, we draw significant conclusions on the effectiveness of the technical control of projects, as well as of the ways to optimise the investment in it, improving and optimising the General Method in a selective way. Analyzing quality cost-models, we can show how the investment in developing systems that will guarantee quality projects, or, more modestly, controlling the technical quality of them, Architecture firms will not only serve their clients best, with its impact on the firm's durability, but also improve their competitivity and their profit margin proving that they are profitable both for architects themselves and for the general public.

Developing Autonomous Microgrids: A Theoretical Case Study

Microgrids are autonomously operated, geographically clustered electricity generation and distribution systems that supply power in closed system settings; they are highly compatible with renewable energy sources and distributed generation technologies. Mocrogrids are currently a serially underutilized and underappreciated commodity in the energy infrastructure portfolio worldwide. To demonstrate feasibility under poor conditions (little renewable energy potential and high demand) this capstone project develops a theoretical case study in which a renewable microgrid is employed to power rural communities of southern Montgomery County, Arkansas. Utilizing commercially manufactured 1.5-megawatt wind turbines and a 1-megawatt solar panel generation system, 4-megawatts of lithium ion battery storage, and demand response technology, a microgrid is designed that supplies 235 households with reliable electricity supply.

Simulation of optical fibre communication systems influenced by stimulated brillouin scattering

Boyd's SBS model which includes distributed thermal acoustic noise (DTAN) has been enhanced to enable the Stokes-spontaneous density depletion noise (SSDDN) component of the transmitted optical field to be simulated, probably for the first time, as well as the full transmitted field. SSDDN would not be generated from previous SBS models in which a Stokes seed replaces DTAN. SSDDN becomes the dominant form of transmitted SBS noise as model fibre length (MFL) is increased but its optical power spectrum remains independent of MFL. Simulations of the full transmitted field and SSDDN for different MFLs allow prediction of the optical power spectrum, or system performance parameters which depend on this, for typical communication link lengths which are too long for direct simulation. The SBS model has also been innovatively improved by allowing the Brillouin Shift Frequency (BS) to vary over the model fibre length, for the nonuniform fibre model (NFM) mode, or to remain constant, for the uniform fibre model (UFM) mode. The assumption of a Gaussian probability density function (pdf) for the BSF in the NFM has been confirmed by means of an analysis of reported Brillouin amplified power spectral measurements for the simple case of a nominally step-index single-mode pure silica core fibre. The BSF pdf could be modified to match the Brillouin gain spectra of other fibre types if required. For both models, simulated backscattered and output powers as functions of input power agree well with those from a reported experiment for fitting Brillouin gain coefficients close to theoretical. The NFM and UFM Brillouin gain spectra are then very similar from half to full maximum but diverge at lower values. Consequently, NFM and UFM transmitted SBS noise powers inferred for long MFLs differ by 1-2 dB over the input power range of 0.15 dBm. This difference could be significant for AM-VSB CATV links at some channel frequencies. The modelled characteristic of Carrier-to-Noise Ratio (CNR) as a function of input power for a single intensity modulated subcarrier is in good agreement with the characteristic reported for an experiment when either the UFM or NFM is used. The difference between the two modelled characteristics would have been more noticeable for a higher fibre length or a lower subcarrier frequency.

The development and applications of the combined use of NMR and ultrasound

The objective of the research carried out in this report was to observe the first ever in-situ sonochemical reaction in the NMR Spectrometer in the megahertz region of ultrasound. Several reactions were investigated as potential systems for a sonochemical reaction followed by NMR spectroscopy. The primary problem to resolve when applying ultrasound to a chemical reaction is that of heating. Ultrasound causes the liquid to move and produces 'hot spots' resulting in an increase in sample temperature. The problem was confronted by producing a device that would counteract this effect and so remove the need to account for heating. However, the design of the device limited the length of time during which it would function. Longer reaction times were required to enable observations to be carried out in the NMR spectrometer. The fIrst and most obvious reactions attempted were those of the well-known ultrasonic dosimeter. Such a reaction would, theoretically, enable the author to simultaneously observe a reaction and determine the exact power entering the system for direct comparison of results. Unfortunately, in order to monitor the reactions in the NMR spectrometer the reactant concentrations had to be signifIcantly increased, which resulted in a notable increase in reaction time, making the experiment too lengthy to follow in the time allocated. The Diels-Alder Reaction is probably one of the most highly investigated reaction systems in the field of chemistry and it was this to which the author turned her attention. Previous authors have carried out ultrasonic investigations, with considerable success, for the reaction of anthracene with maleic anhydride. It was this reaction in particular that was next attempted. The first ever sonochemically enhanced reaction using a frequency of ultrasound in the megahertz (MHz) region was successfully carried out as bench experiments. Due to the complexity of the component reactants the product would precipitate from the solution and because the reaction could only be monitored by its formation, it was not possible to observe the reaction in the NMR spectrometer. The solvolysis of 2-chloro-2-methylpropane was examined in various solvent systems; the most suitable of which was determined to be aqueous 2-methylpropan-2-ol. The experiment was successfully enhanced by the application of ultrasound and monitored in-situ in the NMR spectrometer. The increase in product formation of an ultrasonic reaction over that of a traditional thermal reaction occurred. A range of 1.4 to 2.9 fold improvement was noted, dependent upon the reaction conditions investigated. An investigation into the effect of sonication upon a large biological molecule, in this case aqueous lysozyme, was carried out. An easily observed effect upon the sample was noted but no explanation for the observed effects could be established.

Exploratory database visualisation: the application and assessment of data and dimensionality reduction

This thesis describes the development of a complete data visualisation system for large tabular databases, such as those commonly found in a business environment. A state-of-the-art 'cyberspace cell' data visualisation technique was investigated and a powerful visualisation system using it was implemented. Although allowing databases to be explored and conclusions drawn, it had several drawbacks, the majority of which were due to the three-dimensional nature of the visualisation. A novel two-dimensional generic visualisation system, known as MADEN, was then developed and implemented, based upon a 2-D matrix of 'density plots'. MADEN allows an entire high-dimensional database to be visualised in one window, while permitting close analysis in 'enlargement' windows. Selections of records can be made and examined, and dependencies between fields can be investigated in detail. MADEN was used as a tool for investigating and assessing many data processing algorithms, firstly data-reducing (clustering) methods, then dimensionality-reducing techniques. These included a new 'directed' form of principal components analysis, several novel applications of artificial neural networks, and discriminant analysis techniques which illustrated how groups within a database can be separated. To illustrate the power of the system, MADEN was used to explore customer databases from two financial institutions, resulting in a number of discoveries which would be of interest to a marketing manager. Finally, the database of results from the 1992 UK Research Assessment Exercise was analysed. Using MADEN allowed both universities and disciplines to be graphically compared, and supplied some startling revelations, including empirical evidence of the 'Oxbridge factor'.

Evaluation and development of drainage and pipeline construction processes

In 1974 Dr D M Bramwell published his research work at the University of Aston a part of which was the establishment of an elemental work study data base covering drainage construction. The Transport and Road Research Laboratory decided to, extend that work as part of their continuing research programme into the design and construction of buried pipelines by placing a research contract with Bryant Construction. This research may be considered under two broad categories. In the first, site studies were undertaken to validate and extend the data base. The studies showed good agreement with the existing data with the exception of the excavation trench shoring and pipelaying data which was amended to incorporate new construction plant and methods. An inter-active on-line computer system for drainage estimating was developed. This system stores the elemental data, synthesizes the standard time of each drainage operation and is used to determine the required resources and construction method of the total drainage activity. The remainder of the research was into the general topic of construction efficiency. An on-line command driven computer system was produced. This system uses a stochastic simulation technique, based on distributions of site efficiency measurements to evaluate the effects of varying performance levels. The analysis of this performance data quantities the variability inherent in construction and demonstrates how some of this variability can be reconciled by considering the characteristics of a contract. A long term trend of decreasing efficiency with contract duration was also identified. The results obtained from the simulation suite were compared to site records collected from current contracts. This showed that this approach will give comparable answers, but these are greatly affected by the site performance parameters.

Trigeneration using biomass energy for sustainable development

Purpose: The paper aims to design and prove the concept of micro-industry using trigeneration fuelled by biomass, for sustainable development in rural NW India. Design/methodology/approach: This is being tested at village Malunga, near Jodhpur in Rajasthan. The system components comprise burning of waste biomass for steam generation and its use for power generation, cooling system for fruit ripening and the use of steam for producing distilled water. Site was selected taking into account the local economic and social needs, biomass resources available from agricultural activities, and the presence of a NGO which is competent to facilitate running of the enterprise. The trigeneration system was designed to integrate off-the-shelf equipment for power generation using boilers of approximate total capacity 1 tonne of fuel per hour, and a back-pressure steam turbo-generator (200 kW). Cooling is provided by a vapour absorption machine (VAM). Findings: The financial analysis indicates a payback time of less than two years. Nevertheless, this is sensitive to market fluctuations and availabilities of raw materials. Originality/value: Although comparable trigeneration systems already exist in large food processing industries and in space heating and cooling applications, they have not previously been used for rural micro-industry. The small-scale (1-2 m3/h output) multiple effect distillation (3 effect plus condenser) unit has not previously been deployed at field level. © Emerald Group Publishing Limited.