X-parameters based analytical design of non-linear microwave circuits Application to oscillator design

Resumen El diseño clásico de circuitos de microondas se basa fundamentalmente en el uso de los parámetros s, debido a su capacidad para caracterizar de forma exitosa el comportamiento de cualquier circuito lineal. La relación existente entre los parámetros s con los sistemas de medida actuales y con las herramientas de simulación lineal han facilitado su éxito y su uso extensivo tanto en el diseño como en la caracterización de circuitos y subsistemas de microondas. Sin embargo, a pesar de la gran aceptación de los parámetros s en la comunidad de microondas, el principal inconveniente de esta formulación reside en su limitación para predecir el comportamiento de sistemas no lineales reales. En la actualidad, uno de los principales retos de los diseñadores de microondas es el desarrollo de un contexto análogo que permita integrar tanto el modelado no lineal, como los sistemas de medidas de gran señal y los entornos de simulación no lineal, con el objetivo de extender las capacidades de los parámetros s a regímenes de operación en gran señal y por tanto, obtener una infraestructura que permita tanto la caracterización como el diseño de circuitos no lineales de forma fiable y eficiente. De acuerdo a esta filosofía, en los últimos años se han desarrollado diferentes propuestas como los parámetros X, de Agilent Technologies, o el modelo de Cardiff que tratan de proporcionar esta plataforma común en el ámbito de gran señal. Dentro de este contexto, uno de los objetivos de la presente Tesis es el análisis de la viabilidad del uso de los parámetros X en el diseño y simulación de osciladores para transceptores de microondas. Otro aspecto relevante en el análisis y diseño de circuitos lineales de microondas es la disposición de métodos analíticos sencillos, basados en los parámetros s del transistor, que permitan la obtención directa y rápida de las impedancias de carga y fuente necesarias para cumplir las especificaciones de diseño requeridas en cuanto a ganancia, potencia de salida, eficiencia o adaptación de entrada y salida, así como la determinación analítica de parámetros de diseño clave como el factor de estabilidad o los contornos de ganancia de potencia. Por lo tanto, el desarrollo de una formulación de diseño analítico, basada en los parámetros X y similar a la existente en pequeña señal, permitiría su uso en aplicaciones no lineales y supone un nuevo reto que se va a afrontar en este trabajo. Por tanto, el principal objetivo de la presente Tesis consistiría en la elaboración de una metodología analítica basada en el uso de los parámetros X para el diseño de circuitos no lineales que jugaría un papel similar al que juegan los parámetros s en el diseño de circuitos lineales de microondas. Dichos métodos de diseño analíticos permitirían una mejora significativa en los actuales procedimientos de diseño disponibles en gran señal, así como una reducción considerable en el tiempo de diseño, lo que permitiría la obtención de técnicas mucho más eficientes. Abstract In linear world, classical microwave circuit design relies on the s-parameters due to its capability to successfully characterize the behavior of any linear circuit. Thus the direct use of s-parameters in measurement systems and in linear simulation analysis tools, has facilitated its extensive use and success in the design and characterization of microwave circuits and subsystems. Nevertheless, despite the great success of s-parameters in the microwave community, the main drawback of this formulation is its limitation in the behavior prediction of real non-linear systems. Nowadays, the challenge of microwave designers is the development of an analogue framework that allows to integrate non-linear modeling, large-signal measurement hardware and non-linear simulation environment in order to extend s-parameters capabilities to non-linear regimen and thus, provide the infrastructure for non-linear design and test in a reliable and efficient way. Recently, different attempts with the aim to provide this common platform have been introduced, as the Cardiff approach and the Agilent X-parameters. Hence, this Thesis aims to demonstrate the X-parameter capability to provide this non-linear design and test framework in CAD-based oscillator context. Furthermore, the classical analysis and design of linear microwave transistorbased circuits is based on the development of simple analytical approaches, involving the transistor s-parameters, that are able to quickly provide an analytical solution for the input/output transistor loading conditions as well as analytically determine fundamental parameters as the stability factor, the power gain contours or the input/ output match. Hence, the development of similar analytical design tools that are able to extend s-parameters capabilities in small-signal design to non-linear ap- v plications means a new challenge that is going to be faced in the present work. Therefore, the development of an analytical design framework, based on loadindependent X-parameters, constitutes the core of this Thesis. These analytical nonlinear design approaches would enable to significantly improve current large-signal design processes as well as dramatically decrease the required design time and thus, obtain more efficient approaches.

Bio-inspired FPGA Architecture for Self-Calibration of an Image Compression Core based on Wavelet Transforms in Embedded Systems

A generic bio-inspired adaptive architecture for image compression suitable to be implemented in embedded systems is presented. The architecture allows the system to be tuned during its calibration phase. An evolutionary algorithm is responsible of making the system evolve towards the required performance. A prototype has been implemented in a Xilinx Virtex-5 FPGA featuring an adaptive wavelet transform core directed at improving image compression for specific types of images. An Evolution Strategy has been chosen as the search algorithm and its typical genetic operators adapted to allow for a hardware friendly implementation. HW/SW partitioning issues are also considered after a high level description of the algorithm is profiled which validates the proposed resource allocation in the device fabric. To check the robustness of the system and its adaptation capabilities, different types of images have been selected as validation patterns. A direct application of such a system is its deployment in an unknown environment during design time, letting the calibration phase adjust the system parameters so that it performs efcient image compression. Also, this prototype implementation may serve as an accelerator for the automatic design of evolved transform coefficients which are later on synthesized and implemented in a non-adaptive system in the final implementation device, whether it is a HW or SW based computing device. The architecture has been built in a modular way so that it can be easily extended to adapt other types of image processing cores. Details on this pluggable component point of view are also given in the paper.

1H HR MAS NMR metabolomic and non-destructive 2D NMR relaxometry to assess internal quality in apples.

NMR can be considered a multi-scale multidimensional technology in the sense that it provides both spatial insight at macroscopic (MRI) or microscopic level (relaxometry), together with chemical characterization (HR-MAS). In this study 296 apples (from 4 cultivars) were MRI screened (20 slices per fruit) among which 7 fruits were used for metabolomic study by 1H HR MAS in order to assess various chemical shifts: malic acid, sucrose, glucose, fructose and ethanol. On the first season, tissue samples were taken from the sound and affected apples (near the core, centre and outer part of the mesocarp) belonging to sound and affected locations, while on the second season, tissue samples were focused on the comparison between sound and affected tissue. Beside, MRI and 2D non-destructive relaxometry (on whole fruits, and localized tissue) where performed on 72 and 12 apples respectively in order to compare features at macroscopic (tissue) and microscopic (subcellular) level. HR MAS shows higher content of ?-glucose, ?-glucose, malic acid and aromatic compounds in watercore affected tissues from both seasons, while sound tissue reflects higher sucrose. Microscopic (subcellular) degradation of tissue varies according to disorder development and is in good accordance with macroscopic characterization with MRI.

Gestión de ideas innovadoras

El trabajo de fin de grado que se va a definir detalladamente en esta memoria, trata de poner de manifiesto muchos de los conocimientos que he adquirido a lo largo de la carrera, aplicándolos en un proyecto real. Se ha desarrollado una plataforma capaz de albergar ideas, escritas por personas de todo el mundo que buscan compartirlas con los demás, para que estas sean comentadas, valoradas y entre todos poder mejorarlas. Estas ideas pueden ser de cualquier ámbito, por tanto, se da la posibilidad de clasificarlas en las categorías que mejor encajen con la idea. La aplicación ofrece una API RESTful muy descriptiva, en la que se ha identificado y estructurado cada recurso, para que a través de los “verbos http” se puedan gestionar todos los elementos de una forma fácil y sencilla, independientemente del cliente que la utilice. La arquitectura está montada siguiendo el patrón de diseño modelo vista-controlador, utilizando las últimas tecnologías del mercado como Spring, Liferay, SmartGWT y MongoDB (entre muchas otras) con el objetivo de crear una aplicación segura, escalable y modulada, por lo que se ha tenido que integrar todos estos frameworks. Los datos de la aplicación se hacen persistentes en dos tipos de bases de datos, una relacional (MySQL) y otra no relacional (MongoDB), aprovechando al máximo las características que ofrecen cada una de ellas. El cliente propuesto es accesible mediante un navegador web, se basa en el portal de Liferay. Se han desarrollado varios “Portlets o Widgets”, que componen la estructura de contenido que ve el usuario final. A través de ellos se puede acceder al contenido de la aplicación, ideas, comentarios y demás contenidos sociales, de una forma agradable para el usuario, ya que estos “Portlets” se comunican entre sí y hacen peticiones asíncronas a la API RESTful sin necesidad de recargar toda la estructura de la página. Además, los usuarios pueden registrarse en el sistema para aportar más contenidos u obtener roles que les dan permisos para realizar acciones de administración. Se ha seguido una metodología “Scrum” para la realización del proyecto, con el objetivo de dividir el proyecto en tareas pequeñas y desarrollarlas de una forma ágil. Herramientas como “Jenkins” me han ayudado a una integración continua y asegurando mediante la ejecución de los test de prueba, que todos los componentes funcionan. La calidad ha sido un aspecto principal en el proyecto, se han seguido metodologías software y patrones de diseño para garantizar un diseño de calidad, reutilizable, óptimo y modulado. El uso de la herramienta “Sonar” ha ayudado a este cometido. Además, se ha implementado un sistema de pruebas muy completo de todos los componentes de la aplicación. En definitiva, se ha diseñado una aplicación innovadora de código abierto, que establece unas bases muy definidas para que si algún día se pone en producción, sirva a las personas para compartir pensamientos o ideas ayudando a mejorar el mundo en el que vivimos. ---ABSTRACT---The Final Degree Project, described in detail in this report, attempts to cover a lot of the knowledge I have acquired during my studies, applying it to a real project. The objective of the project has been to develop a platform capable of hosting ideas from people all over the world, where users can share their ideas, comment on and rate the ideas of others and together help improving them. Since these ideas can be of any kind, it is possible to classify them into suitable categories. The application offers a very descriptive API RESTful, where each resource has been identified and organized in a way that makes it possible to easily manage all the elements using the HTTP verbs, regardless of the client using it. The architecture has been built following the design pattern model-view-controller, using the latest market technologies such as Spring, Liferay, Smart GWT and MongoDB (among others) with the purpose of creating a safe, scalable and adjustable application. The data of the application are persistent in two different kinds of databases, one relational (MySQL) and the other non-relational (MongoDB), taking advantage of all the different features each one of them provides. The suggested client is accessible through a web browser and it is based in Liferay. Various “Portlets" or "Widgets” make up the final content of the page. Thanks to these Portlets, the user can access the application content (ideas, comments and categories) in a pleasant way as the Portlets communicate with each other making asynchronous requests to the API RESTful without the necessity to refresh the whole page. Furthermore, users can log on to the system to contribute with more contents or to obtain administrator privileges. The Project has been developed following a “Scrum” methodology, with the main objective being that of dividing the Project into smaller tasks making it possible to develop each task in a more agile and ultimately faster way. Tools like “Jenkins” have been used to guarantee a continuous integration and to ensure that all the components work correctly thanks to the execution of test runs. Quality has been one of the main aspects in this project, why design patterns and software methodologies have been used to guarantee a high quality, reusable, modular and optimized design. The “Sonar” technology has helped in the achievement of this goal. Furthermore, a comprehensive proofing system of all the application's components has been implemented. In conclusion, this Project has consisted in developing an innovative, free source application that establishes a clearly defined basis so that, if it someday will be put in production, it will allow people to share thoughts and ideas, and by doing so, help them to improve the World we live in.

Optimization of multidimensional cross-section tables for few-group core calculations

Multigroup diffusion codes for three dimensional LWR core analysis use as input data pre-generated homogenized few group cross sections and discontinuity factors for certain combinations of state variables, such as temperatures or densities. The simplest way of compiling those data are tabulated libraries, where a grid covering the domain of state variables is defined and the homogenized cross sections are computed at the grid points. Then, during the core calculation, an interpolation algorithm is used to compute the cross sections from the table values. Since interpolation errors depend on the distance between the grid points, a determined refinement of the mesh is required to reach a target accuracy, which could lead to large data storage volume and a large number of lattice transport calculations. In this paper, a simple and effective procedure to optimize the distribution of grid points for tabulated libraries is presented. Optimality is considered in the sense of building a non-uniform point distribution with the minimum number of grid points for each state variable satisfying a given target accuracy in k-effective. The procedure consists of determining the sensitivity coefficients of k-effective to cross sections using perturbation theory; and estimating the interpolation errors committed with different mesh steps for each state variable. These results allow evaluating the influence of interpolation errors of each cross section on k-effective for any combination of state variables, and estimating the optimal distance between grid points.

Evolving a core Banking enterprise architecture: leveraging business events exploitation

Business information has become a critical asset for companies and it has even more value when obtained and exploited in real time. This paper analyses how to integrate this information into an existing banking Enterprise Architecture, following an event-driven approach, and entails the study of three main issues: the definition of business events, the specification of a reference architecture, which identifies the specific integration points, and the description of a governance approach to manage the new elements. All the proposed solutions have been validated with a proof-of-concept test bed in an open source environment. It is based on a case study of the banking sector that allows an operational validation to be carried out, as well as ensuring compliance with non-functional requirements. We have focused these requirements on performance.

La invención en la obra de Julio Lafuente: entre la utopía y la construcción

La obra de Julio Lafuente es extraordinariamente abundante y heterogenea, de un experimentalismo tan admirable en casos particulares como difícilmente caracterizable en su conjunto. El inventario ha revelado la existencia de más de 360 proyectos, de los que cerca de 200 están construidos, e incluye obras de arquitectura, urbanismo, escenografía y mobiliario, muchas de ellas reconocidas internacionalmente y profusamente publicadas entre 1950 y 1980. Es decir, nos encontramos ante un panorama de producción, divulgación y reconocimiento de su obra en el pasado reciente que contrasta con el actual desconocimiento de la misma. Situación que esta tesis doctoral pretende revertir. La investigación se articula en dos partes. La primera de ellas constituye el núcleo argumental y se compone de cuatro capítulos que permiten comprender el carácter de la obra de Julio Lafuente: su biografía profesional, una panorámica contextualizada de su obra, el estudio en profundidad de dos obras escogidas y la revisión transversal de los aspectos más relevantes en su arquitectura. Este primer volumen incluye dos capítulos adicionales: una bibliografía exhaustiva de sus obras y la traducción de publicaciones específicas coetáneas, recogidas en un anexo. La segunda parte consiste en una catalogación de la obra de Julio Lafuente, inexistente hasta la fecha, desarrollada por la autora en paralelo a su participación en la realización del Archivo de Julio Lafuente en Roma, lo que ha facilitado el acceso directo a la documentación original. Una revisión panorámica de diversas obras de Lafuente en relación con otras obras y corrientes de pensamiento coetáneas ha permitido comprender la pertenencia inequívoca de la obra de Julio Lafuente a su contexto: fundamentalmente, la Italia del período comprendido entre 1950 y 1980, un contexto del que se nutre y al que contribuye sin descanso. La mayor parte de la abundante obra arquitectónica de Lafuente se dedica al desarrollo de edificios de vivienda, normalmente construidos en los ensanches de Roma. En el conjunto de esta prolija trayectoria sobresalen, sin embargo, algunos logros extraordinarios que han permitido apoyar el desarrollo argumental de la investigación. Entre ellos, se han escogido para su estudio en profundidad dos obras —el hotel en la roca (1967), en Gozo (Malta) y el hipódromo de Tor di Valle (1959), en Roma—, que constituyen sendos casos singulares en los que Lafuente alcanza las cotas más altas de coherencia, significación y calidad arquitectónica, y que caracterizan el marco en el que se desarrolla la investigación: entre la utopía y la construcción. Al mismo tiempo, se trata de dos obras complementarias que llevan al extremo algunos de los aspectos a los que Julio Lafuente presta más atención en el conjunto de su obra, como la relación con el lugar, la invención estructural o el cuidado de los detalles constructivos. Estos rasgos se han revisado de un modo transversal en el último capítulo, incidiendo en algunos casos particulares que, a modo de metonimia, han permitido tomar la parte por el todo. La investigación confirma el compromiso de la obra de Lafuente con la lógica constructiva, si bien la componente idealizada se reconoce, aunque en un tono menor respecto al empeño constructivo, en una gran parte su arquitectura. Esta tendencia a la idealización es, posiblemente, una de las razones que ha llevado a quienes hasta hoy han escrito sobre su obra, a especular con las ideas de invención y utopía en la arquitectura de Julio Lafuente. El catálogo inédito de la obra de Julio Lafuente constituye la segunda parte de la tesis doctoral y permite realizar consultas posteriores que puedan dar continuidad a la investigación aquí iniciada. ABSTRACT The architectural work of Julio Lafuente is extraordinary wide and heterogeneous, of so admirable experimentalism in particular cases as difficult to be characterized as a whole. The inventory of his work has revealed the existence of more than 360 projects, of which about 200 are built, including works of architecture, urban planning, scenery and furniture, many of which were internationally recognized and widely published between 1950 and 1980. This overview of production, spread and recognition of his work in the recent past hugely contrasts with the current lack of knowledge of it. Situation that this PhD thesis aims to reverse. The thesis is divided into two parts. The first part is the core argument and comprises four sections that provide insights into the nature of the work of Julio Lafuente: professional biography, a contextualized view of his work, in-depth study of two selected works and cross review of the most relevant aspects in his architecture. This volume includes an exhaustive bibliography and translation of contemporaneous specific publications, incorporated in an annex. The second part consists of a catalog of the work of Julio Lafuente, non-existent to date, developed in parallel with the participation of the author in the making process of the Archive of Julio Lafuente in Rome, which has provided access to the original documentation. Research develops a wide-ranging approach to the architecture of Julio Lafuente in its context. To this purpose, various of his works have been reviewed in relation to other contemporary works, which have revealed a direct attachment of Lafuente’s work to its context: mainly Italy, for the period between 1950 and 1980. Most of his wide architectural work is related to housing projects, usually built in the extensions of Rome. In this broad regular work, however, highlight some outstanding achievements which have given support to the research argumental line. Among them, two works have been selected for an in-depth study: the hotel in the Maltese rock of Gozo (1967) and the Tor di Valle racecourse building (1959) in Rome. Both are individual cases in which Lafuente reaches the highest levels of coherence, significance and architectural quality, and both characterize the frame in which this research takes place: between utopia and construction. These selected projects are two complementary works that embody some of the aspects to which Julio Lafuente pays more attention, such as the experiencing of place, the structural invention or concern for construction details, among others. These features have been reviewed through a transversal regard in the last chapter, focusing on some particular cases, in the way in which metonymy is used, allowing to take the part for the whole. Research confirms that the work of Julio Lafuente stands out for its commitment to construction logic, while the idealized component is recognized, although in a minor key with respect to constructive engagement, in most of his architecture from the beginning to his latest proposals. This tendency to idealization is probably one of the reasons that has often led to those who have written about him, to speculate on the ideas of invention and utopia in the work of Julio Lafuente. The unpublished catalog of the work of Julio Lafuente, which constitutes the second part of the thesis, presents the architectural work of Julio Lafuente and allows further research that could continue the one started here.

Analisi di un Incidente Non Mitigato di Tipo LOCA in un Reattore PWR Mediante il Codice MELCOR 2.1

La presente attività di tesi è stata svolta presso la Divisione di Sicurezza Nucleare dell’ENEA di Bologna ed è stata finalizzata ad analizzare, mediante il codice MELCOR 2.1, le conseguenze di tre incidenti severi non mitigati di tipo LBLOCA in un generico reattore nucleare ad acqua leggera pressurizzata (PWR) da 900 MWe. In particolare sono stati confrontati gli scenari incidentali relativi a tre distinti eventi iniziatori nel circuito di refrigerazione primario: la rottura a ghigliottina della gamba fredda (CL) del loop 1, della gamba calda (HL) del loop 1 e della surge line di connessione con il pressurizzatore. Le analisi MELCOR hanno indagato la progressione incidentale in-vessel, con particolare riferimento alle fenomenologie termoidrauliche e di degradazione del core. MELCOR infatti è un codice integrato che simula le principali fenomenologie riguardanti sequenze incidentali di tipo severo in reattori ad acqua leggera. Durante la prima fase dei tre transitori incidentali risultano predominanti fenomenologie di carattere termoidraulico. In particolare MELCOR predice la rapida depressurizzazione e il conseguente svuotamento del sistema di refrigerazione primario. I tre transitori sono poi caratterizzati dallo scoprimento completo del core a causa dell’indisponibilità del sistema di refrigerazione di emergenza. Il conseguente riscaldamento del core per il calore di decadimento e per ossidazione delle strutture metalliche conduce inevitabilmente alla sua degradazione e quindi al fallimento della lower head del recipiente in pressione del reattore nei tre scenari incidentali in tempi diversi. Durante la prima fase incidentale, di carattere prevalentemente termoidraulico, sono state rilevate le principali differenze fenomenologiche causate dalle differenti posizioni e dimensioni delle rotture. Il transitorio causato dalla rottura della CL si è confermato come il più gravoso, con fallimento anticipato della lower head rispetto agli altri due transitori considerati.

Semiquantitative occurence of various minerals in sediment core CRP-2A

The mineralogy of the lower Oligocene to Quaternary sediments of core CRP-2/2A drilled on the continental shelf of McMurdo Sound in Ross Sea, Antarctica, was examined by the X-ray diffraction method. Quartz, plagioclase feldspar and K-feldspar are the most important non-clay minerals. Pyroxene and amphibole occur in minor amounts throughout the core. The composition of the sediments points to an origin in the Transantarctic Mountains for the majority of the detrital components. There, the plutonic and metamorphic rocks of the basement, the sediments of the Beacon Supergroup and the volcanic rocks of the Ferrar Group could serve as possible source lithologies. The distribution of the detrital minerals reflects a long-term history of successive erosion and valley incision. During the deposition of the lower part of the core, the detrital minerals were probably mainly derived from the sediments of the Beacon Supergroup, as indicated by the high quartz but relatively low feldspar abundances. In the upper c. 350 m of the core, the influence of a source in the basement became stronger and results in lower quartz contents but increasing abundance of feldspar. Some diagenetic alteration of the sediments is indicated by the occurrence of zeolites below c. 320 mbsf and of opal-CT above c. 320 mbsf.

Pollen profile from sediment core KB1, Holzminden, Northern Germany

The Nachtigall clay pit near Holzminden, northern Germany, is located in a subrosional basin filled with 43 m of interglacial, interstadial and stadial deposits adjacent to the Weser River. The succession separates the Older Middle Terrace from the Younger Middle Terrace of the Weser River. Nachtigall core KB1 (1998) mainly contains silt and clay with intercalated peat layers. The layers of fen peat and intercalated humic silt are between 36 and 22.5 m depth. According to palynological studies, the peat layers and some humic silts were deposited during interglacial and interstadial periods marked by forest vegetation, termed Nachtigall 1 and Nachtigall 2. They are subdivided by a stadial, termed Albaxen. The peat of Nachtigall 1 is interrupted twice by silt and clay strata (Allochthonous Unit I, II) which are reworked sediments of older glacial periods, possibly of late Elsterian or early Holsteinian age. The palynological sequences of Nachtigall and Göttingen/Ottostrasse show the same pattern. Moreover, the contemporaneous pollen profiles of Nachtigall and Göttingen/Ottostrasse can be compared with the Velay pollen sequence (France). The Nachtigall core section 36-26.02 m corresponds to Bouchet 2 - Bonnefond - Bouchet 3 in Velay. The profiles of Velay and Nachtigall are independently correlated to the MIS-timescale and correspond to MIS 7c, 7b, and 7a. TIMS 230Th/U-dating shows ages ranging from 227 + 9/-8 to 201 + 15/-13 ka, which are in good agreement with the inferred MIS 7 age.