The potential impact of Ocean Thermal Energy Conversion (OTEC) on fisheries

The commercial development of ocean thermal energy conversion (OTEC) operations will involve some environmental perturbations for which there is no precedent experience. The pumping of very large volumes of warm surface water and cold deep water and its subsequent discharge will result in the impingement, entrainment, and redistribution of biota. Additional stresses to biota will be caused by biocide usage and temperature depressions. However, the artificial upwelling of nutrients associated with the pumping of cold deep water, and the artificial reef created by an OTEC plant may have positive effects on the local environment. Although more detailed information is needed to assess the net effect of an OTEC operation on fisheries, certain assumptions and calculations are made supporting the conclusion that the potential risk to fisheries is not significant enough to deter the early development of IDEe. It will be necessary to monitor a commercial-scale plant in order to remove many of the remaining uncertainties. (PDF file contains 39 pages.)

Effective and Robust Generalized Predictive Speed Control of Induction Motor

14 p.

Simulierte Auswirkungen des mehrjährigen Bewirtschaftungsplans für die Dorschfischerei in der westlichen Ostsee und die Möglichkeit einer technischen Alternative

The cod stock in the Western Baltic Sea is assessed to be overfished regarding the definitions of the UN World Summit on Sustainable Development at Johannesburg in 2002. Thus, the European Fisheries Council enforced a multi-annual management plan in 2007. Our medium term simulations over the future 10 years assume similar stock productivity as compared with the past four decades and indicate that the goals of the management plan can be achieved through TAC and consistent effort regulations. Taking account of the uncertainty in the recruitment patterns, the target average fishing mortality of age groups 3 – 6 years of F = 0.6 per year as defined in the management plan is indicated to exceed sustainable levels consistent with high long term yields and low risk of depletion. The stipulated constraint of the annual TAC variations of ±15% will dominate future fisheries management and implies a high recovery potential of the stock through continued reductions in fishing mortality. The scientific assessment of sustainable levels of exploitation and consideration in the plan is strongly advised, taking account of uncertainties attributed to environmental and biological effects. We recommend our study to be complemented with economic impact assessments including effects on by-catch species, which have been disregarded in this study. It is further demonstrated, that the goals of the management plan can alternatively be achieved by mesh size adaptations. An alternative technical option of mesh size increases to realize the required reductions in fishing mortality provides avoidance of discards of undersized fish after a few years by means of improved selectivity, another important element of the Common Fisheries Policy. However, it is emphasized that technical regulations since 1990 failed to affect the by-catch and discards of juvenile cod. In any way, the meaningful implementation of the multiannual management plan through stringent control and enforcement appears critical.

Sliding Mode Control Strategy for Wind Turbine Power Maximization

The efficiency of the wind power conversions systems can be greatly improved using an appropriate control algorithm. In this work, a sliding mode control for variable speed wind turbine that incorporates a doubly fed induction generator is described. The electrical system incorporates a wound rotor induction machine with back-to-back three phase power converter bridges between its rotor and the grid. In the presented design the so-called vector control theory is applied, in order to simplify the electrical equations. The proposed control scheme uses stator flux-oriented vector control for the rotor side converter bridge control and grid voltage vector control for the grid side converter bridge control. The stability analysis of the proposed sliding mode controller under disturbances and parameter uncertainties is provided using the Lyapunov stability theory. Finally simulated results show, on the one hand, that the proposed controller provides high-performance dynamic characteristics, and on the other hand, that this scheme is robust with respect to the uncertainties that usually appear in the real systems.

Valuing Expansions of the Electricity Transmission Network under Uncertainty: The Binodal Case

Transmission investments are currently needed to meet an increasing electricity demand, to address security of supply concerns, and to reach carbon-emissions targets. A key issue when assessing the benefits from an expanded grid concerns the valuation of the uncertain cash flows that result from the expansion. We propose a valuation model that accommodates both physical and economic uncertainties following the Real Options approach. It combines optimization techniques with Monte Carlo simulation. We illustrate the use of our model in a simplified, two-node grid and assess the decision whether to invest or not in a particular upgrade. The generation mix includes coal-and natural gas-fired stations that operate under carbon constraints. The underlying parameters are estimated from observed market data.

Robust speed control for a variable speed wind turbine

Modern wind turbines are designed in order to work in variable speed opera-tions. To perform this task, these turbines are provided with adjustable speed generators, like the double feed induction generator (DFIG). One of the main advantages of adjustable speed generators is improving the system efficiency compared with _xed speed generators, because turbine speed can be adjusted as a function of wind speed in order to maximize the output power. However, this system requires a suitable speed controller in order to track the optimal reference speed of the wind turbine. In this work, a sliding mode control for variable speed wind turbines is proposed. The proposed design also uses the vector oriented control theory in order to simplify the DFIG dynamical equations. The stability analysis of the proposed controller has been carried out under wind variations and pa-rameter uncertainties using the Lyapunov stability theory. Finally, the simulated results show on the one hand that the proposed controller provides a high-performance dynamic behavior, and on the other hand that this scheme is robust with respect to parameter uncertainties and wind speed variations, which usually appear in real systems.

Sliding mode position control for real-time control of induction motors

A sliding mode position control for high-performance real-time applications of induction motors in developed in this work. The design also incorporates a simple flux estimator in order to avoid the flux sensors. Then, the proposed control scheme presents a low computational cost and therefore can be implemented easily in a real-time applications using a low cost DSP-processor. The stability analysis of the controller under parameter uncertainties and load disturbances in provided using Lyapunov stability theory. Finally, simulated and experimental results show that the proposed controller with the proposed observer provides a good trajectory tracking and that this scheme is robust with respect to plant parameter variations and external load disturbances.

Adaptive variable structure control law for a variable speed wind turbine

Presentado en el 13th WSEAS International Conference on Automatic Control, Modelling and Simulation, ACMOS'11

Sliding mode control law for a variable speedwind turbine

Modern wind turbines are designed in order to work in variable speed operations. To perform this task, wind turbines are provided with adjustable speed generators, like the double feed induction generator. One of the main advantage of adjustable speed generators is improving the system efficiency compared to fixed speed generators, because turbine speed can be adjusted as a function of wind speed in order to maximize the output power. However this system requires a suitable speed controller in order to track the optimal reference speed of the wind turbine. In this work, a sliding mode control for variable speed wind turbines is proposed. An integral sliding surface is used, because the integral term avoids the use of the acceleration signal, which reduces the high frequency components in the sliding variable. The proposed design also uses the vector oriented control theory in order to simplify the generator dynamical equations. The stability analysis of the proposed controller has been carried out under wind variations and parameter uncertainties by using the Lyapunov stability theory. Finally simulated results show, on the one hand that the proposed controller provides a high-performance dynamic behavior, and on the other hand that this scheme is robust with respect to parameter uncertainties and wind speed variations, that usually appear in real systems.

An adaptive sliding mode control law for the power maximization of the wind turbine system

POWERENG 2011

Sliding mode control strategy for variable speed wind turbines

EFTA 2009

A robust position control for induction machines

ICEM 2010

Zustand der Herings- und Sprottenbestände in Nord- und Ostsee, östlichem Kanal und westlichen britischen Gewässern. Beurteilung durch die Herings- und Ostsee-Arbeitsgruppe des ICES, März/April 1999

Information is given about the results of the latest meeting of the Herring Assessment Working Group for the Area South of 62° N and the Baltic Fisheries Assessment Working Group, which were conducted in March and April at ICES headquarters in Copenhagen. The actual stock development and the catch options estimated for different assessment units of herring and sprat are presented. The spawning stock size of North Sea herring reached in 1998 for the first time since 1991 a level above the Minimum Biological Acceptable Level (MBAL) of 800 000 t. Keeping the fishery at the present level the spawning stock size should reach in 1999 a level of about 1.2 mio. t. For the Western Baltic Spring spawning herring stock no actual stock estimate was presented. Due to uncertainties in splitting the catches in North Sea autumn and Baltic spring spawners no analytical assessment was accepted.

Aktuelle Entwicklung der Herings- und Sprottenbestände südlich des 62. Breitengrades

Information is given about the last meeting of the ICES “Herring Assessment Working Group for the Area South of 62° N”, conducted from 9.-18. March 1998 in Copenhagen. The actual stock development and the catch option estimations for different assessment units of herring and sprat are presented. The spawning stock size of North Sea herring was in 1997 still below the “Minimum Biological Acceptable Level” (MBAL) of 800 000 t. Keeping the fishing mortalities at the present level, the spawning stock size should reach a level of about 1.1 million tons by end of 1998. For the Western Baltic pring spawning herring stock no actual stock parameters were estimated. Due to uncertainties in splitting the catches in North sea autumn and Baltic spring spawners no analytical assessment was accepted.