913 resultados para Functionalized
Resumo:
A superhydrophobic surface has many advantages in micro/nanomechanical applications, such as low adhesion, low friction and high restitution coefficient, etc. In this paper, we introduce a novel and simple route to fabricate superhydrophobic surfaces using ZnO nanocrystals. First, tetrapod-like ZnO nanocrystals were prepared via a one-step, direct chemical vapor deposition (CVD) approach. The nanostructured ZnO material was characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD) and the surface functionalized by aminopropyltriethoxysilane (APS) was found to be hydrophobic. Then the superhydrophobic surface was constructed by depositing uniformly ZnO hydrophobic nanoparticles (HNPs) on the Poly(dimethylsiloxane) (PDMS) film substrate. Water wettability study revealed a contact angle of 155.4 +/- 2 degrees for the superhydrophobic surface while about 110 degrees for pure smooth PDMS films. The hysteresis was quite low, only 3.1 +/- 0.3 degrees. Microscopic observations showed that the surface was covered by micro- and nano-scale ZnO particles. Compared to other approaches, this method is rather convenient and can be used to obtain a large area superhydrophobic surface. The high contact angle and low hysteresis could be attributed to the micro/nano structures of ZnO material; besides, the superhydrophobic property of the as-constructed ZnO-PDMS surface could be maintained for at least 6 months. (C) Koninklijke Brill NV, Leiden, 2010
Resumo:
Mannich反应是有机化学中最重要的碳-碳键形成反应,其产物是合成手性胺的通用中间体。间接Mannich反应使用不稳定的预制烯醇等当体,以未修饰的酮为给体的直接方法将增强Mannich反应的效率。针对低活性苯乙酮、氨甲酸酯参与的直接Mannich反应,研究工作将更具挑战性。 在前期实验中,我们发现Lewis酸-NbCl5可高效催化苯乙酮、芳香醛、芳香胺三组分直接Mannich反应,反应在环境温度下进行,高收率获得Mannich碱。这是以苯乙酮参与的Mannich反应中,实现催化量Lewis酸催化的首次报道。该方法高效且操作简单。但就底物而言,对易去保护、低活性的氨甲酸酯类底物收率较低。我们设想Brønst酸可解决此类底物问题。令人高兴的是,杂多酸可高效催化芳香酮、芳香醛、氨甲酸酯三组分直接Mannich反应,反应在环境温度下进行,高收率获得N-保护的β-氨基酮。该方法底物范围广泛,普适性强且催化剂便宜。 基于杂多酸在苯乙酮、氨甲酸酯为底物直接Mannich反应中的高效性,我们设想杂多酸与功能化的手性有机小分子-手性伯胺组装可解决催化剂回收问题,同时实现不对称催化。实验结果表明,非共价键固载手性伯胺不能有效催化苯乙酮为底物的直接Mannich反应,无论是对映选择性还是收率均较低。随后,我们以丙二酸酯及α-氨基砜为底物,以增强底物活性,同时绕开亚胺的不稳定性。辛可宁伯胺以氢键双活化底物,有效催化原位产生氨甲酸酯类亚胺与丙二酸酯的Mannich反应,高收率获得Mannich碱,ee值中等。 我们采用逐步解决问题的策略解决Mannich反应中的部分问题并在Lewis酸催化、Brønst酸催化、非共价键固载手性伯胺催化及手性伯胺氢键催化的直接Mannich反应中做出了有益探索。 The Mannich reactions are among the most fundamental carbon-carbon bond forming reactions in organic chemistry, and the reaction products are versatile intermediates in the synthesis of chiral amines. The indirect Mannich reaction uses preformed enolate equivalents. However the preformed enolates are unstable. Thus, a direct methodology based on unmodified ketone donors would enhance the efficiency of the Mannich reaction. Especially researches for the directed Mannich reactions of acetophenone, carbamate, which own lower activities, will be more challengeable. In the initial experiments, we found an efficient Lewis acid-NbCl5 which could catalyze three-component Mannich-type reaction of acetophenone, aromatic aldehydes and aromatic amines at ambient temperature in high yields. This is the first report that use catalytic amount of Lewis acid in the Mannich reactions of .acetophenone. The method reported is not only simple to operate but also efficient. However, as far as amines are concerned, the substrates of carbamates which can be deprotected more easily and less reactive than amines give low yields. We envisaged that Brønsted acid would resolve this problem. Pleasingly, heteropoly acids (HPA) efficiently catalyzed one-pot three-component Mannich reactions of aryl aldehydes, aryl ketones, and carbamates at ambient temperature and afforded the corresponding N-protected β-amino ketones in good to excellent yields. This method provides a novel and improved modification of three-component Mannich reactions in terms of a wide scope of aldehydes, ketones and carbamates, economic viability. Based on the high efficiency of heteropoly acids in the Mannich reaction of acetophenone and carbamates, we envisaged that if HPA were combined with functionalized chiral organocatalysts–chiral primary amines the assemblies may be able to act as recoverable asymmetric organocatalysts. The results of exprimentals showed that noncovalently supported heterogeneous chiral primary amine couldn’t effectively catalyze the Mannich reactions which own two the substrate of acetophenone regardless of enantioselectivity and yield. Then, we employed malonates and α-amido sulfones as substrates to enhance reactivity of substrates and circumvent the instability of imines. A moderately enantioselective and highly yield Mannich reaction with in situ generation of carbamate-protected imines from stable α-amido sulfones catalyzed by cinchonine primary amine catalyst was developed. It is noteworthy that cinchonine primary amine can dual activate substrates through H-bond activation and thus promote the reaction. We applied step-by-step-strategy to resolve some problems in the Mannich reactions and did some instructive explorations in Lewis acid catalysis, Brønst acid catalysis, noncovalently supported heterogeneous chiral primary amine catalysis and chiral primary amine as hydrogen-bond catalysis.
Resumo:
Here we prepare carbon nanotubes modified with ammonium persulfate, very short carbon nanotubes with 50-100 nanometer length was obtained, and the higher P potential of 52 mV was detected, these supporting the successful modification. HeLa cells were irradiated with P rays via adding or absent above functionalized carbon nanotubes (f- WCNTs) into cell culture medium with different concentration and radiation dosage. Confocal microscopy images and fluorescence-labeled DNA detection verified the successfully pure multi-walled carbon nanotubes (p-WCNTs) and f-WCNTs penetrated into cells. Compared with pure radiation, by MTT test, f-WCNTs induced cell death markedly with about 8.7 times higher than former one under little dose of radiation; meanwhile, no obvious toxicity was observed both in p-WCNTs and f-WCNTs without of radiation exposure. We hypothesized that large amount of hydroxyl and carbonyl organs on the surface of very short f-WCNTs changed into free radicals result from radiations led cell damage. These implied that f-WCNTs could be regarded as a new radiosensitizer.
Resumo:
Due to a low mineral content, the sapropelic sediments depositing in Mangrove Lake, Bermuda, provide an excellent opportunity to explore for possible additions of sulfur to organic matter during the early stages of diagenesis. We evaluated early diagenetic organic sulfur transformations by monitoring the concentrations and stable isotopic compositions of a number of inorganic and organic sulfur pools, thereby accounting for all of the sulfur in the sediments. We have identified and quantified the following sulfur pools: porewater sulfate, porewater sulfide, elemental sulfur, pyrite sulfur, hydrolyzable organic sulfur (HYOS), chromium-reducible organic sulfur (CROS), and nonchromium-reducible organic sulfur (Non-CROS). Of the organic sulfur pools, the Non-CROS pool is by far the largest, followed by CROS, and finally HYOS. By 60 cm depth these pools contribute, respectively, to 85, 7.9, and 3.6% of the total solid phase sulfur. The HYOS pool is probably of biological origin and shows no interaction with the sulfur compounds produced during diagenesis. By contrast, CROS is produced, most likely, from the diagenetic addition of polysulfides to functionalized lipids in the upper, H2S-poor, elemental sulfur-rich, region of the sediment. A portion of this sulfur pool is unstable and decomposes on contact with the H2S-rich porewaters. The portion of CROS that remains in the sulfidic waters appears to readily exchange sulfur isotopes with H2S. While some of the Non-CROS pool is of biological origin, some is also formed by the diagenetic addition of sulfur to organic compounds in the upper H2S-poor region of the sediment. By contrast with CROS, Non-CROS is not diagenetically active in the H2S-rich porewaters. Overall, somewhere between 27 and 53 % of the organic sulfur buried in Mangrove Lake sediments is of diagenetic origin, with the remaining organic sulfur derived from biosynthesis. We extrapolate our Mangrove Lake results and calculate that in typical coastal marine sediments between 11 and 29 μmol g−1 of organic sulfur will form during early diagenesis, of which 2–5 μmol g−1 will be chromium reducible.
Resumo:
With the target to design and develop new functionalized green triplet light emitters that possess distinctive electronic properties for robust and highly efficient phosphorescent organic light-emitting diodes (PHOLEDs), a series of bluish-green to yellow-green phosphorescent tris-cyclometalated homoleptic iridium(III) complexes [Ir(ppy-X)(3)] (X=SiPh3, GePh3, NPh2, POPh2, OPh, SPh, SO2Ph, Hppy=2-phenylpyridine) have been synthesized and fully characterized by spectroscopic, redox, and photophysical methods
Resumo:
We present a newly designed colormetric sensor sensitive to pH value based on a gold nanocomposite composed of gold nanoparticles and pH-sensitive polymer{dodecylthioether end functionalized poly[2-(diethlamino) ethyl methacrylate], poly(DEAEMA)-DDT}. We have shown that this design can produce stable GNP precipitate under weakly basic condition(pH=7.5) and this precipitate can be dispersed in acidic solution(pH=4.0), due to the 2-(diethylamino) ethyl methacrylate protonated by H+.
Resumo:
We functionalize the focal group of hyperbranched poly(phenylene sulfide) (HPPS) with benzyl, phenyl, and naphthyl group, respectively. DSC analysis shows that T-g of HPPS is increased from 55 to 93 degrees C by functionalization of the focal group with a conjugated naphthyl group. The fluorescence properties of the three core-functionalized HPPS' are studied under the comparison with the original HPPS.
Resumo:
Here, we report a sensitive amplified electrochemical impedimetric aptasensor for thrombin, a kind of serine protease that plays important role in thrombosis and haemostasis. For improving detection sensitivity, a sandwich sensing platform is fabricated, in which the thiolated aptamers are firstly immobilized on a gold substrate to capture the thrombin molecules, and then the aptamer functionalized Au nanoparticles (AuNPs) are used to amplify the impedimetric signals.
Resumo:
A one-compartment glucose/O-2. biofuel cell based on an electrostatic layer-by-layer (LbL) technique on three-dimensional ordered macroporous (3DOM) gold electrode was described. A 3DOM gold electrode was synthesized electrochemically by an inverted colloidal crystal template technique. Then the macroporous gold electrodes were functionalized with Au nanoparticles (AuNPs) and enzyme, glucose dehydrogenase (GDH) or laccase.
Resumo:
A NADH and glucose biosensor based on thionine cross-linked multiwalled carbon nanotubes (MWNTs) and Au nanoparticles (Au NPs) multilayer functionalized indium-doped tin oxide (ITO) electrode were presented in this paper. The effect of light irradiation on the enhancement of bioelectrocatalytic processes of the biocatalytic systems by the photovoltaic effect was investigated.
Resumo:
A facile magnetic control system was designed in bioelectrocatalytic process based on functionalized iron oxide particles. The iron oxide particles were modified with glucose oxidase, and ferrocene dicarboxylic acid was used as electron transfer mediator. Functionalized iron oxide particles can assemble along the direction of applied magnetic field, and the directional dependence of the assembled iron oxide particles can be utilized for device purposes. We report here how such functionalized magnetic particles are used to modulate the bioelectrocatalytic signal by changing the orientation of the applied magnetic field. (C) 2008 Elsevier B.V. All rights reserved.
Resumo:
By using the bifunctional ligand, 8-hydroxyquinoline-functionalized organosilane (Q-Si), the new mesoporous material Q-MCM-41 covalently bonded with 8-hydroxyquinoline was synthesized. Through the ligand exchange reaction, the new near-infrared (NIR) luminescent mesoporous LnQ(3)-MCM-41 (Ln = Er, Nd, Yb) materials were prepared by linking the lanthanide quinolinate complexes to the ordered mesoporous Q-MCM-41 material. The LnQ(3)-MCM-41 materials were characterized by powder X-ray diffraction and N-2 adsorption/desorption, and they all show the characteristic mesoporous structure of MCM-41 with highly uniform pore size distributions.