The impact of water concentration on the catalytic oxidation of ethanol on platinum electrode in concentrated phosphoric acid

The electro-oxidation of ethanol on platinum in phosphoric acid opens the door to promote the oxidation reaction at higher temperatures. However, the effect of the presence of water is not well understood. In this work, the electro-oxidation of ethanol on platinum was studied in concentrated phosphoric acid containing different concentrations of water at room temperature. The results show that effect of bulk water on the rate electro-oxidation is highest at 0.60 V and decreases for increasing potentials. This was suggested as due to the increasing formation of oxygenated species on the electrode surface with potential, which in turn is more efficient than the increase of water content in the electrolyte. Altogether, these results were interpreted as an evidence of a Langmuir-Hinshelwood step involving oxygenated species as one of the adsorbed partners. (C) 2009 Elsevier B.V. All rights reserved.

Ethanol oxidation reaction on PtCeO(2)/C electrocatalysts prepared by the polymeric precursor method

This paper presents a study of the electrocatalysis of ethanol oxidation reactions in an acidic medium on Pt-CeO(2)/C (20 wt.% of Pt-CeO(2) on carbon XC-72R), prepared in different mass ratios by the polymeric precursor method. The mass ratios between Pt and CeO(2) (3:1, 2:1, 1:1, 1:2, 1:3) were confirmed by Energy Dispersive X-ray Analysis (EDAX). X-ray diffraction (XRD) structural characterization data shows that the Pt-CeO(2)/C catalysts are composed of nanosized polycrystalline non-alloyed deposits, from which reflections corresponding to the fcc (Pt) and fluorite (CeO(2)) structures were clearly observed. The mean crystallite sizes calculated from XRD data revealed that, independent of the mass ratio, a value close to 3 nm was obtained for the CeO(2) particles. For Pt, the mean crystallite sizes were dependent on the ratio of this metal in the catalysts. Low platinum ratios resulted in small crystallites. and high Pt proportions resulted in larger crystallites. The size distributions of the catalysts particles, determined by XRD, were confirmed by Transmission Electron Microscope (TEM) imaging. Cyclic voltammetry and chronoamperometic experiments were used to evaluate the electrocatalytic performance of the different materials. In all cases, except Pt-CeO(2)/C 1:1, the Pt-Ceo(2)/C catalysts exhibited improved performance when compared with Pt/C. The best result was obtained for the Pt-CeO(2)/C 1:3 catalyst, which gave better results than the Pt-Ru/C (Etek) catalyst. (C) 2009 Elsevier B.V. All rights reserved.

Carbon dioxide reforming of ethanol over Ni/Y(2)O(3)-ZrO(2) catalysts

Supported nickel catalysts of composition Ni/Y(2)O(3)-ZrO(2) were synthesized in one step by the polymerization method and compared with a nickel catalyst prepared by wet impregnation. Stronger interactions were observed in the formed catalysts between NiO species and the oxygen vacancies of the Y(2)O(3)-ZrO(2) in the catalysts made by polymerization, and these were attributed to less agglomeration of the NiO during the synthesis of the catalysts in one step. The dry reforming of ethanol was catalyzed with a maximum CO(2) conversion of 61% on the 5NiYZ catalyst at 800 degrees C, representing a better response than for the catalyst of the same composition prepared by wet impregnation. (C) 2009 Published by Elsevier B.V.

Methanol and ethanol electro-oxidation on Pt-SnO(2) and Pt-Ta(2)O(5) sol-gel-modified boron-doped diamond surfaces

The search for more efficient anode catalyst than platinum to be used in direct alcohol fuel cell systems is an important challenge. In this study, boron-doped diamond film surfaces were modified with Pt, Pt-SnO(2) and Pt-Ta(2)O(5) nano-crystalline deposits by the sol-gel method to study the methanol and ethanol electro-oxidation reactions in acidic medium. Electrochemical experiments carried out in steady-state conditions demonstrate that the addition of SnO(2) to Pt produces a very reactive electrocatalyst that possibly adsorbs and/or dissociate ethanol more efficiently than pure Pt changing the onset potential of the reaction by 190 mV toward less positive potentials. Furthermore, the addition of Ta(2)O(5) to Pt enhances the catalytic activity toward the methanol oxidation resulting in a negative shift of the onset potential of 170 mV. These synergic effects indicate that the addition of these co-catalysts inhibits the poisoning effect caused by strongly adsorbed intermediary species. Since the SnO(2) catalyst was more efficient for ethanol oxidation, it could probably facilitate the cleavage of the C-C bond of the adsorbed intermediate fragments of the reaction. (C) 2009 Elsevier B.V. All rights reserved.

Transparent Fault Tolerance for Web Services based Architectures

Service-based architectures enable the development of new classes of Grid and distributed applications. One of the main capabilities provided by such systems is the dynamic and flexible integration of services, according to which services are allowed to be a part of more than one distributed system and simultaneously serve different applications. This increased flexibility in system composition makes it difficult to address classical distributed system issues such as fault-tolerance. While it is relatively easy to make an individual service fault-tolerant, improving fault-tolerance of services collaborating in multiple application scenarios is a challenging task. In this paper, we look at the issue of developing fault-tolerant service-based distributed systems, and propose an infrastructure to implement fault tolerance capabilities transparent to services.

Fuel ethanol price drivers in the Atlantic basin : Brazil & the U.S. traders perspectives

Como a oportunidade de exportação de etanol combustível é muito recente, o agronegócio carece de literatura para formação de gestores e estrategistas. Este trabalho tem como objetivo descrever o mecanismo de formação de preços de etanol tanto no Brasil como nos Estados Unidos da America. Decupei as variáveis que impactam na formação de preços, custo de produção de etanol de cana-de-açúcar, custo da logística e desidratação no Caribe, custo do etanol de milho e fiz algumas análises de cenários de formação de preços das principais variáveis e consegui organizar este conhecimento em um gráfico que contém no eixo superior preço do etanol hidratado na usina no Brasil e no eixo inferior o preço do bushel de milho em Chicago cujas interceções nas retas da taxa do dólar e do preço do gás natural, fornecem no eixo Y o preço do produto no porto de Nova York, ficando uma visualização simples das possibilidades da janela de exportação. A metodologia permite assumir diferentes cenários de oferta, demanda e preços e estabelecer diferentes estratégias de comercialização.

Brazil and the USA: rethinking the future of ethanol for stronger mutual wns

A produção de etanol e a dominação da indústria, historicamente, tem sido uma fonte de discórdia para seus dois principais produtores. Os EUA com seu etanol de milho e o Brasil com sua etanol de cana, são os dois maiores produtores mundiais de etanol (1º EUA; 2º Brasil) e tem competido pela participação de mercado mundial há décadas. A partir de Dezembro de 2011, os EUA levantaram as tarifas e os subsídios que foram instalados para proteger sua indústria de etanol, o que muda o campo de jogo da produção mundial de etanol para o futuro. Atualmente em todo o mundo, o etanol é usado em uma proporção muito menor comparativamente a outros combustíveis. Esta pesquisa analisa o nível potencial de colaboração entre os EUA e o Brasil, facilitando um diálogo entre os stakeholders em etanol. A pesquisa consiste principalmente de conversas e entrevistas, com base em um conjunto de perguntas destinadas a inspirar conversas detalhadas e expansivas sobre os temas de relações Brasil-EUA e etanol. Esta pesquisa mostra que o etanol celulósico, que é também conhecido como etanol de segunda geração, oferece mais oportunidades de parceria entre os EUA e o Brasil, como há mais oportunidades para pesquisa e desenvolvimento em conjunto e transferência de tecnologia nesta área. Enquanto o etanol de cana no Brasil ainda é uma indústria próspera e crescente, o milho e a cana são muito diferentes geneticamente para aplicar as mesmas inovações exatas de um etanol de primeira geração, por outro. As semelhanças entre os processos de fermentação e destilação entre as matérias-primas utilizadas nos EUA e no Brasil para o etanol de segunda geração torna o investimento conjunto nesta área mais sensível. De segunda geração é uma resposta para a questão "alimentos versus combustíveis". Esta pesquisa aplica o modelo de co-opetição como um quadro de parceria entre os EUA e o Brasil em etanol celulósico. A pesquisa mostra que enquanto o etanol pode não ser um forte concorrente com o petróleo no futuro imediato, ele tem melhores perspectivas de ser desenvolvido como um complemento ao petróleo, em vez de um substituto. Como os EUA e o Brasil tem culturas de misturar etanol com petróleo, algo da estrutura para isso já está em vigor, a relação de complementaridade seria fortalecido através de uma política de governo clara e de longo prazo. A pesquisa sugere que apenas através desta colaboração, com toda a partilha de conhecimentos técnicos e estratégias econômicas e de desenvolvimento, o etanol celulósico será um commodity negociado mundialmente e uma alternativa viável a outros combustíveis. As entrevistas com os interessados em que esta pesquisa se baseia foram feitas ao longo de 2012. Como a indústria de etanol é muito dinâmica, certos eventos podem ter ocorrido desde esse tempo para modificar ou melhorar alguns dos argumentos apresentados.

How to indirectly assess transaction costs to evaluate market integration: evidence from the international ethanol market

Mercados são instituições criadas para facilitar uma atividade de comercialização. Isto é possível porque um mercado é constituído por instituições que foram desenhadas para reduzir os custos de transação associados a este processo de troca. A partir dessas duas ideias, esta tese possui três objetivos principais. (i) Analisar por que a literatura de análise de cointegração tem mensurado estes custos de forma imprecisa. A principal razão é certa confusão entre os conceitos de custos de transação, de transporte e de comercialização. (ii) Propor um procedimento para mensurar indiretamente os custos de transação de mercado variáveis combinando os modelos de cointegração com mudança de regime e a estrutura teórica oferecidas pela Nova Economia Institucional. Este procedimento é aplicado para quantificar quanto custa comercializar etanol no mercado internacional usando suas atuais instituições. (iii) Por fim, usando os mesmos modelos e a mesma estrutura teórica, esta dissertação contesta a hipótese de que já existe um mercado internacional de etanol bem desenvolvido, tal qual a literatura tem assumido. De forma semelhante, também é avaliada a hipótese de que a remoção das barreiras comerciais norte-americanas para o etanol brasileiro seria uma condição suficiente para o desenvolvimento deste mercado internacional. Os testes aplicados rejeitam ambas as hipóteses.

Business process in supply chain integration in sugar and ethanol industry

This article presents the application of a diagnosis method in a Brazilian company from the sugar and ethanol industry to identify the level of supply chain integration. The diagnosis method is based on Cooper, Lambert and Pagh reference model for SCM. The method involves nine referential axes established from the eighth key business processes of the reference model.

Corn (Zea mays L.) cultivars tolerance to nicosulfuron

The effects of nicosulfuron on morphological, yield and growth characteristics and the histological modifications in the leaf blade were evaluated for eight corn cultivars: landrace popcorn, ESALQ-popcorn, Piranao, DSCC-Architecture, ESALQ VF7, ESALQ VD8, JAB 01F and JAB 02D. The experimental de sign was a randomized complete block with three replications in a factorial arrangement. Plots were four rows wide and 6.00m long with 0.90m spacing between rows and 0.20m between plants. Nicosulfuron was applied at the dose of 160 g a.i.ha(-1), when the plants was 25 cm high and has 5-6 expanded leaves. Nicosulfuron significantly reduced plant height at silking and the Final plant stand. There was also a significant reduction for plant height at 47 clays after sowing, for number of leaves, ear position. ear height, grain yield, ear weight and total number of ears due to nicosulfuron. The cultivars JAB 01 and JAB 02 were the least affected by the herbicide with similar yields to those of the control group, showing good tolerance to nicosulfuron. The leaves injury symptoms for all the studied cultivars consisted of chlorosis and puckering of the blades from the expanding central leaves of the plant at 7 days after application. Anatomical alterations in the epidermis due to the herbicide consisted of an increase in number and size of the bulliform cells and in the suppression of the epidermal cells in the epidermis and in the nearby of the vascular bundles. Some parenchymatic cells became voluminous and devoid of chloroplasts. SEM examination revealed a loss of bilateral symmetry of the stomata and disappearance of the subsidiary cells from the stomata near the midrib at the adaxial surface.

Aluminum tolerance on genotypes of signal grass

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The Role of Phytochrome in Stress Tolerance

It is well-documented that phytochromes can control plant growth and development from germination to flowering. Additionally, these photoreceptors have been shown to modulate both biotic and abiotic stress. This has led to a series of studies exploring the molecular and biochemical basis by which phytochromes modulate stresses, such as salinity, drought, high light or herbivory. Evidence for a role of phytrochromes in plant stress tolerance is explored and reviewed.

The intravenous glucose tolerance and postprandial glucose tests may present different responses in the evaluation of obese dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Activation and early parthenogenesis of bovine oocytes treated with ethanol and strontium

Efficient artificial activation is indispensable for the success of cloning programs. Strontium has been shown to effectively activate mouse oocytes for nuclear transfer procedures, however, there is limited information on its use for bovine oocytes. The present study had as objectives: (1) to assess the ability of strontium to induce activation and parthenogenetic development in bovine oocytes of different maturational ages in comparison with ethanol; and (2) to verify whether the combination of both treatments improves activation and parthenogenetic development rates. Bovine oocytes were in vitro matured for 24, 26, 28, and 30 h, and treated with ethanol (E, 7% for 5 min) or strontium chloride (S, 10 mM SrCl2 for 5 h) alone or in combination: ethanol + strontium (ES) and strontium + ethanol (SE). Activated oocytes were cultured in vitro in synthetic oviductal fluid (SOF) medium and assessed for pronuclear formation (15-16 h), cleavage (46-48 h) and development to the blastocyst stage (M). Treatment with ethanol and strontium promoted similar results regarding pronuclear formation (E, 20-66.7%; S, 26.7-53.3%; P > 0.05) and cleavage (E, 12.8-40.6%; S, 16.1-41.9%; P > 0.05), regardless of oocyte age. The actions of both strontium and ethanol were influenced by oocyte age: ethanol induced greater activation rates after 28 and 30 h of maturation (48.4 and 66.7% versus 20.0 and 23.3% for 24 and 26 It, respectively; P < 0.05) and strontium after 30 It (53.3%) was superior to 24 and 26h (26.7% for both). Blastocyst development rates were minimal in all treatments (0.0-6.3%; P > 0.05), however, when the mean (+/-S.D.) cell number in blastocysts at the same maturational period was compared, strontium treatment was superior to ethanol for activation rates (82 +/- 5.7 and 89.5 +/- 7.8 versus 54 and 61, at 28 and 30 h, respectively). Improved results were obtained by combined treatments. The combination of ethanol and strontium resulted in similar pronuclear formation (ES, 36.7-83.9%; SE, 53.1-90.3%) and cleavage rates (ES, 31.3-81.3%; SE, 65.6-80.7%). Regarding embryo development, there was no difference (P > 0.05) between treatments, and blastocysts were only obtained in treatment SE at 24 and 26 h (6.5% for both). It is concluded that, SrCl2 induces activation and parthenogenetic development in bovine oocytes. (C) 2003 Elsevier B.V. All rights reserved.

Reaction of Bipolaris euphorbiae to environmental factors and its tolerance to solar and ultraviolet radiation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)