Effective thermal conductivity of beans via a steady-state method

Steady-state concentric cylinder equipment was used to determine the effective thermal conductivity of beans (Phaseolus vulgaris). The measuring cell had no heated end guards and its length to diameter ratio was 10.5. Glass beads were employed to assess the accuracy and repeatability of the experimental system under heat transfer conditions. The results agree well with those reported in the literature so that the system can be considered reliable. Corn was used to verify the system's accuracy under heat and mass transfer conditions. Again the results were satisfactory. Moisture migration was observed and measured during the tests with beans, but this behavior does not compromise thermal conductivity values if both thermal and mass transfer steady-states are correctly interpreted. The effective thermal conductivity increases linearly with increasing grain moisture content. Statistical regression leads to good estimates of the fitted parameters.

Infestation of Bemisia tabaci (Genn.) biotype B (Hemiptera: Aleyrodidae) and Caliothrips phaseoli (Hood.) (Thysanoptera: Thripidae) in beans genotypes.

The objective of this work was to evaluated the infestion of the whitefly Bemisia tabaci (Genn.) B biotype and thrips Caliothrips phaseoli (Hood) in fifteen beans genotypes in field condition. The genotypes IAPAR 31, Rosinha G2, Jalo precoce, Perola, IAC Harmonia, Gen 99TGR110, Gen 99TG2868, Gen 99TGR3416, Gen 99TG3450, Gen 99TG823, Gen 99TGR609, IAC Jaragua, Gen 95A10061531, Gen 99TGR3114 e Gen 96A1473153V2 was used. The experiment was conducted from May to July 2006. The statistical design was randomized blocks, totalizing 15 treatments and four replications. Evaluation was realized weekly, totalizing seven samplings. The evaluations were accomplished on a weekly basis by counting B. tabaci biotype B eggs and nymphs and nymphs of C. phaseoli in 10 leaflets per plot. The less oviposition genotypes by B. tabaci biotype B were IAC Harmonia, Perola, Gen TG3114 e Gen 95A10061531, while the most oviposited were IAC Jaragua and Gen 99TG3450. The less presence of nymphs of whitefly were observed on Perola and IAC Harmonia and the most at IAC Jaragua. It was observed a negative and non significant linear correlation between average temperature versus number of silverleaf whitefly and temperature versus number of thrips was verified.

Histamine release induced by glucose (mannose)-specific lectins isolated from Brazilian beans. Comparison with concanavalin A

The histamine releasing properties of glucose (mannose)-specific lectins isolated from Brazilian beans was examined. The Canavalia brasiliensis, Dioclea rostrata, and Dioclea virgata lectins induced histamine release in rat peritoneal mast cells similar to concanavalin A. Less potency and efficacy was observed for Canavalia maritima, Dioclea guianensis, and Dioclea violacea while very low activities were seen for the lectins from Dioclea grandiflora, Canavalia bonariensis, and Cratylia floribunda. The histamine releasing effect was quenched by higher doses of D. virgata lectin similar to what was reported for concanavalin A. This effect was abrogated by increasing the concentration of calcium in the incubating medium. As these above proteins have sites that bind calcium, higher doses of the lectins might withdraw the calcium which is essential for the mast cell secretion.

Characteristics of the histamine release from hamster cheek pouch mast cells stimulated by lectins from Brazilian beans and concanavalin A

We have characterized the histamine releasing effects of lectins extracted from Brazilian beans, in comparison to concanavalin A, in hamster cheek pouch cell suspensions containing mast cells. The lectins from Dioclea virgata, Canavalia brasiliensis, and Dioclea rostrata induce histamine release in a similar manner to concanavalin A, but appear to differ in potency and efficacy. The effects depended on the temperature, pH, and metabolic energy, demonstrating the non-cytotoxic nature of the histamine release. It is suggested that the lectins studied act by the same mechanism as concanavalin A (interacting with sugars in the antibodies bound to the mast cells), since high concentrations of glucose inhibit the histamine release. The lectins at high concentrations quench the histamine release. This suppression is reversed by increasing calcium concentration, suggesting that the lectins bind to the calcium that is essential for the secretion, thereby confirming and extending our previous data using the lectin from Dioclea virgata in rat peritoneal mast cells.

Heat treatment and inactivation of trypsin-chymotrypsin inhibitors and lectins from beans (Phaseolus vulgaris L.)

This work investigates some factors affecting the inactivation of common bean trypsin inhibitor and phytohemagglutin. Trypsin inhibitor activity was totally stable to heat treatment (30 min, 97C) in the total protein extract, albumin or globulin fraction. Heat treatment of the whole beans easily inactivated the inhibitor. Heat resistance of trypsin inhibitor was intermediate in the bean flour which received the same heat treatment. Independent of sample, the inhibitor was very stable to heat treatment at neutral and acidic pH and labile under strong alkaline conditions. Heating for 30 min in boiling water at pH 12 resulted in complete inactivation of the trypsin inhibitor. Autoclaving (121C) soaked whole beans and flour for 5 min inactivated 55% of the trypsin inhibitor activity in the soaked flour and 75% in the whole beans. After autoclaving 20 min, inactivation of trypsin inhibitor was about 65% in the flour and 80% in the whole beans. The phytohemagglutinin (lectin) activity was totally destroyed in the autoclaved beans after 5 min and in the flour after 15 min.

Java applets for a WWW-HTML-based course in power electronics

This paper introduces Java applet programs for a WWW (world wide web)-HTML (hypertext markup language)-based multimedia course in Power Electronics. The applet programs were developed with the purpose of providing an interactive visual simulation and analysis of idealized uncontrolled single-phase, and three-phase rectifiers. In addition, this paper discusses the development and utilization of JAVA applet programs to solve some design-oriented equations for rectifier applications. The major goal of these proposed JAVA applets was to provide more facilities for the students increase their pace in Power Electronics course, emphasizing waveforms analysis, and providing conditions for an on-line comparative analysis among different hands-on laboratory experiences, via a normal Internet TCP/IP connection. Therefore, using the proposed JAVA applets, which were embedded in a WWW-HTML-based course in Power Electronics, was observed an important improvement of the apprenticeship for the content of this course. Therefore, the course structure becomes fluid, allowing a true on-line course over the WWW, motivating students to learn its content, and apply it in some applications-oriented projects, and their home-works.

Educational Java applets get in power electronics labs

This paper presents Java applet programs for a WWW (world wide web)-HTML (hypertext markup language)-based multimedia course in basic power electronics circuits. These tools make use of the benefits of Java language to provide a dynamic and interactive approach to simulate steady-state idealized rectifiers (uncontrolled and controlled; single-phase and three-phase). In addition, this paper discusses the development and the use of the Java applet programs to assist the teaching of basics rectifier power electronics circuits, and to serve as a first design tool for basics power electronics circuits in the experiments of the laboratories. In order to validate the developed simulation applets, the results were confronted with results obtained from a well-know simulator package PSPICE. © 2005 IEEE.

Usage of enterprise modeling processes and information systems design to forecast demand

Managing the great complexity of enterprise system, due to entities numbers, decision and process varieties involved to be controlled results in a very hard task because deals with the integration of its operations and its information systems. Moreover, the enterprises find themselves in a constant changing process, reacting in a dynamic and competitive environment where their business processes are constantly altered. The transformation of business processes into models allows to analyze and redefine them. Through computing tools usage it is possible to minimize the cost and risks of an enterprise integration design. This article claims for the necessity of modeling the processes in order to define more precisely the enterprise business requirements and the adequate usage of the modeling methodologies. Following these patterns, the paper concerns the process modeling relative to the domain of demand forecasting as a practical example. The domain of demand forecasting was built based on a theoretical review. The resulting models considered as reference model are transformed into information systems and have the aim to introduce a generic solution and be start point of better practical forecasting. The proposal is to promote the adequacy of the information system to the real needs of an enterprise in order to enable it to obtain and accompany better results, minimizing design errors, time, money and effort. The enterprise processes modeling are obtained with the usage of CIMOSA language and to the support information system it was used the UML language.

The application of distributed virtual machines for enterprise computer management: A two-tier network file system for image provisioning and management

In order to simplify computer management, several system administrators are adopting advanced techniques to manage software configuration of enterprise computer networks, but the tight coupling between hardware and software makes every PC an individual managed entity, lowering the scalability and increasing the costs to manage hundreds or thousands of PCs. Virtualization is an established technology, however its use is been more focused on server consolidation and virtual desktop infrastructure, not for managing distributed computers over a network. This paper discusses the feasibility of the Distributed Virtual Machine Environment, a new approach for enterprise computer management that combines virtualization and distributed system architecture as the basis of the management architecture. © 2008 IEEE.

Enterprise systems modeling: The ERP5 development process

The design and implementation of an ERP system involves capturing the information necessary for implementing the system's structure and behavior that support enterprise management. This process should start on the enterprise modeling level and finish at the coding level, going down through different abstraction layers. For the case of Free/Open Source ERP, the lack of proper modeling methods and tools jeopardizes the advantages of source code availability. Moreover, the distributed, decentralized decision-making, and source-code driven development culture of open source communities, generally doesn't rely on methods for modeling the higher abstraction levels necessary for an ERP solution. The aim of this paper is to present a model driven development process for the open source ERP ERP5. The proposed process covers the different abstraction levels involved, taking into account well established standards and common practices, as well as new approaches, by supplying Enterprise, Requirements, Analysis, Design, and Implementation workflows. Copyright 2008 ACM.

Economic relations of Brazil and the United States and the Enterprise for the Americas Initiative

Includes bibliography

Towards a java bytecodes compiler for nios II soft-core processor

Reconfigurable computing is one of the most recent research topics in computer science. The Altera - Nios II soft-core processor can be included in a large set of reconfigurable architectures, especially because it is designed in software, allowing it to be configured according to the application. The recent growth in applications that demand reconfigurable computing made necessary the building of compilers that translate high level languages source codes into reconfigurable devices instruction sets. In this paper we present a compiler that takes as input the bytecodes generated by a Java front-end compiler and generates a set of instructions that attends to the Nios II processor instruction set rules. Our work shows how we process Java bytecodes to the intermediate code, in the Nios II instructions format, and build the control flow and the control dependence graphs. © 2009 IEEE.

Utilizing cross-domain SOAP Web services using client-side languages in an enterprise mashup platform

Service oriented architectures (SOA) based on Simple Object Access Protocol (SOAP) Web services have attracted the attention of enterprises mainly for business-to-business integration and to create composite applications that execute business processes. An existing problem is the lack of preoccupation with non technical users due to the fact that to create a composite application to fulfill users needs, it is necessary to be in contact with IT staff. To overcome this issue, enterprises can take advantage of web 2.0, 'introducing in the development stage some technologies like mashups and some concepts like user empowerment, collaborative work and collective intelligence. Some results [3] [13] have shown how web 2.0 concepts can help non technical users to produce relative complex business processes. However, traditional enterprise requirements goes beyond typical web 2.0 solutions in several aspects: (1) traditional enterprise systems are based on heterogeneous stack of technologies that are not directly exploitable from a web-based client (where SOAP web services play an important role); (2) web browsers set some cross-domain security constraints making difficult to integrate services from diverse domains. In this paper, a contribution to two web 2.0 research projects [14] [15] partially solves the problems described: provide a way to invoke cross-domain backend services (based on SOAP technologies) directly only using clientside languages, without a need for any adaptation layer. © 2010 ACM.

Productivity and water suppression in different beans (Phaseolus vulgaris L.) phenological stages

Common Bean (Phaseolus vulgaris L.) is widespread in the social and economic scene in Brazil, as well it is Brazilian population main dish, and it also helps small and medium farmers' income. The objective of this study was to compare the productivity performance of common bean Carioca - IAC Alvorada with irrigation suppression in each of the five phenological phases. The experiment was conducted in plots in a greenhouse at College of Agronomical Sciences, São Paulo State University (UNESP), Botucatu - SP. The hypothesis is that if the water supply is suppressed in one of the five development stages of irrigated common beans, the yield reduction would be at least 20%. The treatments consisted of suppression irrigation in one of the five development stages (stage V1 to V3, stage V4 to early flowering, flowering stage, pod formation stage and pod filling stage) compared with the irrigation at all stages and suppression of irrigation at all stages, with seven treatments and four replications. The treatments most affected by water suppression were those which suffered suppression of irrigation during the vegetative phase and flowering stage. Treatments with water suppression in all stages, and suppression during the phases (stage V1 to V3, stage V4 to early flowering, flowering stage, pod formation stage and pod filling stage) showed yield reduction of approximately 95%, 55.1%, 49.5%, 63,1%, 30.2% and 35.6%, respectively, when compared to treatment with irrigation all stages. All treatments considered confirmed the hypothesis.

State-owned enterprise reform in Latin America

Includes bibliography