Calibración geométrica de cámaras no métricas. Estudio de metodologías y modelos matemáticos de distorsión

La Fotogrametría, como ciencia y técnica de obtención de información tridimensional del espacio objeto a partir de imágenes bidimensionales, requiere de medidas de precisión y en ese contexto, la calibración geométrica de cámaras ocupa un lugar importante. El conocimiento de la geometría interna de la cámara es fundamental para lograr mayor precisión en las medidas realizadas. En Fotogrametría Aérea se utilizan cámaras métricas (fabricadas exclusivamente para aplicaciones cartográficas), que incluyen objetivos fotográficos con sistemas de lentes complejos y de alta calidad. Pero en Fotogrametría de Objeto Cercano se está trabajando cada vez con más asiduidad con cámaras no métricas, con ópticas de peor calidad que exigen una calibración geométrica antes o después de cada trabajo. El proceso de calibración encierra tres conceptos fundamentales: modelo de cámara, modelo de distorsión y método de calibración. El modelo de cámara es un modelo matemático que aproxima la transformación proyectiva original a la realidad física de las lentes. Ese modelo matemático incluye una serie de parámetros entre los que se encuentran los correspondientes al modelo de distorsión, que se encarga de corregir los errores sistemáticos de la imagen. Finalmente, el método de calibración propone el método de estimación de los parámetros del modelo matemático y la técnica de optimización a emplear. En esta Tesis se propone la utilización de un patrón de calibración bidimensional que se desplaza en la dirección del eje óptico de la cámara, ofreciendo así tridimensionalidad a la escena fotografiada. El patrón incluye un número elevado de marcas, lo que permite realizar ensayos con distintas configuraciones geométricas. Tomando el modelo de proyección perspectiva (o pinhole) como modelo de cámara, se realizan ensayos con tres modelos de distorsión diferentes, el clásico de distorsión radial y tangencial propuesto por D.C. Brown, una aproximación por polinomios de Legendre y una interpolación bicúbica. De la combinación de diferentes configuraciones geométricas y del modelo de distorsión más adecuado, se llega al establecimiento de una metodología de calibración óptima. Para ayudar a la elección se realiza un estudio de las precisiones obtenidas en los distintos ensayos y un control estereoscópico de un panel test construido al efecto. ABSTRACT Photogrammetry, as science and technique for obtaining three-dimensional information of the space object from two-dimensional images, requires measurements of precision and in that context, the geometric camera calibration occupies an important place. The knowledge of the internal geometry of the camera is fundamental to achieve greater precision in measurements made. Metric cameras (manufactured exclusively for cartographic applications), including photographic lenses with complex lenses and high quality systems are used in Aerial Photogrammetry. But in Close Range Photogrammetry is working increasingly more frequently with non-metric cameras, worst quality optical components which require a geometric calibration before or after each job. The calibration process contains three fundamental concepts: camera model, distortion model and method of calibration. The camera model is a mathematical model that approximates the original projective transformation to the physical reality of the lenses. The mathematical model includes a series of parameters which include the correspondents to the model of distortion, which is in charge of correcting the systematic errors of the image. Finally, the calibration method proposes the method of estimation of the parameters of the mathematical modeling and optimization technique to employ. This Thesis is proposing the use of a pattern of two dimensional calibration that moves in the direction of the optical axis of the camera, thus offering three-dimensionality to the photographed scene. The pattern includes a large number of marks, which allows testing with different geometric configurations. Taking the projection model perspective (or pinhole) as a model of camera, tests are performed with three different models of distortion, the classical of distortion radial and tangential proposed by D.C. Brown, an approximation by Legendre polynomials and bicubic interpolation. From the combination of different geometric configurations and the most suitable distortion model, brings the establishment of a methodology for optimal calibration. To help the election, a study of the information obtained in the various tests and a purpose built test panel stereoscopic control is performed.

El perfil de los consumidores de productos de comercio justo. Análisis de las variables que influyen en su intención de compra

El consumo mundial, impulsor del desarrollo y crecimiento económico de los pueblos, no ha sido igual para todas las naciones, ya que sus efectos han sido diferentes para los ciudadanos de los países del Norte y los del Sur, principalmente por dos razones: una, porque han originado complejos y diferentes estilos de vida y aspiraciones, lo que ha originado grandes diferencias entre los individuos de unos y otros países, y, dos, por su falta de valores sociales y éticos. Ante esta situación, la sociedad en su conjunto debe tomar conciencia de este hecho, y a través de un consumo responsable y de un mayor conocimiento de las relaciones comerciales entre los pueblos, debe optar por consumir productos elaborados bajo criterios de justicia y equidad. Para ayudar a alcanzar estos objetivos de equidad, solidaridad, justicia y ética, nació el Comercio Justo, que, en el caso de España, llegó con veinte años de retraso en la década de los ochenta. Aunque a día de hoy sus ventas crecen a un buen ritmo, siguen siendo inferiores al resto de los países europeos, por cuatro razones: (1) el desconocimiento que la mayoría de los potenciales consumidores tienen de este movimiento social; (2) la dificultad de acceder a los productos que comercializan; (3) el poco impulso que se ofrece desde las Administraciones Públicas; y, (4) porque hay pocas investigaciones en las que se haya analizado el Comercio Justo desde la perspectiva de la demanda, lo que ha implicado que no haya un conocimiento profundo sobre los consumidores de este tipo de productos y sobre sus motivaciones de compra. En base a todo lo expuesto, el presente trabajo se concibe como un estudio exploratorio, que tiene como objetivo principal analizar el perfil de los consumidores y no consumidores de productos de Comercio Justo, sus motivaciones de compra y no compra, así como las variables que influyen en la intención de compra futura, tanto en el segmento de consumidores actuales, como en el segmento de no consumidores de este tipo de productos. Para la realización de este trabajo, se ha utilizado, por una parte, una metodología cualitativa, que ha permitido acceder a la información sobre las opiniones y actitudes que intervienen en los procesos de decisión de compra; y, por otra, una metodología cuantitativa, a través de una encuesta online dirigida a 6.500 individuos, que ha permitido tener información, a través de sendos análisis descriptivos univariante y bivariante, de los individuos encuestados sobre el objeto del estudio. Para validar los modelos y contrastar las hipótesis planteadas, se ha utilizado el análisis de fiabilidad y validación de las escalas de medición seleccionadas (Alpha de Cronbach); el análisis factorial exploratorio, para comprobar la dimensionalidad y validez convergente de las escalas de medida; el análisis factorial confirmatorio, para validar la idoneidad de los modelos de medida propuestos; la regresión logística, para comprobar la validez del modelo general de la probabilidad de la compra o no compra de productos de Comercio Justo; y la regresión lineal múltiple, para comprobar la validez de los modelos específicos de intención de compra futura en los segmentos de compradores y de no compradores. Para realizar todos estos análisis, se han utilizado las herramientas informáticas SPSS v21 y AMOS. Las principales conclusiones del trabajo son: (1) que se deben establecer unos criterios claros que definan quién es quién en el movimiento de Comercio Justo, sus fines, sus objetivos, los productos que comercializan, así como su funcionamiento y desarrollo en España; (2) que, a pesar de las grandes ventajas y posibilidades del Comercio Justo, hay una falta de demanda de estos productos por parte de los consumidores responsables, debido principalmente a la falta de información-comunicación sobre el propio movimiento, y, muy especialmente, a la falta de información sobre los productos, los canales de comercialización, las políticas de precios, las políticas de comunicación, etc., y a la necesidad de que estos productos estén accesibles en los lugares donde los consumidores hacen su compra habitual; y (3) que el Comercio Justo español debe afrontar una serie de desafíos, como son la coordinación entre las diferentes organizaciones que participan en su desarrollo; la sensibilización de los consumidores; la creación de una imagen de marca que defina de una manera clara y sencilla qué es el Comercio Justo; la orientación al cliente y no al producto; y extender la red de comercialización de productos de Comercio Justo a los canales donde los consumidores hacen su compra habitualmente. ABSTRACT Global consumption, the driver of economic growth and development of nations, is not the same for all countries, since its effects have been different on people coming from the North or the South. This is due mainly to two reasons: firstly, because they have developed complex and different lifestyles and aspirations, which have led to significant differences between individuals of one country and another and secondly, because they lack social and ethical values. Given this situation, society as a whole should be aware of this fact, and through responsible consumption and a greater knowledge of trade relations between countries, should opt for consuming products produced with criteria of justice and equity. Fair Trade began as a way to help reach these goals of equity, solidarity, justice and ethics. In the case of Spain it did not start until 20 years later, in the eighties. Although today sales of Fair Trade products are growing at a good rate, they are still below that of other European countries, for four reasons: (1) unawareness of this social movement; (2) the difficult access to these products; (3) insufficient government support; (4) the limited research carried out to analyse Fair Trade from the perspective of demand, resulting in a lack of knowledge about this type of consumer and their purchasing motivations. Based on the above, the present study is designed as an exploratory investigation, aimed at analyzing the profile of consumers and non-consumers of Fair Trade, their motivations for buying and not buying, as well as the variables which influence future purchase intention in both the current consumer segment, and the non-user segment of such products. To carry out this study we have used, on the one hand, a qualitative methodology, to obtain information about the views and attitudes involved in the purchase decision process; and on the other, a quantitative methodology, through an online survey of 6,500 individuals, which provided information through two separate univariate and bivariate descriptive analysis, of the individuals interviewed about the object of this study. To validate the models and contrast hypotheses, we have used the reliability analysis and validation of the selected measurement scales (Cronbach's Alpha); exploratory factor analysis to verify the dimensionality and convergent validity of the measurement scales; confirmatory factor analysis to validate the adequacy of the models of measurement proposed; logistic regression, to verify the validity of the general model of the probability of buying or not buying Fair Trade products; and multiple linear regression to test the validity of specific models in future purchase intention in the segments of buyers and non-buyers. To carry out these analyses, we used SPSS v21 software tools and AMOS. The principal conclusions of the investigation are: (1) the need to establish clear criteria which define who is who in the Fair Trade movement, its goals, objectives, the products they sell, as well as its operation and development in Spain; (2) that despite the great advantages and possibilities of Fair Trade, there is a lack of demand for these products by responsible consumers, mainly due to the lack of information-communication about the movement itself, and especially on the range of products, sales channels, pricing policies, communication policies, etc., and the need for these products to be available in places where consumers make their usual purchase; and (3) that Spanish Fair Trade must address a number of challenges such as: coordination between the different organizations involved in trade development; consumer awareness; creation of a brand image that defines in a clear and simple way what Fair Trade is; focus on the customer rather than the product; and expansion of the network of Fair Trade sales outlets to include the channels where consumers usually make their purchases.

Barreras para la práctica de actividad física y deportiva en las personas adultas de la Comunidad de Madrid. Desarrollo y validación de un instrumento

El propósito de este estudio fue la construcción y validación de un instrumento de medición de barreras a la práctica de la actividad física y deportiva por parte de las personas adultas desde la teoría ecológico social y analizar la presencia de las diferentes barreras así como las innovaciones y alternativas de conciliación a las barreras relacionadas con el empleo, el cuidado de hijos e hijas y las tareas del hogar, identificando las posibles diferencias existentes en función del género y del tipo de demanda en la población adulta de la Comunidad de Madrid. Se ha realizado un estudio cuantitativo, descriptivo y transversal en una muestra representativa de la población residente en la Comunidad de Madrid entre 30 y 64 años. El tipo de muestreo fue probabilístico, de tipo polietápico según tamaño demográfico de municipio y género, con un margen de error del ± 5,27% y un intervalo de confianza del 95,5%. El tamaño de la muestra final fue de 360 personas (50,3% mujeres, 49,7% hombres), quienes completaron un cuestionario estructurado mediante entrevista personal cara a cara en su domicilio entre octubre y diciembre de 2011, que incluía una escala de barreras específica, así como sub-cuestionarios de innovaciones y alternativas de conciliación vinculados a los tres ítems relacionados con el empleo, cuidado de hijos e hijas y hogar de la escala de barreras. La escala de barreras fue completada por las personas practicantes de actividad física y deportiva que deseaban realizar otra actividad, es decir, por la Demanda Establecida, así como por las personas no practicantes pero deseosas de hacerlo o Demanda Latente, y las personas no practicantes no interesadas en practicar o Demanda Ausente (n=246). Las personas que alcanzaron elevadas puntuaciones en los tres ítems de la escala de barreras vinculados al empleo, cuidado de hijos e hijas y hogar, completaron sub-cuestionarios específicos de innovaciones y alternativas de conciliación vinculados a estas barreras. Para el estudio métrico de los ítems y la dimesionalidad de la escala de barreras se llevaron a cabo análisis descriptivos de los ítems, análisis correlacionales y análisis factoriales exploratorios (AFE). Como resultado se obtuvo una escala de barreras constituida por 13 ítems que explicaron el 59,1% de la variabilidad total de los datos, agrupados en cuatro dimensiones denominadas: Barreras Interpersonales (2 ítems), Barreras Individuales (4 ítems), Barreras Comunidad-Institucionales (4 ítems) y Barreras Obligaciones-Tiempo (3 ítems). Los datos de la escala de barreras y los sub-cuestionarios de innovaciones y alternativas de conciliación fueron analizados con el SPSS v. 18. Para la comparación de variables cuantitativas y ordinales se utilizaron ANOVAS de dos factores (género por tipo de demanda), el tamaño del efecto para esta prueba se cuantificó mediante eta cuadrado. Los resultados se expresaron como porcentajes para las variables nominales y como medias y desviaciones típicas para las variables ordinales y cuantitativas. El nivel de riesgo se fijó en 0,05. El instrumento presentó una fiabilidad aceptable (α=0,58) en consonancia con el modelo ecológico social presentando dimensiones que explicaron los niveles de influencia de las diferentes esferas. Los resultados obtenidos permitieron avalar tanto la adecuación de las propiedades psicométricas de los ítems, así como la validez y fiabilidad de la escala de barreras para la práctica de actividad física y deportiva. Los distintos análisis realizados han aportado evidencia de la validez de una estructura de cuatro dimensiones acorde a los planteamientos teóricos previos de los modelos ecológicos sociales. En la dimensión barreras Individuales se identificaron diferencias según el tipo de demanda (F2,237=40,28; p<0,001; η2=0,25) y el género (F1,237=8,72; p<0,01; η2=0,84). En la dimensión barreras Interpersonales se identificaron diferencias de género (F1,239 =14,9; p<0,01; η2=0,06) pero no entre demandas (F2,239=2,35; p>0,05; 1-β=0,47). En la dimensión Barreras Obligaciones-Tiempo se identificaron diferencias en función del tipo de demanda (F2,239=3,88; p<0,05; η2=0,03) sin presentar diferencias entre hombres y mujeres (F1,239=1,06; p>0,05; 1-β=0,18). Por último, en la dimensión Comunidad Institucionales, se identificaron diferencias en función del tipo de demanda (F2,240=5,69; p<0,01; η2=0,045) y no hubo diferencias en función del género (F1,240=0,65; p>0,05; 1-β=0,13). Las innovaciones y alternativas de conciliación relacionadas con el empleo más valoradas fueron la de flexibilidad en los horarios de trabajo y adecuación de horarios; las más valoradas relacionadas con la barrera cuidado de hijos fueron que en la instalación deportiva se ofertaran actividades físicas conjuntas, en las en las que pudiesen participar madres e hijos y que la instalación deportiva ofreciera, en el mismo horario, actividades para ellos y sus hijos, y, por último, las más valoradas en relación con las tareas del hogar, una mayor implicación de la pareja seguida por una mayor implicación de los hijos. ABSTRACT The objectives of this study were to build and validate an instrument to measure the barriers of adult people to the practice of sport and physical activities from the perspective of the social-ecological theory, analyse the presence of the different barriers, as well as the innovations and alternatives regarding conciliation with work and the care of children and home as barriers, identifying the possible differences that exist based on gender and the type of demand of the adult population within the Community of Madrid. For this, a quantitative, descriptive and transversal study was carried out on a representative sample of the resident population of the Community of Madrid, ages ranging from 30 to 64 years old. Given that is an infinite or very large population, and working with an interval of confidence of the 95,5%, and assuming in the population variance, the worst case of p equal to q, the margin of sampling error was ± 5,27. The sample consisted of 360 people (50,3% women, 49,7% men), who completed a questionnaire during face-to-face personal interviews between October and December 2011. The questionnaire included a scale of specific barriers, as well as sub-questionnaires on the innovations and alternatives linked to the three items regarding work, the care of children and home of the barriers scale. The barriers scale was completed by people who practice physical and sport activities and wanted to do other activities, i.e. by the Established Demand; by people who do not practice these activities but would like to do so, i.e. Latent Demand; and by people who do not practice these activities and have no desire to do so, i.e. Absent Demand (n=246). The people who peaked on the three items of the barriers scale regarding work, the care of children and home, then completed specific sub-questionnaires on the innovations and alternatives for conciliation related to these barriers. The metric study of the items and the dimensionality of the barriers scale was carried out through descriptive analyses of the items, as well as correlation analyses and exploratory factor analyses (EFA). This resulted in a barriers scale composed of 13 items that explained 59,1% of the total variability of the data, grouped in four dimensions as follows: Interpersonal Barriers (2 items), Individual Barriers (4 items), Community-Institutional Barriers (4 items) and Obligations-Time Barriers (3 items). The data obtained from the barriers scale and sub-questionnaires on the innovations and alternatives for conciliation were analyzed using software SPSS v. 18. Two-way ANOVA (gender by type of demand) was used for the comparison of quantitative and ordinal variables, and the effect size for this test was quantified with eta squared. The results were expressed as percentages for nominal variables, and as means and standard deviations for quantitative and ordinal variables. The level of risk was set at 0,05. The instrument showed an acceptable reliability (α=0,58) in line with the social-ecological model, providing dimensions that explained the influence levels of the different spheres. The results obtained establish both the adaptation of the psychometric properties of the items, and the validity and reliability of the barriers scale for the practice of physical and sport activities. The different analyses have supported the validity of a four-dimensional structure consistent with the previous theoretical approaches on the social-ecological models, while showing adequate statistical indices. The differences identified in the Individual Barriers dimension were based on the type of demand (F2,237=40,28; p<0,001; η2=0,25) and gender (F1,237=8,72; p<0,01; η2=0,84). The differences identified in the Interpersonal Barriers dimension were based on gender (F1,239 =14,9; p<0,01; η2=0,06) but not on demand (F2,239=2,35; p>0,05; 1-β=0,47). The differences identified for the Obligations-Time Barriers dimension were based on the type of demand (F2,239=3,88; p<0,05; η2=0,03) and did not show differences between men and women (F1,239=1,06; p>0,05; 1-β=0,18). Finally, the differences identified for the Community-Institutional Barriers dimension were based on the type of demand (F2,240=5,69; p<0,01; η2=0,045) and provided no differences based on gender (F1,240=0,65; p>,05; 1-β=0,13). The most valued innovations and alternatives for conciliation regarding work were the adaptation and flexibility of working hours and timetables; the most valued related to the care of children were the offer of joint activities for adults and children in sport centres, as well as separate activities within the same timetable; and, finally, the most valued regarding the home was a higher degree of participation and involvement on the part of the spouse or partner, followed by a higher degree of participation and involvement on the part of the children.

Estratos arquitectónicos : conceptos, lógicas, sinopsis

La presente tesis doctoral se centra en la investigación del "estrato arquitectónico", manejando conceptos, lógicas y sinopsis como puntos organizativos, enlazados y superpuestos, que den paso a un marco propositivo que pueda ser simultáneamente articulado e independiente. Una situación que, ante nuevos desafíos, pretende ir más allá de una estricta definición de estrato o de su noción preconcebida descrita desde la superposición de diversos materiales. Todo ello a fin de revelar los diferentes perfiles del estrato y de la estratificación. Para ello, se abre y amplía el campo de estudio proyectual/procesual desdibujando los límites entre disciplinas –geología, filosofía, tecnología, arquitectura–. Y al mismo tiempo, se construye una cartografía del estrato arquitectónico asociada: a una taxonomía descriptora, a nuevas formulaciones, a pensamientos de personajes reconocibles y/o rescatados –como Rowe/Slutzky, Smithson, Parent/Virilio, Koolhaas, MVRDV, etc.–, y, por último, a nuevas lógicas proyectuales y operativas referidas al estrato, que fusionan conocimientos complejos. Unos contenidos que habitualmente no se presentan en investigaciones doctorales tradicionales –lo que permite afrontar nuevos cambios metodológicos, e imprimir un punto de partida para el desarrollo de futuras investigaciones o de otros posibles caminos emergentes–. Así, el discurso se impregna de nuevos referentes teóricos dentro de una misma mitología común (la del estrato). Un tema abordado con claves híbridas, es decir, con estudios selectivos y escritos coleccionados –analizados a partir de antecedentes encontrados y consolidados–, combinados con interpretaciones subyacentes en la arquitectura contemporánea –que pueden todavía encontrarse en fase experimental–. Una investigación que muestra la adaptación, la evolución y el cambio de la definición de "estrato arquitectónico", así como de su apariencia, utilización y aplicación a lo largo del tiempo, consecuencia de las nuevas necesidades y/o de las nuevas bases ideológicas ocasionadas por nuevos descubrimientos. Estratos arquitectónicos que dotan al espacio de profundidad –desde la bidimensionalidad– mediante la superposición de planos paralelos hacia la construcción de una nueva experiencia de estratificación fenomenológica. Estratos que generan estímulos y cambian su materialidad –de opacos a (en)tramados– creando apariencias y produciendo diversos efectos, para posteriormente exfoliarse y convertirse en estratos habitables. Estratos capturadores del espacio-tiempo, o de las dinámicas internas. Llegando incluso, con un último giro, a la era digital, donde el estrato informacional –que continua siendo independiente, autónomo y diverso, y que puede ser modificado, manipulado, suprimido o activable sin alterar el conjunto–, propicia obtener sistemas flexibles, relacionales, capaces de mutar o adaptarse, asociados a distintos niveles de organización dispositiva, que impulsan acciones y hacen emerger lógicas proyectuales. Estratos que surgen de forma elaborada o espontánea en el territorio urbano o natural (ciudad sobre ciudad, suelo sobre suelo), que se aplican extendiendo e hibridando el territorio (paisajes operativos), que son replanteados artificialmente como mecanismos edificatorios según las exigencias existentes (estratos programáticos, capas especializadas), y que se implantan como capas/layers en los programas informáticos utilizados como herramientas de diseño (multicapas, sistemas de intercambio informacional). Un trabajo que se estructura de manera multicapa lo que permite recorrer la tesis como un mapa de secuencias, saltar entre estratos de información, o seleccionar lecturas según intereses de pensamiento o acción arquitectónica. En consecuencia, una investigación sobre el "estrato arquitectónico" que conecta diversas disciplinas, que recopila distintos posicionamientos teórico/prácticos –lo que implica la introducción de parámetros y datos vivos–, y afronta un posicionamiento estratégico que vuelve a poner en valor el estrato arquitectónico –partiendo de estrategias formales que se han transformado en estrategias experimentales/operativas (a medida que el entorno se ha ido complejizando), siguiendo una estrategia conceptual e intelectual contemporánea, propia y específica–. ABSTRACT This PhD thesis is based on the research of "architectural stratum" using concepts, logical and synopsis as organizational, linked and overlapping points, which give way to a proactive framework that can be articulated and independent simultaneously. A situation that, faced with new challenges, aims to go beyond a strict definition of stratum or their preconceived notion described from the superposition of different materials. All this in order to reveal the different profiles of stratum and stratification. To do this, it opens and widens the field of project/process study, blurring the boundaries between disciplines –geology, philosophy, technology, architecture–. And, at the same time, a cartography of the architectural stratum is constructed, that associates with: descriptor taxonomy, new formulations, thoughts of recognizable and/or rescued characters, –as Rowe/Slutzky, Smithson, Parent/Virilio, Koolhaas, MVRDV, etc.–, and finally, a new project and operational logics referred to stratum, which merge complex knowledge. A content not usually presented in traditional doctoral research –which can face new methodological changes, and creates a starting point for future research or other possible emerging paths–. Thus, the work is imbued with new theoretical framework within a common mythology (stratum’s myth). An issue addressed with hybrid keys, that is, with selective studies and collected writings –analyzed starting from found and consolidated backgrounds–, combined with underlying performances on contemporary architecture –which can still be in experimental phase–. A research that shows adaptation, evolution and change of the definition of "architectural stratum", as well as their appearance, use and application throughout time, result of the new requirements and/or the new ideological foundations caused by new discoveries. Architectural strata that give depth to space –from two-dimensionality– by overlapping parallel planes towards the construction of a new experience of phenomenological stratification. Strata that generate stimuli and change their materiality –from opaque to lattice– creating appearances and producing various effects, for later exfoliating and becoming habitable strata. Strata that capture space-time or internal dynamics. Even reaching, with a final twist, the digital age, where the informational stratum –which remains independent, autonomous and diverse, and can be modified, manipulated, deleted or activated without altering the whole–, contribute to obtaining flexible, relational systems, able to mutate or adapt, associated with different levels of regulatory organization, that drive actions and make emerge project logics. Strata that arise elaborately or spontaneously in urban or natural territory (city upon city, floor upon floor), which apply expanding and hybridizing the territory (operational landscapes), which are artificially restated as building mechanisms according to existing requirements (strata program, specialized layers), which are implemented as layers in the software used as design tools (multilayer, systems of informational interchange). A work that is structured in a multi-layered way, which allows explore the thesis as a sequence map, jump between layers of information, or select readings according to an interest in thought or architectural action. Therefore, an investigation into the "architectural stratum" that connects different disciplines, which collects different theoretical/practical positions –which implies the introduction of live parameters and data– and faces a strategic positioning returning to value the architectural stratum –based on formal strategies that have become experimental/operational strategies (as the environment has become more complex), following a conceptual, intellectual, contemporary, own specific strategy–.

La unidad de lo dual : tradición y modernidad en la obra de Tadao Ando y Toyo Ito

La referencia a la tradición como una fuerza capaz de aportar unidad, al abarcar tanto la continuidad como los cambios en las expresiones al margen de la época o las técnicas empleadas, ha sido siempre un componente muy importante de las manifestaciones artísticas de Japón y es la sutil ligazón que las conecta desde el pasado hasta la actualidad. Se entiende aquí que tradición no equivale simplemente a preservación, sino que se trata de una transmisión con una vertiente dual, pues permite una constante evolución sin que se altere su esencia básica. Es de esta forma que la cultura japonesa de la era Edo (1600-1868), con su alto grado de innovación, riqueza y sofisticación, pero además como epílogo histórico previo a la Restauración Meiji de 1868, ha sido la referencia clave en lo relativo a esa mirada a la tradición nipona para el desarrollo de esta tesis. A partir de la segunda mitad del siglo XIX, todas estas características tan genuinas del período Edo quedaron en suspenso y, desde entonces, Japón ha seguido la vía de la modernización (que en muchos aspectos ha sido también la de la occidentalización). Los entrelazamientos de otras dualidades provocados en Japón por los ataques nucleares de 1945 condujeron a una inevitable fusión de aquel mundo físico con el mundo metafísico, de aquella terrible presencia con un tremendo sentimiento de ausencia y, en definitiva, de Oriente con Occidente. El consiguiente impacto sobre la cultura de la nación tuvo una especial repercusión en el ámbito arquitectónico. En este sentido, el pensamiento francés ha desempeñado un papel fundamental en el replanteamiento radical de muchos supuestos esenciales, de muchos conceptos y valores de la cultura occidental, incluyendo los procedentes de la Ilustración, en este mundo contemporáneo que es cada vez más complejo y plural. Éstos y otros hechos otorgan a la cultura japonesa tradicional una cualidad multidimensional (frente a la marcada bidimensionalidad que suele caracterizar a las culturas occidentales) que, tal y como esta tesis doctoral pretende poner de manifiesto, podría revelarse como una «síntesis de contradicciones» en la obra de los arquitectos japoneses Tadao Ando (Osaka, 1941-) y Toyo Ito (Keijo, actual Seúl, 1941-). En el pensamiento oriental una dualidad es entendida como la complementariedad entre dos polos, sólo en apariencia opuestos, que integra dos vertientes de un único concepto. Al igual que la idea de «parejas» budista, concebida según esta doctrina como una unidad entre dos extremos inevitablemente interrelacionados, el objetivo principal sería el de poner de manifiesto cómo la obra de ambos arquitectos trata de resolver los mismos conflictos partiendo de puntos de vista polarizados. ABSTRACT The reference to tradition as a force for unity, encompassing both continuity and changes in expressions regardless of the time or techniques used, has always been a very important component of the artistic manifestations of Japan and it is the subtle link that connects them from the past to the present. It is understood here that tradition does not mean simply preservation, but it is a transmission with a dual aspect, because it allows a constant evolution without altering its basic essence. It is thus that the Japanese culture of the Edo era (1600-1868), with its high degree of innovation, wealth and sophistication, but also as a historical epilogue prior to the Meiji Restoration of 1868 has been the key reference concerning that look to the Japanese tradition for the development of this thesis. From the second half of the 19th century, all these as genuine features of the Edo period remained at a standstill and, since then, Japan has followed the path of modernization (which has also been that of Westernization in many ways). The interlacements of other dualities caused in Japan by the 1945 nuclear attacks led to an inevitable fusion of the physical with the metaphysical world, of that terrible presence with a tremendous sense of absence and, eventually, of East with West. The resulting impact on the culture of the nation had a special repercussion on the architectural field. In this sense, the French thought has played a key role in the radical rethinking of many core assumptions, many concepts and values of Western thought, including those from the Age of Enlightenment, in this contemporary world that is increasingly complex and plural. These and other facts give the traditional Japanese culture a multidimensional quality (opposed to the marked two-dimensionality that usually characterizes Western cultures). As this thesis aims to highlight, this could prove to be a «synthesis of contradictions» in the work of Japanese architects Tadao Ando (Osaka, 1941-) and Toyo Ito (Keijo, current Seoul, 1941-). In the Eastern thought a duality is understood as the complementarity between two poles, only apparently opposite, which integrates two aspects of a single concept. Like the Buddhist notion of «couples» (conceived according to this doctrine as a unity between two inevitably interlinked extremes) the main objective would be to show how the work of both architects tries to resolve the same conflicts starting with polarized viewpoints.

Temporal fluctuations in coherence of brain waves.

As a measure of dynamical structure, short-term fluctuations of coherence between 0.3 and 100 Hz in the electroencephalogram (EEG) of humans were studied from recordings made by chronic subdural macroelectrodes 5-10 mm apart, on temporal, frontal, and parietal lobes, and from intracranial probes deep in the temporal lobe, including the hippocampus, during sleep, alert, and seizure states. The time series of coherence between adjacent sites calculated every second or less often varies widely in stability over time; sometimes it is stable for half a minute or more. Within 2-min samples, coherence commonly fluctuates by a factor up to 2-3, in all bands, within the time scale of seconds to tens of seconds. The power spectrum of the time series of these fluctuations is broad, extending to 0.02 Hz or slower, and is weighted toward the slower frequencies; little power is faster than 0.5 Hz. Some records show conspicuous swings with a preferred duration of 5-15s, either irregularly or quasirhythmically with a broad peak around 0.1 Hz. Periodicity is not statistically significant in most records. In our sampling, we have not found a consistent difference between lobes of the brain, subdural and depth electrodes, or sleeping and waking states. Seizures generally raise the mean coherence in all frequencies and may reduce the fluctuations by a ceiling effect. The coherence time series of different bands is positively correlated (0.45 overall); significant nonindependence extends for at least two octaves. Coherence fluctuations are quite local; the time series of adjacent electrodes is correlated with that of the nearest neighbor pairs (10 mm) to a coefficient averaging approximately 0.4, falling to approximately 0.2 for neighbors-but-one (20 mm) and to < 0.1 for neighbors-but-two (30 mm). The evidence indicates fine structure in time and space, a dynamic and local determination of this measure of cooperativity. Widely separated frequencies tending to fluctuate together exclude independent oscillators as the general or usual basis of the EEG, although a few rhythms are well known under special conditions. Broad-band events may be the more usual generators. Loci only a few millimeters apart can fluctuate widely in seconds, either in parallel or independently. Scalp EEG coherence cannot be predicted from subdural or deep recordings, or vice versa, and intracortical microelectrodes show still greater coherence fluctuation in space and time. Widely used computations of chaos and dimensionality made upon data from scalp or even subdural or depth electrodes, even when reproducible in successive samples, cannot be considered representative of the brain or the given structure or brain state but only of the scale or view (receptive field) of the electrodes used. Relevant to the evolution of more complex brains, which is an outstanding fact of animal evolution, we believe that measures of cooperativity are likely to be among the dynamic features by which major evolutionary grades of brains differ.

Intermolecular and Intramolecular Charge Transfer in Functional Molecular Materials

This thesis is devoted to the investigation of inter and intramolecular charge transfer (CT) in molecular functional materials and specifically organic dyes and CT crystals. An integrated approach encompassing quantum-chemical calculations, semiempirical tools, theoretical models and spectroscopic measurements is applied to understand structure-property relationships governing the low-energy physics of these materials. Four main topics were addressed: 1) Spectral properties of organic dyes. Charge-transfer dyes are constituted by electron donor (D) and electron acceptor (A) units linked through bridge(s) to form molecules with different symmetry and dimensionality. Their low-energy physics is governed by the charge resonance between D and A groups and is effectively described by a family of parametric Hamiltonians known as essential-state models. These models account for few electronic states, corresponding to the main resonance structures of the relevant dye, leading to a simple picture that is completed introducing the coupling of the electronic system to molecular vibrations, treated in a non-adiabatic way, and an effective classical coordinate, describing polar solvation. In this work a specific essential-state model was proposed and parametrized for the dye Brilliant Green. The central issue in this work has been the definition of the diabatic states, a not trivial task for a multi-branched chromophore. In a second effort, we have used essential-state models for the description of the early-stage dynamics of excited states after ultrafast excitation. Crucial to this work is the fully non-adiabatic treatment of the coupled electronic and vibrational motion, allowing for a reliable description of the dynamics of systems showing a multistable, broken-symmetry excited state. 2) Mixed-stack CT salts. Mixed-stack (MS) CT crystals are an interesting class of multifunctional molecular materials, where D and A molecules arrange themselves to form stacks, leading to delocalized electrons in one dimension. The interplay between the intermolecular CT, electrostatic interactions, lattice phonons and molecular vibrations leads to intriguing physical properties that include (photoinduced) phase transitions, multistability, antiferromagnetism, ferroelectricity and potential multiferroicity. The standard microscopic model to describe this family of materials is the Modified Hubbard model accounting for electron-phonon coupling (Peierls coupling), electron-molecular vibrations coupling (Holstein coupling) and electrostatic interactions. We adopt and validate a method, based on DFT calculations on dimeric DA structures, to extract relevant model parameters. The approach offers a powerful tool to shed light on the complex physics of MS-CT salts. 3) Charge transfer in organic radical dipolar dyes. In collaboration with the group of Prof. Jaume Veciana (ICMAB- Barcellona), we have studied spectral properties of a special class of CT dyes with D-bridge-A structure where the acceptor group is a stable radical (of the perchlorotriphenylmethyl, PTM, family), leading to an open-shell CT dyes. These materials are of interest since they associate the electronic and optical properties of CT dyes with magnetic properties from the unpaired electron. The first effort was devoted to the parametrization of the relevant essential-state model. Two strategies were adopted, one based on the calculation of the low-energy spectral properties, the other based on the variation of ground state properties with an applied electric field. 4) The spectral properties of organic nanoparticles based on radical species are investigated in collaboration with Dr. I. Ratera (ICMAB- Barcellona). Intriguing spectroscopic behavior was observed pointing to the presence of excimer states. In an attempt to rationalize these findings, extensive calculations (TD-DFT and ZINDO) were performed. The results for the isolated dyes are validated against experimental spectra in solution. To address intermolecular interactions we studied dimeric structures in the gas phase, but the preliminary results obtained do not support excimer formation.

Electrical investigation of p-type 4H-SiC heavily doped by ion implantation

In the last decades, an increasing interest in the research field of wide bandgap semiconductors was observed, mostly due to the progressive approaching of silicon-based devices to their theoretical limits. 4H-SiC is an example among these, and is a mature compound for applications. The main advantages offered 4H-SiC in comparison with silicon are an higher breakdown field, an higher thermal conductivity, a higher operating temperature, very high hardness and melting point, biocompatibility, but also low switching losses in high frequencies applications and lower on-resistances in unipolar devices. Then, 4H-SiC power devices offer great performance improvement; moreover, they can work in hostile environments where silicon power devices cannot function. Ion implantation technology is a key process in the fabrication of almost all kinds of SiC devices, owing to the advantage of a spatially selective doping. This work is dedicated to the electrical investigation of several differently-processed 4H-SiC ion- implanted samples, mainly through Hall effect and space charge spectroscopy experiments. It was also developed the automatic control (Labview) of several experiments. In the work, the effectiveness of high temperature post-implant thermal treatments (up to 2000°C) were studied and compared considering: (i) different methods, (ii) different temperatures and (iii) different duration of the annealing process. Preliminary p + /n and Schottky junctions were also investigated as simple test devices. 1) Heavy doping by ion implantation of single off-axis 4H-SiC layers The electrical investigation is one of the most important characterization of ion-implanted samples, which must be submitted to mandatory post-implant thermal treatment in order to both (i) recover the lattice after ion bombardment, and (ii) address the implanted impurities into lattice sites so that they can effectively act as dopants. Electrical investigation can give fundamental information on the efficiency of the electrical impurity activation. To understand the results of the research it should be noted that: (a) To realize good ohmic contacts it is necessary to obtain spatially defined highly doped regions, which must have conductivity as low as possible. (b) It has been shown that the electrical activation efficiency and the electrical conductivity increase with the annealing temperature increasing. (c) To maximize the layer conductivity, temperatures around 1700°C are generally used and implantation density high till to 10 21 cm -3 . In this work, an original approach, different from (c), is explored by the using very high annealing temperature, around 2000°C, on samples of Al + -implant concentration of the order of 10 20 cm -3 . Several Al + -implanted 4H-SiC samples, resulting of p-type conductivity, were investigated, with a nominal density varying in the range of about 1-5∙10 20 cm -3 and subjected to two different high temperature thermal treatments. One annealing method uses a radiofrequency heated furnace till to 1950°C (Conventional Annealing, CA), the other exploits a microwave field, providing a fast heating rate up to 2000°C (Micro-Wave Annealing, MWA). In this contest, mainly ion implanted p-type samples were investigated, both off-axis and on-axis <0001> semi-insulating 4H-SiC. Concerning p-type off-axis samples, a high electrical activation of implanted Al (50-70%) and a compensation ratio below 10% were estimated. In the work, the main sample processing parameters have been varied, as the implant temperature, CA annealing duration, and heating/cooling rates, and the best values assessed. MWA method leads to higher hole density and lower mobility than CA in equivalent ion implanted layers, resulting in lower resistivity, probably related to the 50°C higher annealing temperature. An optimal duration of the CA treatment was estimated in about 12-13 minutes. A RT resistivity on the lowest reported in literature for this kind of samples, has been obtained. 2) Low resistivity data: variable range hopping Notwithstanding the heavy p-type doping levels, the carrier density remained less than the critical one required for a semiconductor to metal transition. However, the high carrier densities obtained was enough to trigger a low temperature impurity band (IB) conduction. In the heaviest doped samples, such a conduction mechanism persists till to RT, without significantly prejudice the mobility values. This feature can have an interesting technological fall, because it guarantee a nearly temperature- independent carrier density, it being not affected by freeze-out effects. The usual transport mechanism occurring in the IB conduction is the nearest neighbor hopping: such a regime is effectively consistent with the resistivity temperature behavior of the lowest doped samples. In the heavier doped samples, however, a trend of the resistivity data compatible with a variable range hopping (VRH) conduction has been pointed out, here highlighted for the first time in p-type 4H-SiC. Even more: in the heaviest doped samples, and in particular, in those annealed by MWA, the temperature dependence of the resistivity data is consistent with a reduced dimensionality (2D) of the VRH conduction. In these samples, TEM investigation pointed out faulted dislocation loops in the basal plane, whose average spacing along the c-axis is comparable with the optimal length of the hops in the VRH transport. This result suggested the assignment of such a peculiar behavior to a kind of spatial confinement into a plane of the carrier hops. 3) Test device the p + -n junction In the last part of the work, the electrical properties of 4H-SiC diodes were also studied. In this case, a heavy Al + ion implantation was realized on n-type epilayers, according to the technological process applied for final devices. Good rectification properties was shown from these preliminary devices in their current-voltage characteristics. Admittance spectroscopy and deep level transient spectroscopy measurements showed the presence of electrically active defects other than the dopants ones, induced in the active region of the diodes by ion implantation. A critical comparison with the literature of these defects was performed. Preliminary to such an investigation, it was assessed the experimental set up for the admittance spectroscopy and current-voltage investigation and the automatic control of these measurements.

Collective effects in light scattering from cold strontium clouds

A cold atomic cloud is a versatile object, because it offers many handles to control and tune its properties. This facilitates studies of its behavior in various circumstances, such as sample temperature, size and density, composition, dimensionality and coherence time. The range of possible experiments is constrained by the specifications of the atomic species used. In this thesis presents the work done in the experiment for laser cooling of strontium atoms, focusing on its stability, which should provide cold and ultracold samples for the study of collective effects in light scattering. From the initial apparatus, innumerous changes were performed. The vacuum system got improved and now reached lower ultra high vacuum due to the pre-baking done to its parts and adding a titanium-sublimation stage. The quadrupole trap were improved by the design and construction of a new pair of coils. The stability of the blue, green and red laser systems and the loss prevention of laser light were improved, giving rise to a robust apparatus. Another important point is the development of homemade devices to reduce the costs and to be used as a monitor of different parts of an cold atoms experiment. From this homemade devices, we could demonstrate a dramatic linewidth narrowing by injection lock of an low cost 461 nm diode laser and its application to our strontium experiment. In the end, this improved experimental apparatus made possible the study of a new scattering effect, the mirror assisted coherent back-scattering (mCBS).

A novel information theory method for filter feature selection

In this paper, we propose a novel filter for feature selection. Such filter relies on the estimation of the mutual information between features and classes. We bypass the estimation of the probability density function with the aid of the entropic-graphs approximation of Rényi entropy, and the subsequent approximation of the Shannon one. The complexity of such bypassing process does not depend on the number of dimensions but on the number of patterns/samples, and thus the curse of dimensionality is circumvented. We show that it is then possible to outperform a greedy algorithm based on the maximal relevance and minimal redundancy criterion. We successfully test our method both in the contexts of image classification and microarray data classification.

Open business intelligence: on the importance of data quality awareness in user-friendly data mining

Citizens demand more and more data for making decisions in their daily life. Therefore, mechanisms that allow citizens to understand and analyze linked open data (LOD) in a user-friendly manner are highly required. To this aim, the concept of Open Business Intelligence (OpenBI) is introduced in this position paper. OpenBI facilitates non-expert users to (i) analyze and visualize LOD, thus generating actionable information by means of reporting, OLAP analysis, dashboards or data mining; and to (ii) share the new acquired information as LOD to be reused by anyone. One of the most challenging issues of OpenBI is related to data mining, since non-experts (as citizens) need guidance during preprocessing and application of mining algorithms due to the complexity of the mining process and the low quality of the data sources. This is even worst when dealing with LOD, not only because of the different kind of links among data, but also because of its high dimensionality. As a consequence, in this position paper we advocate that data mining for OpenBI requires data quality-aware mechanisms for guiding non-expert users in obtaining and sharing the most reliable knowledge from the available LOD.

Towards a reverse engineering approach for guiding user in applying data mining

Comunicación presentada en las XVI Jornadas de Ingeniería del Software y Bases de Datos, JISBD 2011, A Coruña, 5-7 septiembre 2011.

3D-based reconstruction using growing neural gas landmark: application to rapid prototyping in shoe last manufacturing

Customizing shoe manufacturing is one of the great challenges in the footwear industry. It is a production model change where design adopts not only the main role, but also the main bottleneck. It is therefore necessary to accelerate this process by improving the accuracy of current methods. Rapid prototyping techniques are based on the reuse of manufactured footwear lasts so that they can be modified with CAD systems leading rapidly to new shoe models. In this work, we present a shoe last fast reconstruction method that fits current design and manufacturing processes. The method is based on the scanning of shoe last obtaining sections and establishing a fixed number of landmarks onto those sections to reconstruct the shoe last 3D surface. Automated landmark extraction is accomplished through the use of the self-organizing network, the growing neural gas (GNG), which is able to topographically map the low dimensionality of the network to the high dimensionality of the contour manifold without requiring a priori knowledge of the input space structure. Moreover, our GNG landmark method is tolerant to noise and eliminates outliers. Our method accelerates up to 12 times the surface reconstruction and filtering processes used by the current shoe last design software. The proposed method offers higher accuracy compared with methods with similar efficiency as voxel grid.

La música como lenguaje de las emociones. Un análisis empírico de su capacidad performativa

Esta investigación estudia la relación entre las emociones y la música. Se efectúa un diseño de test-retest donde los individuos expresan qué música escucharían según estados de ánimo, para posteriormente pedir a una segunda muestra, distinta a la anterior, que valore en qué grado considera que dichas canciones expresan esos mismos estados de ánimo. Se ha efectuado un análisis de los rasgos musicales de dichas canciones. Se concluye que tanto en las emociones como en los rasgos musicales existe una dimensionalidad subyacente. En el caso de las emociones corresponde con las propuestas del diferencial semántico. En los rasgos musicales, se determinan dos dimensiones aún sin etiquetar teóricamente. Finalmente, se muestra la relación empírica entre rasgos musicales y emociones mediante un modelo estructural de medición.

3D reconstruction of medical images from slices automatically landmarked with growing neural models

In this study, we utilise a novel approach to segment out the ventricular system in a series of high resolution T1-weighted MR images. We present a brain ventricles fast reconstruction method. The method is based on the processing of brain sections and establishing a fixed number of landmarks onto those sections to reconstruct the ventricles 3D surface. Automated landmark extraction is accomplished through the use of the self-organising network, the growing neural gas (GNG), which is able to topographically map the low dimensionality of the network to the high dimensionality of the contour manifold without requiring a priori knowledge of the input space structure. Moreover, our GNG landmark method is tolerant to noise and eliminates outliers. Our method accelerates the classical surface reconstruction and filtering processes. The proposed method offers higher accuracy compared to methods with similar efficiency as Voxel Grid.