Retalho de rotação para defeitos da asa nasal

Surgical defects of the alar lobule can be difficult to repair with functional and aesthetically desirable results. Skin grafts are smoother and paler than the nasal skin. Flaps from the cheek and proximal nose can bridge the alar crease, resulting in obstruction. The authors describe a technique to repair nasal ala defects, with maintenance of the cosmetic unit, without airflow disturbance.

Estudo comparativo entre o tratamento radioterápico com elétrons e betaterapia, após cirurgia de queloides

Introduction: The surgery of keloids as an individual therapy with high rates of recurrence needs adjuvant therapies as complement. Recent keloids are rich in fibroblasts, which are highly radiosensitive and what explains the good results of percutaneous radiotherapy after surgery. Objective: To compare the beta-therapy results with electron-beam technique in newly operated keloids. Material and Methods: a prospective, comparative and randomized study was outlined including patients in the immediate postoperative period of surgical excision of keloids. Divided in G1 and G2 groups respectively, they received treatment with Sr90 (beta-therapy)plates or with electrons from the linear accelerator. The monitoring lasted 10 years. The results were performed using the information from patients, photograph parameters, observation and measurement of injuries, according to the criteria: Unchanged, Regular, Good and Excellent. Results: There were 26 patients, 13 in each group. In G1, 54% presented regular and unchanged improvement criteria and 46% had good or excellent criteria. In G2, the results were respectively 23% and 77%. Conclusion: The irradiation with electron-beam is better than beta-teraphy for the treatment of keloids surgery, due to the distribution in the tissue. No radio-induced tumors were observed.

Ensaio randomizado, duplo-cego e controlado de anestesia tópica induzida por iontoforese de lidocaína

Introduction: Needle infi ltration of local anesthetic is a painful procedure, thus, a topical anesthetic is a comfortable alternative; however, it is diffi cult to deliver transcutaneous polar drugs. Iontophoresis is a noninvasive technique that uses electrical current for releasing electrically charged drugs through biological membranes. Objective: To evaluate the anesthesia induced by iontophoresis of lidocaine for a standardized painful stimulus. Material and methods: Randomized, controlled, double-blind study, involving 10 volunteers under the anesthetic effects of topical application of lidocaine gel 2% and noradrenaline 1:50,000, with or without iontophoresis of 1.85 milliamps for 13 minutes. Pain sensitivity was evaluated by the prick of a 21G needle in the arms posterior region, using a visual numerical scale. Results: Patients mean age was 50.8 ± 11.4 years. Nine of them were women. All had previously received infi ltrative anesthesia. Iontophoresis was well tolerated by volunteers. The median pain scores were 0 and 3 for the arm that received the iontophoresis and for the one that did not receive, respectively (p < 0.01). Conclusion: The anesthetic effect in the region subjected to iontophoresis suggests an effi cient and comfortable method for promoting local anesthesia in the surgical approach of pediatric, hyperalgic, or needlephobic patients.

Color stability after accelerated aging of two silicones, pigmented or not, for use in facial prostheses

One of the greatest challenges faced by buccomaxillofacial prosthetists is to reproduce the patient's exact skin color and provide adequate esthetics. To reach this objective, professionals must use materials with easy characterization and that maintain color over long periods of time. The objective of this study was, thus, to evaluate the color stability of two types of silicones, Silastic 732 and Silastic MDX4-4210. Twenty-four test specimens were made from each type of silicone and were divided into a colorless group and groups intrinsically pigmented with ceramics, cosmetics or iron oxide. The specimens were submitted to an accelerated system of aging for non-metallic materials. Readings were carried out initially and after periods corresponding to 163, 351, 692 and 1,000 hours of aging, using a reflection spectrophotometer analysis, and color alterations were calculated by the CIE L*a*b* system. The data were submitted to variance analysis and Tukey's test at a 5% level of probability. The results demonstrated that, irrespective of the period of time analyzed, all the materials underwent some type of chromatic alteration (ΔE > 0). The test specimens made with Silastic 732 and MDX4-4210, without pigmentation, presented the lowest color alteration values after 1,000 hours of aging. Of the pigments, ceramic presented the lowest color alteration values and cosmetic powder presented the highest values. Thus, it may be concluded that the materials without the incorporation of pigments presented similar color alteration values, and did not differ statistically. The cosmetic powder used in this study was the pigment that most altered the color of the test specimens. © 2009 Sociedade Brasileira de Pesquisa Odontológica.

Study of ITO@PMMA composites by transmission electron microscopy

ITO nanowires were synthesized by carbothermal reduction process, using a co-evaporation method, and have controlled size, shape, and chemical composition. The electrical measurements of nanowires showed they have a resistance of about 102 Ω. In order to produce nanocomposites films, nanowires were dispersed in toluene using an ultrasonic cleaner, so the PMMA polymer was added, and the system was kept under agitation up to obtain a clear suspension. The PMMA polymer was filled with 1, 2, 5 and 10% in weight of nanowires, and the films were done by tape casting. The results showed that the electrical resistance of nanocomposites changed by over 7 orders of magnitude by increasing the amount of filler, and using 5 wt% of filler the composite resistance decreased from 1010 Ω to about 104 Ω, which means that percolation threshold of wires occurred at this concentration. This is an interesting result once for nanocomposites filled with ITO nanoparticles is necessary about 18% in weight to obtain percolation. The addition of filler up to 10 wt% decreased the resistance of the composite to 103 Ω, which is a value close to the resistance of wires. The composites were also analyzed by transmission electron microscopy (TEM), and the TEM results are in agreement with the electrical ones about percolation of nanowires. These results are promising once indicates that is possible to produce conductive and transparent in the visible range films by the addition of ITO nanowires in a polymeric matrix using a simple route. © 2011 Materials Research Society.

Necropsia cosmética em aves

Necropsy is a post-mortem criterious exam that helps in clinical diagnosis and consists in external and internal analysis of body cavities and organs of a corpse in order to determine the cause of death or to verify the extension and the nature of lesions caused by diseases. Considering the bonds between owners and their pets many veterinarians seems to visualize necropsy as a difficult task. This fact has gained great importance in avian Veterinary Medicine since bird owners have both love and economic bonds. Necropsy in often neglected in Veterinary Medicine although being a very important practice for the professional learning and also for reaching a reliable diagnosis of certain diseases. For this reason, this article aims to describe the procedure for performing avian cosmetic necropsy, which keeps the external characteristics of animals and increases the acceptance of owners by not disfiguring the corpse.

Excimer Laser no tratamento do vitiligo em 123 pacientes: estudo retrospectivo

Introduction: Vitiligo is cosmetically disfiguring and can cause significant psychological morbidity. Most therapies require protracted treatments and can lead to disappointing results. More recently, 308 nm Excimer laser has proven to be effective in treating vitiligo. Objective: To analyze the effectiveness and patient satisfaction of 308 nm Excimer treatment for vitiligo patches in a variety of locations on the body. Methods: Patients with generalized or localized vitiligo (n = 123, 321 lesions), were studied. The patients were treated at a private practice between 2007 and 2010. Two independent examiners analyzed the response to the therapy by comparing clinical and photographic records before and after treatment. Results: More than half (n = 77) of the patients presented repigmentation greater than 60%, 26 presented 40-59%, and 20% had levels less than 39%. Facial lesions responded better to treatment than those in other body parts. Elbows, hands and feet were the less sensitive areas. In general, the patients were satisfied with the treatment. Conclusion: The use of Excimer laser for treating vitiligo was effective and safe, producing satisfactory cosmetic results and improving patients' self esteem.

Cirurgia micrográfica de Mohs

Mohs Micrographic Surgery is regarded as a very useful technique for the excision of difficult to han- dle skin cancers. The procedure is divided into clearly defined steps: tumor evaluation and marking, tumor exeresis, tissue preparation and mapping, histologic processing and analysis, and closing of the surgical wound. The histologic analysis of all surgical margins leads to higher cure rates and tissue conservation, which make the procedure safer and more reliable.

Biomass production and chemical composition of essential oil of Piper callosum as affected by spacing in Manaus, Amazonas State, Brazil

The family Piperaceae contains nearly 2000 species, most of them distributed in two genera, Piper and Peperomia. In Brazil circa 170 Piper species are found, mainly in tropical areas Their use ranges from flavoring and culinary to raw material for pharmaceutical and cosmetic industry. One of these species, Piper callosum, is used in folk medicine in the Amazon area. The objective of this study was to evaluate the production of biomass (aerial parts) as well as yield and composition of the essential oil from the leaves, according to different spacing between cultivated plants at Embrapa Western Amazon, in Manaus, State of Amazonas, Brazil. The experimental design was randomized blocks, with four treatments and seven replicates with six plants. Biomass production was inversely proportional to the spatial arrangements, with the greatest biomass production (1034.93 kg/ha) in the shortest spacing (E1), although no statistical difference was verified between E3 and E4. The same response was observed for the production of essential oil. The chemical composition of the oil was not affected by spacing, and major compounds found were safrole (59.1%), beta-pinene (8.3%), alpha-pinene (6.5%), methyl eugenol (6.3%) and 1,8-cineole (4.1).

The challenges of treating a fused tooth

This paper describes and discusses the multidisciplinary treatment involving a permanent maxillary lateral incisor fused to a supernumerary tooth, both presenting pulp necrosis and periapical lesion. A 15-year-old male patient sought treatment complaining of pain, swelling and mobility on the maxillary right lateral incisor. After clinical and radiographic examination, root canal preparation was performed according to the crown-down technique and a calcium hydroxide dressing was placed for 15 days. The patient returned and the definitive endodontic filling was done with thermomechanical compaction of gutta-percha and sealer. After 18 months, clinical and radiographic examinations were carried out and no pain or swelling was reported. Two years after endodontic treatment, the patient returned for periodontal and cosmetic treatments. Nine months later, a cone-beam computed tomography (CBCT) revealed that the previously detected periodontal defect and periapical lesion were persistent. Apical endodontic surgery was indicated. The supernumerary tooth was removed, the communicating distal surface was filled and the surgical site received bioactive glass and demineralized bovine organic bone. The pathological tissue was submitted to histopathological examination and the diagnosis was periapical cyst. One year after the apical endodontic surgery, CBCT showed bone formation at maxillary lateral incisor apical area. Two years after the surgery, the restoration was replaced due to aesthetic reasons and periapical radiograph showed success after 5 years of treatment. A correct diagnosis and establishment of an adequate treatment plan resulted in a successful management of the case.

Development of a topical formulation containing S. Lutea extract: Stability, in vitro studies and cutaneous permeation

Flavonoids have been widely incorporated into cosmetic and dermatological formulations, affording benefits such as antioxidant action, improved skin tone and fewer lines and wrinkles. Brazil has a huge biodiversity, with one of the richest flora in the world, and existing studies justify the quest for greater research efforts in this area. The cajazeira (Spondias lutea L.), a plant of the Anacardiaceae family from tropical America, is widely disseminated in Brazil. This plant was chosen because of the presence of flavonoids that exhibit antioxidant activity. The purpose of this research was to develop a stable topical formulation containing Spondias lutea extract with the aim of preventing skin diseases caused by UV radiation. Hydro ethanolic extract of Spondias lutea fruit was prepared and assayed for its the flavonoids content. The antioxidant activity was estimated by DPPH and superoxide assay. The physicochemical stability and skin permeation of the cream containing 8% (w/w) of extract were assessed. The results showed that the S. lutea extract possessed antioxidant activity, and that it is possible to obtain a stable cosmetic containing the extract, which is able to penetrate the skin. Thus, it is possible to use this extract to produce an anti-aging cosmetic.

Retention and processing methods of nasal prosthesis

Patients with congenital malformations, traumatic or pathological mutilation and maxillofacial developmental disorders can be restored aesthetically and emotionally by the production and use of facial prostheses. The aim of this study was to review the literature about the retention and processing methods of facial prostheses, and discuss their characteristics. A literature review on Medline (PubMed) database was performed by using the keywords maxillofacial prosthesis, silicone, resin, pigment, cosmetic, prosthetic nose, based on articles published from 1956 to 2010. Several methods of retention, from adhesives to the placement of implants, and different processing methods such as laser, CAD/CAM and rapid prototyping technologies have been reported. There are advantages and disadvantages of each procedure, and none can be classified as better compared to others.

Shellac and hydroxyapatitte coatings on titanium niobium and AISI 316L steel surfaces produced by dip-coating

Shellac is a natural resin used for the preservation of fruits, bones and as a coating on drugs. The hydroxyapatite (HA), which is naturally found in human bones, is used as filler to substitute amputated bone or as a coating for prosthetics, promoting bone growth in implants of prostheses. The objective of this work is to immobilize HA from an alcoholic solution of shellac on plates of titanium, niobium and AISI 316L steel using the simple dip-coating method. The corrosion resistance of the uncoated films is compared with ones coated with shellac and shellac plus HA. The deterioration of the film composed of shellac with hydroxyapatite in saline solution follows the ascending order: AISI 316L steel, titanium, niobium. The elemental analysis of the shellac showed that it mainly consists of the elements C, H, N and O. We used the FT-IR spectrum to characterize the shellac and HA. ©The Electrochemical Society.

Anterior restorations in bleached teeth: Difficulty establishing the color after bleaching

It is becoming more common for patients to look for cosmetic procedures in dental offices. The search for lost or desired esthetics by patients is increasingly frequent and the professional must be able to meet this demand. To do this, dentists not only need to return the tooth back to its normal functioning state but also promote esthetic excellence. In this context, the association of cosmetic procedures, such as teeth whitening and restorative procedures, such as direct adhesive restorations is very common. The composite resins employed nowadays allow the reproduction of various optical properties of natural teeth. With these composite resins, it is possible to reproduce features such as translucency, opacity and specific features of the dental element, to bring back the esthetic harmony of the smile. This article reports a clinical case demonstrating the placement, in a stratified manner, of composite resins in bleached teeth, as well as the reproduction of optical and natural aspects of the teeth. In order to achieve esthetic and functional success of the restored procedure, it is important to be familiar with the new techniques and new materials in the marketand above all, we must know when and where to use them.

Análise sensorial como ferramenta útil no desenvolvimento de cosméticos

In assessing the quality of cosmetics, sensory analysis has an undisputed role as a tool of scientific measurement, since no analytical tool is capable of replacing the human senses. In product development, sensory analysis is a uniquely useful tool to measure consumer acceptance. The objective of this paper is to present a critical review of the issue based on published papers and sensory test results obtained by our research group, which can assist cosmetics development.