Flow patterns, performance and scale-up of distillation trays

This work is concerned with the nature of liquid flow across industrial sieve trays operating in the spray, mixed, and the emulsified flow regimes. In order to overcome the practical difficulties of removing many samples from a commercial tray, the mass transfer process was investigated in an air water simulator column by heat transfer analogy. The temperature of the warm water was measured by many thermocouples as the water flowed across the single pass 1.2 m diameter sieve tray. The thermocouples were linked to a mini computer for the storage of the data. The temperature data were then transferred to a main frame computer to generate temperature profiles - analogous to concentration profiles. A comprehensive study of the existing tray efficiency models was carried out using computerised numerical solutions. The calculated results were compared with experimental results published by the Fractionation Research Incorporation (FRl) and the existing models did not show any agreement with the experimental results. Only the Porter and Lockett model showed a reasonable agreement with the experimental results for cenain tray efficiency values. A rectangular active section tray was constructed and tested to establish the channelling effect and the result of its effect on circular tray designs. The developed flow patterns showed predominantly flat profiles and some indication of significant liquid flow through the central region of the tray. This comfirms that the rectangular tray configuration might not be a satisfactory solution for liquid maldistribution on sieve trays. For a typical industrial tray the flow of liquid as it crosses the tray from the inlet to the outlet weir could be affected by the mixing of liquid by the eddy, momentum and the weir shape in the axial or the transverse direction or both. Conventional U-shape profiles were developed when the operating conditions were such that the froth dispersion was in the mixed regime, with good liquid temperature distribution while in the spray regime. For the 12.5 mm hole diameter tray the constant temperature profiles were found to be in the axial direction while in the spray regime and in the transverse direction for the 4.5 mm hole tray. It was observed that the extent of the liquid stagnant zones at the sides of the tray depended on the tray hole diameter and was larger for the 4.5 mm hole tray. The liquid hold-up results show a high liquid hold-up at the areas of the tray with low liquid temperatures, this supports the doubts about the assumptions of constant point efficiency across an operating tray. Liquid flow over the outlet weir showed more liquid flow at the centre of the tray at high liquid loading with low liquid flow at both ends of the weir. The calculated results of the point and tray efficiency model showed a general increase in the calculated point and tray efficiencies with an increase in the weir loading, as the flow regime changed from the spray to the mixed regime the point and the tray efficiencies increased from approximately 30 to 80%.Through the mixed flow regime the efficiencies were found to remain fairly constant, and as the operating conditions were changed to maintain an emulsified flow regime there was a decrease in the resulting efficiencies. The results of the estimated coefficient of mixing for the small and large hole diameter trays show that the extent of liquid mixing on an operating tray generally increased with increasing capacity factor, but decreased with increasing weir loads. This demonstrates that above certain weir loads, the effect of eddy diffusion mechanism on the process of liquid mixing on an operating tray to be negligible.

The effect of R-plasmid RP1 on the properties of Proteus mirabilis

A clinical isolate of Proteus mirabilis containing R-plasmid RP1 (R+ cells), grown in both iron- and carbon- limited chemically defined media in mixed culture with plasmid-free (R- cells), did not disappear as expected, due to adherence of R+ cells to the wall of the chemostat vessel. Plasmid RP1 promoted adherence to glass and to medical prostheses. The hydrophobicity and surface charge of R+ cells were different from those of R- cells and both factors may contribute to the adherence of R+ cells to surfaces. The mode of cultivation of the cells, whether batch or continuous culture, were also found to affect the result. Antibodies raised against homologous cells increased the surface hydrophobicity of both R+ and R- cells and eliminated the differences between them. Results for surface hydrophobicity varied with the method used for measuring it. R+ cells were more sensitive than R- cells to tbe bacteridical action of normal serum and whole blood and to phagocytosis as measured by chemiluminescence. No clear differences were revealed in the protein antigens of R+ and R- cells by both SDS PAGE gels and immunoblots reacted with homologous antibodies. However, lectins revealed differences in the sugars exposed on the cell surfaces. Chemical analysis of R&43 and R- cells also revealed differences in the content of 2-keto-3-deoxy-D-manno-2-octulosonate, lipopolysaccharide and total fatty acids, when cells were grown in media containing added iron; however, no qualitative differences in the lipopolysaccharide were found. Removal of iron from the medium was found to have considerable effects on the chemical structure of R+ cells but not of R- ones. Adhesion to prostheses and to leucocytes is discussed in the light of the results and the clinical relevance outlined with respect to the initiation of infection and the association of virulence with antibiotic resistance.

Unrepeatered field transmission of 2 Tbit/s multi-banded coherent WDM over 124 km of installed SMF

In this paper we report field transmission of a 2Tbit/s multi-banded Coherent WDM signal over BT Ireland's installed SMF, using EDFA amplification only, with mixed Ethernet (with FEC) and PRBS payloads. To the best of our knowledge, the results obtained represent the highest total capacity transmitted over installed SMF with orthogonal subcarriers. BERs below 10(-5) and no frame-loss were recorded for all 49 subcarriers. Extended BER measurements over several hours showed fluctuations that can be attributed to PMD and to dynamic effects associated with clock instabilities.

Individual child cognitive behavioral treatment versus child-parent cognitive behavioral treatments for anxiety disorders in children and adolescents: Comparative outcomes

Anxiety disorders; such as separation anxiety disorder, generalized anxiety disorder, social phobia and specific phobia, are widespread in children and adolescents. Cognitive behavioral therapy (CBT) has been shown to be effective in reducing excessive fears and anxieties in children and adolescents. Research has produced equivocal findings that involving parents in treatment of child anxiety enhances effects over individual CBT (ICBT). The present dissertation study examined whether parental involvement can enhance individual treatment effect if the parent conditions are streamlined by targeting specific parental variables. The first parent condition, Parent Reinforcement Skills Training (RFST), involved increasing mothers' use of positive reinforcement and decreasing use of negative reinforcement. The second parent condition, Parent Relationship Skill Training (RLST), involved increasing maternal child acceptance and decreasing maternal control (or increasing autonomy granting). Results of the present dissertation findings support the use of all three treatment conditions (ICBT, RLST, RFST) for child anxiety; that is, significant reductions in anxiety were found in each of the three treatment conditions. No significant differences were found between treatment conditions with respect to diagnostic recovery rate, clinician rating, and parent rating of child anxiety. Significant differences between conditions were found on child self rating of anxiety, with some evidence to support the superiority of RLST and RFST to ICBT. These findings support the efficacy of individual, as well as parent involved CBT, and provide mixed evidence with respect to the superiority of parent involved CBT over ICBT. The conceptual, empirical, and clinical implications of the findings are discussed. ^

Efeitos do Kinesio Taping® sobre os marcadores clínicos indiretos de dano muscular induzido pelo exercício excêntrico: ensaio clínico randomizado

Objective: analyze the effect of Kinesio Taping (KT) on the indirect clinical markers of muscle damage induced by eccentric exercises in the elbow flexors in healthy individuals. Materials and methods: It is a randomized controlled trial involving sixty volunteers at age group between 18 and 28 years randomly selected. The sample into three groups with twenty participants: control group (CG) – eccentric protocol without KT, KT group – eccentric with tensioned KT, placebo group – eccentric protocol KT with no tension. The evaluations took place at four moments; the first one was the basis line (AV1), after the second protocol (AV2) and the following two groups 24 (AV3) and 48 hours (AV4) after the intervention protocol. The muscle damage was induced by sixteen maximum eccentric contractions of the elbow flexors from the non-dominant limb, divided in two sets of eight repetitions, at 60º/s, with two minutes interval. The variables analyzed were: the joint amplitude in rest, the level of pain, the joint position sense (JPS) followed of isokinetic checking with electromyographic sign capitation. These data were analyzed in software SPSS 20.0. The normality was identified by Kolmogorov-Smimov examination and then, being used the ANOVA mixed model with significance of 5%. Outcomes: a decrease was observed at joint amplitude moreover, an immediate increase of pain wich increased after 24 and remained until 48 hours at all groups searched. There was not difference at the JPS. The variables peak torque, average peak torque, total work and mean power mean reduced until 48 hours after muscle lesion in all groups. Among the groups, there was no difference in EMG values and for any of the variables. Conclusion: The KT did not influence at the indirect clinical markers of muscle lesion induced by eccentric exercises in the elbow flexors in healthy people.

Efeitos do Kinesio Taping® sobre os marcadores clínicos indiretos de dano muscular induzido pelo exercício excêntrico: ensaio clínico randomizado

Objective: analyze the effect of Kinesio Taping (KT) on the indirect clinical markers of muscle damage induced by eccentric exercises in the elbow flexors in healthy individuals. Materials and methods: It is a randomized controlled trial involving sixty volunteers at age group between 18 and 28 years randomly selected. The sample into three groups with twenty participants: control group (CG) – eccentric protocol without KT, KT group – eccentric with tensioned KT, placebo group – eccentric protocol KT with no tension. The evaluations took place at four moments; the first one was the basis line (AV1), after the second protocol (AV2) and the following two groups 24 (AV3) and 48 hours (AV4) after the intervention protocol. The muscle damage was induced by sixteen maximum eccentric contractions of the elbow flexors from the non-dominant limb, divided in two sets of eight repetitions, at 60º/s, with two minutes interval. The variables analyzed were: the joint amplitude in rest, the level of pain, the joint position sense (JPS) followed of isokinetic checking with electromyographic sign capitation. These data were analyzed in software SPSS 20.0. The normality was identified by Kolmogorov-Smimov examination and then, being used the ANOVA mixed model with significance of 5%. Outcomes: a decrease was observed at joint amplitude moreover, an immediate increase of pain wich increased after 24 and remained until 48 hours at all groups searched. There was not difference at the JPS. The variables peak torque, average peak torque, total work and mean power mean reduced until 48 hours after muscle lesion in all groups. Among the groups, there was no difference in EMG values and for any of the variables. Conclusion: The KT did not influence at the indirect clinical markers of muscle lesion induced by eccentric exercises in the elbow flexors in healthy people.

Combined effects of ocean acidification and light or nitrogen availabilities on 13C fractionation in marine dinoflagellates

Along with increasing oceanic CO2 concentrations, enhanced stratification constrains phytoplankton to shallower upper mixed layers with altered light regimes and nutrient concentrations. Here, we investigate the effects of elevated pCO2 in combination with light or nitrogen-limitation on 13C fractionation (epsilon p) in four dinoflagellate species. We cultured Gonyaulax spinifera and Protoceratium reticulatum in dilute batches under low-light (LL) and high-light (HL) conditions, and grew Alexandrium fundyense and Scrippsiella trochoidea in nitrogen-limited continuous cultures (LN) and nitrogen-replete batches (HN). The observed CO2-dependency of epsilon p remained unaffected by the availability of light for both G. spinifera and P. reticulatum, though at HL epsilon p was consistently lower by about 2.7 per mil over the tested CO2 range for P. reticulatum. This may reflect increased uptake of (13C-enriched) bicarbonate fueled by increased ATP production under HL conditions. The observed CO2-dependency of epsilon p disappeared under LN conditions in both A. fundyense and S. trochoidea. The generally higher epsilon p under LN may be associated with lower organic carbon production rates and/or higher ATP:NADPH ratios. CO2-dependent epsilon p under non-limiting conditions has been observed in several dinoflagellate species, showing potential for a new CO2-proxy. Our results however demonstrate that light- and nitrogen-limitation also affect epsilon p, thereby illustrating the need to carefully consider prevailing environmental conditions.

Outlier effects on robust joint modelling of longitudinal and survival data

Robust joint modelling is an emerging field of research. Through the advancements in electronic patient healthcare records, the popularly of joint modelling approaches has grown rapidly in recent years providing simultaneous analysis of longitudinal and survival data. This research advances previous work through the development of a novel robust joint modelling methodology for one of the most common types of standard joint models, that which links a linear mixed model with a Cox proportional hazards model. Through t-distributional assumptions, longitudinal outliers are accommodated with their detrimental impact being down weighed and thus providing more efficient and reliable estimates. The robust joint modelling technique and its major benefits are showcased through the analysis of Northern Irish end stage renal disease patients. With an ageing population and growing prevalence of chronic kidney disease within the United Kingdom, there is a pressing demand to investigate the detrimental relationship between the changing haemoglobin levels of haemodialysis patients and their survival. As outliers within the NI renal data were found to have significantly worse survival, identification of outlying individuals through robust joint modelling may aid nephrologists to improve patient's survival. A simulation study was also undertaken to explore the difference between robust and standard joint models in the presence of increasing proportions and extremity of longitudinal outliers. More efficient and reliable estimates were obtained by robust joint models with increasing contrast between the robust and standard joint models when a greater proportion of more extreme outliers are present. Through illustration of the gains in efficiency and reliability of parameters when outliers exist, the potential of robust joint modelling is evident. The research presented in this thesis highlights the benefits and stresses the need to utilise a more robust approach to joint modelling in the presence of longitudinal outliers.

Actitudes hacia la variedad caló y sus hablantes : Un estudio sociolingüístico de las opiniones de adolescentes andaluces

Caló is a language/variety spoken by the Spanish Calé (i.e. the Roma). The variety belongs to a group oflanguages referred to as “Para-Romani”, characterized by Romani vocabulary, but largely non-Romani morphology, phonology and syntax, in the case of Caló deriving from Spanish. Much research has been carried out regarding the vocabulary and the grammar of this variety.The conclusions drawn in those studies indicate that Caló is on its way to extinction. However, thereis an expressed interest in reintroducing the variety, in a form called “Romanó-Caló”. Language attitudes play a decisive role for the destiny of endangered languages. In order for arevitalization project to be successful, the attitudes towards the variety being reintroduced have to bepositive. The aim of this study is to measure the attitudes that both Calé and non-Calé have towards Calóand Caló speakers, a type of study never carried out in the past. The methods applied are both direct andindirect. In part one, 231 informants listened to different recordings of voices acting as either a “Spanishspeaking person” or a “Caló speaking person”, a technique referred to as ‘matched guise’. Firstly,the informants were asked to write down their first three impressions of the speakers. Secondly, nineshort questions related to the voices were asked, to which the subjects expressed their answers on attitudescales. They were also asked to match the voices with photos of people. Furthermore, theinformants have answered questions regarding what variety is spoken at home, as well as if he or she hasany knowledge of, or contact with, any language/variety, apart from Spanish. 182 informants continuedwith part two of the questionnaire, which consisted of 20 items – positive and negative statementstowards Caló and Caló speakers. The informants have rated their agreement or disagreement to thesestatements on a Likert scale. Another exercise measured the willingness of the informants to use Calówords for naming various objects. In addition, the subjects were tested on their knowledge of some Calówords, as well as asked whether they thought it was “useful” to know how to speak Caló. Variousstatistical methods have been used in order to establish whether or not the results are statisticallysignificant. The results of the analysis indicate that the attitudes differ towards Caló and Calóspeakers, depending on the informant’s (a) ethnicity (b) contact with Caló as well as with Calóspeakers, and (c) gender. It is those who – in their own opinion – belong to the ethnic group Calé, as wellas those who claim that they have some contact with the variety and its speakers, who show positiveattitudes in both parts of the study. The women also show more positive attitudes than the men. It is alsopossible to note positive attitudes towards the variety and its speakers among the subjects with a highlevel of knowledge of Caló words, as well as among those with the highest willingness to use Caló. These observations suggest that a revitalization project of the variety Caló has a clear chance ofbeing successful.

Quantifying Selection Bias from Birth History Estimates of Child Mortality

Thesis (Master's)--University of Washington, 2016-08

Catalizzatori polifunzionali per la sintesi di Metil Isobutil Chetone

In this work, we have examined the activity and selectivity of new catalysts for the single-stage production of methyl isobutyl ketone (MIBK, 4- methyl-2-pentanone) from acetone (both in liquid and gas phase), using a fixed bed reactor operated in the temperature range between 373 and 473 K. The main reaction pathways for the synthesis of MIBK from acetone are given in Fig.1. The first step is the self condensation of acetone to diacetone alcohol (DAA, 4-hydroxy-4-methyl-2-pentanone); the second step is the dehydration of DAA to mesityl oxide (MO, 4-methyl-3-penten-2-one); the final step is the selective hydrogenation of the carbon–carbon double bond of MO to form MIBK. The most commonly observed side reactions are over-condensations and unselective hydrogenations (also shown in Fig.1). Two types of catalysts were studied: i)Pd supported on MgO-SiO2 mixed oxides with ratio of Mg to Si, synthetized using Ohnishi’s method and ii)Pd supported on alumina doped with 5% or 10% of MgO. The different Mg-Si and Mg-Al catalysts were characterized by different techniques (XRD, BET, SEM, NH3-TPD and CO2-TPD) and tested under different conditions in the condensation of acetone to diacetone alcohol and its dehydration to mesityl oxide to enhance the activity. Palladium was chosen as metal component, and its hydrogenation activity was studied. A low hydrogenation activity negatively affects the acetone conversion and promotes the production of mesityl oxide. Hydrogenation conditions being too severe may favor the unwanted hydrogenation of acetone to 2-propanol and of MIBK to methyl isobutyl carbinol (MIBC, 4-methyl-2-pentanol) but this effect is less detrimental to the MIBK selectivity than an unsufficient hydrogenation activity.

Safe dance practice: uma abordagem estratégica sobre as condições psicomotoras e emocionais nas aulas de Técnica de Dança Contemporânea - 5º ano A da Escola de Dança do Conservatório Nacional

Relatório Final de Estágio apresentado à Escola Superior de Dança, com vista à obtenção do grau de Mestre em Ensino de Dança.

Creating and measuring customer value in digital businesses

Most economic transactions nowadays are due to the effective exchange of information in which digital resources play a huge role. New actors are coming into existence all the time, so organizations are facing difficulties in keeping their current customers and attracting new customer segments and markets. Companies are trying to find the key to their success and creating superior customer value seems to be one solution. Digital technologies can be used to deliver value to customers in ways that extend customers’ normal conscious experiences in the context of time and space. By creating customer value, companies can gain the increased loyalty of existing customers and better ways to serve new customers effectively. Based on these assumptions, the objective of this study was to design a framework to enable organizations to create customer value in digital business. The research was carried out as a literature review and an empirical study, which consisted of a web-based survey and semi-structured interviews. The data from the empirical study was analyzed as mixed research with qualitative and quantitative methods. These methods were used since the object of the study was to gain deeper understanding about an existing phenomena. Therefore, the study used statistical procedures and value creation is described as a phenomenon. The framework was designed first based on the literature and updated based on the findings from the empirical study. As a result, relationship, understanding the customer, focusing on the core product or service, the product or service quality, incremental innovations, service range, corporate identity, and networks were chosen as the top elements of customer value creation. Measures for these elements were identified. With the measures, companies can manage the elements in value creation when dealing with present and future customers and also manage the operations of the company. In conclusion, creating customer value requires understanding the customer and a lot of information sharing, which can be eased by digital resources. Understanding the customer helps to produce products and services that fulfill customers’ needs and desires. This could result in increased sales and make it easier to establish efficient processes.

Amidos crioulos: caracterização fundamental e influência de biopolímeros nas propriedades funcionais do amido

O trabalho apresentado nesta tese focou-se no estudo do amido, nomeadamente na avaliação das características físico-químicas, morfológicas, térmicas e reológicas do amido de seis variedades de milho crioulo, preservadas no estado de Santa Catarina (Brasil), com o intuito de contribuir para a valorização e preservação de variedades locais que são cultivadas em sistemas de produção orgânica, também conhecidas como variedades crioulas. Estas sementes são importantes quer para a preservação da biodiversidade quer para os pequenos produtores que as conservam e as produzem fazendo uso de uma agricultura sustentável e independente comercialmente. Para além da caracterização dos amidos crioulos foram também analisadas as alterações que ocorrem nos processos de gelatinização e retrogradação do amido quando realizados na presença de outros biopolímeros, nomeadamente a quitosana e galactomananas. No Capítulo I é apresentada uma breve revisão do conhecimento científico sobre o amido e sobre a quitosana e galactomananas, os outros biopolímeros utilizados. Igualmente é feita uma sucinta abordagem sobre as principais técnicas analíticas que foram utilizadas: reologia fundamental, calorimetria diferencial de varrimento, microscopia eletrónica de varrimento e espectroscopia de infravermelho médio. No capítulo II apresenta-se o isolamento dos amidos das seis variedades de milho crioulo e a sua caracterização junto com um amido comercial usado como modelo de comparação. Os amidos apresentaram genericamente características físicoquímicas semelhantes e o amido extraído das variedades crioulas MT e MPA 01 apresentaram menor temperatura de gelatinização e maior percentagem de retrogradação, respetivamente. Os efeitos da adição da quitosana e de três galactomananas (goma guar, goma de alfarroba e goma cassia) em sistemas mistos com o amido são analisados nos Capítulos III e IV respetivamente. A adição dos biopolímeros aos amidos resultou no aumento das temperaturas de gelatinização, na alteração da retrogradação do amido pelas galactomananas e na alteração das propriedades viscoeláticas dos géis formados. Os dados de infravermelho esclareceram que nos sistemas com quitosana, o amido formou complexos com o ácido acético usado para dissolver a quitosana e que esta por sua vez formou acetato de quitosana. O comportamento durante a gelatinização do amido comercial quando comparado com o amido do milho crioulo MPA na sua interação com as galactomananas é diferenciado.

Liderança e gestão escolar: um estudo qualitativo com diretores/presidentes e professores da RAM

Desenvolvemos um estudo de investigação a fim de fazermos uma análise sobre a matéria da organização, gestão e liderança escolar dos Diretores/Presidentes das escolas do segundo e terceiros Ciclos do Ensino Básico e do Ensino Secundário da Região Autónoma da Madeira (RAM). Nesta investigação foi utilizada uma metodologia mista com aplicação de um inquérito a 504 professores e a realização de 19 entrevistas semiestruturadas (18 a Diretores/Presidentes das instituições escolares, e uma ao Diretor Regional da Administração Educativa). Neste artigo iremos focar-nos nos resultados qualitativos resultantes da investigação. Os resultados do estudo revelaram que os professores continuam a preocupar-se com a transmissão dos valores fundamentais e alcance do sucesso educativo numa escola em crise; que o estilo de liderança predominantemente adotado pelos Diretores/Presidentes das escolas da Região Autónoma da Madeira (RAM) é o estilo transformacional; que o exercício do gestor/líder obedece a um perfil enquadrado num modelo de Diretor/Presidente padrão com caraterísticas bem determinadas.