3-D volume rendering maxillofacial analysis of angular measurements by multislice CT

Objective. This study was designed to determine the precision and accuracy of angular measurements using three-dimensional computed tomography (3D-CT) volume rendering by computer systems. Study design. The study population consisted of 28 dried skulls that were scanned with a 64-row multislice CT, and 3D-CT images were generated. Angular measurements, (n = 6) based upon conventional craniometric anatomical landmarks (n = 9), were identified independently in 3D-CT images by 2 radiologists, twice each, and were then performed by 3D-CT imaging. Subsequently, physical measurements were made by a third examiner using a Beyond Crysta-C9168 series 900 device. Results. The results demonstrated no statistically significant difference between interexaminer and intraexaminer analysis. The mean difference between the physical and 3-D-based angular measurements was -1.18% and -0.89%, respectively, for both examiners, demonstrating high accuracy. Conclusion. Maxillofacial analysis of angular measurements using 3D-CT volume rendering by 64-row multislice CT is established and can be used for orthodontic and dentofacial orthopedic applications.

Direct Observation of Tetragonal Distortion in Epitaxial Structures through Secondary Peak Split in a Synchrotron Radiation Renninger Scan

This paper reports a direct observation of an interesting split of the (022)(022) four-beam secondary peak into two (022) and (022) three-beam peaks, in a synchrotron radiation Renninger scan (phi-scan), as an evidence of the layer tetragonal distortion in two InGaP/GaAs (001) epitaxial structures with different thicknesses. The thickness, composition, (a perpendicular to) perpendicular lattice parameter, and (01) in-plane lattice parameter of the two epitaxial ternary layers were obtained from rocking curves (omega-scan) as well as from the simulation of the (022)(022) split, and then, it allowed for the determination of the perpendicular and parallel (in-plane) strains. Furthermore, (022)(022) omega:phi mappings were measured in order to exhibit the multiple diffraction condition of this four-beam case with their split measurement.

Degenerate Two-Photon Absorption in All-Trans Retinal: Nonlinear Spectrum and Theoretical Calculations

In this work we investigate the degenerate two-photon absorption spectrum of all-trans retinal ill ethanol employing the Z-scan technique with femtosecond pulses, The two-photon absorption (2PA) spectrum presents a monotonous increase as the excitation wavelength approaches the one-photon absorption band and it peak at 790 nm. We attribute the 2PA hand to the mixing of states (1)B(u)+-like and vertical bar S(1)>, which are strongly allowed by one- and two-photon, respectively. We modeled the 2PA spectrum by using the sum-over-states approach and obtained spectroscopic parameters of the electronic transitions to vertical bar S >, vertical bar S(2)> (""(1)Bu(+)""), vertical bar S(3)>, and vertical bar S(4)> singlet-excited states. The results were compared with theoretical predictions of one- and two-photon transition calculations using the response Functions formalism within the density functional theory framework with the aid of the CAM-B3LYP functional.

Two-photon absorption of perylene derivatives: Interpreting the spectral structure

This work investigates the two-photon absorption spectrum of perylene tetracarboxylic derivatives using the white-light continuum Z-scan technique. Perylene derivatives present relatively high two-photon absorption cross-section, which makes them attractive for applications in photonics. Because of the spectral resolution of the white-light continuum Z-scan, we were able to observe a well defined structure in the two-photon absorption spectrum, composed by two distinct peaks. These peaks, as well as the resonant enhancement of the nonlinearity, were modeled using the sum-over-states approach considering a four-level energy diagram with two final two-photon states. The existence of such states was confirmed using the response function formalism within the DFT framework. (C) 2009 Elsevier B.V. All rights reserved.

Prevalência de papilomavírus humano (HPV) e chlamydia trachomatis (CT) e sua associação com lesões cervicais em uma amostra de mulheres assintomáticas de Porto Alegre, RS

O câncer cervical acomete anualmente cerca de 470.000 mulheres em todo o mundo e mais de 16.000 mulheres no Brasil. O desenvolvimento do câncer cervical e sua associação ao Papilomavírus Humano (HPV) estão bem documentados, sendo este o fator principal para o desenvolvimento do câncer cervical. A infecção genital por Chlamydia trachomatis é estudada como um co-fator no desenvolvimento de neoplasias intraepiteliais cervicais (NICs) e outras alterações celulares significativas em mulheres com histórico de infecção por HPV. Este estudo tem como objetivo conhecer a prevalência de infecção por HPV e Chlamydia trachomatis em uma amostra de mulheres assintomáticas de uma área geográfica localizada na zona norte de Porto Alegre, bem como verificar as características associadas à presença desta co-infecção e sua relação com lesões cervicais. Trata-se de um estudo transversal cujo desfecho é a positividade ao HPV e à Chlamydia trachomatis em uma amostra de mulheres assintomáticas de Porto Alegre. Um total de 1217 amostras de material do colo do útero foi coletado para realização do exame citopatológico e para a identificação do DNA-HPV e DNA-CT através da técnica da Reação em Cadeia da Polimerase (PCR). Colposcopia e biópsia foram realizadas sempre que a citologia estivesse alterada e/ou a PCR para o HPV-DNA fosse positiva. A prevalência de HPV e Chlamydia trachomatis e sua distribuição por faixa etária são descritas, bem como a sua associação com as variáveis estudadas através das Razões de Chances (RC) estimadas por regressão logística múltipla. Observou-se uma prevalência de HPV-DNA de 28,4% (n=346/1217), de CT-DNA de 12,6% (n=152/1208) e de co-infecção por HPV e CT de 6,5% (n=78/1208). Mulheres não brancas (Razão de Chance (RC) =1,60; Intervalo de Confiança (IC) de 95%:1,10-2,38),assalariadas (RC=1,74; IC95%:1,17-2,60) e com parceiro apresentando história de condiloma genital (RC=2,35; IC95%:1,17-4,72) mostraram-se associadas com a positividade para HPV. A infecção por CT mostrou uma associação positiva com mulheres que iniciaram a vida sexual antes dos vinte anos (RC=1,82; IC95%:1,05-3,15) e assalariadas (RC=1,93; IC95%:1,15-3,25). Quanto à co-infecção por HPV e CT, mulheres com mais de três de parceiros sexuais na vida (RC=2,02; IC 95%:1,12-3,65) apresentaram uma associação positiva com o desfecho. Com relação à citologia, tanto a infecção por HPV quanto a co-infecção apresentaram associação significativa com anormalidades citológicas (p≤0.001). Os resultados mostraram uma elevada prevalência de HPV, de CT e de co-infecção em uma amostra de mulheres assintomáticas reforçando dados relatados na literatura. A associação destas infecções com variáveis sócioeconômicas, de comportamento sexual e com lesões do colo uterino, indicam a importância de medidas para a promoção e prevenção de saúde com este alvo específico dentro da rotina de serviços de atenção primária. Desta forma, acredita-se que estes dados possam ser muito úteis no planejamento de programas, incluindo o controle de Doenças Sexualmente Transmissíveis e a utilização de vacinas para o HPV.

Design of boundary-scan testing in CMOS image sensors for industrial applications: internship repor

Tests on printed circuit boards and integrated circuits are widely used in industry,resulting in reduced design time and cost of a project. The functional and connectivity tests in this type of circuits soon began to be a concern for the manufacturers, leading to research for solutions that would allow a reliable, quick, cheap and universal solution. Initially, using test schemes were based on a set of needles that was connected to inputs and outputs of the integrated circuit board (bed-of-nails), to which signals were applied, in order to verify whether the circuit was according to the specifications and could be assembled in the production line. With the development of projects, circuit miniaturization, improvement of the production processes, improvement of the materials used, as well as the increase in the number of circuits, it was necessary to search for another solution. Thus Boundary-Scan Testing was developed which operates on the border of integrated circuits and allows testing the connectivity of the input and the output ports of a circuit. The Boundary-Scan Testing method was converted into a standard, in 1990, by the IEEE organization, being known as the IEEE 1149.1 Standard. Since then a large number of manufacturers have adopted this standard in their products. This master thesis has, as main objective: the design of Boundary-Scan Testing in an image sensor in CMOS technology, analyzing the standard requirements, the process used in the prototype production, developing the design and layout of Boundary-Scan and analyzing obtained results after production. Chapter 1 presents briefly the evolution of testing procedures used in industry, developments and applications of image sensors and the motivation for the use of architecture Boundary-Scan Testing. Chapter 2 explores the fundamentals of Boundary-Scan Testing and image sensors, starting with the Boundary-Scan architecture defined in the Standard, where functional blocks are analyzed. This understanding is necessary to implement the design on an image sensor. It also explains the architecture of image sensors currently used, focusing on sensors with a large number of inputs and outputs.Chapter 3 describes the design of the Boundary-Scan implemented and starts to analyse the design and functions of the prototype, the used software, the designs and simulations of the functional blocks of the Boundary-Scan implemented. Chapter 4 presents the layout process used based on the design developed on chapter 3, describing the software used for this purpose, the planning of the layout location (floorplan) and its dimensions, the layout of individual blocks, checks in terms of layout rules, the comparison with the final design and finally the simulation. Chapter 5 describes how the functional tests were performed to verify the design compliancy with the specifications of Standard IEEE 1149.1. These tests were focused on the application of signals to input and output ports of the produced prototype. Chapter 6 presents the conclusions that were taken throughout the execution of the work.

Direct Observation of Tetragonal Distortion in Epitaxial Structures through Secondary Peak Split in a Synchrotron Radiation Renninger Scan

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparative analysis between a CAD model design and physical models obtained by manufacturing additive technologies using optical scan

This article presents a detailed study of the application of different additive manufacturing technologies (sintering process, three-dimensional printing, extrusion and stereolithographic process), in the design process of a complex geometry model and its moving parts. The fabrication sequence was evaluated in terms of pre-processing conditions (model generation and model STL SLI), generation strategy and physical model post-processing operations. Dimensional verification of the obtained models was undertook by projecting structured light (optical scan), a relatively new technology of main importance for metrology and reverse engineering. Studies were done in certain manufacturing time and production costs, which allowed the definition of an more comprehensive evaluation matrix of additive technologies.

Caffeine Determination at a Carbon Fiber Ultramicroelectrodes by Fast-Scan Cyclic Voltammetry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)