Desenvolvimento e caracterização de compósitos poli(tereftalato de etileno) reciclado (PET reciclado) com flocos de vidro.

The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate new products, enlarging the cycle of materials and energy which are present. Among the polymeric residues, there is poly (ethylene terephthalate) (PET). PET is used in food packaging, preferably in the bottling of carbonated beverages. The reintegration of post-consumer PET in half can be considered a productive action mitigation of environmental impacts caused by these wastes and it is done through the preparation of several different products at the origin, i.e. food packaging, with recycling rates increasing to each year. This work focused on the development and characterization mechanical, thermal, thermo-mechanical, dynamic mechanical thermal and morphology of the pure recycled PET and recycled PET composites with glass flakes in the weight fraction of 5%, 10% and 20% processed in a single screw extruder, using the following analytical techniques: thermogravimetry (TG), differential scanning calorimetry (DSC), tensile, Izod impact, Rockwell hardness, Vicat softening temperature, melt flow rate, burn rate, dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM). The results of thermal analysis and mechanical properties leading to a positive evaluation, because in the thermograms the addition of glass flakes showed increasing behavior in the initial temperatures of thermal decomposition and melting crystalline, Furthermore was observed growing behavior in the mechanical performance of polymer composites, whose morphological structure was observed by SEM, verifying a good distribution of glass flakes, showing difference orientation in the center and in the surface layer of test body of composites with 10 and 20% of glass flakes. The results of DMTA Tg values of the composites obtained from the peak of tan ä showed little reductions due to poor interfacial adhesion between PET and recycled glass flakes.

Estudo da adição de resíduo de scheelita em matriz cerâmica: formulação, propriedades físicas e microestrutura

Extractivism mineral is considered an activity highly degrading, due to the large volume of material that he moves in the form of ore and residues. The vast majority of mining companies do not show any technology or economically viable application that will allow the recycling of mineral residue, these being launched in areas receiving located the "open skies" degrade the environment. In Rio Grande do Norte to the production of ceramic red restricts their activities to the production of products such as: solid bricks, ceramic blocks, tiles, among others. Seeking to unite experiences and technical information that favor sustainable development, with important benefits to the construction sector and civil society in general, the present work studies the incorporation of the residue of scheelite in ceramic matrix kaolinitic, coming from the municipality of Boa Saúde - RN, in percentage of 5 %, 10 %, 20 %, 30% 40% and 50 %, by evaluating its microstructure, physical properties and formulation. The raw materials were characterized through the trials of X ray fluorescence, Diffraction of X rays, Differential Thermal Analysis and Termogravimetric Analysis. The samples were formed and fired at temperatures of 850o, 900o, 1000o, 1050o, 1100o, 1150o and 1200 oC, with isotherm of 1 hour and heating rate of 10 oC/min. Assays were performed technological of loss to fire, Water Absorption, Apparent Porosity, Apparent Density, Mass Loss in Fire and Bending Resistance; in addition to the Scanning Electron Microscopy, analyzing their physical and mechanical properties. The use of residue of scheelite in ceramic mass kaolinitic provided a final product with technological properties that meet the technical standards for the production of bricks and roofing tiles, with the percentage of 20% of waste that showed the best results

Desenvolvimento e caracterização de compósito a partir da borra da piaçava para construção da parábola de um fogão solar a concentração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Estudo do resíduo fosfogesso na formulação de uma pasta para revestimento interno de edifícios

Universidade Federal do Rio Grande do Norte

Avaliação de concreto com adição de fibras de PET submetido a altas temperaturas

The concrete for centuries constituted an essential structural element in the construction industry due to its relative ease of forming, before the weather durability, low cost, its lower maintenance compared to other materials such as steel. However, when the concrete is exposed to high temperatures tends to lose its mechanical characteristics, and may even result in loss of section, which undermines the stability and mechanical strength of structural elements. The pathologies resulting from exposure to elevated temperatures ranging from cracks, pops up chipping explosives (spalling). Recently, the technology of concrete is closely related to the study of its microstructure. The use of fibers added to concrete has been revealed as a solution to increase the mechanical strength of the concrete, it acts directly on the distribution of efforts to act in the play within the microstructure. In this work we used recycled PET fibers embedded in concrete with 15x2mm fck = 30MPa, water/cement ratio of 0.46, in works made for verification of mechanical strength of this mixture submitted to high temperature. The specimens of concrete with addition of PET fibers were tested after exposure to temperatures: ambient (30ºC), 100°C, 200°C, 300°C, 400°C, 600°C and 900°C. It was found that the concrete loses significant strength when exposed to temperatures above 300°C, however the use of fiber PET may delay the risk of collapse of structures for the formation of a network of channels that facilitate the escape of vapor 'water, reducing the pore pressure inside the structural element

Balanced Scorecard: fatores relevantes de sua implantação na diretoria de mercado de capitais do Banco do Brasil

Este trabalho objetiva determinar que características do corpo funcional da DIMEC (Diretoria de Mercado de Capitais do Banco do Brasil) estão associadas aos principais entraves considerados relevantes pelos funcionários da área durante a implementação do Balanced Scorecard (BSC). Pretende-se salientar como entraves tais como a falta de apoio de Tecnologia de Informação e a falta de hábito dos funcionários em lidar com indicadores não financeiros podem se relacionar com as características de interesse do corpo funcional, tais como nível hierárquico , formação acadêmica e nível de conhecimento da ferramenta BSC , de forma a influenciar na implementação do modelo. Para tanto foi realizada revisão de literatura e estudo de caso no qual figuraram, como instrumentos de coleta de dados, a aplicação de questionários e a entrevista não-estruturada através dos quais funcionários da DIMEC demonstraram as relações entre as variáveis descritas de forma a destacar fatores de relevância para o desenrolar do processo de implantação da ferramenta BSC na referida empresa

Turismo de eventos como estratégia no combate à sazonalidade: uma análise na hotelaria de Natal - RN

The aim of this work is to analyse the tourism events and the performance of this segment from market as strategy in the combat of Natal's hotel seasonality, in the executives/managers's vision from this sector. Two searches were realized to turn available this study: Inicialy a bibliographic search involving the concepts associated with the tematic in question so that it arranges the embasament theoric-scientific and a survey from facts through the country search, where it was applicable in the establishments of work's population with the auxiliary from a formulary answered by a personal interview. The analyses techniques through facts were: estatistic descritive and Kolmogorov-smirnov test.Among the results found, it was verified that the main reasons alleged by the hotels to ingress in the segment from the events were the alinement from the competitive company, the diversification in the options in the sense of occupy the establishments during the period of low season and answer to the demand of market. Investigated the profile from the events occured in the Natal hotels referring to the port, public origin , kinds of events and frequency from their realizations, as well as , the capacity from these establishments to attend this segment.It was noticed that in spite of the hotels agree that the events are important estrategies to combat the seasonality, the establishments still suffer with the flutuation, what can be justified from the moment that it's considered that the events also behave from seasonal manner, having more concentration in certain periods from the year. It was evaluated that the main advantage noticed by the realization from the hotels's events is the utilization from alimentation and drinking services, surpassing the advantage from elevation of taxes occupation from the apartments

A Produção mais Limpa como ferramenta em busca da sustentabilidade empresarial: um estudo de múltiplos casos em empresas do Estado do Rio Grande do Norte

This study aimed to assess the Cleaner Production CP as corporate sustainable tool, through the multiple case studies within companies from Rio Grande do Norte State. In order to achieve this goal a research methodology approach was set. The initial stage of the research methodology was based on a literature review on which it was observed that the CP can be linked with corporate sustainable once it prevents pollution and reduces the operational risks among employees, community and environment. In addition, CP can useful for companies position within competitive position as well as being applied to process, products and services. In order to observe these factors, CP was used within food industry (Company 1), textile industry (Company 2) and in a car dealer (Company 3). Regarding the results, Company 1 changed its raw material as well as implementing housekeeping (control use of water, energy and condensed milk). In Company 2, it was observed the three levels of CP. In other words, housekeeping (e.g. cutting process and manipulation of chemical products), changing technology (high pressure washing machine) and internal and external recycling. In addition, Company 3 considered only level 3 external recycling. As consequence, it was observed that can be applied either within industry as well as service sector. Unfortunately, it was not possible to observe any social gains on a monetary basis. This is due to limitations of the CP methodology and study complexity. Therefore, it was observed improvements regarding to social, environmental and economic areas. Nevertheless, it is necessary more commitment from top level management in order to consider CP like effective sustainable tool

Utilização do controle estatístico do processo para monitoramento do peso médio de cápsulas de Tuberculostáticos: estudo de caso no NUPLAM- RN

This Master Thesis presents a case study on the use of Statistical Process Control (SPC) at the Núcleo de Pesquisas em Alimentos e Medicamentos (NUPLAM). The SPC basic tools have been applied in the process of the tuberculostáticos drugs encapsulation, primarily concerning the objective to choose, between two speeds, which one is the best one to perform the tuberculostatics encapsulation. Later on, with the company effectively operating, the SPC was applied intending to know the variability of the process and, through the tracking of the process itself, to arrive at an estimated limit for the control of future lots of tuberculostatics of equal dosage. As special causes were detected acting in the process, a cause-and-effect diagram was built in order to try to discover, in each factor that composes the productive process, the possible causes of variation of the capsules average weight. The hypotheses raised will be able to serve as a base for deepened the study to eliminate or reduce these interferences in the process. Also a study on the capacity of the process to attend the specifications was carried out, and this study has shown the process´s inaptitude to take care of them. However, on the side of NUPLAM exists a real yearning to implant the SPC and consequently to improve the existing quality already present on its medicines

Adoção de tecnologias móveis em empresas do Rio Grande do Norte, Pernambuco e Ceará

One of the best examples of the Information and Communication Technology (ICT) evolutions is on the high capability of storing and processing data into smaller devices, creating a new business condition, the mobility . This mobility in a deeper analysis proposes a business remodeling in many different areas (business segmentations), through the Internet anywhere at any time, allowing managers and researchers to think again their actual models that work nowadays in companies and public institutions, modifying the way internal and external clients can be attended. This thesis analyzes issues on mobile business adoption, technological evolutions and the impacts caused by this new reality the access to information anywhere at any time . This research is exploratory and shows a compilation of similar papers and thesis describing how was conducted the survey within 50 companies in the states of Rio Grande do Norte, Pernambuco and Ceará. The statistics analysis showed the different level of mobile technology usage from simple voice communications to wide band data transmission. The analysis pointed that canonic correlation was the most effective type of analysis to describe the relations among all groups of variables showing which of them are relevant, or not, for mobile technology adoption

Aceitabilidade da carne caprina no hábito alimentar e percepção sobre o impacto ambiental na produção de caprinos no nordeste entre estudantes universitários

The present work has an objective of investigate the acceptability of consumption of the goat meat and studies the perception of university students on the productive sector of goats in the Northeast. The habit to eat goat meat has strong regional traditions and has been suffering the demographic, cultural, economic and personal influences. Currently, a new habit in the food consumers is observed and has been configuring itself a trend that concern with the health and welfare in general, in countries mainly developed. This fact comes directly contributing for the modernization of the production models, including the ambient conscience. The methodology applied includes bibliographical research, data-collecting through questionnaires applied in the UFRN (Federal University of Rio Grande do Norte ) and analysis of the data using statistic techniques assisted for software Statistica V6. It is concluded that the rate of consumption of goat meat is low in the population studied. The frequency of consumption is higher in times of leisure or to visit relatives. The descriptive analysis of the responses of interviewees shows ignorance of the production of goat meat and its importance to the state of Rio Grande do Norte.

Análise antropotecnológica do desenvolvimento de novos produtos na produção artesanal : caso das rendeiras de bilro da Vila de Ponta Negra em Natal, RN

Brazilian craft production plays an important role in the generation of employment and income for many families in every state across Brazil. In Natal, Rio Grande do Norte, Brazil, among many types found, identifies itself with the production of bobbin-lace, still practiced in Ponta Negra Village for ancient craftswomens of city that try to preserve the art and tradition of bobbin-lace. This work presents the results of an analysis conducted based in concepts of anthropotechnology, on the effects of a design workshop held with bobbin-lace craftswomen in the village of Ponta Negra in July of 2006. The workshop was intended to propose a new concept of products and a new alternative for production in the activity of the craftswomen, on the premise that the laces could be used as a detail inserted into other industrial products such as shirts, bags, towels, etc. Evaluations after the workshop showed that none of the artisans continued to work, indicating that actions focused solely on products did not generate representative results in the production of bobbin-lace. Evaluations also indicated that knowledge about the artisan's personal and professional characteristics, organization, pace, workload, and cultural and historical issues that permeate the activity are essential to the success of technology transfer, particularly when the transfer affects the craft production as it relates to the inseparable aspects of the craftswomen's work and lifestyle

Utilização de soluções business-to-business (B2B) no segmento downstream da cadeia de suprimentos de uma distribuidora de combustíveis

The pursuit of competitive advantage is lobbying organizations to strategically plan the use of their material, human, technological and financial resources, so that it s possible to add value to the product, even when it is considered a commodity. The scenario for this planning should not be limited to the company in question, but cover an entire supply chain, which is composed of several organizations which have common goals of growth and sustainability of the market. They should form trade links, integrating the chains of individual values, in a perspective of value system. In this supply chain there is a flow of services, payments and information, as products well as. The training of these links can be supported by the adoption of a set of information technology, here called solutions business-to-business (B2B), which will be responsible for the production, storage and distribution of relevant information to business transactions between the companies involved. On this view, this thesis aims to describe the B2B solutions adopted in the downstream segment of the supply chain of a distributor of fuel and the nature of these technologies as well as their impact on the creation of value for business and optimization of the relationship between companies. This is a case study on a national distributor of fuels, from a model of research produced under the influence of theories of integrated logistics system and value of Michael Porter. The analyses came to the conclusion that information technology is perceived as an essential tool to the operation of all activities carried out by the company. Among them, at was also brought the key activities of integrated logistics: administration of applications, inventory management, management transport and customer services, which were highlighted in this study. It was also noticed that even these activities are, in principle, purely operational; they all had in the adoption of strategies for leadership in cost or differentiation, supported by B2B solutions identified, making it more conducive to business and direct customer, the clinic reseller of fuel, to obtain value and benefits of this market segment as competitive

Desenvolvimento de protótipo de cadeira de banho para indivíduos com paralisia cerebral tetraparética espástica

This study proposes to develop an equipment that attends the demands of tetraplegic people due to cerebral palsy and that promotes an adequate caregivers postural biomechanics during the shower activity of daily living. First, a bibliographic review was performed to define the terms refering to cerebral palsy, activity of daily living (specifically shower), and assistive technology, besides listing the wheelchairs made on the mainly national assistive technology companies. Therefore, this is a descriptive-exploratory study based on a literature review and on a based-field exploration research. On the field research a survey was adopted as a methodological procedure as it is related to a direct investigation related to a phenomenon, on the case, represented by the current shower situation of the people investigated in this study. Data were collected with the application of a form to the caregivers and consumers of the medical-therapeutic treatment and place used by the participants. Such form, which was made up of open and close questions, tried to identify, besides the personal data of evaluated users and consumers, the characteristics of the current shower activity, such as the place where it takes place in the house, the used equipmentS, in the case there is any, and how often it occurs. The form also was used to identify the caregivers and consumers desires and perceptions in relation to the present characteristics of the new dispositive besides the users and consumers anthropometric data. The evaluation of the results obtained through the form, together with the practice and clinical experience of the researchers and engineers involved in this study, made it possible to develop and make up a real shower chair prototype with the specific adjusts destined to adequate the equipment to be used according to the needs of each user and consumer

Um estudo da aplicação do conceito de risco na conscientização e conhecimento de estudantes de ensino técnico sobre riscos de segurança e saúde ocupacional em laboratório de soldagem

This dissertation presents a discussion on the level of risk awareness of students who have welding practice in the laboratories at CEFET/PI, both in Teresina and Floriano. Its main goal is to investigate risk factors involving students, teachers and employees that work in these laboratories. It s an empirical survey, held among a certain amount of students from the course in Mechanic Technology. For data analysis, the concept of risk was compared to the students direct measure of perception. The main results suggest the students must be better informed, more risk aware and more competent, in order to avoid accidents. They also point to a strong need for a more formal and effective performance to assure full consciousness about the risks involving the welding practice.