Pain assessment in PICU and NICU: Have we got it right?

Pain assessment in critically ill infants and nonverbal children remains a challenge for health professionals. Despite the numerous pain observational measures that have been developed or adapted for infants and children with impaired communication, pain prevalence in paediatric and neonatal intensive care unit remains too high. As pain assessment has been recognised as a pre-requisite for appropriate pain management, much effort was put in the validation or the adaptation of pain measures with little emphasis on implementation of these instruments into practice. Only a few studies demonstrated the benefit of using standardised protocols for the management of pain to guide practice with variable effects. When standardised protocols are undeniably useful in practice, they do not replace health professionals' clinical reasoning necessary to care for individuals. The diversity of the PICU population makes that pain scores need to be interpreted within its clinical context. This session will present pain assessment as a complex transaction that describes structured clinical reasoning from expert nurses that goes beyond the "silver" standard of hetero-evaluation of pain in non-communicative children. Besides pain scores, several patients and nurses factors play a major role in making decisions about analgesia and/or sedation. Patient's clinical instability, change in patient's clinical status, source for observed agitated behaviour, patient's known reactions to analgesia and sedation and anticipation of risks are factors that should be taken into account when implementing pain assessment and management guidelines in PICU and NICU.

Study Regarding Implementation of a Uniform Statewide System to Allow for Electronic Transactions for the Registration and Titling of Motor Vehicles

LEGISLATIVE STUDY – The 83rd General Assembly of the Iowa Legislature, in Senate File 2273, directed the Iowa Department of Transportation (DOT) to conduct a study of how to implement a uniform statewide system to allow for electronic transactions for the registration and titling of motor vehicles. PARTICIPANTS IN STUDY – As directed by Senate File 2273, the DOT formed a working group to conduct the study that included representatives from the Consumer Protection Division of the Office of the Attorney General, the Department of Public Safety, the Department of Revenue, the Iowa State County Treasurer’s Association, the Iowa Automobile Dealers Association, and the Iowa Independent Automobile Dealers Association. CONDUCT OF THE STUDY – The working group met eight times between June 17, 2010, and October 1, 2010. The group discussed the costs and benefits of electronic titling from the perspectives of new and used motor vehicle dealers, county treasurers, the DOT, lending institutions, consumers and consumer protection, and law enforcement. Security concerns, legislative implications, and implementation timelines were also considered. In the course of the meetings the group: 1. Reviewed the specific goals of S.F. 2273, and viewed a demonstration of Iowa’s current vehicle registration and titling system so participants that were not users of the system could gain an understanding of its current functionality and capabilities. 2. Reviewed the results of a survey of county treasurers conducted by the DOT to determine the extent to which county treasurers had processing backlogs and the extent to which county treasurers limited the number of dealer registration and titling transactions that they would process in a single day and while the dealer waited. Only eight reported placing a limit on the number of dealer transactions that would be processed while the dealer waited (with the number ranging from one to four), and only 11 reported a backlog in processing registration and titling transactions as of June 11, 2010, with most backlogs being reported in the range of one to three days. 3. Conducted conference calls with representatives of the American Association of Motor Vehicle Administrators (AAMVA) and representatives of three states -- Kansas, which has an electronic lien and titling (ELT) program, and Wisconsin and Florida, each of which have both an ELT program and an electronic registration and titling (ERT) program – to assess current and best practices for electronic transactions. In addition, the DOT (through AAMVA) submitted a survey to all U.S. jurisdictions to determine how, if at all, other states implemented electronic transactions for the registration and titling of motor vehicles. Twenty-eight states responded to the survey; of the 28 states that responded, only 13 allowed liens to be added or released electronically, and only five indicated allowing applications for registration and titling to be submitted electronically. DOT staff also heard a presentation from South Dakota on its ERT system at an AAMVA regional meeting. ELT information that emerged suggests a multi-vendor approach, in which vendors that meet state specifications for participation are authorized to interface with the state’s system to serve as a portal between lenders and the state system, will facilitate electronic lien releases and additions by offering lenders more choices and the opportunity to use the same vendor in multiple states. The ERT information that emerged indicates a multi-interface approach that offers an interface with existing dealer management software (DMS) systems and through a separate internet site will facilitate ERT by offering access that meets a variety of business needs and models. In both instances, information that emerged indicates that, in the long-term, adoption rates are positively affected by making participation above a certain minimum threshold mandatory. 4. To assess and compare functions or services that might be offered by or through a vendor, the group heard presentations from vendors that offer products or services that facilitate some aspect of ELT or ERT. 5. To assess the concerns, needs and interest of Iowa motor vehicle dealers, the group surveyed dealers to assess registration and titling difficulties experienced by dealers, the types of DMS systems (if any) used by dealers, and the dealers’ interest and preference in using an electronic interface to submit applications for registration and titling. Overall, 40% of the dealers that responded indicated interest and 57% indicated no interest, but interest was pronounced among new car dealers (75% were interested) and dealers with a high number of monthly transactions (85% of dealers averaging more than 50 sales per month were interested). The majority of dealers responding to the dealer survey ranked delays in processing and problems with daily limits on transaction as ―minor difficulty or ―no difficulty. RECOMMENDATIONS -- At the conclusion of the meetings, the working group discussed possible approaches for implementation of electronic transactions in Iowa and reached a consensus that a phased implementation of electronic titling that addressed first electronic lien and title transactions (ELT) and electronic fund transfers (EFT), and then electronic applications for registration and titling (ERT) is recommended. The recommendation of a phased implementation is based upon recognition that aspects of ELT and EFT are foundational to ERT, and that ELT and EFT solutions are more readily and easily attained than the ERT solution, which will take longer and be somewhat more difficult to develop and will require federal approval of an electronic odometer statement to fully implement. ELT – A multi-vendor approach is proposed for ELT. No direct costs to the state, counties, consumers, or dealers are anticipated under this approach. The vendor charges participating lenders user or transaction fees for the service, and it appears the lenders typically absorb those costs due to the savings offered by ELT. Existing staff can complete the programming necessary to interface the state system with vendors’ systems. The estimated time to implement ELT is six to nine months. Mandatory participation is not recommended initially, but should be considered after ELT has been implemented and a suitable number of vendors have enrolled to provide a fair assessment of participation rates and opportunities. EFT – A previous attempt to implement ELT and EFT was terminated due to concern that it would negatively impact county revenues by reducing interest income earned on state funds collected by the county and held until the monthly transfer to the state. To avoid that problem in this implementation, the EFT solution should remain revenue neutral to the counties, by allowing fees submitted by EFT to be immediately directed to the proper county account. Because ARTS was designed and has the capacity to accommodate EFT, a vendor is not needed to implement EFT. The estimated time to implement EFT is six to nine months. It is expected that EFT development will overlap ELT development. ERT – ERT itself must be developed in phases. It will not be possible to quickly implement a fully functioning, paperless ERT system, because federal law requires that transfer of title be accompanied by a written odometer statement unless approval for an alternate electronic statement is granted by the National Highway Traffic Safety Administration (NHTSA). It is expected that it will take as much as a year or more to obtain NHTSA approval, and that NHTSA approval will require design of a system that requires the seller to electronically confirm the seller’s identity, make the required disclosure to the buyer, and then transfer the disclosure to the buyer, who must also electronically confirm the buyer’s identity and electronically review and accept the disclosure to complete and submit the transaction. Given the time that it will take to develop and gain approval for this solution, initial ERT implementation will focus on completing and submitting applications and issuing registration applied for cards electronically, with the understanding that this process will still require submission of paper documents until an electronic odometer solution is developed. Because continued submission of paper documents undermines the efficiencies sought, ―full‖ ERT – that is, all documents necessary for registration and titling should be capable of approval and/or acceptance by all parties, and should be capable of submission without transmittal or delivery of duplicate paper documents .– should remain the ultimate goal. ERT is not recommended as a means to eliminate review and approval of registration and titling transactions by the county treasurers, or to place registration and titling approval in the hands of the dealers, as county treasurers perform an important role in deterring fraud and promoting accuracy by determining the genuineness and regularity of each application. Authorizing dealers to act as registration agents that approve registration and title applications, issue registration receipts, and maintain and deliver permanent metal license plates is not recommended. Although distribution of permanent plates by dealers is not recommended, it is recommended that dealers participating in ERT generate and print registration applied for cards electronically. Unlike the manually-issued cards currently in use, cards issued in this fashion may be queried by law enforcement and are less susceptible to misuse by customers and dealers. The estimated time to implement the electronic application and registration applied for cards is 12 to 18 months, to begin after ELT and EFT have been implemented. It is recommended that focus during this time be on facilitating transfers through motor vehicle dealers, with initial deployment focused on higher-volume dealers that use DMS systems. In the long term an internet option for access to ERT must also be developed and maintained to allow participation for lower-volume dealers that do not use a DMS system. This option will also lay the ground work for an ERT option for sales between private individuals. Mandatory participation in Iowa is not recommended initially. As with ELT, it is recommended that mandatory participation be considered after at least an initial phase of ERT has been implemented and a suitable number of dealers have enrolled to provide a fair assessment of participation rates and opportunities. The use of vendors to facilitate ERT is not initially proposed because 1) DOT IT support staff is capable of developing a system that will interact with DMS systems and will still have to develop a dealer and public interface regardless of whether a vendor acts as intermediary between the DMS systems, and 2) there is concern that the cost of the vendor-based system, which is funded by transaction-based payments from the dealer to the vendor, will be passed to the consumer in the form of additional documentation or conveyance fees. However, the DOT recommends flexibility on this point, as development and pilot of the system may indicate that a multi-vendor approach similar to that recommended for ELT may increase the adoption rate by larger dealers and may ultimately decrease the user management to be exercised by DOT staff. If vendors are used in the process, additional legislation or administrative rules may be needed to control the fees that may be passed to the consumer. No direct cost to the DOT or county treasurers is expected, as the DOT expects that it may complete necessary programming with existing staff. Use of vendors to facilitate ERT transactions by dealers using DMS systems would result in transaction fees that may ultimately be passed to consumers. LEGISLATION – As a result of the changes implemented in 2004 under Senate File 2070, the only changes to Iowa statutes proposed are to section 321.69 of the Iowa Code, ―Damage disclosure statement,and section 321.71, ―Odometer requirements.‖ In each instance, authority to execute these statements by electronic means would be clarified by authorizing language similar to that used in section 321.20, subsections ―2‖ and ―3,‖ which allows for electronic applications and directs the department to ―adopt rules on the method for providing signatures for applications made by electronic means.‖ In these sections, the authorizing language might read as follows: Notwithstanding contrary provisions of this section, the department may develop and implement a program to allow for any statement required by this section to be made electronically. The department shall adopt rules on the method for providing signatures for statements made by electronic means. Some changes to DOT administrative rules will be useful but only to enable changes to work processes that would be desirable in the long term. Examples of long term work processes that would be enabled by rule changes include allowing for signatures created through electronic means and electronic odometer certifications. The DOT rules, as currently written, do not hinder the ability to proceed with ELT, EFT, and ERT.

Liming influence on soil chemical properties, nutritional status and yield of alfalfa grown in acid soil

Alfalfa is an important forage crop with high nutritive value, although highly susceptible to soil acidity. Liming is one of the most efficient and prevailing practices to correct soil acidity and improve alfalfa yield. The objective of this study was to evaluate response to liming of alfalfa grown in a greenhouse on a Typic Quartzipsamment soil. The treatments consisted of four lime rates (0, 3.8, 6.6 and 10.3 Mg ha-1) and two cuts. Alfalfa dry matter increased quadratically with increasing lime rates. In general, dry matter yield was maximized by a lime rate of 8.0 Mg ha-1. Except for the control, the dry matter nutrient contents in the treatments were adequate. The positive linear correlation between root and nodule dry matter with lime rates indicated improvement of these plant traits with decreasing soil acidity. The soil acidity indices pH, base saturation, Ca2+ concentration, Mg2+ concentration, and H + Al were relevant factors in the assessment of alfalfa yield. The magnitude of influence of these soil acidity indices on yield as determined by the coefficient of determination (R²) varied and decreased in the order: base saturation, H + Al, pH, Ca and Mg concentrations. Optimum values of selected soil chemical properties were defined for maximum shoot dry matter; these values can serve as a guideline for alfalfa liming to improve the yield of this forage on acid soils.

A randomized trial of spiritual assessment of outpatients with schizophrenia: Patients' and clinicians' experience

Objective: Recovery-oriented care for patients with schizophrenia involves consideration of cultural issues, such as religion and spirituality. However, there is evidence that psychiatrists rarely address such topics. This study examined acceptance of a spiritual assessment by patients and clinicians, suggestions for treatment that arose from the assessment, and patient outcomes-in terms of treatment compliance and satisfaction with care (as measured by treatment alliance). Methods: Outpatients with psychosis were randomly assigned to two groups: an intervention group that received traditional treatment and a religious and spiritual assessment (N=40) and a control group that received only traditional treatment (N=38). Eight psychiatrists were trained to administer the assessment to their established and stable patients. After each administration, the psychiatrist attended a supervision session with a psychiatrist and a psychologist of religion. Baseline and three-month data were collected. Results: The spiritual assessment was well accepted by patients. During supervision, psychiatrists reported potential clinical uses for the assessment information for 67% of patients. No between-group differences in medication adherence and satisfaction with care were found at three months, although patients in the in- tervention group had significantly better appointment attendance dur- ing the follow-up period. Their interest in discussing religion and spirituality with their psychiatrists remained high. The process was not as well accepted by psychiatrists. Conclusions: Spiritual assessment can raise important clinical issues in the treatment of patients with chronic schizophrenia. Cultural factors, such as religion and spirituality, should be considered early in clinical training, because many clinicians are not at ease addressing such topics with patients.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Harmonization ofsignificant environmental aspects and their risk assessment in UPM paper and pulp mills

Työn tavoite onharmonisoida yhtenäiset rakenteet UPM:n paperi- ja sellutehtaiden merkittävilleympäristönäkökohdille sekä niiden ympäristöriskienhallintajärjestelmille. Näin saavutetaan yhteneväiset tavoitteet ja analysointikeinot yrityksen yksiköille. Harmonisointiprosessi on osa koko yrityksen ympäristöhallintajärjestelmän kehittämistä. Ja konsernin EMS -prosessi puolestaan konvergoi konsernin integroidun johtamisjärjestelmän kehitystä. Lisäksi työn tapaustutkimuksessa selvitettiin riskienhallintajärjestelmien integroitumispotentiaalia. Sen avulla saavutettaisiin paremmin suuren yrityksen synergia-etuja ja vuorovaikutteisuutta toimijoiden kesken, sekä parannettaisiin riskienhallintajärjestelmän mukautuvuutta ja käytettävyyttä. Työssä käsitellään kolmea esimerkkiä, joiden pohjalta tehdään esitys harmonisoiduille merkittäville ympäristönäkökohdille sekä riskienhallintajärjestelmien parametreille. Tutkimusongelmaa lähestytään haastattelujen, kirjallisuuden, yrityksen PWC:llä teettämän selvityksen sekä omien päätelmien avulla. Lisäksi työssä esitetään ympäristöhallintajärjestelmän tehokkuuden todentaminen ympäristösuorituskyvyn muuttujiin suhteutettuna. Pohjana jatkuvan kehityksen päämäärälle on organisaatio-oppiminen, niin yksittäisen työntekijän, tiimien kuin eri yksiköiden kesken. Se antaa sysäyksen aineettoman omaisuuden, kuten ympäristö-osaamisen, hyödyntämiseen parhaalla mahdollisella tavalla. Tärkeimpinä lopputuloksina työssä ovat ehdotukset harmonisoiduille merkittäville ympäristönäkökohdille sekä ympäristöriskienhallintajärjestelmän määritetyille komponenteille. Niitä ovat määritelmät ja skaalat riskien todennäköisyydelle, seurauksille sekä riskiluokille. Työn viimeisenä osana luodaan pohja tapaustutkimuksen avulla Rauman tehtaan jätevedenpuhdistamon kahden erilaisen riskienhallintajärjestelmän integroitumiselle.

Technology selection and group decision support systems: Case studies on supporting strategic technology selection processes

The objective of the dissertation is to increase understanding and knowledge in the field where group decision support system (GDSS) and technology selection research overlap in the strategic sense. The purpose is to develop pragmatic, unique and competent management practices and processes for strategic technology assessment and selection from the whole company's point of view. The combination of the GDSS and technology selection is approached from the points of view of the core competence concept, the lead user -method, and different technology types. In this research the aim is to find out how the GDSS contributes to the technology selection process, what aspects should be considered when selecting technologies to be developed or acquired, and what advantages and restrictions the GDSS has in the selection processes. These research objectives are discussed on the basis of experiences and findings in real life selection meetings. The research has been mainly carried outwith constructive, case study research methods. The study contributes novel ideas to the present knowledge and prior literature on the GDSS and technology selection arena. Academic and pragmatic research has been conducted in four areas: 1) the potential benefits of the group support system with the lead user -method,where the need assessment process is positioned as information gathering for the selection of wireless technology development projects; 2) integrated technology selection and core competencies management processes both in theory and in practice; 3) potential benefits of the group decision support system in the technology selection processes of different technology types; and 4) linkages between technology selection and R&D project selection in innovative product development networks. New type of knowledge and understanding has been created on the practical utilization of the GDSS in technology selection decisions. The study demonstrates that technology selection requires close cooperation between differentdepartments, functions, and strategic business units in order to gather the best knowledge for the decision making. The GDSS is proved to be an effective way to promote communication and co-operation between the selectors. The constructs developed in this study have been tested in many industry fields, for example in information and communication, forest, telecommunication, metal, software, and miscellaneous industries, as well as in non-profit organizations. The pragmatic results in these organizations are some of the most relevant proofs that confirm the scientific contribution of the study, according to the principles of the constructive research approach.

Expert clinical reasoning and pain assessment in mechanically ventilated patients: A descriptive study.

BACKGROUND: Pain assessment in mechanically ventilated patients is challenging, because nurses need to decode pain behaviour, interpret pain scores, and make appropriate decisions. This clinical reasoning process is inherent to advanced nursing practice, but is poorly understood. A better understanding of this process could contribute to improved pain assessment and management. OBJECTIVE: This study aimed to describe the indicators that influence expert nurses' clinical reasoning when assessing pain in critically ill nonverbal patients. METHODS: This descriptive observational study was conducted in the adult intensive care unit (ICU) of a tertiary referral hospital in Western Switzerland. A purposive sample of expert nurses, caring for nonverbal ventilated patients who received sedation and analgesia, were invited to participate in the study. Data were collected in "real life" using recorded think-aloud combined with direct non-participant observation and brief interviews. Data were analysed using deductive and inductive content analyses using a theoretical framework related to clinical reasoning and pain. RESULTS: Seven expert nurses with an average of 7.85 (±3.1) years of critical care experience participated in the study. The patients had respiratory distress (n=2), cardiac arrest (n=2), sub-arachnoid bleeding (n=1), and multi-trauma (n=2). A total of 1344 quotes in five categories were identified. Patients' physiological stability was the principal indicator for making decision in relation to pain management. Results also showed that it is a permanent challenge for nurses to discriminate situations requiring sedation from situations requiring analgesia. Expert nurses mainly used working knowledge and patterns to anticipate and prevent pain. CONCLUSIONS: Patient's clinical condition is important for making decision about pain in critically ill nonverbal patients. The concept of pain cannot be assessed in isolation and its assessment should take the patient's clinical stability and sedation into account. Further research is warranted to confirm these results.

Vaccination Competence - The Concept and Evaluation

The purpose of this two-phase study was to define the concept of vaccination competence and assess the vaccination competence of graduating public health nurse students (PHN students) and public health nurses (PHNs) in Finland, with the goal of promoting and maintaining vaccination competence and developing vaccination education. The first phase of the study included semi-structured interviews with vaccination professionals, graduating PHN students and clients (a total of n=40), asking them to describe vaccination competence as well as the factors strengthening and weakening it. The data were analyzed through content analysis. In the second phase of the study, structured instruments were developed, and vaccination competence of PHN students (n=129) in Finland and PHNs (n=405) was assessed using a self-assessment scale (VAS) and taking a knowledge test. PHNs were used as a reference group, enabling us to determine whether a satisfactory level of vaccination competence was achieved by the end of studies, or whether it was gained through work experience vaccinating clients. The data were collected from five polytechnic institutions and seven health centers located in various parts of the country. The data were collected using instruments developed for this study, and were analyzed statistically. In the first phase, based on the results of the interviews, vaccination competence was defined as a large multi-faceted entity, including the concepts of competent vaccinator, competent implementation of the vaccination, and the outcome of the implementation. Semi-structured interviews revealed that factors strengthening and weakening vaccination competence were connected to the vaccinator, the client being vaccinated, the vaccination environment and vaccinator education. On the whole, factors strengthening and weakening vaccination were the opposite of each other. In the second phase, on the self-assessment of vaccination competence, students rated themselves as significantly lower than working professionals. On the knowledge test, the percentage of correct answers was lower for students than PHNs. When all background variables were taken into account in multivariate analysis, there was no longer a significant difference between the students and PHNs on the self-assessment. However, in multivariate analysis, the PHNs still performed better than students on the knowledge test. For this study, a satisfactory level of vaccination competence was defined as a mean of 8.0 on the self-assessment and 80% correct answers on the knowledge test. Based on these criteria, students almost reached the level of satisfactory in their overall self-assessment, and PHNs did. Both groups, however, did rank themselves as satisfactory in some sum variables. On the knowledge test the students did not achieve a level of satisfactory (80%) in their total score, though PHNs did. As before, both groups did achieve a level of satisfactory in several sum variables. Further research and development should focus on vaccination education, the testing of vaccination competence and vaccination practices in clinical practice, as well as on developing the measurement tools.

Assessment of purchasing maturity in spare parts supply chain

To describe the change of purchasing moving from administrative to strategic function academics have put forward maturity models which help practitioners to compare their purchasing activities to industry top performers and best practices. However, none of the models aim to distinguish the purchasing maturity from the after-sales point of view, even though after-sales activities are acknowledged as a relevant source of revenue, profit and competitive advantage in most manufacturing firms. The maturity of purchasing and supply management practices have a large impact to the overall performance of the spare parts supply chain and ultimately to the value creation and relationship building for the end customer. The research was done as a case study for a European after-sales organization which is part of a globally operating industrial firm specialized in heavy machinery. The study mapped the current state of the purchasing practices in the case organization and also distinguished the relevant areas for future development. The study was based on the purchasing maturity model developed by Schiele (2007) and investigated also how applicable is the maturity model in the spare parts supply chain context. Data for the assessment was gathered using five expert interviews inside the case organization and other parties involved in the company’s spare parts supply chain. Inventory management dimension was added to the original maturity model in order to better capture the important areas in a spare parts supply chain. The added five questions were deduced from the spare parts management literature and verified as relevant areas by the case organization’s personnel. Results indicate that largest need for development in the case organization are: better collaboration between sourcing and operative procurement functions, use of installed base information in the spare parts management, training plan development for new buyers, assessment of aligned KPI’s between the supply chain parties and better defining the role of after-sales sourcing. The purchasing maturity model used in this research worked well in H&R Leading, Controlling and Inventory Management dimensions. The assessment was more difficult to conduct in the Supplier related processes, Process integration and Organizational structure –dimensions, mainly because the assessment in these sections would for some parts require more company-wide assessment. Results indicate also that the purchasing maturity model developed by Schiele (2007) captures the relevant areas in the spare parts supply as well.

Best practices of international double degree programmes. Case of Russian and European universities

The purpose of the Master’s thesis research is to study and disseminate the best practices of international double Master’s degree programmes organization, implementation and development. The given research is focused on two main areas: motivation of higher education institutions to start double degree programmes and best practices of double degree programme design and implementation from the perspective of building joint curriculum and organizing balanced mobility and development of existing programmes in terms of increasing their quality and attractiveness. This is a case study of the double degree programmes between Russian and European universities. The study findings reveal good developments in the field of double degree cooperation between Russian and European universities and a high motivation from both parties. The research depicts different models of building a joint curriculum and organizing academic mobility. The following areas could be outlined as development points for double degree programmes: - Personal interest and commitment of organizers of double degree programmes; - Comprehensive agreement between partners on different aspects and practicalities of the double degree programme implementation; - Promotion towards more balanced student participation and two-way mobility; - Foreign language skills improvement for students and university staff; - Joint strategy and actions in marketing and quality assurance; - Involvement of international companies; - Wider usage of e-learning technology.

Assessment of Young Learners’ English Proficiency in Bilingual Content Instruction CLIL

This applied linguistic study in the field of second language acquisition investigated the assessment practices of class teachers as well as the challenges and visions of language assessment in bilingual content instruction (CLIL) at primary level in Finnish basic education. Furthermore, pupils’ and their parents’ perceptions of language assessment and LangPerform computer simulations as an alternative, modern assessment method in CLIL contexts were examined. The study was conducted for descriptive and developmental purposes in three phases: 1) a CLIL assessment survey; 2) simulation 1; and 3) simulation 2. All phases had a varying number of participants. The population of this mixed methods study were CLIL class teachers, their pupils and the pupils’ parents. The sampling was multi-staged and based on probability and random sampling. The data were triangulated. Altogether 42 CLIL class teachers nationwide, 109 pupils from the 3rd, 4th and 5th grade as well as 99 parents from two research schools in South-Western Finland participated in the CLIL assessment survey followed by an audio-recorded theme interview of volunteers (10 teachers, 20 pupils and 7 parents). The simulation experimentations 1 and 2 produced 146 pupil and 39 parental questionnaires as well as video interviews of volunteered pupils. The data were analysed both quantitatively using percentages and numerical frequencies and qualitatively employing thematic content analysis. Based on the data, language assessment in primary CLIL is not an established practice. It largely appears to be infrequent, incidental, implicit and based on impressions rather than evidence or the curriculum. The most used assessment methods were teacher observation, bilingual tests and dialogic interaction, and the least used were portfolios, simulations and peer assessment. Although language assessment was generally perceived as important by teachers, a fifth of them did not gather assessment information systematically, and 38% scarcely gave linguistic feedback to pupils. Both pupils and parents wished to receive more information on CLIL language issues; 91% of pupils claimed to receive feedback rarely or occasionally, and 63% of them wished to get more information on their linguistic coping in CLIL subjects. Of the parents, 76% wished to receive more information on the English proficiency of their children and their linguistic development. This may be a response to indirect feedback practices identified in this study. There are several challenges related to assessment; the most notable is the lack of a CLIL curriculum, language objectives and common ground principles of assessment. Three diverse approaches to language in CLIL that appear to affect teachers’ views on language assessment were identified: instrumental (language as a tool), dual (language as a tool and object of learning) and eclectic (miscellaneous views, e.g. affective factors prioritised). LangPerform computer simulations seem to be perceived as an appropriate alternative assessment method in CLIL. It is strongly recommended that the fundamentals for assessment (curricula and language objectives) and a mutual assessment scheme should be determined and stakeholders’ knowledge base of CLIL strengthened. The principles of adequate assessment in primary CLIL are identified as well as several appropriate assessment methods suggested.

Toward a-state-of-the-art IR copyright management system: a needs assessment

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Digital Preservation Tools, Practices, and Policies in Islandora

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Conceptualizing and counteracting the bullying dynamic: Classroom and school contexts matter

Guided by the social-ecological conceptualization of bullying, this thesis examines the implications of classroom and school contexts—that is, students’ shared microsystems—for peer-to-peer bullying and antibullying practices. Included are four original publications, three of which are empirical studies utilizing data from a large Finnish sample of students in the upper grade levels of elementary school. Both self- and peer reports of bullying and victimization are utilized, and the hierarchical nature of the data collected from students nested within school ecologies is accounted for by multilevel modeling techniques. The first objective of the thesis is to simultaneously examine risk factors for victimization at individual, classroom, and school levels (Study I). The second objective is to uncover the individual- and classroom-level working mechanisms of the KiVa antibullying program which has been shown to be effective in reducing bullying problems in Finnish schools (Study II). Thirdly, an overview of the extant literature on classroom- and school-level contributions to bullying and victimization is provided (Study III). Finally, attention is paid to the assessment of victimization and, more specifically, to how the classroom context influences the concordance between self- and peer reports of victimization (Study IV). Findings demonstrate the multiple ways in which contextual factors, and importantly students’ perceptions thereof, contribute to the bullying dynamic and efforts to counteract it. Whereas certain popular beliefs regarding the implications of classroom and school contexts do not receive support, the role of peer contextual factors and the significance of students’ perceptions of teachers’ attitudes toward bullying are highlighted. Directions for future research and school-based antibullying practices are suggested.