Stratégies pédagogiques et leur effet sur la motivation et l’engagement des étudiants en sciences au collégial

Résumé : Cette recherche descriptive a pour origine une question de praticienne-chercheure : Quels sont les stratégies et les actes pédagogiques à privilégier par un enseignant en sciences au collégial, afin de stimuler la motivation des étudiants à s’engager dans leurs activités d’apprentissage? Les enjeux pédagogiques au niveau collégial sont d’importance. Les études scientifiques sont caractérisées par un grand nombre d’abandons, un faible niveau de motivation et d’engagement des étudiants dans leurs études et un taux de réussite sous les seuils visés. L’enseignant peut jouer un rôle-clef pour stimuler l’engagement des étudiants, tant par ses stratégies pédagogiques ou ses choix d’activité d’apprentissage que par le support qu’il peut apporter à l’apprenant. La particularité du milieu collégial, où se côtoient formation pré-universitaire et formation technique, n’a pas encore été étudiée, dans une perspective comparative sur la dynamique motivationnelle, en lien avec l’engagement dans une formation scientifique. L’objectif général de cette recherche est de décrire les perceptions des étudiants quant à leur motivation, selon différents actes et stratégies pédagogiques mis en place par les enseignants de deux programmes scientifiques au niveau collégial, soit le programme pré-universitaire Sciences de la nature et pour le programme Techniques de laboratoire, profil Biotechnologies. Chacun des 16 enseignants participants de biologie ou de physique des deux programmes ont été observés durant une ou deux séances de cours totalisant 58 heures d’enseignement, pour 29 groupes d’étudiants, de façon à identifier la stratégie pédagogique générale de la séance et les actes pédagogiques qui ont été concrétisés en classe. Les étudiants ont ensuite complété un questionnaire en ligne sur leurs perceptions en lien avec la motivation concernant ces stratégies et actes pédagogiques. Les questionnaires de 272 répondants ont été traité, analysés et interprétés, de façon à dresser un portrait de la dynamique motivationnelle par groupes de comparaison, par analyses statistiques et analyse qualitative des commentaires spontanés des répondants. Les étudiantes et étudiants de Biotechnologies ont des perceptions plus favorables à la motivation en accordant plus de valeur aux activités d’apprentissage que les répondants de Sciences de la nature. Ils ont également un désir d’engagement plus élevé. Les hommes de Biotechnologies se sentent significativement plus compétents que les femmes du même programme et les répondants des deux genres en Sciences de la nature, ils ont une plus grande facilité à participer aux activités d’apprentissage en classe et ne mentionnent que très peu d’émotions négatives en lien avec les activités de leurs séances de cours. Les étudiantes et étudiants des deux programmes ont des perceptions très diversifiées sur les activités d’apprentissage et stratégies pédagogiques; elles sont même opposées entre certains étudiants pour une même séance de cours, ce qui indique que d’offrir une bonne variété d’actes pédagogiques à chaque séance de cours est à privilégier pour stimuler la motivation du plus grand nombre.

Development of a hydrogel construct to prevent endoleaks occurrence following endovascular abdominal aortic aneurysm repair

Abdominal aortic aneurysm is the pathological dilation of the abdominal tract of the aorta and, if left untreated, could undergo rupture with a mortality rate of up to 90%. EVAR is the most common method for AAA treatment consisting in the internal coverage of the aorta with a metallic stent to isolate the aneurysmatic segment from the systemic circulation. Although EVAR technical success rate is high, reinterventions are common. Among the causes of reinterventions typeII endoleaks are the most frequent and consist in retrograde blood flow into the aneurysmal sac from collateral aortic branches. Continued perfusion of the aneurysm sac may lead to aneurysm rupture, therefore AAA sac embolization is performed using metallic coils. However, the presence of artifacts caused by the presence of metallic coils is a limitation because they are radiopaque and can hamper the endoleak during imaging follow-up. This study is aimed at developing a biocompatible hydrogel that could be injected into the aneurysmal sac and may allow a selective intraprocedural sac embolization to reduce post procedural typeII endoleak and eventual AAA rupture. P(BT75BSI25) was synthesized by polycondensation and its biocompatibility tested to assess whether the polymers had no toxic effects. HUVEC cell line was used to mimic the environment in which the polymer would be in contact with, PBS was used as a positive control and MTT assay was performed to evaluate cellular viability after being in contact with the hydrogel. MTT assay showed no significant difference between PBS and P(BT75BSI25), thus the polymer is biocompatible, as confirmed by the analysis of apoptosis by flow cytometry. An aromatic copolymer was obtained via polycondensation and was found to be biocompatible in contact with endothelial cells. This suggests that the hydrogel could be potentially used in the clinical setting for the treatment of type II endoleak after EVAR.

Robotic Manipulation of DLOs for Wiring Harness Assembly: a Machine Learning Approach

In recent times, a significant research effort has been focused on how deformable linear objects (DLOs) can be manipulated for real world applications such as assembly of wiring harnesses for the automotive and aerospace sector. This represents an open topic because of the difficulties in modelling accurately the behaviour of these objects and simulate a task involving their manipulation, considering a variety of different scenarios. These problems have led to the development of data-driven techniques in which machine learning techniques are exploited to obtain reliable solutions. However, this approach makes the solution difficult to be extended, since the learning must be replicated almost from scratch as the scenario changes. It follows that some model-based methodology must be introduced to generalize the results and reduce the training effort accordingly. The objective of this thesis is to develop a solution for the DLOs manipulation to assemble a wiring harness for the automotive sector based on adaptation of a base trajectory set by means of reinforcement learning methods. The idea is to create a trajectory planning software capable of solving the proposed task, reducing where possible the learning time, which is done in real time, but at the same time presenting suitable performance and reliability. The solution has been implemented on a collaborative 7-DOFs Panda robot at the Laboratory of Automation and Robotics of the University of Bologna. Experimental results are reported showing how the robot is capable of optimizing the manipulation of the DLOs gaining experience along the task repetition, but showing at the same time a high success rate from the very beginning of the learning phase.

SynBA: A contextualized Synonim-Based adversarial Attack for text classification

With the advent of high-performance computing devices, deep neural networks have gained a lot of popularity in solving many Natural Language Processing tasks. However, they are also vulnerable to adversarial attacks, which are able to modify the input text in order to mislead the target model. Adversarial attacks are a serious threat to the security of deep neural networks, and they can be used to craft adversarial examples that steer the model towards a wrong decision. In this dissertation, we propose SynBA, a novel contextualized synonym-based adversarial attack for text classification. SynBA is based on the idea of replacing words in the input text with their synonyms, which are selected according to the context of the sentence. We show that SynBA successfully generates adversarial examples that are able to fool the target model with a high success rate. We demonstrate three advantages of this proposed approach: (1) effective - it outperforms state-of-the-art attacks by semantic similarity and perturbation rate, (2) utility-preserving - it preserves semantic content, grammaticality, and correct types classified by humans, and (3) efficient - it performs attacks faster than other methods.

Ecological status of mesophotic biogenic reefs off Chioggia

This study investigated the coralligenous reefs' benthic assemblages at 6 sites off Chioggia, in the northern Adriatic Sea, comparing 2 different methods of analysis of photographic samples: the grid method (overlapping a grid of 400 cells) and the random point method (random distribution of 100 points on the photo). For the first method, taxonomic recognition and the percentage coverage estimations were performed manually using photoQuad software. In the second, CoralNet semi-automated web-based annotation system was applied. This allows for assisted and supervised identification, the success rate of which gradually improves after initial software training. The results obtained with the two methods of analysing photographic samples are slightly different. The random points method gives lower species richness values and some differences in coverage estimations; all of this is reflected in the calculation of the biotic index. NAMBER values are significantly lower with the random points method and provide locally different classifications (3 out of 6 sites). However, the results obtained with the two methods are closely related to each other and depict a similar spatial trend. These results rise caution in applying different, albeit similar, methods in the analysis of benthic assemblages aimed to environmental quality assessment.

A pilot study to evaluate the success and survival rate of titanium-zirconium implants in partially edentulous patients: results after 24 months of follow-up

Implants made from a new titanium-zirconium (TiZr) alloy (Roxolid) have shown good osseointegration with no adverse effects in animal studies. This single-cohort pilot study was performed to evaluate the performance and safe use of reduced-diameter implants made from this new TiZr alloy for the first time in human subjects, in a prospective case-controlled series.

Influence of spawning procedure on gametes fertilization success in Salminus hilarii Valenciennes, 1850 (Teleostei: Characidae): Implications for the conservation of this species

Artificial reproduction and gamete fertilization were evaluated in Salminus hilarii wild and domesticated broodstocks. Wild and domesticated broodstocks were artificially induced to reproduction using a carp pituitary treatment. Four groups were considered: Group 1 (G1), fish caught in the wild maintained for three years in the same conditions as the domesticated broodstocks and spawned naturally; Group 2 (G2), broodstock born and raised in captivity and spawned naturally; Group 3 (G3), wild broodstocks, which were manually stripped for gamete collection and dry fertilization; and Group 4 (G4), domesticated males and females, also manually stripped. Oocytes, eggs, and larvae were sampled at different time intervals throughout embryonic development. Yolk sac absorption occurred approximately 24-29 h after hatching. Twenty-six h after hatching, the larvae mouths opened. Cannibalism was identified just 28-30 h after hatching. There was no morphological difference in embryonic development among all groups. The number of released eggs per gram of female was: G1: 83.3 ± 24.5 and G2: 103.8 ± 37.4; however, the fertilization success was lower in G2 (42.0 ± 6.37 %) compared with G1 (54.7 ± 3.02%) (P = 0.011). Hand-stripping of oocytes was not successful and the fertilization rate was zero. The reproduction of this species in captivity is viable, but it is necessary to improve broodstock management to enhance fertilization rates and obtain better fingerling production for restocking programs.

Prospective randomized comparison of human oocyte cryopreservation with slow-rate freezing or vitrification

Objective: To compare cryopreservation of mature human oocytes with slow-rate freezing and vitrification and determine which is most efficient at establishing a pregnancy. Design: Prospective randomized. Setting: Academically affiliated, private fertility center. Patient(s): Consenting patients with concerns about embryo cryopreservation and more than nine mature oocytes at retrieval were randomized to slow-rate freezing or vitrification of supernumerary (more than nine) oocytes. Intervention(s): Oocytes were frozen or vitrified, and upon request oocytes were thawed or warmed, respectively. Main Outcome Measure(s): Oocyte survival, fertilization, embryo development, and clinical pregnancy. Result(s): Patient use has resulted in 30 thaws and 48 warmings. Women`s age at time of cryopreservation was similar. Oocyte survival was significantly higher following vitrification/warming (81%) compared with freezing/thawing (67%). Fertilization was more successful in oocytes vitrified/warmed compared with frozen/thawed. Fertilized oocytes from vitrification/warming had significantly better cleavage rates (84%) compared with freezing/thawing (71%) and resulted in embryos with significantly better morphology. Although similar numbers of embryos were transferred, embryos resulting from vitrified oocytes had significantly enhanced clinical (38%) pregnancy rates compared with embryos resulting from frozen oocyte (13%). Miscarriage and/or spontaneous abortion rates were similar. Conclusion(s): Our results suggest that vitrification/warming is currently the most efficient means of oocyte cryopreservation in relation to subsequent success in establishing pregnancy. (Fertil Steril (R) 2010; 94: 2088-95. (C) 2010 by American Society for Reproductive Medicine.)

Homograph ambiguity resolution in front-end design for portuguese TTS systems

In this paper, a module for homograph disambiguation in Portuguese Text-to-Speech (TTS) is proposed. This module works with a part-of-speech (POS) parser, used to disambiguate homographs that belong to different parts-of-speech, and a semantic analyzer, used to disambiguate homographs which belong to the same part-of-speech. The proposed algorithms are meant to solve a significant part of homograph ambiguity in European Portuguese (EP) (106 homograph pairs so far). This system is ready to be integrated in a Letter-to-Sound (LTS) converter. The algorithms were trained and tested with different corpora. The obtained experimental results gave rise to 97.8% of accuracy rate. This methodology is also valid for Brazilian Portuguese (BP), since 95 homographs pairs are exactly the same as in EP. A comparison with a probabilistic approach was also done and results were discussed.

Exchange rate forecasters’ performance: evidence of skill?

This paper sheds new light on a long-standing puzzle in the international finance literature, namely, that exchange rate expectations appear inaccurate and even irrational. We find for a comprehensive dataset that individual forecasters’ performance is skill-based. ‘Superior’ forecasters show consistent ability as their forecasting success holds across currencies. They seem to possess knowledge on the role of fundamentals in explaining exchange rate behavior, as indicated by better interest rate forecasts. Superior forecasters are more experienced than the median forecaster and have fewer personnel responsibilities. Accordingly, foreign exchange markets may function in less puzzling and irrational ways than is often thought.

In-situ revascularisation for secondary aorto-enteric fistulae: the success of silver-coated Dacron is closely linked to a suitable bowel repair.

OBJECTIVES: The purpose of this study was to assess short- and mid-term results of in-situ revascularisation (ISR) using silver-coated Dacron prostheses and bowel repair for management of secondary aorto-enteric fistulae (SAEF). DESIGN: Single-centre retrospective chart review. MATERIAL AND METHODS: This study includes all the patients treated by ISR using silver-coated Dacron for SAEF between 2006 and 2010. Primary end points were mortality and survival rates. Secondary end points were reinfection-free survival and secondary patency rates. RESULTS: Eighteen male patients with SAEF with a median age of 64 years were operated by ISR using silver-coated Dacron during the study period without operative death. The 30-day mortality was 22% and the in-hospital mortality rate was 39%. Indeed, during hospitalisation, a duodenal leak was observed in four patients including three who died. Four others patients died due to multi-system organ failure. Median follow-up was 16 months (range 1-66). The survival rate at 12 months was 55%. One duodenal leak was observed leading to death. The reinfection-free survival and the secondary patency rates at 12 months were 60% and 89%, respectively. CONCLUSION: In-situ revascularisation with silver-coated Dacron provides acceptable results in terms of mortality. This treatment may be useful for simple vascular reconstruction and allow greater attention to bowel repair that is a determinant in short- and mid-term survival.

What is the most relevant standard of success in assisted reproduction?: The cumulated singleton/twin delivery rates per oocyte pick-up: the CUSIDERA and CUTWIDERA.

National and international registries are essential tools for establishing new standards and comparing success rates, but they do not take into account the total pregnancy/delivery rate per oocyte recovery. In Switzerland and Germany, because of legal constraints, a maximum of three two-pronuclear zygotes are allocated for transfer whereas all the supernumerary pronuclear zygotes are immediately cryopreserved, preventing selection of the transferred embryos. We report on a 10 years' experience (1993-2002) of our centre which performs transfers of unselected embryos and cryopreservation at the two-pronuclear zygote stage. As approximately 30% of all deliveries are from cryo cycles, it is essential to take into account the contribution of the cryo transfers, and we propose therefore to evaluate, as a measure of IVF performance, the cumulated delivery rate per oocyte pick-up. This delivery rate is broken down further into the cumulated singleton delivery rate (CUSIDERA) and the cumulated twin delivery rate (CUTWIDERA). The sum (S) of these two rates is a measure of efficacy while the ratio CUTWIDERA/S as a percentage is a measure of safety of IVF treatments. Using these new indexes, the average 10 year efficacy and safety of our IVF programme were 26 and 19%, respectively. Both CUSIDERA and CUTWIDERA can be calculated easily in any clinical situation and yield useful parameters for patient counselling and internal/external benchmarking purposes.

The Cornella Health Interview Survey Follow-Up (CHIS.FU) Study: design, methods, and response rate

Background: The aim of this report is to describe the main characteristics of the design, including response rates, of the Cornella Health Interview Survey Follow-up Study. Methods: The original cohort consisted of 2,500 subjects (1,263 women and 1,237 men) interviewed as part of the 1994 Cornella Health Interview Study. A record linkage to update the address and vital status of the cohort members was carried out using, first a deterministic method, and secondly a probabilistic one, based on each subject's first name and surnames. Subsequently, we attempted to locate the cohort members to conduct the phone follow-up interviews. A pilot study was carried out to test the overall feasibility and to modify some procedures before the field work began. Results: After record linkage, 2,468 (98.7%) subjects were successfully traced. Of these, 91 (3.6%) were deceased, 259 (10.3%) had moved to other towns, and 50 (2.0%) had neither renewed their last municipal census documents nor declared having moved. After using different strategies to track and to retain cohort members, we traced 92% of the CHIS participants. From them, 1,605 subjects answered the follow-up questionnaire. Conclusion: The computerized record linkage maximized the success of the follow-up that was carried out 7 years after the baseline interview. The pilot study was useful to increase the efficiency in tracing and interviewing the respondents.

Excess Entry, Ambiguity Seeking, and Competence: An Experimental Investigation

Excess entry refers to the high failure rate of new entrepreneurial ventures. Economic explanations suggest 'hit and run' entrants and risk-seeking behavior. A psychological explanation is that people (entrepreneurs) are overconfident in their abilities (Camerer & Lovallo, 1999). Characterizing entry decisions as ambiguous gambles, we alternatively suggest following Heath and Tversky (1991) that people seek ambiguity when the source of uncertainty is related to their competence. Overconfidence, as such, plays no role. This hypothesis is confirmed in an experimental study that also documents the phenomenon of reference group neglect. Finally, we emphasize the utility that people gain from engaging in activities that contribute to a sense of competence. This is an important force in economic activity that deserves more explicit attention.

Entrepreneurial success and failure: Confidence and fallible judgement

Excess entry or the high failure rate of market-entry decisions is often attributed tooverconfidence exhibited by entreprene urs. We show analytically that whereas excess entryis an inevitable consequence of imperfect assessments of entrepreneurial skill, it does notimply overconfidence. Judgmental fallibility leads to excess entry even when everyone isunderconfident. Self-selection implies greater confidence (but not necessarilyoverconfidence) among those who start new businesses than those who do not and amongsuccessful entrants than failures. Our results question claims that entrepreneurs areoverconfident and emphasize the need to understand the role of judgmental fallibility inproducing economic outcomes.