Evaluation of online tools as didactic resource in the university education

Recently, many efforts have been made in the academic world to adapt the new degrees to the new European Higher Education Area (EHEA). New technologies have been the most important factor to carry out this adaptation. In particular, the tools 2.0 have been spreading quickly, not just the Web 2.0, but even in all the educational levels. Nevertheless, it is now necessary to evaluate whether all these efforts and all the changes, carried out in order to obtain improved academic performance among students, have provided good results. Therefore, the aim of this paper is focused on studying the impact of the implementation of information and communication technologies (ICTs) in a subject belonging to a Master from the University of Alicante in the academic year (2010-2011). In special, it is an elective course called "Advanced Visual Ergonomics" from the Master of Clinical Optometry and Vision. The methodology used to teach this course differs from the traditional one in many respects. For example, one of the resources used for the development of this course is a blog developed specifically to coordinate a series of virtual works, whose purpose is that the student goes into specific aspects of the current topic. Next, the student participates in an active role by writing a personal assessment on the blog. However, in the course planning, there is an attendance to lessons, where the teacher presents certain issues in a more traditional way, that is, with a lecture supported with audiovisual materials, such as materials generated in powerpoint. To evaluate the quality of the results achieved with this methodology, in this work the personal assessment of the students, who have completed this course during this academic year, are collected. In particular, we want to know their opinion about the used resources, as well as the followed methodology. The tool used to collect this information was a questionnaire. This questionnaire evaluates different aspects of the course: a general opinion, quality of the received information, satisfaction about the followed methodology and the student´s critical awareness. The design of this questionnaire is very important to get conclusive information about the methodology followed in the course. The questionnaire has to have an adequate number of questions; whether it has many questions, it might be boring for the student who would pay no enough attention. The questions should be well-written, with a clear structure and message, to avoid confusion and an ambiguity. The questions should be objectives, without any suggestion for a desired answer. In addition, the questionnaire should be interesting to encourage the student´ s interest. In conclusion, this questionnaire developed for this subject provided good information to evaluate whether the methodology was a useful tool to teach "Advanced Visual Ergonomics". Furthermore, the student´s opinion collected by this questionnaire might be very helpful to improve this didactic resource.

Implementación de espirales de conocimiento y liderazgo situacional en la metodología b-learning

Comunicación presentada en las X Jornadas de Redes de Investigación en Docencia Universitaria, Alicante, 16-17 junio 2012.

Los libros de texto de química destinados a estudiantes de medicina y cirugía en España (1788-1845)

Este trabajo forma parte de en un proyecto de investigación sobre la farmacología en la sociedad española del siglo XIX, en particular, acerca del papel de las prácticas y los conocimientos químicos en la transición de la materia médica a la farmacología experimental. Dentro de ese esquema general, el objeto de este artículo es el estudio de los libros de texto destinados a los estudiantes de medicina y de cirugía durante los años finales del siglo XVIII y la primera mitad del siglo XIX. Se trata de establecer las coordenadas institucionales generales dentro de las cuales fueron escritas, publicadas y leídas estas obras. El estudio arranca en 1788, fecha alrededor de la cual aparecieron numerosos libros de texto de química, entre los que figuran varias traducciones francesas y el «Curso de química» de Pedro Gutiérrez Bueno. Tras señalar la importancia de las obras de Antoine Fourcroy, se estudia la polémica acerca de las aplicaciones de la química en medicina a través de un texto de Juan Manuel de Aréjula. A continuación, se describen las principales instituciones de enseñanza de la medicina y la cirugía en las que se impartieron clases de química, con especial atención a los programas y a los libros que se publicaron para estas clases. El artículo finaliza en 1845, fecha de la reforma de planes de estudios de José Pidal.

Pedro Gutiérrez Bueno (1745-1822), los libros de texto y los nuevos públicos de la química en el último tercio del siglo XVIII

El presente trabajo se enmarca en un proyecto de investigación acerca del papel de las prácticas y los conocimientos químicos en la transición de la materia médica a la farmacología experimental. Dentro de ese esquema general, el objeto de este artículo es el estudio de los libros de texto destinados a los estudiantes de medicina y de cirugía durante los años finales del siglo XVIII y la primera mitad del siglo XIX. En un estudio anterior, publicado en esta revista nos ocupamos de establecer las coordenadas institucionales generales dentro de las cuales fueron escritas, publicadas y leídas estas obras. Este trabajo es una continuación del anterior y está dedicado al análisis del «Curso de química» de Pedro Gutiérrez Bueno. A través de esta obra, se intenta ofrecer nuevos datos sobre los nuevos públicos de la química a finales del siglo XVIII y su influencia en la estructura y contenidos de los nuevos libros de texto.

Mechanical, thermal and colorimetric properties of LLDPE coloured with a blue nanopigment and conventional blue pigments

Purpose – This research deals with a new kind of nanopigment, obtained from the combination of organic dyes and layered nanoclays, that the authors call nanoclay-colorant pigment (NCP). Whilst they have already been employed in inks and coatings, to date these nanopigments have not been used as pigments for polymers. The existing lack of knowledge surrounding them must be redressed in order to bridge the gap between current academic studies and commercial exploitation. Therefore, the main purpose of this paper is to examine the hitherto unknown aspects of the NCP, which relate specifically to their applicability as a new type of colorant for polymers. Design/methodology/approach – A blue NCP has been prepared at the laboratory according to the patented method of synthesis (patent WO0104216), using methylene blue and montmorillonite nanoclay. It has then been applied to a thermoplastic polymer (linear low-density polyethylene – LLDPE) to obtain a coloured sample. Furthermore, samples with the same polymer but using conventional blue colorants have been prepared under the same processing conditions. The mechanical, thermal and colorimetric properties of these materials have been compared. Findings – The thermal stability of the sample coloured with NCP is reduced to some extent, while the mechanical strength is slightly increased. Moreover, this sample has better colour performance than the conventionally pigmented samples. Originality/value – In this paper, a blue NCP has been synthesised and successfully employed with polyethylene and the obtained sample shows better colour performance than polyethylene with conventional pigments.

Clinical validation of an algorithm to correct the error in the keratometric estimation of corneal power for normal eyes

To validate clinically an algorithm for correcting the error in the keratometric estimation of corneal power by using a variable keratometric index of refraction (nk) in a normal healthy population.

Implantación progresiva de las titulaciones de Telecomunicación en la Universidad de Alicante

El ritmo vertiginoso al que está evolucionando el sector de las telecomunicaciones a nivel mundial, así como las posibilidades que ofrecen los actuales sistemas de comunicación, las nuevas tecnologías de la información y la implantación de las mismas en los hábitos de vida de la sociedad en general, han convertido a las titulaciones de telecomunicaciones en unos estudios con una alta demanda por parte del alumnado y con unas interesantes perspectivas de futuro gracias al amplio abanico de posibilidades que abarcan. En la Universidad de Alicante comenzaron a impartirse estudios de telecomunicación en el año 1999 con la implantación de la Ingeniería Técnica de Telecomunicación, especialidad en Sonido e Imagen. Con la adaptación al EEES, los estudios se adaptaron en el año 2011 con el comienzo del Grado en Ingeniería en Sonido e Imagen en Telecomunicación, así como con el curso específico de Adaptación al Grado en Ingeniería en Sonido e Imagen en Telecomunicación que establece el puente que permite a nuestros propios titulados (entre otros) adaptar su titulación a los nuevos estudios actuales. A fecha de hoy, la Universidad de Alicante ha dado un paso más, impartiendo desde este curso 2011-2012 el Máster Universitario en Ingeniería de Telecomunicación y permitiendo a los estudiantes completar su formación en Telecomunicaciones en su propia universidad.

Analysis of fixational eye micromovements through pupil tracking

Póster presentado en OPTYKA Optical Fair 2012, Poznan, Polonia, 9-10 noviembre 2012.

Resolution limits to object tracking with subpixel accuracy

Subpixel methods increase the accuracy and efficiency of image detectors, processing units, and algorithms and provide very cost-effective systems for object tracking. Published methods achieve resolution increases up to three orders of magnitude. In this Letter, we demonstrate that this limit can be theoretically improved by several orders of magnitude, permitting micropixel and submicropixel accuracies. The necessary condition for movement detection is that one single pixel changes its status. We show that an appropriate target design increases the probability of a pixel change for arbitrarily small shifts, thus increasing the detection accuracy of a tracking system. The proposal does not impose severe restriction on the target nor on the sensor, thus allowing easy experimental implementation.

Software T-Conic

Al descomprimir el archivo *.zip se tendrán dos archivos. Un manual (*.pdf), con las instrucciones de instalación y uso del programa, y un ejecutable (*.exe)

Spectral BRDF-based determination of proper measurement geometries to characterize color shift of special effect coatings

A reduced set of measurement geometries allows the spectral reflectance of special effect coatings to be predicted for any other geometry. A physical model based on flake-related parameters has been used to determine nonredundant measurement geometries for the complete description of the spectral bidirectional reflectance distribution function (BRDF). The analysis of experimental spectral BRDF was carried out by means of principal component analysis. From this analysis, a set of nine measurement geometries was proposed to characterize special effect coatings. It was shown that, for two different special effect coatings, these geometries provide a good prediction of their complete color shift.

Open-access operating algorithms for commercial videokeratographer and improvement of corneal sampling

We present an algorithm to process images of reflected Placido rings captured by a commercial videokeratoscope. Raw data are obtained with no Cartesian-to-polar-coordinate conversion, thus avoiding interpolation and associated numerical artifacts. The method provides a characteristic equation for the device and is able to process around 6 times more corneal data than the commercial software. Our proposal allows complete control over the whole process from the capture of corneal images until the computation of curvature radii.

Retinal image quality assessment through a visual similarity index

Retinal image quality is commonly analyzed through parameters inherited from instrumental optics. These parameters are defined for ‘good optics’ so they are hard to translate into visual quality metrics. Instead of using point or artificial functions, we propose a quality index that takes into account properties of natural images. These images usually show strong local correlations that help to interpret the image. Our aim is to derive an objective index that quantifies the quality of vision by taking into account the local structure of the scene, instead of focusing on a particular aberration. As we show, this index highly correlates with visual acuity and allows inter-comparison of natural images around the retina. The usefulness of the index is proven through the analysis of real eyes before and after undergoing corneal surgery, which usually are hard to analyze with standard metrics.

Image processing for safety assessment in Civil Engineering

Behaviour analysis of construction safety systems is of fundamental importance to avoid accidental injuries. Traditionally, measurements of dynamic actions in Civil Engineering have been done through accelerometers, but high-speed cameras and image processing techniques can play an important role in this area. Here, we propose using morphological image filtering and Hough transform on high-speed video sequence as tools for dynamic measurements on that field. The presented method is applied to obtain the trajectory and acceleration of a cylindrical ballast falling from a building and trapped by a thread net. Results show that safety recommendations given in construction codes can be potentially dangerous for workers.