Successful establishment of MEKC with electrochemiluminescence detection based on one functionalized ionic liquid

Herein, one water-soluble functionalized ionic liquid, 1-butyl-3-methylimidazolium dodecyl sulfate ([BMIm(+)][C12H25SO4-]), was designed and its superiorities either used as supporting electrolytes or as additives for successful establishment of MEKC with electrochemiluminescence (ECL) detection (MEKC-ECL) method were investigated. Compared with the common supporting electrolytes such as phosphate solution, 1-butyl-3-methylimidazolium dodecyl sulfate solution used as running buffers led to greatly enhanced ECL intensities and column efficiencies for negative targets, a little increase for neutral-charge ones while maintained nearly unchanged for positive ones due to the electrostatic forces between the large cation BMIm(+) and the solutes and the hydrophobic interactions resulting from the large anion C12H25SO4.

From Tunneling to Hopping: A Comprehensive Investigation of Charge Transport Mechanism in Molecular Junctions Based on Oligo(p-phenylene ethynylene)s

The charge transport mechanism of oligo(p-phenylene ethynylene)s with lengths ranging from 0.98 to 5.11 nm was investigated using modified scanning tunneling microscopy break junction and conducting probe atomic force microscopy methods. The methods were based on observing the length dependence of molecular resistance at single molecule level and the current-voltage characteristics in a wide length distribution. An intrinsic transition from tunneling to hopping charge transport mechanism was observed near 2.75 nm. A new transitional zone was observed in the long length molecular wires compared to short ones. This was not a simple transition between direct tunneling and field emission, which may provide new insights into transport mechanism investigations. Theoretical calculations provided an essential explanation for these phenomena in terms of molecular electronic structures.

Electrochemical detector based on sol-gel-derived carbon composite material for capillary electrophoresis microchips

An on-chip disk electrode based on sol-gel-derived carbon composite material could be easily and reproducibly fabricated. Unlike other carbon-based electrodes reported previously, this detector is rigid, convenient to fabricate, and amenable to chemical modifications. Based on the stable and reproducible characters of this detector, a copper particle-modified detector was developed for the detection of carbohydrates which extends the application of the carbon-based electrode. In our experiments, the performance of the new integrated detector for rapid on-chip measurement of epinephrine and glucose was illustrated. Experimental procedures including the fabrication of this detector, the configuration of separation channel outlet and electrode verge, and the performance characteristics of this new electrochemical detector were investigated.

Determination of benzhexol hydrochloride by capillary zone electrophoresis with an end-column electrochemiluminescence detection

A capillary zone electrophoresis with end-column electrochemiluminescence (ECL) detector was described for the determination of benzhexol hydrochloride. The detection was based on the tris(2,2'-bypyridine)ruthenium(II) [Ru(bpy)(3)(2+)] ECL reaction with the analyte. Electrophoresis was performed using a 25 mum i.d. uncoated capillary. 10 mM sodium phosphate buffer (pH=8.0) was used as the running buffer. The solution in the detection cell was 80 mM sodium phosphate (pH=8.0) and 5 mM)21 Ru(bpy)(3)(2+). A linear calibration curve of three-orders of magnitude was obtained (with a correlation coefficient of > 0.999) from 1.0X10(-8) to 1.0X10(-5) M and the limit of detection was 6.7 X 10(-9) M (S/N= 3). This just provides an easy and sensitive method to determine the active ingredient in pharmaceutical formulations.

Microchip capillary electrophoresis with an integrated indium tin oxide electrode-based electrochemiluminescence detector

This paper describes an indium tin oxide (ITO) electrode-based Ru(bPY)(3)(2+) electrochemiluminecence (ECL) detector for a microchip capillary electrophoresis (CE). The microchip CE-ECL system described in this article consists of a poly(dimethylsiloxane) (PDMS) layer containing separation and injection channels and an electrode plate with an ITO electrode fabricated by a photolithographic method. The PDMS layer was reversibly bound to the ITO electrode plate, which greatly simplified the alignment of the separation channel with the working electrode and enhanced the photon-capturing efficiency. In our study, the high separation electric field had no significant influence on the ECL detector, and decouplers for isolating the separation electric field were not needed in the microchip CE-ECL system. The ITO electrodes employed in the experiments displayed good durability and stability in the analytical procedures. Proline was selected to perform the microchip device with a limit of detection of 1.2 muM (S/N = 3) and a linear range from 5 to 600 muM.

The stability zone of gas hydrate in the slope of East China Sea and neighboring trough basin area

We analyze the distribution of temperature and heat flow of the sea floor sediment in the area of East China Sea slope and West basin area of the Okinawa Trough. Based on the Sonar Buoy and OBS data, 6 velocity layers are recognized, each of which has velocity of 1.8(1.8 similar to 2.2) km/s,2.2(2.0 similar to 2.5)km/s,2.8 (2.7 similar to 3.2)km/s,3.4 similar to 3.6km/s,4.2(4.1 similar to 4.7)km/s and 5.1km/s, respectively. The upper velocity layer of 1.8 similar to 2.2 km/s corresponds to the Quaternary sediment stratum. The layer with velocity 3.4 similar to 4.2km/s is the Pliocene sediment stratum. The area that is suitable for stable existence of gas hydrate by the temperature and pressure is 70,000km(2) about 1/10 the total area of East China Sea. The thickness of the stability zone ranges from 400m (Middle Part of Okinawa Trough) to 1100m (North and South Part of Okinawa Trough). The Quaternary and Pliocene layers are suitable for stable exitence of gas hydrate. According to the tectonic stability and heat flow, the north part and south part of the Okinawa Trough are the most perspective area for the gas hydrate explorations.

Seismic profiles across the middle Tan-Lu fault zone in Laizhou Bay, Bohai Sea, eastern China

The stratigraphic architecture, structure and Cenozoic tectonic evolution of the Tan-Lu fault zone in Laizhou Bay, eastern China, are analyzed based on interpretations of 31 new 2D seismic lines across Laizhou Bay. Cenozoic strata in the study area are divided into two layers separated by a prominent and widespread unconformity. The upper sedimentary layer is made up of Neogene and Quaternary fluvial and marine sediments, while the lower layer consists of Paleogene lacustrine and fluvial facies. In terms of tectonics, the sediments beneath the unconformity can be divided into four main structural units: the west depression, central uplift, east depression and Ludong uplift. The two branches of the middle Tan-Lu fault zone differ in their geometry and offset: the east branch fault is a steeply dipping S-shaped strike-slip fault that cuts acoustic basement at depths greater than 8 km, whereas the west branch fault is a relatively shallow normal fault. The Tan-Lu fault zone is the key fault in the study area, having controlled its Cenozoic evolution. Based on balanced cross-sections constructed along transverse seismic line 99.8 and longitudinal seismic line 699.0, the Cenozoic evolution of the middle Tan-Lu fault zone is divided into three stages: Paleocene-Eocene transtension, Oligocene-Early Miocene transpression and Middle Miocene to present-day stable subsidence. The reasons for the contrasting tectonic features of the two branch faults and the timing of the change from transtension to transpression are discussed. Crown Copyright (C) 2008 Published by Elsevier Ltd. All rights reserved.

Microstructure and wear properties of laser clad Fe based amorphous composite coatings

A FeNiSiBV amorphous composite coating was developed by laser cladding of metallic powders on AISI 1020 low carbon steel substrate. The coatings were studied using X-ray diffraction, transmission electron microscopy and scanning electron microscopy. The coating reveals different microstructures along the depth of the coating. The transition zone exhibits good metallurgical bonding between the substrate and the coating. The layer consists of amorphous phase in majority and nanocrystalline phase/crystalline phase in minority. Accompanied with the nanocrystalline phase, the amorphous phase is concentrated in the middle of the coating. The crystalline phase in the coating is identified as Fe2B. A gradient distribution of the microhardness ranges from 1208 HV0.2 to 891 HV0.2 in the coating along the depth. The coating shows higher microhardness and better wear property than the substrate.

Assessment of coastal zone sustainable development: A case study of Yantai, China

The assessment of sustainable development is a challenging task as its measuring is rather complex without a mature framework. In this paper, as a case study, a coastal city of China-Yantai was assessed for sustainable development in the period from 1998 to 2007. We used a methodological framework based on 36 indicators and three composite indices from the dimensions of environment, economy and society subsystems. The assessment results indicated that Yantai was almost in the potentially unsustainable development or intermediate sustainable development, except in 1998 and in 2007. Accordingly, the progress of sustainable development was divided into two stages in the light of the relative changes of three subsystems. Some relevant issues, such as natural capital, GPI vs. GDP in sustainable development assessment were discussed. Finally, an uncertainty analysis was also given in the assessment. In conclusion, the sustainable development in Yantai had experienced a shift from environment-based to social-economic-based in the past 10 years. (C) 2010 Elsevier Ltd. All rights reserved.

Transfer and transport of phosphorus and silica in the turbidity maximum zone of the Changjiang estuary

The concentration of suspended particulate matter (SPM), sedimentation flux, and various forms of phosphorus and silica in turbidity maximum zone (TMZ) in the Changjiang (Yangtze) estuary was studied. Based on the budget of P and Si, their mass balances in the TMZ were calculated. Results show that the variation in concentration of dissolved inorganic silicon (DISi) was mainly controlled by seawater dilution, while that of dissolved inorganic phosphor-us (DIP) was considerably affected by the buffering of suspended matter and sediment. Our experiments showed that the sedimentation fluxes of SPM and particulate inorganic phosphorus (PIP), total particulate phosphorus (TPP), particulate inorganic silicon (PISi), and biological silicon (BSi) in the TMZ were 238.4 g m(-2) d(-1) and 28.3, 43.1, 79.0, 63.0 mg m(-2) d(-1), respectively. In addition, a simple method to estimate the ratio of resuspension of sediment in the TMZ was established, with which the rate in surface and bottom waters of the TMZ accounted for 55.7 and 66.1% of the total SPM, respectively, indicating that the sediment resuspension in the TMZ influenced significantly the mass balances of P and Si. Particulate adsorbed P (60.8%) and 35.5% of total particulate P discharged from the river were filtered and then deposited in the TMZ. The input flux of PIP from the river mouth was 55.9% of that of DIP, being important as biologically available P, while that of PISi was only 3.5% of DISi, showing that particulate adsorbed Si was much less important than particulate adsorbed P. (c) 2008 Elsevier Ltd. All rights reserved.

热察绥地区过去300年土地利用覆被变化

The historical land use and land cover changes is one of the key issues in LUCC research. However, the achievement of China in this field doesn't match her position in the world yet. And the reliability of the quantitive records in Chinese historical literature, the basic data for historical land use research, has been doubted. This research focuses on Re-Cha-Sui, a typical area for the farming-pastoral region in the north of China, to make a detailed case study in this field. Based on a deep mining and calibration on the data from massive historical documents and land-use surveys, the author gives a detailed analysis on the administrative region evolution, historical population dynamics, reclamation policy, and the land statistic system. According to textual researches, parallel validation and physical geographical analysis, a unified land use series for recent 300 years, which founded on the results of modern land-use surveys, is constructed. And the thematic maps on the cultivation index for different counties in several temporal sections are plotted. Based on the endeavor above, the dynamic of forest and steppe is reconstructed as well. The temporal-spatial patterns of land use/land cover changes in the area is analyzed. And the influence of different driving forces are discussed. The main conclusions of the research are as followed: 1. The quantitive records in literatures on Re-Cha-Sui area are reflection of real amounts of croplands. It is practical to reconstruct a result comparable with the modern land-use surveys, based of a deep mining and considerate validation on historical documents. The unexceptional negative attitude towards the numerical records in historical documents is unnecessary. 2. In recent 300 years, 3 climax of reclamation appeared in Re-Cha-Sui area and altered the pure pastoral area into a farming-pastoral region. The interval were respectively the early time till mid time of the Qing dynasty, the end of the Qing dynasty till early time of the Republic of China(ROC), and the time after A.D. 1949. After the first expansion, the area of cropland in this region reached 2.0 million ha. Among them, Guisui area, which was most densely cultivated, had a cultivation index over 30%, which is similar with modern situation. The second expansion covered broader area, and the amount of cropland reached 3.5 million ha. The increase of farming area after 1949 is due to the recultivation of abandoned farmland. The current area of cropland in this region is 5.6 million ha. In the southern area where the land was reclaimed early, the amount on of the cropland has some fluctuation in 300 years. While in the new reclaimed area in the north, the area of cropland has kept the trend of increasing. 3. Due to the different natural conditions, most forests in Re-Cha-Sui area distribute in the mountain area of North Hebei province, and the upland of West Liaoning province, especially the former, which has a forest coverage near 70%. However, most of these forests were destroyed before the end of the Qing dynasty. In 1949, the natural forest near Chengde was nearly cleared up. They were partly renewed after 1949 due to plantation. 4. In the steppe zone such as northern Rehe, Suiyuan and Chahar, the area of steppe has a negative correlation with that of cropland. With the expansion of cropland, the percentage of steppe has shrunk from over 80% to 53%. In the mountain area of North Hebei province, steppe expanded with the shrinkage of forest, though cropland was expanding. The percentage once reached 60%, and then fell with the renew of forest. However, in the upland of West Liaoning province, the steppe shrink slowly from original 50% to current 26%, with the expansion of cropland. 5. The land use and land cover change in Re-Cha-Sui area in recent 300 years is driven by various factors, including human dimensions such as population, policy of the government, disorder of the society, cultural tradition, and natural factors such as climate change and natural disasters. Among them, pressure from surplus population is the basic driving force.

Capillary zone electrophoresis characterization of low molecular weight heparin binding to interleukin 2

A method based on capillary zone electrophoresis (CZE) was used to study the interaction between low molecular weight heparin (LMWH) and interleukin 2 (IL-2). The results showed that the increase of the concentration of LMWH led to the decrease of the peak height and the increase of the peak width of IL-2, but the peak areas were kept constant. The binding constant of IL-2 with LMWH was calculated as 1.2 x 10(6) M(-1) by Scatchard analysis, which is in good agreement with the results found in the references using enzyme-linked immunosorbent assay (ELISA). The results demonstrated that the interaction between IL-2 and LMWH is of fast on-and-off kinetic binding reaction. CZE might be used to study not only slow on-and-off rates interactions, but also fast on-and-off rates ones. The binding constant can be calculated easily, and the method can be applied to study a wide range of heparin-protein interactions. (c) 2005 Elsevier B.V. All rights reserved.

Physicochemical characterization of the Strychnos alkaloids by capillary zone electrophoresis

A capillary zone electrophoresis (CZE) method has been developed for investigating the physicochemical characteristics of five Strychnos alkaloids in Strychnos nux-vomica L. Firstly, the dissociation constants of the five Strychnos alkaloids were determined, based on the relation between the effective mobility of the solutes and the buffer pH. The mathematical relationship was strictly deduced from the fundamental electrophoretic theory and the dissociation equilibrium. Secondly, an equation describing the relation between the migration time of alkaloids of similar structure and their molecular weights was developed and used to predict the migration order and to calculate the electrosomotic velocity. The results predicted by the theory agreed with those from experiments.

Novel information sharing syntax for data sharing between police and community partners, using role-based security.

The exchange of information between the police and community partners forms a central aspect of effective community service provision. In the context of policing, a robust and timely communications mechanism is required between police agencies and community partner domains, including: Primary healthcare (such as a Family Physician or a General Practitioner); Secondary healthcare (such as hospitals); Social Services; Education; and Fire and Rescue services. Investigations into high-profile cases such as the Victoria Climbié murder in 2000, the murders of Holly Wells and Jessica Chapman in 2002, and, more recently, the death of baby Peter Connelly through child abuse in 2007, highlight the requirement for a robust information-sharing framework. This paper presents a novel syntax that supports information-sharing requests, within strict data-sharing policy definitions. Such requests may form the basis for any information-sharing agreement that can exist between the police and their community partners. It defines a role-based architecture, with partner domains, with a syntax for the effective and efficient information sharing, using SPoC (Single Point-of-Contact) agents to control in-formation exchange. The application of policy definitions using rules within these SPoCs is inspired by network firewall rules and thus define information exchange permissions. These rules can be imple-mented by software filtering agents that act as information gateways between partner domains. Roles are exposed from each domain to give the rights to exchange information as defined within the policy definition. This work involves collaboration with the Scottish Police, as part of the Scottish Institute for Policing Research (SIPR), and aims to improve the safety of individuals by reducing risks to the community using enhanced information-sharing mechanisms.

An integrated firewall policy validation tool.

Security policies are increasingly being implemented by organisations. Policies are mapped to device configurations to enforce the policies. This is typically performed manually by network administrators. The development and management of these enforcement policies is a difficult and error prone task. This thesis describes the development and evaluation of an off-line firewall policy parser and validation tool. This provides the system administrator with a textual interface and the vendor specific low level languages they trust and are familiar with, but the support of an off-line compiler tool. The tool was created using the Microsoft C#.NET language, and the Microsoft Visual Studio Integrated Development Environment (IDE). This provided an object environment to create a flexible and extensible system, as well as simple Web and Windows prototyping facilities to create GUI front-end applications for testing and evaluation. A CLI was provided with the tool, for more experienced users, but it was also designed to be easily integrated into GUI based applications for non-expert users. The evaluation of the system was performed from a custom built GUI application, which can create test firewall rule sets containing synthetic rules, to supply a variety of experimental conditions, as well as record various performance metrics. The validation tool was created, based around a pragmatic outlook, with regard to the needs of the network administrator. The modularity of the design was important, due to the fast changing nature of the network device languages being processed. An object oriented approach was taken, for maximum changeability and extensibility, and a flexible tool was developed, due to the possible needs of different types users. System administrators desire, low level, CLI-based tools that they can trust, and use easily from scripting languages. Inexperienced users may prefer a more abstract, high level, GUI or Wizard that has an easier to learn process. Built around these ideas, the tool was implemented, and proved to be a usable, and complimentary addition to the many network policy-based systems currently available. The tool has a flexible design and contains comprehensive functionality. As opposed to some of the other tools which perform across multiple vendor languages, but do not implement a deep range of options for any of the languages. It compliments existing systems, such as policy compliance tools, and abstract policy analysis systems. Its validation algorithms were evaluated for both completeness, and performance. The tool was found to correctly process large firewall policies in just a few seconds. A framework for a policy-based management system, with which the tool would integrate, is also proposed. This is based around a vendor independent XML-based repository of device configurations, which could be used to bring together existing policy management and analysis systems.