Propagation of the Ignition Front against Airflow in Packed Beds of Wood Particles

Combustion of wood is increasing because of the needs of decreasing the emissions of carbon dioxide and the amount of waste going to landfills. Wood based fuels are often scattered on a large area. The transport distances should be short enough to prevent too high costs, and so the size of heating and power plants using wood fuels is often rather small. Combustion technologies of small-size units have to be developed to reach efficient and environmentally friendly energy production. Furnaces that use different packed bed combustion or gasification techniques areoften most economic in small-scale energy production. Ignition front propagation rate affects the stability, heat release rate and emissions of packed bed combustion. Ignition front propagation against airflow in packed beds of wood fuels has been studied. The research has been carried out mainly experimentally. Theoretical aspects have been considered to draw conclusions about the experimental results. The effects of airflow rate, moisture content of the fuel, size, shape and density of particles, and porosity of the bed on the propagation rate of the ignition front have been studied. The experiments were carried out in a pot furnace. The fuels used in the experiments were mainly real wood fuels that are often burned in the production of energy. The fuel types were thin wood chips, saw dust, shavings, wood chips, and pellets with different sizes. Also a few mixturesof the above were tested. Increase in the moisture content of the fuel decreases the propagation rates of the ignition front and makes the range of possible airflow rates narrower because of the energy needed for the evaporation of water and the dilution of volatile gases due to evaporated steam. Increase in the airflow rate increases the ignition rate until a maximum rate of propagation is reached after which it decreases. The maximum flame propagation rate is not always reached in stoichiometric combustion conditions. Increase in particle size and density transfers the optimum airflow rate towards fuel lean conditions. Mixing of small and large particles is often advantageous, because small particles make itpossible to reach the maximum ignition rate in fuel rich conditions, and large particles widen the range of possible airflow rates. A correlation was found forthe maximum rate of ignition front propagation in different wood fuels. According to the correlation, the maximum ignition mass flux is increased when the sphericity of the particles and the porosity of the bed are increased and the moisture content of the fuel is decreased. Another fit was found between sphericity and porosity. Increase in sphericity decreases the porosity of the bed. The reasons of the observed results are discussed.

"In vitro" comparative experimental study of antimicrobial action of mouth washing products

Regular use of mouth rinses modifies the oral habitat, since bacterial populations are submitted to a high selective pressure during the treatment exercised by the active presence of the disinfectant. Mostly mouth rinses are based on the antibacterial effect of Chlorhexidine, Triclosan, essential oils and other antibacterials although other pharmaceutical characteristics can also affect their effectiveness. In this paper we compare"in vitro" the antibacterial effect of different oral rinsing solutions. Minimal Inhibitory Concentrations (MIC) and Minimal Bactericidal Concentrations (MBC) were determined as well as the kinetics of bacterial death in the presence of letal concentrations of the mouth rinses. MIC values expressed as Maximal Inhibitory Dilution (MID) of the mouth rinse ranged from 1 to 1/2048 depending on the microorganism and product, whereas Minimal Biocidal Concentration (MBC), expressed as Maximal Biocidal Dilution (MBD) ranged from 1 to 1/1024, being in general one dilution less than MIC. Maximal Biocidal Dilution is a good tool to measure the actual efficiency of mouth washing solutions. However, kinetics of death seems to be better in our work killing curves demonstrate that bacterial populations are mostly eliminated during the first minute after the contact of bacterial suspension and the mouth-washing solution. In all tested bacterial species mouth-washing solutions tested were able to reduce until suspension treated except 1 and 5

Empirical models for predicting the production of wild mushrooms in Scots pine (Pinus sylvestris L.) forests in the Central Pyrenees

Mushroom picking has become a widespread autumn recreational activity in the Central Pyrenees and other regions of Spain. Predictive models that relate mushroom production or fungal species richness with forest stand and site characteristics are not available. This study used mushroom production data from 24 Scots pine plots over 3 years to develop a predictive model that could facilitate forest management decisions when comparing silvicultural options in terms of mushroom production. Mixed modelling was used to model the dependence of mushroom production on stand and site factors. The results showed that productions were greatest when stand basal area was approximately 20 m2 ha-1. Increasing elevation and northern aspect increased total mushroom production as well as the production of edible and marketed mushrooms. Increasing slope decreased productions. Marketed Lactarius spp., the most important group collected in the region, showed similar relationships. The annual variation in mushroom production correlated with autumn rainfall. Mushroom species richness was highest when the total production was highest.

Immune Antibodies and Helminth Products Drive CXCR2-Dependent Macrophage-Myofibroblast Crosstalk to Promote Intestinal Repair.

Helminth parasites can cause considerable damage when migrating through host tissues, thus making rapid tissue repair imperative to prevent bleeding and bacterial dissemination particularly during enteric infection. However, how protective type 2 responses targeted against these tissue-disruptive multicellular parasites might contribute to homeostatic wound healing in the intestine has remained unclear. Here, we observed that mice lacking antibodies (Aid-/-) or activating Fc receptors (Fcrg-/-) displayed impaired intestinal repair following infection with the murine helminth Heligmosomoides polygyrus bakeri (Hpb), whilst transfer of immune serum could partially restore chemokine production and rescue wound healing in Aid-/- mice. Impaired healing was associated with a reduced expression of CXCR2 ligands (CXCL2/3) by macrophages (MΦ) and myofibroblasts (MF) within intestinal lesions. Whilst antibodies and helminths together triggered CXCL2 production by MΦ in vitro via surface FcR engagement, chemokine secretion by intestinal MF was elicited by helminths directly via Fcrg-chain/dectin2 signaling. Blockade of CXCR2 during Hpb challenge infection reproduced the delayed wound repair observed in helminth infected Aid-/- and Fcrg-/- mice. Finally, conditioned media from human MΦ stimulated with infective larvae of the helminth Ascaris suum together with immune serum, promoted CXCR2-dependent scratch wound closure by human MF in vitro. Collectively our findings suggest that helminths and antibodies instruct a chemokine driven MΦ-MF crosstalk to promote intestinal repair, a capacity that may be harnessed in clinical settings of impaired wound healing.

'Herbal' but potentially hazardous: an analysis of the constituents and smoke emissions of tobacco-free waterpipe products and the air quality in the cafes where they are served

BACKGROUND: There are limited data on the composition and smoke emissions of 'herbal' shisha products and the air quality of establishments where they are smoked. METHODS: Three studies of 'herbal' shisha were conducted: (1) samples of 'herbal' shisha products were chemically analysed; (2) 'herbal' and tobacco shisha were burned in a waterpipe smoking machine and main and sidestream smoke analysed by standard methods and (3) the air quality of six waterpipe cafes was assessed by measurement of CO, particulate and nicotine vapour content. RESULTS: We found considerable variation in heavy metal content between the three products sampled, one being particularly high in lead, chromium, nickel and arsenic. A similar pattern emerged for polycyclic aromatic hydrocarbons. Smoke emission analyses indicated that toxic byproducts produced by the combustion of 'herbal' shisha were equivalent or greater than those produced by tobacco shisha. The results of our air quality assessment demonstrated that mean PM2.5 levels and CO content were significantly higher in waterpipe establishments compared to a casino where cigarette smoking was permitted. Nicotine vapour was detected in one of the waterpipe cafes. CONCLUSIONS: 'Herbal' shisha products tested contained toxic trace metals and PAHs levels equivalent to, or in excess of, that found in cigarettes. Their mainstream and sidestream smoke emissions contained carcinogens equivalent to, or in excess of, those of tobacco products. The content of the air in the waterpipe cafes tested was potentially hazardous. These data, in aggregate, suggest that smoking 'herbal' shisha may well be dangerous to health.

Short communication.Wood identification based on their common name and their transversal surface anatomy. Application to the batch from the expedition of Ruiz and Pavon

Aim of study: To identify species of wood samples based on common names and anatomical analyses of their transversal surfaces (without microscopic preparations). Area of study: Spain and South America Material and methods: The test was carried out on a batch of 15 lumber samples deposited in the Royal Botanical Garden in Madrid, from the expedition by Ruiz and Pavon (1777-1811). The first stage of the methodology is to search and to make a critical analysis of the databases which list common nomenclature along with scientific nomenclature. A geographic filter was then applied to the information resulting from the samples with a more restricted distribution. Finally an anatomical verification was carried out with a pocket microscope with a magnification of x40, equipped with a 50 micrometers resolution scale. Main results: The identification of the wood based exclusively on the common name is not useful due to the high number of alternative possibilities (14 for “naranjo”, 10 for “ébano”, etc.). The common name of one of the samples (“huachapelí mulato”) enabled the geographic origin of the samples to be accurately located to the shipyard area in Guayaquil (Ecuador). Given that Ruiz y Pavon did not travel to Ecuador, the specimens must have been obtained by Tafalla. It was possible to determine correctly 67% of the lumber samples from the batch. In 17% of the cases the methodology did not provide a reliable identification. Research highlights: It was possible to determine correctly 67% of the lumber samples from the batch and their geographic provenance. The identification of the wood based exclusively on the common name is not useful.

Effects of Dietary Fat Oxidation Products and Flavonols on Lipoprotein Oxidation

Various studies suggest that oxidative modifications of low density lipoprotein (LDL), and also other lipoproteins, have an important role in the development of atherosclerosis. In addition to the oxidation products formed endogenously, oxidised triacylglycerols (TAG) and oxysterols in the diet contribute to the oxidised lipoproteins found in circulation. However, studies on both the effect of oxidised dietary lipids on lipoprotein lipid oxidation and the reactions that modify oxidised fat after ingestion have been scarce. Studies on the effects of dietary antioxidants on the lipid oxidation in vivo and the risk of atherosclerosis have been inconclusive. More clinical trials are needed to test the importance of lipoprotein oxidation as a cardiovascular risk factor in humans. In the recent years, various methods have been optimised and applied to the analysis of lipid oxidation products in vivo, and information on the molecular structures of oxidised lipids in plasma, lipoproteins and atherosclerotic plaques has started to accumulate. However, specific structures of oxidised TAG molecules present in these tissues and lipoprotein fractions have not been investigated earlier. In the orginal research in this thesis, an approach based on highperformance liquid chromatographyelectrospray ionisationmass spectrometry (HPLCESIMS) and baseline diene conjugation (BDC) methods was used in order to investigate lipid oxidation level and oxidised TAG molecular structures in pig and human lipoproteins after dietary interventions. The approach was optimised with human LDL samples, which contained various oxidation products of TAG. LDL particles of hyperlipidaemic subjects contained an elevated amount of conjugated dienes. In the pig studies, several oxidised TAG structures with hydroxy, keto, epoxy or aldehydic groups were found in chylomicrons and VLDL after diets rich in sunflower seed oil. Also, the results showed that oxidised sunflower seed oil increased the oxidation of lipoprotein lipids and their TAG molecules. TAG hydroperoxides could be detected neither in the small intestinal mucosa of the pigs fed on the oxidised oil nor in their chylomicrons or VLDL.6 In the clinical studies, dietary flavonol aglycones extracted from sea buckthorn berries did not have an effect on lipoprotein lipid oxidation and other potential risk factors of atherosclerosis, but their absorption was demonstrated. Oil supplementation seemed to increase the bioavailability of the flavonols. Oxidised TAG molecules were detected in LDL particles of the subjects after both flavonol and control diets.

Viscosity of beta-glucan in oat products

Selostus: Kauran beetaglukaanin viskositeetti kauratuotteissa

Role of lipid reactions in quality of oat products

Selostus: Rasvojen reaktiot prosessoiduissa kauratuotteissa

Assessment of critical competences required in managing end-user driven businesses in a global forest products compa

Työn pääasiallisena tavoitteena on selvittää ydinosaamista, jota tarvitaan kansainvälisen metsäteollisuusyrityksen loppukäyttäjävetoisessa liiketoiminnassa. Lisäksi tavoitteena on laatia kompetenssimalli, jota voidaan käyttää mm. rekrytoinnissa, koulutuksen ja työnkierron suunnittelussa. Tarkoituksena on tarkastella sekä tällä hetkellä että tulevaisuudessa tarvittavia ydinosaamisia. Työ keskittyy myyntihenkilöiden kompetenssien kuvaamiseen. Kirjallisuuden ja asiantuntijoiden haastattelujen avulla on selvitetty. kompetensseihin liittyviä asioita ja käsitteitä, kuten organisaation oppiminen, innovaatiot sekä asiakaslähtöisyys. Tämän jälkeen on kartoitettu case-yrityksen kartonkiyksikön myyntihenkilökunnan kompetensseja. Kompetenssikartoitus on tehty teemahaastattelujen avulla sekä lisäksi on käytetty työn aikana laadittua kompetenssimatriisia. Saatuja tuloksia on verrattu yhden asiakkaan näkemyksiin. Tulosten mukaan kolme tärkeintä tämän hetken kompetenssia ovat: holistinen näkemys asioista, suhteiden rakentaminen ja kielitaito. Tulevaisuuden tärkeimpiä kompetensseja puolestaan ovat: asiakaslähtöisyys, sähköinen kaupankäynti ja suhteiden rakentaminen. Lopuksi on käsitelty yleisiä metsäteollisuuden tulevaisuuden haasteita sekä annettu joitain kehitysideoita kompetenssien kehittämistä varten.

Enterprise Portal as a Knowledge Management Tool in a Global Forest Products Company

Tietojohtaminen on osoittautunut nykypäivänä organisaatioiden yhdeksi suurimmaksi haasteeksi. Haasteena ei vain ole se tiedon määrä mitä tulisi hallita, vaan pikemminkin tiedonhallinta toimii yritykselle kilpailuetuna globaalissa yritysmaailmassa. Tämän työn tavoitteena on tutkia yritysportaalin soveltuvuutta tiedonhallintaan globaalissa metsäteollisuusyrityksessä. Lisäksi tavoitteena on selvittää portaalin sovittamista kullekin käyttäjäryhmälle case yrityksessä. Työn teoriaosassa on käsitelty tiedonhallinnan monimuotoisuutta ja vaikeutta kuvata sitä yksiselitteisesti. Lisäksi käyttäjäryhmien ja käyttäjäprofiilien määrittämiseen vaikuttavia seikkoja on selvitetty tässä osassa. Empiirinen osa käsittelee case-yritystä ja sen suhdetta tiedonhallintaan sekä tämän kaltaisen tiedonhallinnan työvälineen käyttöön. Työstä saatujen tulosten perusteella voidaan todeta yritysportaalin soveltuvan hyvin tiedonhallintaan monimutkaisessakin yrityksessä. Portaali muuttaa yrityksen liiketoimintaprosesseja läpinäkyvämmiksi, kun bisneskriittistä tietoa tarjotaan yhdessä paikassa.

Natural Products from Antarctic Colonial Ascidians of the Genera Aplidium and Synoicum: Variability and Defensive Role

Ascidians have developed multiple defensive strategies mostly related to physical, nutritional or chemical properties of the tunic. One of such is chemical defense based on secondary metabolites. We analyzed a series of colonial Antarctic ascidians from deep-water collections belonging to the genera Aplidium and Synoicum to evaluate the incidence of organic deterrents and their variability. The ether fractions from 15 samples including specimens of the species A. falklandicum, A. fuegiense, A. meridianum, A. millari and S. adareanum were subjected to feeding assays towards two relevant sympatric predators: the starfish Odontaster validus, and the amphipod Cheirimedon femoratus. All samples revealed repellency. Nonetheless, some colonies concentrated defensive chemicals in internal body-regions rather than in the tunic. Four ascidian-derived meroterpenoids, rossinones B and the three derivatives 2,3-epoxy-rossinone B, 3-epi-rossinone B, 5,6-epoxy-rossinone B, and the indole alkaloids meridianins A-G, along with other minoritary meridianin compounds were isolated from several samples. Some purified metabolites were tested in feeding assays exhibiting potent unpalatabilities, thus revealing their role in predation avoidance. Ascidian extracts and purified compound-fractions were further assessed in antibacterial tests against a marine Antarctic bacterium. Only the meridianins showed inhibition activity, demonstrating a multifunctional defensive role. According to their occurrence in nature and within our colonial specimens, the possible origin of both types of metabolites is discussed.

Metsäsektorin kehityksen vaikutus raaka-ainetarpeeseen ja rakenteeseen

Tutkimuksen tavoitteena on selvittää kuinka raakapuumarkkinat muodostuvat ja mitkä tekijät vaikuttavat raakapuun tarjontaan ja hankintaan. Lisäksi tarkastellaan onko tuontipuu korvaava vai täydentävä raaka-aine ja millainen rooli valtiovallalla on luodessaan yrityksille toimintaympäristöä. Työ on voimakkaasti teoreettispainotteinen. Teorian tarkoituksena on esittää se tieteellinen perusta, jolle raakapuumarkkinat sijoittuvat. Lisäksi on hyväksikäytetty aiemmin tehtyjä tutkimuksia, joiden tarkoituksena on valaista asiaa hieman käytännönläheisemmin. Työn tuloksena saadaan vastaukset tutkimuksen tavoitteisiin. Tulosten perusteella on ilmeistä, että keskeisin tarjontaan vaikuttava tekijä on puun hinta ja etenkin siihen liittyvät hintaodotukset. Kysyntään on puolestaan vaikuttanut teollisuuden kapasiteetin kehitys, tuotteiden menekki ja tuontipuun saatavuus. Tuotu koivukuitu on pikemminkin täydentänyt kuin korvannut kotimaan koivukuitua teollisuuden puun hankinnassa. Tuotu mäntykuitu toimii korvaavana tuotteena, mutta kuusikuidun kohdalla kotimaan hinnalla ei ole vaikutusta tuonnin määrään, ainoastaan tuontipuun omalla hinnalla näyttää olevan vaikutus tuontimäärään.

Effect of feed fat by-products with trans fatty acids and heated oil on cholesterol and oxycholesterols in chicken

Chicken is the most widely consumed meat all over the world due to chickens being easy to rear, their fast growth rate and the meat having good nutritional characteristics. The main objective of this paper was to study the effects of dietary fatty by-products in low, medium and high levels of oxidized lipids and trans fatty acids (TFAs) on the contents of cholesterol and oxycholesterols in meat, liver, and plasma of chickens. A palm fatty acid distillate, before and after hydrogenation, and a sunflower-olive oil blend (70/30, v/v) before and after use in a commercial frying process were used in feeding trials after adding 6% of the fats to the feeds. Highly oxidized lipid and TFA feeds significantly increased the contents of cholesterol and oxycholesterols in all tissues of chicken (0.01 < p <= 0.05). The contents of oxycholesterols in chicken meat, liver and plasma obtained from TFA feeding trials varied between 17 and 48 μg/100 g in meat, 19-42 μg/100 g in liver and 105-126 μg/dL in plasma. In contrast, in the oxidized lipid feeding trials, oxycholesterols varied between 13 and 75 μg/100 g in meat, 30-58 μg/100 g in liver and 66-209 μg/dL in plasma. Meat from chickens fed with feeds containing high levels of TFAs or oxidized lipids may contribute to higher ingestion of cholesterol and oxycholesterols by humans.