Hepatitis B virus infection in a population exposed to occupational hazards: firefighters of a metropolitan region in central Brazil

INTRODUCTION: By the nature of their activities, firefighters are exposed to a high risk of contracting hepatitis B virus (HBV) as most of the Fire Brigade occurrences in Campo Grande, State of Mato Grosso do Sul (MS), Brazil, are related to the rescue of victims of traffic accidents and the transportation of clinical and psychiatric emergencies. The aim of this study was to investigate the seroepidemiological profile of HBV infection in firefighters from the City of Campo Grande, central Brazil. METHODS: The research involved 308 firefighters. After giving written consent, they were interviewed and blood was collected for the detection of HBsAg, anti-HBs and total anti-HBc of enzyme-linked immunosorbent assays (ELISA). RESULTS: The participants had an average of 36.4 years of age (SD ± 6.5), being 89.9% male. Blood tests revealed 6.5% of seropositivity for hepatitis B (HB) infection (n=20), and 1% for HbsAg. Isolated anti-HBs markers, indicative of vaccine immunity, were found in 66.9% of the participants and 28.2% were susceptible to infection. With regard to risk factors for HB infection, multivariate regression analysis showed a statistically significant association with length of service; and prevalence was higher in individuals with over 20 years of service. CONCLUSIONS: The prevalence of HB found among the firefighters was low and length of time in the profession was found to be a risk factor. Non-occupational risk factors did not influence the occurrence of HB infection in the population studied.

Experimental characterization of an earth eco-efficient plastering mortar

Earthen plastering mortars are becoming recognized as highly eco-efficient. The assessment of their technical properties needs to be standardized but only the German standard DIN 18947 exists for the moment. An extended experimental campaign was developed in order to assess multiple properties of a ready-mixed earth plastering mortar and also to increase scientific knowledge of the influence of test procedures on those properties. The experimental campaign showed that some aspects related to the equipment, type of samples and sample preparation can be very important, while others seemed to have less influence on the results and the classification of mortars. It also showed that some complementary tests can easily be performed and considered together with the standardized ones, while others may need to be improved. The plaster satisfied the requirements of the existing German standard but, most importantly, it seemed adequate for application as rehabilitation plaster on historic and modern masonry buildings. Apart from their aesthetic aspect, the contribution of earthen plasters to eco-efficiency and particularly to hygrometric indoor comfort should be highlighted.

Development of an experimental setup for metal cutting research

Analytical, numerical and experimental models have been developed over time to try to characterize and understand the metal cutting process by chip removal. A true knowledge of the cutting process by chip removal is required by the increasing production, by the quality requirements of the product and by the reduced production time, in the industries in which it is employed. In this thesis an experimental setup is developed to evaluate the forces and the temperature distribution in the tool according to the orthogonal cutting model conditions, in order to evaluate its performance and its possible adoption in future works. The experimental setup is developed in a CNC lathe and uses an orthogonal cutting configuration, in which thin discs fixed onto a mandrel are cut by the cutting insert. In this experimental setup, the forces are measured by a piezoelectric dynamometer while temperatures are measured by thermocouples placed juxtaposed to the side face of the cutting insert. Three different solutions are implemented and evaluated for the thermocouples attachment in the cutting insert: thermocouples embedded in thermal paste, thermocouples embedded in copper plate and thermocouples brazed in the cutting insert. From the tests performed in the experimental setup it is concluded that the adopted forces measurement technique shows a good performance. Regarding to the adopted temperatures measurement techniques, only the thermocouples brazed in the cutting insert solution shows a good performance for temperature measurement. The remaining solutions show contact problems between the thermocouple and the side face of the cutting insert, especially when the vibration phenomenon intensifies during the cut. It is concluded that the experimental setup does not present a sufficiently robust and reliable performance, and that it can only be used in future work after making improvements in the assembly of the thermocouples.

Factors that determine the level of care children and adolescents experiencing mental disorders receive

RESUMO: Resumo Uma prestação de serviços de saúde mental para crianças e adolescentes (CAMHS) oportuna, eficaz e baseada na evidência pode evitar incapacidade a longo prazo. No entanto, estes serviços são criticamente sub-financiados em todo o mundo. É um imperativo garantir que este precioso recurso não seja desperdiçado. Os governos e outras partes interessadas relevantes na área da saúde mental precisam de conhecer o estado de saúde mental da população, quais os recursos disponíveis e como melhor utilizar os recursos disponíveis para orientar uma política e decisões efectivas sobre os níveis de serviços. Objetivo: O objetivo deste artigo é explorar o papel da acuidade, gravidade e complexidade na determinação dos cuidados em saúde mental especializados recebidos por crianças e adolescentes que sofrem perturbações mentais. Métodos: Este estudo é exploratório envolvendo uma revisão sistemática da literatura. Foi realizada uma pesquisa com palavras-chave utilizando bases de dados PsychINFO, EMBASE, PubMed e MEDLINE. A literatura cinzenta também foi investigada com um enfoque nas abordagens sistémicas, organizacionais e políticas para a organização e comissionamento de CAMHS. Foram selecionados apenas documentos escritos em Inglês. Três países, Bélgica, Reino Unido e Estados Unidos, todos eles com modelos muito diferentes de organização de CAMHS, foram revistos para investigar de que forma os conceitos de acuidade, gravidade e complexidade foram utilizados na sua concepção de serviços para determinar o nível da assistência prestada. Resultados: Nem a Bélgica, nem o modelo norte-americano de CAMHS organização de serviço parecem estar alinhados com os principais conceitos na determinação do nível de prestação de serviços. O sistema de serviços do Reino Unido de CAMHS está mais estreitamente alinhado com esses conceitos e tem uma alocação de recursos mais equilibrada entre o hospital e a comunidade. O seu ponto fraco está na falta de flexibilidade entre os níveis de serviço e na falta de apoio para com o sector dos cuidados de saúde primários. Conclusões: A variabilidade na alocação de recursos a diferentes níveis especializados de CAMHS (em regime de internamento, ambulatório, e na comunidade) e o modelo diferente de estrutura de serviços entre os países estudados indica uma inconsistência na forma como as crianças e adolescentes que apresentam aos CAMHS são referenciados para os cuidados que recebem. Isto põe em questão se as crianças e adolescentes com perturbações mentais estão a receber o nível e tipo de cuidados concordantes com as suas necessidades. A concepção e o comissionamento de sistemas de CAMHS levam-nos à discussão de uma série de princípios fundamentais que devem ser considerados. O sistema perfeito no entanto, ainda está para ser encontrado. -------------------------------- ABSTRACT: Provision of timely, effective, evidence based mental health services to children and adolescents can prevent long term impairment, but they are critically underfunded across the globe. There is an imperative to ensure this precious resource is not wasted. Governments and other relevant mental health stakeholders need to know the mental health status of the population, what resources are available and how best to use the resources available to guide effective policy and decisions about service levels. Aim: The aim of this paper is to explore the role of acuity, severity and complexity in determining the specialist mental health care that children and adolescents experiencing mental disorders receive. Methods: This study is exploratory involving a systematic scan of the literature. A key word search was conducted using databases PSYCHINFO, EMBASE, PUBMED and MEDLINE. Grey literature was also searched to focus on systemic, organisational and policy approaches to the organisation and commissioning of CAMHS. Only documents written in English were selected. Three countries Belgium, UK and the US all with very different models of service organisation for CAMHS were reviewed to investigate how well the concepts of acuity, severity and complexity were used to determine the level of care delivered in their service design. Findings: Neither the Belgium nor the US model of CAMHS service organisation appear to align with the key concepts driving intensity of level of service provision. The UK CAMHS service system most closely aligns with the concepts. It has a more balanced resource allocation between hospital and community. Its downfall is in its lack of flexibility between service levels and its lack of support for the primary care sector. Conclusions: The variability in resource allocation to different service levels (inpatient, outpatient, community) within specialist CAMHS and the differing model of service structure across countries indicates an inconsistency in how children and adolescents presenting to CAMHS are allocated to the care they receive. This puts into question whether children and adolescent with mental disorders are receiving a level and type of care commensurate with their needs. In commissioning and designing CAMHS systems a number of key principles that should be considered are discussed. The perfect system however, is yet to be found.

Implementation of WHO Quality Rights assessment in Kabul Mental Health Hospital

RESUMO: Objetivo Avaliar a qualidade dos serviços de saúde mental e a situação dos direitos humanos no Hospital de Saúde Mental de Kabul (KMHH) e fornecer recomendações para o desenvolvimento de um plano de melhoria, actualização e revisão da Política, Estratégia e Plano Nacionais de Saúde Mental,. Métodos A avaliação foi realizada em Janeiro de 2015 no KMHH e na Burn Ward do Hospital Terciário de Isteqlal por uma equipa multidisciplinar usando Qualidade Direitos Tool Kit da OMS. Antes da avaliação, o protocolo foi aprovado pelo Institutional Review Board e obtido o consentimento informado de cada entrevistado. Realizaram-se entrevistas com 16 utentes do serviço, 17 funcionários do hospital e 7 familiares, além da revisão de documentos e da observação das unidades de internamento do KMHH e das interações interpessoais entre funcionários do hospital e utentes do serviço. A comissão de avaliação reviu também a documentação e observou a Unidade de Queimados do Hospital Terciário de Isteqlal, a fim de avaliar e comparar a paridade entre as duas instalações. Após a avaliação, todos os membros da comissão se reuniram e puseram em conjunto todas as conclusões num relatório final. Resultados Encontrámos algumas lacunas graves no nível de prestação de serviços e no respeito pelos direitos humanos dos utentes dos serviços e dos seus familiares. Uma série de políticas, diretrizes e procedimentos relacionados com os direitos humanos dos pacientes estavam ausentes. O ambiente terapêutico e o padrão de vida eram inadequados, existia má qualidade do atendimento e dos serviços prestados, os utilizadores enfrentavam violações do direito ao exercício da capacidade legal e da liberdade pessoal, eram quimica e fisicamente (uso de correntes) contidos e expostos a abusos verbais, físicos e emocionais, e havia grande ênfase no tratamento institucional. Todos estes aspectos foram considerados como extensa violação dos direitos humanos dos utentes de serviço do KMHH. Conclusão Os serviços disponíveis para utentes dos serviços de saúde mental apresentam alguns problemas devido à desconfiança e falta de consciencialização sobre os direitos das pessoas com doença mental e precisam ser alterados de forma positiva. A Lei de Saúde Mental existente difere muito das recomendações da Convenção sobre os Direitos das Pessoas com Incapacidades (CRPD) e requer revisão e adaptação de acordo com esta Convenção. -------------------------------- ABSTRACT: Objective To assess the quality of mental health services and human rights condition in the Kabul Mental Health Hospital (KMHH) and provide recommendations for development of an improvement plan and to update and revise the National Mental Health Policy, Strategy and Plan. Methods The assessment was conducted in January 2015 in the KMHH and the Burn Ward of Isteqlal Tertiary Hospital by a multidisciplinary team using WHO Quality Rights Tool Kit. Before the assessment, Institutional Review Board approval and informed consent from each interviewee were obtained. Interviews were conducted with 16 service users, 17 hospital staffs and 7 family members in addition to documents review and observation of inpatient units of KMHH plus interpersonal interactions between hospital staff and service users. The assessment committee reviewed the documentation and observed the Burn Ward of Isteqlal Tertiary hospital in order to measure and compare parity between the two facilities. After the assessment, all committee members gathered and synchronized all findings into a final report. Results There were some serious gaps on service provision level and respecting human rights of service users and their family members. A series of policies, guidelines and procedures related to patients’ human rights were absent. Inadequate treatment environment and standard of living, poor quality of care and services, violations of the right to exercise legal capacity and personal liberty, being chemically and physically (e.g. chain) restrained, being exposed to verbal, physical and emotional abuse, and emphasis on institutional treatment were all extensive human rights violation that service users were experiencing in KMHH. Conclusion The available services for mental health service users are questionable due to mistrust and lack of awareness about rights of people with disabilities and need to be positively changed. Existing Mental Health Act has a large number of disparities with the CRPD and requires revision and adaptation in accordance to CRPD.

A conspiracy theory for clefts : the syntax and interpretation of cleft constructions

O objetivo final deste estudo é contribuir para a discussão sobre qual a medida em que conceitos semânticos e discursivos estão sintaticamente codificados. Mais especificamente, investiga-se se existe alguma correlação consistente entre alguns aspetos interpretativos e sintáticos de quatro construções clivadas do Português Europeu, e como se deve dar conta teoricamente destas potenciais correlações. As clivadas consideradas são as clivadas canónicas, as pseudoclivadas, as clivadas de é que e as clivadas de SER. Sintaticamente podemos distinguir dois tipos: clivadas bioracionais (canónicas e pseudoclivadas) e clivadas mono-oracionais (clivadas de é que e de SER). Todas as estruturas têm um constituinte clivado focalizado que pode constituir tanto um foco informacional como um foco contrastivo, e uma oração clivada que introduz uma pressuposição existencial. Adicionalmente, o constituinte clivado identifica exaustivamente uma posição vazia na oração clivada. Adota-se a semântica alternativa para o foco (Rooth 1985), segundo a qual o foco entoacional contribui uniformemente um conjunto de alternativas na Forma Lógica. Regras pragmáticas operando neste conjunto dão origem a duas implicaturas que podem ser suspensas: pressuposição existencial e exaustividade. Dado que as clivadas de é que e as de SER têm a mesma interpretação que orações não-clivadas, conclui-se que a sua estrutura sintática particular não contribui para estas propriedades interpretativas. Em contrapartida, as clivadas bioracionais, que são orações copulativas especificacionais, têm uma presuposição existencial e uma interpretação exaustiva que não pode ser suspensa, tal como as orações especificacionais não-clivadas. Argumenta-se que isto se deve ao facto de o constituinte clivado identificar uma variável introduzida por uma descrição definida. Demonstra-se que a oração clivada, uma relativa em posição de complemento de um determinador definido nas clivadas canónicas e uma relativa livre nas pseudoclivadas, tem a mesma denotação que um DP definido, e portanto tem uma pressuposição existencial inerente. A interpretação exaustiva deve-se à relação identificacional entre o constituinte clivado e a descrição definida. Além disso, defende-se que em Português Europeu um traço de foco não desencadeia movimento-A’ para um FocP especializado. Os constituintes focalizados movem-se antes por razões independentes do foco. Isto é confirmado pelo facto de apenas o constituinte clivado das clivadas de é que ter propriedades de movimento A’, os outros parecem estar in situ. Propõe-se que o constituinte clivado das clivadas de é que é um tópico com um traço de foco que se move para um TopP. Esta análise dá conta da existência de restrições discursivas semelhantes para tópicos não focalizados e para o constituinte clivado das clivadas de é que. O traço quantificacional de foco arrastado pela topicalização dá origem a efeitos de intervenção, causando a não-recursividade do foco na periferia esquerda e a sua incompatibilidade com movimento de outros constituintes com traços quantificacionais. A análise prediz as restrições de encaixe observadas para as clivadas de é que. Finalmente, desenvolve-se uma análise sintática das clivadas de SER que aproxima estas estruturas das estruturas com partículas de foco. Propõe-se que a cópula é um operador sensível ao foco que é merged juntamente com o constituinte clivado. As restrições distribucionais da cópula devem-se a requisitos selecionais de núcleos.

Advancing tendon regeneration through the development of bio-stimulating tissue engineering approaches

Tendon tissue engineering (TE) requires tailoring scaffolds designs and properties to the anatomical and functional requirements of tendons located in different regions of the body. Cell sourcing is also of utmost importance as tendon cells are scarce. Recently, we have found that it is possible to direct the tenogenic differentiation of Amniotic fluid and Adipose tissue derived stem cells (hAFSCs and hASCs), and also that there are hASCs subpopulations that might be more prone to tenogenic differentiation. Nevertheless, biochemical stimulation may not be enough to develop functional TE substitutes for a tissue that is known to be highly dependent on mechanical loading.

HEP-Frame: A software engineered framework to aid the development and efficient multicore execution of scientific code

This work was supported by FCT (Fundação para a Ciência e Tecnologia) within Project Scope (UID/CEC/00319/2013), by LIP (Laboratório de Instrumentação e Física Experimental de Partículas) and by Project Search-ON2 (NORTE-07-0162- FEDER-000086), co-funded by the North Portugal Regional Operational Programme (ON.2 - O Novo Norte), under the National Strategic Reference Framework, through the European Regional Development Fund.

Predicting the distribution of forest tree species using topographic variables and vegetation index in eastern Acre, Brazil

Species distribution modeling has relevant implications for the studies of biodiversity, decision making about conservation and knowledge about ecological requirements of the species. The aim of this study was to evaluate if the use of forest inventories can improve the estimation of occurrence probability, identify the limits of the potential distribution and habitat preference of a group of timber tree species. The environmental predictor variables were: elevation, slope, aspect, normalized difference vegetation index (NDVI) and height above the nearest drainage (HAND). To estimate the distribution of species we used the maximum entropy method (Maxent). In comparison with a random distribution, using topographic variables and vegetation index as features, the Maxent method predicted with an average accuracy of 86% the geographical distribution of studied species. The altitude and NDVI were the most important variables. There were limitations to the interpolation of the models for non-sampled locations and that are outside of the elevation gradient associated with the occurrence data in approximately 7% of the basin area. Ceiba pentandra (samaúma), Castilla ulei (caucho) and Hura crepitans (assacu) is more likely to occur in nearby water course areas. Clarisia racemosa (guariúba), Amburana acreana (cerejeira), Aspidosperma macrocarpon (pereiro), Apuleia leiocarpa (cumaru cetim), Aspidosperma parvifolium (amarelão) and Astronium lecointei (aroeira) can also occur in upland forest and well drained soils. This modeling approach has potential for application on other tropical species still less studied, especially those that are under pressure from logging.

Tailored deposition of coloured coatings: on the widening of the available colour range

Dissertação de mestrado integrado em Engenharia de Materiais

Development of procedures for the design, optimization and manufacturing of customized orthopaedic and trauma implants: Geometrical/anatomical modelling from 3D medical imaging

Tese de Doutoramento (Programa Doutoral em Engenharia Biomédica)

All different or all the same? Exploring the diversity of professional practices in Portuguese school psychology

"Published online: 29 March 2016"

The appraisal of mesophilic anaerobic digestion and thermophilic aerobic digestion in the treatment of municipal sludge in Ireland

It has been well documented that the optimum feedstock for anaerobic digesters consists of readily biodegradable compounds, as found in primary sludge or even a mixed substrate of primary and excess activated sludge. Due to the requirements of the Urban Wastewater Treatment Plant Directive of 1991, the quantities of secondary sludge generated is set to increase substantially. A pilot scale study was undertaken to evaluate the performance of both Mesophilic Anaerobic Digestion and Thermophilic Aerobic digestion in the treatment of secondary sludge. The results indicated that the anaerobic pilot scale digester achieved a greater solids destruction than the aerobic pilot plant averaging at 28% T.S. removal verses 20% for the aerobic digester, despite the fact that secondary sludge is the optimum feedstock for aerobic digestion. This can, however, be attributed to the greater biomass yield experienced with aerobic systems, and to the absence of Autothermal conditions. At present, the traditional technique of Mesophilic Anaerobic Digestion is in widespread application throughout Ireland, for the stabilisation of sewage sludge. There is only one Autothermal Thermophilic Aerobic Digester at present situated in Killarney, Co. Kerry. A further objectives of the study was to compare full-scale applications of Mesophilic Anaerobic Digestion to ATAD. Two Sludge Treatment plants, situated in Co. Kerry, were used for this purpose, and were assessed mainly under the following headings; process stability, solids reduction on average, the ATAD plant in Killarney has the advantage of producing a “Class A” Biosolid in terms of pathogen reduction, and can effectively treat double the quantity of sludge. In addition, economically the ATAD plant is cheaper to run, costing €190 / t.d.s verses €211 / t.d.s. for the anaerobic digester in Tralee. An overview of additional operational Anaerobic Digestion Plants throughout Ireland is also presented.

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.

A Model of Video Traffic Transmission in IP Networks

Telecommunications and network technology is now the driving force that ensures continued progress of world civilization. Design of new and expansion of existing network infrastructures requires improving the quality of service(QoS). Modeling probabilistic and time characteristics of telecommunication systems is an integral part of modern algorithms of administration of quality of service. At present, for the assessment of quality parameters except simulation models analytical models in the form of systems and queuing networks are widely used. Because of the limited mathematical tools of models of these classes the corresponding parameter estimation of parameters of quality of service are inadequate by definition. Especially concerning the models of telecommunication systems with packet transmission of multimedia real-time traffic.