Metodología para el análisis de la relación entre la competividad y la preparación tecnológica en 135 economías mundiales. Factores e indicadores clave de actuación. Conglomerados.

La investigación, plantea como podemos evaluar la competividad en 135 países a partir únicamente de variables tecnológicas. En la metodología se plantea el Protocolo de Cálculo para el total de las economías seleccionadas dentro de los periodos 2005-2006 y 2007-2008, realizando una evaluación estadística. Y estableciendo una discusión, donde analizamos la explicación de las relaciones así como la interpretación de los resultados. Finalmente, evaluamos las conclusiones para las economías mundiales. Dentro de estas economías, localizamos las variables que tienen que priorizarse para mejorar la competividad de las mismas. Estas variables par ten inicialmente de un grupo de 68, y al final de la implementación del método se reducen notablemente. Estas variables finales, llamadas Indicadores Claves de Actuación, se agrupan en factores (Factores Clave de Actuación) que nos simplifican notablemente lo planteado. Para cada grupo de economías se realizan los conglomerados de acuerdo a sus valores dentro de las variables seleccionadas. Se evalúa país a país un análisis detallado de su posicionamiento para cada uno de los Indicadores Claves de Actuación seleccionados matemáticamente. La principal voluntad de la presente información, es simplificar notablemente la comparación entre la competividad de las naciones y su nivel tecnológico. Palabras clave: indicadores, índices, economías, mundiales, análisis multivariante, regresión, factorización, clusterización, análisis de conglomerados, competividad, tecnología, políticas públicas, aspectos regulatorios, operaciones, estrategias comerciales, internet, comparativa cros nacionales, análisis multinivel. Analysis of the relationship between competitiveness and technological development for 135 worldwide countries. Factors and Key Performance Indicators. Clusters of economies Abstract:The research evaluates the competitiveness of 135 countries, based solely on technological variables. The methodology raises calculation protocol for the total of selected economies in the periods 2005-2006 and 2007- 2008. This protocol makes a statistical evaluation. And setting up a discussion, where we analyzed the explanation of the relationship and the interpretation of results. Finally, we evaluate the conclusions for the world economies. Within each group of economies, we know which variables need originally to be prioritized to improve the competitiveness. These variables are from a group of 68, and after the implementation of the method are reduced dramatically in number. These variables will be called Key Performance Indicators and will be grouped into Factors (Key Performance Factors) this will significantly simplify matters. Within this group of countries have been reduced three factors that collect their Key Performance Indicators . A country to country detailed analysis of their positions according to each of the Key Performance Indicators on a mathematical basis.The main desire of this research is to significantly simplify the comparison between the competitiveness of nations and their technological level. Key words: economies, innovation, competitiveness, public policy, business strategies.

Medidas de dispersão de gás em células mecânicas industriais e seus condicionantes.

A qualidade da dispersão de gás em células de flotação é comumente caracterizada através de parâmetros como velocidade superficial do gás (Jg), hold-up do gás (?g), distribuição de tamanho de bolha (db ou D3,2) e fluxo de superfície de bolha (Sb). Sendo um processo de separação de minerais que é dependente da interação (colisão + adesão) entre partículas hidrofóbicas e bolhas de ar, a flotação tem seu desempenho dependente de uma dispersão de gás apropriada na polpa de minério. Desta forma, este trabalho objetivou caracterizar o estado da dispersão de gás de duas células em um banco composto por quatro células Wemco de 42,5 m³ (subaeradas), operando em série na usina da Vale Fertilizantes (Cajati-SP). Realizaram-se três campanhas de medidas que foram conduzidas sob diferentes condições operacionais: a) Diâmetro do rotor (D) de 1,09 m e rotação (N) entre 145 RPM e 175 RPM; b) D = 0,99 m e N entre 110 RPM e 190 RPM; c) D = 0,99 m e N de 120 RPM e de 130 RPM. Observaram-se os seguintes valores de dispersão de gás: 0,7 <= Jg <= 5,4 cm/s, 7 <= ?g <= 15%, 1,6 <= D3,2 <= 2,4 mm e Sb na faixa de 24 a 162 s-1. A magnitude de Jg medida na 1ª e 2ª campanhas mostrou-se acima dos valores reportados pela literatura, indicando necessidade de modificação de condições operacionais dos equipamentos, assim como cuidadosa manutenção. Posteriormente, a 3ª campanha indicou maior conformidade dos parâmetros de dispersão de gás em relação à literatura, constatando-se uma considerável melhora de desempenho do processo de flotação.

Análise de conflitos de usos múltiplos da água auxiliada por simulação computacional: bacia do rio Sapucaí - Mirim/Grande

Na mesma proporção que fontes de água potável são reduzidas, a competição por elas tem aumentado, conseqüência imediata da expansão de áreas urbanas e de novas demandas agro-industriais. Os conflitos gerados por esta competição tendem a comprometer o desenvolvimento sustentável e o progresso de uma forma geral, uma vez que resultam em perda de eficácia para vultuosos investimentos públicos e privados e em prejuízos para os usuários menos estruturados. Considerando os fatos acima, o objeto deste trabalho é o estabelecimento de cenários de alocação das disponibilidades hídricas entre usuários de água da bacia do Sapucaí-Mirim/Grande, visando determinar a convivência harmoniosa das várias finalidades de uso provenientes do mesmo recurso hídrico. Tal meta poderá ser alcançada através da análise dos indicadores de desempenho - confiabilidade, vulnerabilidade e resiliência - do sistema os quais serão obtidos com o auxílio do modelo de simulação IRAS (Interactive River Aquifer Simulation).

A software tool for accurate assessment of costs and CO2 emissions in wood transport using OpenStreetMap©

Costs and environmental impacts are key elements in forest logistics and they must be integrated in forest decision-making. The evaluation of transportation fuel costs and carbon emissions depend on spatial and non-spatial data but in many cases the former type of data are dicult to obtain. On the other hand, the availability of software tools to evaluate transportation fuel consumption as well as costs and emissions of carbon dioxide is limited. We developed a software tool that combines two empirically validated models of truck transportation using Digital Elevation Model (DEM) data and an open spatial data tool, specically OpenStreetMap©. The tool generates tabular data and spatial outputs (maps) with information regarding fuel consumption, cost and CO2 emissions for four types of trucks. It also generates maps of the distribution of transport performance indicators (relation between beeline and real road distances). These outputs can be easily included in forest decision-making support systems. Finally, in this work we applied the tool in a particular case of forest logistics in north-eastern Portugal

European Policy Uses of International Comparisons of Academic Achievement. ACES Working Papers, 2012

International large-scale assessments (ILSAs) and the resulting ranking of countries in key academic subjects have become increasingly significant in the development of global performance indicators and national level reforms in education. As one of the largest international surveys, the Programme for International Student Assessment (PISA) has had a considerable impact on the world of international comparisons of education. Based on the results of these assessments, claims are often made about the relative success or failure of education systems, and in some cases, such as Germany or Japan, ILSAs have sparked national level reforms (Ertl, 2006; Takayama, 2007, 2009). In this paper, I offer an analysis of how PISA is increasingly used as a key reference both for a regional2 entity like the European Union (EU) and for national level performance targets in the example of Spain (Breakspear, 2012). Specifically, the paper examines the growth of OECD and EU initiatives in defining quality education, and the use of both EU benchmarks and PISA in defining the education indicators used in Spain to measure and set goals for developing quality education. By doing so, this paper points to the role of the OECD and the EU in national education systems. It therefore adds to a body of literature pointing to the complex relationship between international, regional, and national education policy spaces (cf. Dale & Robertson, 2002; Lawn & Grek, 2012; Rizvi & Lingard, 2009).

Enhanced biological phosphorus removal in a sequencing batch reactor using propionate as the sole carbon source

An enhanced biological phosphorus removal (EBPR) system was developed in a sequencing batch reactor (SBR) using propionate as the sole carbon source. The microbial community was followed using fluorescence in situ hybridization (FISH) techniques and Candidatus 'Accumulibacter phosphatis' were quantified from the start up of the reactor until steady state. A series of SBR cycle studies was performed when 55% of the SBR biomass was Accumulibacter, a confirmed polyphosphate accumulating organism (PAO) and when Candidatus 'Competibacter phosphatis,' a confirmed glycogen-accumulating organism (GAO), was essentially undetectable. These experiments evaluated two different carbon sources (propionate and acetate), and in every case, two different P-release rates were detected. The highest rate took place while there was volatile fatty acid (VFA) in the mixed liquor, and after the VFA was depleted a second P-release rate was observed. This second rate was very similar to the one detected in experiments performed without added VFA. A kinetic and stoichiometric model developed as a modification of Activated Sludge Model 2 (ASM2) including glycogen economy, was fitted to the experimental profiles. The validation and calibration of this model was carried out with the cycle study experiments performed using both VFAs. The effect of pH from 6.5 to 8.0 on anaerobic P-release and VFA-uptake and aerobic P-uptake was also studied using propionate. The optimal overall working pH was around 7.5. This is the first study of the microbial community involved in EBPR developed with propionate as a sole carbon source along with detailed process performance investigations of the propionate-utilizing PAOs. (C) 2004 Wiley Periodicals, Inc.

Biomolecular engineering at interfaces

A broad review of technologically focused work concerning biomolecules at interfaces is presented. The emphasis is on developments in interfacial biomolecular engineering that may have a practical impact in bioanalysis, tissue engineering, emulsion processing or bioseparations. We also review methods for fabrication in an attempt to draw out those approaches that may be useful for product manufacture, and briefly review methods for analysing the resulting interfacial nanostructures. From this review we conclude that the generation of knowledge and-innovation at the nanoscale far exceeds our ability to translate this innovation into practical outcomes addressing a market need, and that significant technological challenges exist. A particular challenge in this translation is to understand how the structural properties of biomolecules control the assembled architecture, which in turn defines product performance, and how this relationship is affected by the chosen manufacturing route. This structure-architecture-process-performance (SAPP) interaction problem is the familiar laboratory scale-up challenge in disguise. A further challenge will be to interpret biomolecular self- and directed-assembly reactions using tools of chemical reaction engineering, enabling rigorous manufacturing optimization of self-assembly laboratory techniques. We conclude that many of the technological problems facing this field are addressable using tools of modem chemical and biomolecular engineering, in conjunction with knowledge and skills from the underpinning sciences. (c) 2005 Elsevier Ltd. All rights reserved.

Eliminating non-renewable CO2 emissions from sewage treatment: An anaerobic migrating bed reactor pilot plant study

The aim of this work was to demonstrate at pilot scale a high level of energy recovery from sewage utilising a primary Anaerobic Migrating Bed Reactor (AMBR) operating at ambient temperature to convert COD to methane. The focus is the reduction in non-renewable CO2 emissions resulting from reduced energy requirements for sewage treatment. A pilot AMBR was operated on screened sewage over the period June 2003 to September 2004. The study was divided into two experimental phases. In Phase 1 the process operated at a feed rate of 10 L/h (HRT 50 h), SRT 63 days, average temperature 28 degrees C and mixing time fraction 0.05. In Phase 2 the operating parameters were 20 L/h, 26 days, 16 degrees C and 0.025. Methane production was 66% of total sewage COD in Phase 1 and 23% in Phase 2. Gas mixing of the reactor provided micro-aeration which suppressed sulphide production. Intermittent gas mixing at a useful power input of 6 W/m(3) provided satisfactory process performance in both phases. Energy consumption for mixing was about 1.5% of the energy conversion to methane in both operating phases. Comparative analysis with previously published data confirmed that methane supersaturation resulted in significant losses of methane in the effluent of anaerobic treatment systems. No cases have been reported where methane was considered to be supersaturated in the effluent. We have shown that methane supersaturation is likely to be significant and that methane losses in the effluent are likely to have been greater than previously predicted. Dissolved methane concentrations were measured at up to 2.2 times the saturation concentration relative to the mixing gas composition. However, this study has also demonstrated that despite methane supersaturation occurring, microaeration can result in significantly lower losses of methane in the effluent (< 11% in this study), and has demonstrated that anaerobic sewage treatment can genuinely provide energy recovery. The goal of demonstrating a high level of energy recovery in an ambient anaerobic bioreactor was achieved. An AMBR operating at ambient temperature can achieve up to 70% conversion of sewage COD to methane, depending on SRT and temperature. (c) 2006 Wiley Periodicals, Inc.

Feasibility of controlling nitrification in predenitrification plants using DO, pH and ORP sensors

Experimental studies were carried out on a bench-scale nitrogen removal system with a predenitrification configuration to gain insights into the spatial and temporal variations of DO, pH and ORP in such systems. It is demonstrated that these signals correlate strongly with the operational states of the system, and could therefore be used as system performance indicators. The DO concentration in the first aerobic zone, when receiving constant aeration, and the net pH change between the last and first aerobic zones display strong correlations with the influent ammonia concentration for the domestic wastewater used in this study. The pH profile along the aerobic zones gives good indication on the extent of nitrification. The experimental results also showed a good correlation between ORP values in the last aerobic zone and effluent ammonia and nitrate concentrations, provided that DO in this zone is controlled at a constant level. These results suggest that the DO, pH and ORP sensors could potentially be used as alternatives to the on-line nutrient sensors for the control of continuous systems. An idea of using a fuzzy inference system to make an integrated use of these signals for on-line aeration control is presented and demonstrated on the bench-scale system with promising results. The use of these sensors has to date only been demonstrated in intermittent systems, such as sequencing batch reactor systems.

Integrated approach to healthcare quality management:a case study

Purpose - The purpose of the paper is to develop an integrated quality management model, which identifies problems, suggests solutions, develops a framework for implementation and helps evaluate performance of health care services dynamically. Design/methodology/approach - This paper uses logical framework analysis (LFA), a matrix approach to project planning for managing quality. This has been applied to three acute healthcare services (Operating room utilization, Accident and emergency, and Intensive care) in order to demonstrate its effectiveness. Findings - The paper finds that LFA is an effective method of quality management of hospital-based healthcare services. Research limitations/implications - This paper shows LFA application in three service processes in one hospital. However, ideally this is required to be tested in several hospitals and other services as well. Practical implications - In the paper the proposed model can be practised in hospital-based healthcare services for improving performance. Originality/value - The paper shows that quality improvement in healthcare services is a complex and multi-dimensional task. Although various quality management tools are routinely deployed for identifying quality issues in health care delivery and corrective measures are taken for superior performance, there is an absence of an integrated approach, which can identify and analyze issues, provide solutions to resolve those issues, develop a project management framework (planning, monitoring, and evaluating) to implement those solutions in order to improve process performance. This study introduces an integrated and uniform quality management tool. It integrates operations with organizational strategies. © Emerald Group Publishing Limited.

Virtual manufacturing:a study of some important issues relating to the transformation of traditional manufacturing organisations

This thesis starts with a literature review, outlining the major issues identified in the literature concerning virtual manufacturing enterprise (VME) transformation. Then it details the research methodology used – a systematic approach for empirical research. next, based on the conceptual framework proposed, this thesis builds three modules to form a reference model, with the purpose of clarifying the important issues relevant to transforming a traditional manufacturing company into a VME. The first module proposes a mechanism of VME transformation – operating along the VME metabolism. The second module builds a management function within a VME to ensure a proper operation of the mechanism. This function helps identify six areas as closely related to VME transformation: lean manufacturing; competency protection; internal operation performance measurement; alliance performance measurement; knowledge management; alliance decision making. The third module continues and proposes an alliance performance measurement system which includes 14 categories of performance indicators. An analysis template for alliance decision making is also proposed and integrated into the first module. To validate these three modules, 7 manufacturing organisations (5 in China and 2 in the UK) were investigated, and these field case studies are analysed in this thesis. The evidence found in these organisations, together with the evidence collected from the literature, including both researcher views and literature case studies, provide support for triangulation evidence. In addition, this thesis identifies the strength and weakness patterns of the manufacturing companies within the theoretical niche of this research, and clarifies the relationships among some major research areas from the perspective of virtual manufacturing. Finally, the research findings are summarised, as well as their theoretical and practical implications. Research limitations and recommendations for future work conclude this thesis.

Evaluating the impact of institutional logic on the corporate Internet reporting by Egyptian listed companies

This study explores the institutional logic(s) governing the Corporate Internet Reporting (CIR) by Egyptian listed companies. In doing so, a mixed methods approach was followed. The qualitative part seeks to understand the perceptions, believes, values, norms, that are commonly shared by Egyptian companies which engaged in these practices. Consequently, seven cases of large listed Egyptian companies operating in different industries have been examined. Other stakeholders and stockholders have been interviewed in conjunction with these cases. The quantitative part consists of two studies. The first one is descriptive aiming to specify whether the induced logic(s) from the seven cases are commonly embraced by other Egyptian companies. The second study is explanatory aiming to investigate the impact of several institutional and economic factors on the extent of CIR, types of the online information, quality of the websites as well as the Internet facilities. Drawing on prior CIR literature, four potential types of logics could be inferred: efficiency, legitimacy, technical and marketing based logics. In Egypt, legitimacy logic was initially embraced in the earlier years after the Internet inception. latter, companies confronted radical challenges in their internal and external environments which impelled them to raise their websites potentialities to defend their competitive position; either domestically or internationally. Thus, two new logics emphasizing marketing and technical perspectives have emerged, in response. Strikingly, efficiency based logic is not the most prevalent logic driving CIR practices in Egypt as in the developed countries. The empirical results support this observation and show that almost half of Egyptian listed companies 115 as on December 2010 possessed an active website, half of them 62 disclosed part of their financial and accounting information, during December 2010 to February 2011. Less than half of the websites 52 offered latest annual financial statements. Fewer 33(29%) websites provided shareholders and stock information or included a separate section for corporate governance 25 (22%) compared to 50 (44%) possessing a section for news or press releases. Additionally, the variations in CIR practices, as well as timeliness and credibility were also evident even at industrial level. After controlling for firm size, profitability, leverage, liquidity, competition and growth, it was realized that industrial companies and those facing little competition tend to disclose less. In contrast, management size, foreign investors, foreign listing, dispersion of shareholders and firm size provided significant and positive impact individually or collectively. In contrast, neither audit firm, nor most of performance indicators (i.e. profitability, leverage, and liquidity) did exert an influence on the CIR practices. Thus, it is suggested that CIR practices are loosely institutionalised in Egypt, which necessitates issuing several regulative and processional rules to raise the quality attributes of Egyptian websites, especially, timeliness and credibility. Beside, this study highlights the potency of assessing the impact of institutional logic on CIR practices and suggests paying equal attention to the institutional and economic factors when comparing the CIR practices over time or across different institutional environments in the future.

Novel input-output prediction approach for biomass pyrolysis

Biomass pyrolysis to bio-oil is one of the promising sustainable fuels. In this work, relation between biomass feedstock element characteristic and pyrolysis process outputs was explored. The element characteristics considered in this study include moisture, ash, fix carbon, volatile matter, carbon, hydrogen, nitrogen, oxygen, and sulphur. A semi-batch fixed bed reactor was used for biomass pyrolysis with heating rate of 30 °C/min from room temperature to 600 °C and the reactor was held at 600 °C for 1 h before cooling down. Constant nitrogen flow rate of 5 L/min was provided for anaerobic condition. Rice husk, Sago biomass and Napier grass were used in the study to form different element characteristic of feedstock by altering mixing ratio. Comparison between each element characteristic to total produced bio-oil yield, aqueous phase bio-oil yield, organic phase bio-oil yield, higher heating value of organic phase bio-oil, and organic bio-oil compounds was conducted. The results demonstrate that process performance is associated with feedstock properties, which can be used as a platform to access the process feedstock element acceptance range to estimate the process outputs. Ultimately, this work evaluated the element acceptance range for proposed biomass pyrolysis technology to integrate alternative biomass species feedstock based on element characteristic to enhance the flexibility of feedstock selection.