Evaluation de l'application de la PCIME dans un hôpital de pays développé

1.1 Contexte1 Depuis 20 ans, l'OMS (Organisation Mondiale de la Santé) et l'UNICEF (United Nations International Children's Emergency Fund) ont élaboré un programme basé sur l'EBM (evidence Based Medicine) pour aider les pays en voie de développement à diminuer la mortalité infantile dans leur pays. Le succès de la Prise en Charge Intégrée de la Maladie de l'Enfant (PCIME) a permis de l'implanter dans plus de 100 pays en proposant une stratégie sur 3 plans : amélioration des compétences du personnel soignant, amélioration globale du système de santé et amélioration des pratiques familiales et communautaires en matière de santé. 1.2 Objectifs Cette étude évalue l'impact de l'utilisation des arbres décisionnels et des fiches-types de prise en charge proposés par la PCIME dans un hôpital de pays développé tel que l'HEL (Hôpital de l'Enfance). Nous adapterons les modèles pour 2 populations distinctes, le nourrisson âgé de 1 semaine à 2 mois et l'enfant dyspnéique âgé de 2 mois à 5 ans. 1.3 Méthode Dans une première phase, les prises en charge à l'HEL sont analysées par une grille d'évaluation standardisée permettant de les comparer à la prise en charge type PECIME. Les items insuffisamment effectués selon la grille d'évaluation sont présentés aux médecins avec un rappel du rôle de chacun. La seconde partie évalue l'amélioration obtenue dans les prises en charge. Les résultats des deux études vont permettre l'élaboration d'un premier questionnaire et d'une fiche de type check list pour les parents. L'étude évalue deux prises en charge cliniques distinctes. D'une part les nourrissons âgés de 1 semaine à 2 mois et d'autre part les jeunes enfants âgés entre 2 mois et 5 ans qui se présentent avec une dyspnée aux urgences de l'HEL. 1.4 Résultats escomptés Par le biais d'une récolte de données suffisante et d'une formation dispensée entre les deux phases de l'étude, nous nous attendons à une optimisation de la prise en charge des enfants et de leur famille. 1.5 Plus-value escomptée Nous aimerions qu'une telle étude puisse amener des clefs pour une prise en charge complète de l'enfant et de sa famille, en mettant l'accent sur les points essentiels des différentes parties d'une consultation.

Le contrôle glycémique modéré est-il sans danger chez les patients adultes grièvement brûlés? = Is moderate glycemic control safe in major burns? : a 15 year cohort study

Introduction: L'hyperglycémie est un phénomène connu chez les patients gravement agressés, et surtout chez ceux nécessitant un séjour aux soins intensifs, alors que l'hypoglycémie est une complication menaçante. Des valeurs de glycémies anormales sont associées avec une mortalité et morbidité augmentées chez les patients de soins intensifs, y compris les grands brûlés. Des glycémies jusqu'à 15mmol/l ont longtemps été tolérées sans traitement. En 2001, une grande étude randomisée a complètement changé les pratiques du contrôle glycémique aux soins intensifs. Van den Berghe et al. ont montré qu'un contrôle glycémique strict atteint au moyen d'une « intensive insulin therapy » (HT) visant une glycémie 4.1-6.0 mmol/l réduisait la mortalité chez les patients chirurgicaux traités plus que 5. Par la suite plusieurs études contradictoires ont questionné la validité externe de l'étude de Louvain: avec la publication de l'étude « NICE-SUGAR » en 2009 enrôlant plus de 6000 patients cette hypothèse a été réfutée, aboutissant à un contrôle modéré de la glycémie (6-8 mmol/l). Bien que plusieurs études sur le contrôle glycémique aient également inclus quelques patients brûlés, à ce jour il n'y a pas de recommandation ferme concernant la gestion de la glycémie chez les patients brûlés adultes. Le but de l'étude était d'évaluer la sécurité du protocole de contrôle de la glycémie qui avait été introduit aux soins intensifs adultes chez des patients grand brûlés nécessitant un traitement prolongé aux soins intensifs. Méthodes : 11 s'agit d'une étude rétrospective uni-centrique sur des patients brûlés admis aux soins intensifs du CHUV à Lausanne entre de 2000 à juin 2014. Critères d'inclusions : Age >16 ans, brûlures nécessitant un traitement aux soins intensifs >10 jours. Critères d'exclusion : Décès ou transfert hors des soins intensifs <10 jours. Les investigations ont été limitées aux 21 premiers jours de l'hospitalisation aux soins intensifs. Variables : Variables démographiques, surface brûlée (TBSA), scores de sévérité, infections, durée d'intubation, durée du séjour aux soins intensifs, mortalité. Variables métaboliques : Administration totale de glucides, énergie et insuline/2411, valeurs de glycémie artérielle et CRP. Quatre périodes (P) ont été analysées, correspondant à l'évolution du protocole de contrôle de glycémie du service. P1: Avant son introduction (2000-2001) ; P2: Contrôle glycémie serré géré par les médecins (2002-2006) ; P3: Contrôle glycémie serré géré par lés infirmières (2007-2010); P4: Contrôle modéré géré par les infirmières (2011-2014). Les limites glycémiques ont été définis de manière suivante: Hypoglycémie extrême <2.3mmol/l ; hypoglycémie modéré <4.0mmol/l ; hyperglycémie modérée 8.1-10.0mmol/l ; hyperglycémie sévère >10.0mmol/l. Toutes les valeurs de glycémies artérielles ont été extraites depuis le système informatisé des soins intensifs (MetaVision ®). Statistiques: Wilcoxon rank test, Two- way Anova, Tuckey Kramer test, area under the curve (AUC), Spearman's test et odds ratio. STATA 12 1 ' StataCorp, College station, TX, USA and JPM V 10.1 (SAS Institute, Cary, NC, USA). Résultats: Sur les 508 patients brûlés admis durant la période étudiée, 229 patients correspondaient aux critères d'inclusion, âgés de 45±20ans (X±SD) et brûlés sur 32±20% de la surface corporelle. Les scores de sévérité sont restés stables. Au total 28'690 glycémies artérielles ont été analysées. La valeur médiane de glycémie est restée stable avec une diminution progressive de la variabilité intra-patient. Après initiation du protocole, les valeurs normoglycémiques ont augmenté de 34.7% à 65.9% avec diminution des événements hypoglycémiques (pas d'hypoglycémie extrême en P4). Le nombre d'hyperglycémies sévères est resté stable durant les périodes 1 à 3, avec une diminution en P4 (9.25%) : les doses d'insuline ont aussi diminué. L'interprétation des résultats de P4 a été compliquée par une diminution concomitante des apports d'énergie et de glucose (p<0.0001). Conclusions: L'application du protocole destiné aux patients de soins intensifs non brûlés a amélioré le contrôle glycémique chez les patients adultes brûlés, aboutissant à une diminution significative de la variabilité des glycémies. Un contrôle modéré de la glycémie peut être appliqué en sécurité, considérant le nombre très faible d'hypoglycémies. La gestion du protocole par les infirmières s'avère plus sûre qu'un contrôle par les médecins, avec diminution des hypoglycémies. Cependant le nombre d'hyperglycémies reste trop élevé. L'hyperglycémie' n'est pas contrôlable uniquement par l'administration d'insuline, mais nécessite également une approche multifactorielle comprenant une optimisation de la nutrition adaptée aux besoins énergétiques élevés des grands brûlés. Plus d'études seront nécessaire pour mieux comprendre la complexité du mécanisme de l'hyperglycémie chez le patient adulte brûlé et pour en améliorer le contrôle glycémique.

On Transmission System Design for Wireless Broadcasting

This thesis considers aspects related to the design and standardisation of transmission systems for wireless broadcasting, comprising terrestrial and mobile reception. The purpose is to identify which factors influence the technical decisions and what issues could be better considered in the design process in order to assess different use cases, service scenarios and end-user quality. Further, the necessity of cross-layer optimisation for efficient data transmission is emphasised and means to take this into consideration are suggested. The work is mainly related terrestrial and mobile digital video broadcasting systems but many of the findings can be generalised also to other transmission systems and design processes. The work has led to three main conclusions. First, it is discovered that there are no sufficiently accurate error criteria for measuring the subjective perceived audiovisual quality that could be utilised in transmission system design. Means for designing new error criteria for mobile TV (television) services are suggested and similar work related to other services is recommended. Second, it is suggested that in addition to commercial requirements there should be technical requirements setting the frame work for the design process of a new transmission system. The technical requirements should include the assessed reception conditions, technical quality of service and service functionalities. Reception conditions comprise radio channel models, receiver types and antenna types. Technical quality of service consists of bandwidth, timeliness and reliability. Of these, the thesis focuses on radio channel models and errorcriteria (reliability) as two of the most important design challenges and provides means to optimise transmission parameters based on these. Third, the thesis argues that the most favourable development for wireless broadcasting would be a single system suitable for all scenarios of wireless broadcasting. It is claimed that there are no major technical obstacles to achieve this and that the recently published second generation digital terrestrial television broadcasting system provides a good basis. The challenges and opportunities of a universal wireless broadcasting system are discussed mainly from technical but briefly also from commercial and regulatory aspect

Estudio multidisciplinario del ecosistema manglar en la comunidad tradicional de Curral Velho : Estudio sobre la pesca artesanal y análisis de sus diferencias con la acuicultura del camarón

Curral Velho es una comunitat tradicional, situada al nord-est de Brasil, que manté una relació directa amb els ecosistemes que la envolten. La comunitat depèn del estat de conservació del medi natura, ja que obtenen diferents serveis ecositemics. En aquest territori es desenvolupen dos tipus d’economies amb unes bases molt diferents. Una economia tradicional, desenvolupada per la pròpia comunitat, que es basa en la propietat col·lectiva del territori i en optimitzar a llarg termini els beneficis que s’obtenen del medi; y un altre com la camaronicultura, la base de la qual es la obtenció de beneficis a curt termini i amb un territori de propietat privada. Aquesta superposició de models de producció genera impactes ambientals, i un conflicte socio-ambiental entre la comunitat i els que desenvolupen la camaronicultura. L’objectiu es realitzar un estudi econòmic de la pesca artesanal de Curral Velho caracteritzant manera de viure, creant una base de dades sobre pesca artesanal i elaborant indicador de beneficis econòmics generats per la pesca artesanal. Per contextualitzar els resultats es va fer un anàlisis de les dos economies existents a la comunitat. Els resultats obtinguts en primer lloc són que l’economia d’explotació intensiva aporta més guanys per les persones de la comunitat que tenen un relació directa que les que es dediquen a la pesca artesanal, però es important no aturar-se aquí: s’ha de realitzar un anàlisis més profund. Com a conclusió, la activitat pesquera es més rentable a llarg termini ja que els recursos extrets de manera sostenible i així són il·limitats y accessibles a tota la comunitat. A diferència de la camaronicultura, la pesca artesanal no genera desigualtats socials ni vulneracions dels drets humans. Tot el contrari, genera forts vincles entre els individus de la comunitat basats en el treball en equip i l’aprenentatge vivencial e intergeneracional.

Statistical Analysis and Numerics of Heat Exchanger Models

The identifiability of the parameters of a heat exchanger model without phase change was studied in this Master’s thesis using synthetically made data. A fast, two-step Markov chain Monte Carlo method (MCMC) was tested with a couple of case studies and a heat exchanger model. The two-step MCMC-method worked well and decreased the computation time compared to the traditional MCMC-method. The effect of measurement accuracy of certain control variables to the identifiability of parameters was also studied. The accuracy used did not seem to have a remarkable effect to the identifiability of parameters. The use of the posterior distribution of parameters in different heat exchanger geometries was studied. It would be computationally most efficient to use the same posterior distribution among different geometries in the optimisation of heat exchanger networks. According to the results, this was possible in the case when the frontal surface areas were the same among different geometries. In the other cases the same posterior distribution can be used for optimisation too, but that will give a wider predictive distribution as a result. For condensing surface heat exchangers the numerical stability of the simulation model was studied. As a result, a stable algorithm was developed.

Kapillaarielektroforeesin soveltaminen uuttofaasin koostumuksen analysointiin

Työn tarkoituksena oli löytää kapillaarielektroforeesimenetelmä (CE), joka soveltuisi metallien neste-nesteuutossa käytettävien orgaanisten uuttofaasien koostumuksen analysointiin. Kapillaarielektroforeesissa käytetyn elektrolyyttiliuoksen analyytti-kohtaista optimointia ei tässä työssä tehty, vaan liikkeelle lähdettiin fenoleille tarkoitetulla menetelmällä. Tarkasteltavia uuttoreagenssiryhmiä olivat hydroksi-oksiimit sekä fosfiinihappo- ja fosforihappopohjaiset reagenssit. Tutkittavia kaupallisia laimentimia olivat Orfom SX 11 ja Shellsol D70. Lisäksi tutkittiin kahta modifiointiainetta, TOPOa (tri-n-oktyylifosfiinioksidi) ja TXIB:tä (2,2,4-trimetyyli-1,3-pentaanidiolidi-isobutyraatti). Työssä tavoiteltiin kapillaarielektroforeesin hyötyjä erityisesti hydrometallurgisessa teollisuudessa. Suurimpana hyötynä ennakoitiin mahdollisuus analysoida suuria molekyylejä, kuten uuttoreagenssi-metallikomplekseja, joita ei pystytä analysoimaan kaasukromatografilla (GC). Näytteet voidaan myös analysoida ilman hidasta ja usein ei-kvantitatiivista derivatisointia. Kirjallisuudesta ei löytynyt aiempia artikkeleita CE:n soveltamisesta kyseisille aiheille. Kapillaarielektroforeesianalyyseissa pystyttiin esimerkiksi havaitsemaan hydroksi-oksiimin kuparikompleksi orgaanisessa faasissa. Seulonta-ajoissa yleisenä ongelmana oli kuitenkin tulosten heikko toistettavuus. Kapillaari-elektro-foreesi-menetelmä tarjoaa selvästi mahdollisuuksia tulevaisuudessa, mutta vielä sillä ei päästy luotettavaan toistoon sähkökentän häiriöiden ja elektrolyyttiliuoksen riittämättömän optimoinnin vuoksi. Lisäksi teollisissa olosuhteissa käytetyille autenttisille hydroksioksiimi- ja fosfiinihapponäytteille tehtiin perinteisiä kaasukromatografia-analyysejä, joiden perusteella voitiin nähdä uuttofaasin koostumuksen muuttuneen prosessissa. Hapettuminen sekä eri hydrolyysireaktiot ovat tärkeimmät syyt reagenssien ja laimentimien muuttumiselle. Näitä hajoamistuotteita ei tässä työssä onnistuttu analysoimaan kapillaarielektroforeesilla.

Evolution of Bioaffinity Reagents by Phage Display

Antibodies are natural binding proteins produced in vertebrates as a response to invading pathogens and foreign substances. Because of their capability for tight and specific binding, antibodies have found use as binding reagents in research and diagnostics. Properties of cloned recombinant antibodies can be further improved by means of in vitro evolution, combining mutagenesis with subsequent phage display selection. It is also possible to isolate entirely new antibodies from vast naïve or synthetic antibody libraries by phage display. In this study, library techniques and phage display selection were applied in order to optimise binding scaffolds and antigen recognition of antibodies, and to evolve new and improved bioaffinity reagents. Antibody libraries were generated by random and targeted mutagenesis. Expression and stability were mainly optimised by the random methods whereas targeted randomisation of the binding site residues was used for optimising the binding properties. Trinucleotide mutagenesis allowed design of defined randomisation patterns for a synthetic antibody library. Improved clones were selected by phage display. Capture by a specific anti- DHPS antibody was exploited in the selection of improved phage display of DHPS. Efficient selection for stability was established by combining phage display selection with denaturation under reducing conditions. Broad-specific binding of a generic anti-sulfonamide antibody was improved by selection with one of the weakest binding sulfonamides. In addition, p9 based phage display was studied in affinity selection from the synthetic library. A TIM barrel protein DHPS was engineered for efficient phage display by combining cysteinereplacement with random mutagenesis. The resulting clone allows use of phage display in further engineering of DHPS and possibly use as an alternative-binding scaffold. An anti-TSH scFv fragment, cloned from a monoclonal antibody, was engineered for improved stability to better suite an immunoassay. The improved scFv tolerates 8 – 9 °C higher temperature than the parental scFv and should have sufficient stability to be used in an immunoanalyser with incubation at 36 °C. The anti-TSH scFv fragment was compared with the corresponding Fab fragment and the parental monoclonal antibody as a capturing reagent in a rapid 5-min immunoassay for TSH. The scFv fragment provided some benefits over the conventionally used Mab in anayte-binding capacity and assay kinetics. However, the recombinant Fab fragment, which had similar kinetics to the scFv, provided a more sensitive and reliable assay than the scFv. Another cloned scFv fragment was engineered in order to improve broad-specific recognition of sulfonamides. The improved antibody detects different sulfonamides at concentrations below the maximum residue limit (100 μg/kg in EU and USA) and allows simultaneous screening of different sulfonamide drug residues. Finally, a synthetic antibody library was constructed and new antibodies were generated and affinity matured entirely in vitro. These results illuminate the possibilities of phage display and antibody engineering for generation and optimisation of binding reagents in vitro and indicate the potential of recombinant antibodies as affinity reagents in immunoassays.

On the development of object functions and restrictions for shapes made with a turret punch press

This study presents the information required to describe the machine and device resources in the turret punch press environment which are needed for the development of the analysing method for automated production. The description of product and device resources and their interconnectedness is the starting point for method comparison the development of expenses, production planning and the performance of optimisation. The manufacturing method cannot be optimized unless the variables and their interdependence are known. Sheet metal parts in particular may then become remarkably complex, and their automatic manufacture may be difficult or, with some automatic equipment, even impossible if not know manufacturing properties. This thesis consists of three main elements, which constitute the triangulation. In the first phase of triangulation, the manufacture occuring on a turret punch press is examined in order to find the factors that affect the efficiency of production. In the second phase of triangulation, the manufacturability of products on turret punch presses is examined through a set of laboratory tests. The third phase oftriangulation involves an examination of five industry parts. The main key findings of this study are: all possible efficiency in high automation level machining cannot be achieved unless the raw materials used in production and the dependencies of the machine and tools are well known. Machine-specific manufacturability factors for turret punch presses were not taken into account in the industrial case samples. On the grounds of the performed tests and industrial case samples, the designer of a sheet metal product can directly influence the machining time, material loss, energy consumption and the number of tools required on a turret punch press by making decisions in the way presented in the hypothesis of thisstudy. The sheet metal parts to be produced can be optimised to bemanufactured on a turret punch press when the material to be used and the kinds of machine and tool options available are known. This provides in-depth knowledge of the machine and tool properties machine and tool-specifically. None of the optimisation starting points described here is a separate entity; instead, they are all connected to each other.

Virtuaalisen lajittelujärjestelmän hyödyntäminen postipalveluyrityksen tuotannollisessa prosessissa

Työn tavoitteena oli kehittää toimintoperusteista kustannuslaskentaa soveltamalla laskentamalli, jonka avulla on mahdollista tutkia postipalveluyrityksen tuotannollisen prosessin kokonaistuottavuuden kannalta optimaalista tapaa hyödyntää virtuaalista lajittelujärjestelmää. Kimputuksen osalta syntyi teoreettinen laskentamalli, mutta kuljetusyksiköinnin osalta pyrittiin muodostamaan todellista prosessia mahdollisimman hyvin noudattava malli, jonka tuloksia on helppo tutkia erilaisilla kustannus- ja lähetysparametreillä. Virtuaalisen lajittelujärjestelmän tuotannollisen hyödyntämisen ohella työssä oli tarkoitus toteuttaa alustavaa analyysia siitä, millä tapaa järjestelmän avulla voidaan tuottaa myös muuta lisäarvoa postipalvelutuotannolle. Analyysissa havaittiin alustavia hyödyntämismahdollisuuksia palvelutuotannon kuormitussuunnittelun, osoitelaatusidonnaisten toimintojen sekä postiin jätön ja prosessiin ohjauksen osalta. Ottamatta kantaa hyödyntämismahdollisuuksien toteutettavuuteen analyysin keskeinen tulos oli kuitenkin se, että järjestelmän hyödyntämisen osalta tutkimattomia teitä on vielä lukuisia.

Emancipating and developing learning activity: Systemic intervention and re-instrumentation in higher education.

The central theme of this thesis is the emancipation and further development of learning activity in higher education in the context of the ongoing digital transformation of our societies. It was developed in response to the highly problematic mainstream approach to digital re-instrumentation of teaching and studying practises in contemporary higher education. The mainstream approach is largely based on centralisation, standardisation, commoditisation, and commercialisation, while re-producing the general patterns of control, responsibility, and dependence that are characteristic for activity systems of schooling. Whereas much of educational research and development focuses on the optimisation and fine-tuning of schooling, the overall inquiry that is underlying this thesis has been carried out from an explicitly critical position and within a framework of action science. It thus conceptualises learning activity in higher education not only as an object of inquiry but also as an object to engage with and to intervene into from a perspective of intentional change. The knowledge-constituting interest of this type of inquiry can be tentatively described as a combination of heuristic-instrumental (guidelines for contextualised action and intervention), practical-phronetic (deliberation of value-rational aspects of means and ends), and developmental-emancipatory (deliberation of issues of power, self-determination, and growth) aspects. Its goal is the production of orientation knowledge for educational practise. The thesis provides an analysis, argumentation, and normative claim on why the development of learning activity should be turned into an object of individual|collective inquiry and intentional change in higher education, and why the current state of affairs in higher education actually impedes such a development. It argues for a decisive shift of attention to the intentional emancipation and further development of learning activity as an important cultural instrument for human (self-)production within the digital transformation. The thesis also attempts an in-depth exploration of what type of methodological rationale can actually be applied to an object of inquiry (developing learning activity) that is at the same time conceptualised as an object of intentional change within the ongoing digital transformation. The result of this retrospective reflection is the formulation of “optimally incomplete” guidelines for educational R&D practise that shares the practicalphronetic (value related) and developmental-emancipatory (power related) orientations that had been driving the overall inquiry. In addition, the thesis formulates the instrumental-heuristic knowledge claim that the conceptual instruments that were adapted and validated in the context of a series of intervention studies provide means to effectively intervene into existing practise in higher education to support the necessary development of (increasingly emancipated) networked learning activity. It suggests that digital networked instruments (tools and services) generally should be considered and treated as transient elements within critical systemic intervention research in higher education. It further argues for the predominant use of loosely-coupled, digital networked instruments that allow for individual|collective ownership, control, (co-)production, and re-use in other contexts and for other purposes. Since the range of digital instrumentation options is continuously expanding and currently shows no signs of an imminent slow-down or consolidation, individual and collective exploration and experimentation of this realm needs to be systematically incorporated into higher education practise.

Höyryturbiinin käytönaikaisen suorituskyvyn seuranta

Tässä diplomityössä jatkettiin Loviisan voimalaitoksen höyryturbiinien suorituskyvyn parannuspotentiaalien tutkimusta. Tavoitteena oli kehittää laitoksen höyryturbiinien suorituskyvyn käytönaikaisia on-line-mittauksia. Selvityksessä perehdyttiin norjalaisen IFE:n kehittämään stationääritilan TEMPOohjelmaan( The Thermal Performance Monitoring And Optimisation system), sen käyttöohjeisiin ja toimintaperiaatteisiin. Työssä esiteltiin laajasti tiedon yhteensovittamisen laskentateoriaa, johon TEMPOn toiminta perustuu. Työssä tarkasteltiin turbiinin todellista paisuntaprosessia, koska sen ymmärtäminen on tärkeässä osassa turbiinin suorituskyvyn valvonnassa. Tutkimuksessa esiteltiin myös turbiineille mahdollisia vikoja sekä niiden syntymisprosesseja. Työssä tarkasteltiin TEMPOn sovittamien tulostiedostojen analysointiohjelman toimivuutta havaitsemalla itse aiheutettuja poikkeamia todellisiin mittaustiedostoihin. Analysointiohjelmalla muodostettuja kuvaajia vertailtiin todellisen prosessin ajotilanteen kuvaajiin ja tarkasteltiin, kuinka poikkeamia on mahdollista havaita kuvaajien avulla. TEMPO-ohjelmalle löydettiin tutkimuksen edetessä kehittämisehdotuksia. Näillä muutoksilla ohjelma saadaan mallintamaan Loviisan voimalaitoksen turbiiniprosessia tarkemmin ja tuloksista saadaan hyödyllisempiä.

Influence of Link Structure on Search Engine Result Pages of Online Nursery Shops

The primary objective of this thesis is to assess how the backlink portfolio structure and off site Search Engine Optimisation (SEO) elements influence ranking of UK based online nursery shops. The growth of the internet use demanded significant effort from companies to optimize and increase their online presence in order to cope with the increasing online competition. The new e-Commerce technology - called Search Engine Optimisation - has been developed that helped increase website visibility of companies. The SEO process involves on site elements (i.e. changing the parameters of the company's website such as keywords, title tags and meta descriptions) and off site elements (link building and social media marketing activity). Link Building is based on several steps of marketing planning including keyword research and competitor analysis. The underlying goal of keyword research is to understand the targeted market through identifying relevant keyword queries that are used by targeted costumer group. In the analysis, three types (geographic, field and company’s strategy related) and seven sources of keywords has been identified and used as a base of analysis. Following the determination of the most popular keywords, allinanchor and allintitle search has been conducted and the first ten results of the searches have been collected to identify the companies with the most significant web presence among the nursery shops. Finally, Link Profiling has been performed where the essential goal was to understand to what extent other companies' link structure is different that the base company's backlinks. Significant difference has been found that distinguished the top three companies ranking in the allinanchor and allintitle search. The top three companies, „Mothercare”, „Mamas and Papas” and „Kiddicare” maintained significantly better metrics regarding domain and page authority on the main landing pages, the average number of outbound links for link portfolio metric and in number of backlinks. These companies also ranked among the highest in page authority distribution and followed external linking.

Kuljetustensuunnittelu- ja reitinoptimointiohjelmiston kaupallistamiseen vaikuttavat keskeiset ominaisuudet

Ajoneuvojen reititystä on tutkittu 1950-luvulta asti, alunperin etsiessä polttoainekuljetuksille optimaalisinta reittiä varastolta useille palveluasemille. Siitä lähtien ajoneuvon reititystehtäviä on tutkittu akateemisesti ja niistä on muodostettu kymmeniä erilaisia variaatioita. Tehtävien ratkaisumenetelmät jaetaan tyypillisesti tarkkoihin menetelmiin sekä heuristiikkoihin ja metaheuristiikkoihin. Konetehon ja heuristiikoissa käytettävien algoritmien kehittymisen myötä reitinoptimointia on alettu tarjota kaupallisesti. CO-SKY-projektin tavoitteena on kaupallistaa web-pohjainen tai toiminnanohjausjärjestelmään integroitava ajoneuvon reititys. Diplomityössä tutkitaan kuljetustensuunnittelu- ja reitinoptimointiohjelmistojen kaupallistamiseen vaikuttavia keskeisiä ominaisuuksia. Ominaisuuksia on tarkasteltu: 1) erityisesti pk-kuljetusyritysten tarpeiden ja vaatimusten pohjalta, ja 2) markkinoilla olevien ohjelmistojen tarjontaa arvioiden. Näiden pohjalta on myös pyritty arvioimaan kysynnän ja tarjonnan kohtaamista. Pilottiasiakkaita haastattelemalla ohjelmistolle on kyetty asettamaan vaatimuksia, mutta samalla on kuultu käyttäjien mielipiteitä optimoinnista. Lukuisia logistiikkaohjelmistojen tarjoajia on haastateltu logistiikkamessuilla sekä Suomessa että Saksassa. Haastattelujen perusteella on saatu käsitys kyseisistä ohjelmista sekä optimoinnin tarjonnasta että kysynnästä. Akateeminen tutkimus aiheesta on laajaa, koskien niin teknistä toteutusta kuin myös (kysely-)tutkimuksia tarjolla olevien ohjelmistojen ominaisuuksista ja laadusta. Kuljetusyritysten tarpeissa on vaihtelua yritys- ja alakohtaisesti. Perusongelmat ovat samoja, joita reitinoptimoinnin akateemisessa tutkimuksessa käsitellään ja joita kaupalliset ohjelmistot pystyvät ratkaisemaan. Vaikka reitinoptimoinnilla saatavat hyödyt ovat mitattavissa, suunnittelu etenkin pk-yrityksissä tehdään pääosin yhä käsin. Messuhaastattelujen ja loppukäyttäjien mielipiteiden perusteella voidaan todeta kaupallisten ratkaisujen olevan suunniteltu isommille kuljetusyrityksille: tyypillisen it-projektin hinta, käyttöönottoaika ja asennus sekä ratkaisun takaisinmaksuaika vaikuttavat pk-yritysten hankintapäätökseen. Kaupallistamiseen liittyen haasteet liittyvät erityisesti segmentointiin ja markkinointiin asiakasarvon todentamisen ja sen välittämisen kautta.

Geo-enabling repositories - techniques, tools, and challenges

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

LVDC power distribution system: computational modelling

In the doctoral dissertation, low-voltage direct current (LVDC) distribution system stability, supply security and power quality are evaluated by computational modelling and measurements on an LVDC research platform. Computational models for the LVDC network analysis are developed. Time-domain simulation models are implemented in the time-domain simulation environment PSCAD/EMTDC. The PSCAD/EMTDC models of the LVDC network are applied to the transient behaviour and power quality studies. The LVDC network power loss model is developed in a MATLAB environment and is capable of fast estimation of the network and component power losses. The model integrates analytical equations that describe the power loss mechanism of the network components with power flow calculations. For an LVDC network research platform, a monitoring and control software solution is developed. The solution is used to deliver measurement data for verification of the developed models and analysis of the modelling results. In the work, the power loss mechanism of the LVDC network components and its main dependencies are described. Energy loss distribution of the LVDC network components is presented. Power quality measurements and current spectra are provided and harmonic pollution on the DC network is analysed. The transient behaviour of the network is verified through time-domain simulations. DC capacitor guidelines for an LVDC power distribution network are introduced. The power loss analysis results show that one of the main optimisation targets for an LVDC power distribution network should be reduction of the no-load losses and efficiency improvement of converters at partial loads. Low-frequency spectra of the network voltages and currents are shown, and harmonic propagation is analysed. Power quality in the LVDC network point of common coupling (PCC) is discussed. Power quality standard requirements are shown to be met by the LVDC network. The network behaviour during transients is analysed by time-domain simulations. The network is shown to be transient stable during large-scale disturbances. Measurement results on the LVDC research platform proving this are presented in the work.