Motor Types Comparison Determining Efficiency in Pumping Systems

Pumping, fan and compressor systems consume most of the motor electricity power in both the industrial and services sectors. A variable speed drive brings relevant improvements in a fluid system leading to energy saving that further on can be translated into Mtons reduction of CO 2 emissions. Standards and regulations are being adopted for fluid handling systems to limit the less efficiency pumps out of the European market on the coming years and a greater potential in energy savings is dictated by the Energy Efficiency Index (EEI) requirements for the whole pumping system and integrated pumps. Electric motors also have an International Efficiency (IE) classification in order to introduce higher efficiency motors into the market. In this thesis, the applicability of mid-size common electric motor types to industrial pumping system took place comparing the motor efficiency characteristics with each other and by analyzing the effect of motor dimensioning on the pumping system and its impact in the energy consumption.

Evaluation of the Efficiency of Line-Start Permanent-Magnet Machines as a Function of the Operating Temperature

The standard squirrel-cage induction machine has nearly reached its maximum efficiency. In order to further increase the energy efficiency of electrical machines, the use of permanent magnets in combination with the robust design and the line start capability of the induction machine is extensively investigated. Many experimental designs have been suggested in literature, but recently, these line-start permanent-magnet machines (LSPMMs) have become off-the-shelf products available in a power range up to 7.5 kW. The permanent magnet flux density is a function of the operating temperature. Consequently, the temperature will affect almost every electrical quantity of the machine, including current, torque, and efficiency. In this paper, the efficiency of an off-the-shelf 4-kW three-phase LSPMM is evaluated as a function of the temperature by both finite-element modeling and by practical measurements. In order to obtain stator, rotor, and permanent magnet temperatures, lumped thermal modeling is used.

Variable-speed-drive-based detection methods for problems in fluid handling systems

Fluid handling systems account for a significant share of the global consumption of electrical energy. They also suffer from problems, which reduce their energy efficiency and increase life-cycle costs. Detecting or predicting these problems in time can make fluid handling systems more environmentally and economically sustainable to operate. In this Master’s Thesis, significant problems in fluid systems were studied and possibilities to develop variable-speed-drive-based detection methods for them was discussed. A literature review was conducted to find significant problems occurring in fluid handling systems containing pumps, fans and compressors. To find case examples for evaluating the feasibility of variable-speed-drive-based methods, queries were sent to industrial companies. As a result of this, the possibility to detect heat exchanger fouling with a variable-speed drive was analysed with data from three industrial cases. It was found that a mass flow rate estimate, which can be generated with a variable speed drive, can be used together with temperature measurements to monitor a heat exchanger’s thermal performance. Secondly, it was found that the fouling-related increase in the pressure drop of a heat exchanger can be monitored with a variable speed drive. Lastly, for systems where the flow device is speed controlled with by a pressure measurement, it was concluded that increasing rotational speed can be interpreted as progressing fouling in the heat exchanger.

Conception et développement d’un environnement d’apprentissage sur les transformations d’énergies et leurs rendements

Le domaine des énergies est au cœur des préoccupations technologiques, politiques et économiques de notre société moderne. Ce domaine nécessite une compréhension minimale du concept scientifique de l’énergie. Elle est selon nous essentielle à toute formation citoyenne. Nous avons dans un premier temps, à partir de considérations théoriques et pratiques, examiné pourquoi ce domaine si important dans notre société technologique est si peu abordé dans le cursus scolaire québécois? Pourquoi se contente-t-on d’un enseignement théorique et discursif de ce concept? Pourquoi, au contraire de tout enseignement scientifique, n’a-t-on pas envisagé de situations d’apprentissages en laboratoire pour l’étude des énergies? Dans un deuxième temps, nous avons proposé une idée de solution concrète et réaliste pour répondre à l’ensemble de ces questions. Une solution qui invite les élèves à s’investir de manière constructive dans des activités de laboratoire afin de s’approprier ces concepts. Pour ce faire, nous avons conçu des variables globales énergies qui ont permis aux élèves de les mesurer et d’expérimenter facilement des transformations énergétiques. Cette recherche de développement technologique en éducation consiste donc à profiter des nouveaux développements technologiques de l’informatique et de la micro-électronique pour concevoir, réaliser et mettre à l’essai un environnement informatisé d’apprentissage en laboratoire pour les sciences et la technologie. Par ce que l’énergie est au confluent de trois domaines, cet environnement a été conçu pour supporter dans une même activité l’apprentissage des mathématiques, des sciences et de la technologie. Cette intégration recommandée par les nouveaux programmes est, selon nous, essentielle à la compréhension des concepts liés à l’énergie et à ses transformations. Par cette activité d’apprentissage multidisciplinaire, nous voulons, via une approche empirique et concrète, aborder ces problèmes de transformations énergétiques afin de donner aux élèves la capacité de perfectionner les prototypes qu’ils construisent en technologie de manière à améliorer leurs performances. Nous avons montré que cette démarche technoscientifique, assimilable à la conception d’un schème expérimental en sciences, favorise la compréhension des concepts liés aux énergies et à leurs transformations. Ce développement, ouvert à l’investigation scientifique, apporte un bénéfice didactique, non seulement, pour des enseignants en exercices et des étudiants-maîtres, mais aussi pour des élèves de 5ème année du niveau secondaire, ce que nous avons démontré dans une mise à l’essai empirique.

Les dimensions négligées de l'évaluation de la performance : les valeurs et la qualité de vie au travail

L’objet de cette thèse est l’élaboration d’un modèle logique de mesure du maintien des valeurs, ainsi que son opérationnalisation afin d’entreprendre l’évaluation de la performance des systèmes de santé. Le maintien des valeurs est l’une des quatre fonctions de la théorie de l’action sociale de T.Parsons permettant d’analyser les systèmes d’action. Les autres fonctions sont l’adaptation, la production et l’atteinte des buts. Cette théorie est la base du modèle EGIPSS (évaluation globale et intégrée de la performance des systèmes de santé), dans lequel cette thèse s’insère. La fonction étudiée correspond, dans l’oeuvre de T.Parsons, au sous-système culturel. Elle renvoie à l’intangible, soit à l’univers symbolique par lequel l’action prend son sens et les fonctions du système s’articulent. Le modèle logique de mesure du maintien des valeurs est structuré autour de deux concepts principaux, les valeurs individuelles et organisationnelles et la qualité de vie au travail. À travers les valeurs individuelles et organisationnelles, nous mesurons la hiérarchie et l’intensité des valeurs, ainsi que le niveau de concordance interindividuelle et le degré de congruence entre les valeurs individuelles et organisationnelles. La qualité de vie au travail est composée de plusieurs concepts permettant d’analyser et d’évaluer l’environnement de travail, le climat organisationnel, la satisfaction au travail, les réactions comportementales et l’état de santé des employés. La mesure de ces différents aspects a donné lieu à la conception de trois questionnaires et de trente indicateurs. Ma thèse présente, donc, chacun des concepts sélectionnés et leurs articulations, ainsi que les outils de mesure qui ont été construits afin d’évaluer la dimension du maintien des valeurs. Enfin, nous exposons un exemple d’opérationnalisation de ce modèle de mesure appliqué à deux hôpitaux dans la province du Mato Grosso du Sud au Brésil. Cette thèse se conclut par une réflexion sur l’utilisation de l’évaluation comme outil de gestion soutenant l’amélioration de la performance et l’imputabilité. Ce projet comportait un double enjeu. Tout d’abord, la conceptualisation de la dimension du maintien des valeurs à partir d’une littérature abondante, mais manquant d’intégration théorique, puis la création d’outils de mesure permettant de saisir autant les aspects objectifs que subjectifs des valeurs et de la qualité de vie au travail. En effet, on trouve dans la littérature de nombreuses disciplines et de multiples courants théoriques tels que la psychologie industrielle et organisationnelle, la sociologie, les sciences infirmières, les théories sur le comportement organisationnel, la théorie des organisations, qui ont conçu des modèles pour analyser et comprendre les perceptions, les attitudes et les comportements humains dans les organisations. Ainsi, l’intérêt scientifique de ce projet découle de la création d’un modèle dynamique et intégrateur offrant une synthèse des différents champs théoriques abordant la question de l’interaction entre les perceptions individuelles et collectives au travail, les conditions objectives de travail et leurs influences sur les attitudes et les comportements au travail. D’autre part, ce projet revêt un intérêt opérationnel puisqu’il vise à fournir aux décideurs du système de santé des connaissances et données concernant un aspect de la performance fortement négligé par la plupart des modèles internationaux d’évaluation de la performance.

Energy-Efficient Cluster based Routing Schemes for Static and Mobile Sensor Networks

The theme of the thesis is centred around one important aspect of wireless sensor networks; the energy-efficiency.The limited energy source of the sensor nodes calls for design of energy-efficient routing protocols. The schemes for protocol design should try to minimize the number of communications among the nodes to save energy. Cluster based techniques were found energy-efficient. In this method clusters are formed and data from different nodes are collected under a cluster head belonging to each clusters and then forwarded it to the base station.Appropriate cluster head selection process and generation of desirable distribution of the clusters can reduce energy consumption of the network and prolong the network lifetime. In this work two such schemes were developed for static wireless sensor networks.In the first scheme, the energy wastage due to cluster rebuilding incorporating all the nodes were addressed. A tree based scheme is presented to alleviate this problem by rebuilding only sub clusters of the network. An analytical model of energy consumption of proposed scheme is developed and the scheme is compared with existing cluster based scheme. The simulation study proved the energy savings observed.The second scheme concentrated to build load-balanced energy efficient clusters to prolong the lifetime of the network. A voting based approach to utilise the neighbor node information in the cluster head selection process is proposed. The number of nodes joining a cluster is restricted to have equal sized optimum clusters. Multi-hop communication among the cluster heads is also introduced to reduce the energy consumption. The simulation study has shown that the scheme results in balanced clusters and the network achieves reduction in energy consumption.The main conclusion from the study was the routing scheme should pay attention on successful data delivery from node to base station in addition to the energy-efficiency. The cluster based protocols are extended from static scenario to mobile scenario by various authors. None of the proposals addresses cluster head election appropriately in view of mobility. An elegant scheme for electing cluster heads is presented to meet the challenge of handling cluster durability when all the nodes in the network are moving. The scheme has been simulated and compared with a similar approach.The proliferation of sensor networks enables users with large set of sensor information to utilise them in various applications. The sensor network programming is inherently difficult due to various reasons. There must be an elegant way to collect the data gathered by sensor networks with out worrying about the underlying structure of the network. The final work presented addresses a way to collect data from a sensor network and present it to the users in a flexible way.A service oriented architecture based application is built and data collection task is presented as a web service. This will enable composition of sensor data from different sensor networks to build interesting applications. The main objective of the thesis was to design energy-efficient routing schemes for both static as well as mobile sensor networks. A progressive approach was followed to achieve this goal.

Gill Nets of Kerala

The fishing industry the world over is passing through a critical situation.The landings of marine fishes seemed to have reached saturation in major fishing areas of the world.As a general rule fisheries employing fishing gear and techniques used by small scale and artisanal fishermen either from shore or from onboard small fishing craft come under small-scale fisheries.This study on gill nets of Kerala, the fishing method depended upon by maximum fishermen of the state focuses on the importance of this selective and low energy fishing method in the marine fishing sector of the state.The study opens with the conceptual framework by briefly reviewing the crisis in the marine fisheries sector. Maximum fishermen depend upon gill net, which is, an important selective and low energy fishing gear. A review of relevant literature on aspects such as material, selectivity and techno-economic efficiency together with scope and main objectives of the study form the major part of the compass of the introductory chapter.This survey provided the inputs for selection of centres. The chapter presents the basis for selection of sample centres, sample units and methodology for field and experimental study.The subject matter of the fourth chapter is a basic study on gear aterials. The weathering resistance, which is an important criterion to assess the material performance, was studied for polyamide monofilament in comparison to polyamide multifilament and polyethylene twisted monofilament.The study provides supporting evidence of oxidation and characteristic C-O stretching in polyethylene and cyclic lactam .formation and presence of OH in polyamide.The study indicates that small mesh gill netting can be encouraged as a selective fishing method in the inshore waters with restrained use of 30 and 32 mm mesh sizes. The economic efficiency was assessed using standard indices such as rate of return, internal rate of return, pay back period, fishery income, energy efficiency and factor productivity. The effect of size and cost of capital and cost of production on the economics of operation is also discussed in this chapter. It was observed that level of technology did not have direct effect on economic performance.

RMAC-M: Extending the R-MAC Protocol for an Energy Efficient, Delay Tolerant Underwater Acoustic Sensor Network application with a mobile data mule node

One of the major applications of underwater acoustic sensor networks (UWASN) is ocean environment monitoring. Employing data mules is an energy efficient way of data collection from the underwater sensor nodes in such a network. A data mule node such as an autonomous underwater vehicle (AUV) periodically visits the stationary nodes to download data. By conserving the power required for data transmission over long distances to a remote data sink, this approach extends the network life time. In this paper we propose a new MAC protocol to support a single mobile data mule node to collect the data sensed by the sensor nodes in periodic runs through the network. In this approach, the nodes need to perform only short distance, single hop transmission to the data mule. The protocol design discussed in this paper is motivated to support such an application. The proposed protocol is a hybrid protocol, which employs a combination of schedule based access among the stationary nodes along with handshake based access to support mobile data mules. The new protocol, RMAC-M is developed as an extension to the energy efficient MAC protocol R-MAC by extending the slot time of R-MAC to include a contention part for a hand shake based data transfer. The mobile node makes use of a beacon to signal its presence to all the nearby nodes, which can then hand-shake with the mobile node for data transfer. Simulation results show that the new protocol provides efficient support for a mobile data mule node while preserving the advantages of R-MAC such as energy efficiency and fairness.

Student self-assessment a feedback seeking strategy through competence evaluation

There is a body of literature that suggests that student self-assessment is a main goal in higher education (Boud et al., 1995; Tan, 2008); moreover new forms of work organization require a high level of skills and competences. The efforts to deal with competence gaps could be developed at many levels, such as employers, educational institutions, individuals and public agents. Employers could put into practice competence development programs to moderate these gaps. Educational institutions can restructure the curriculum to support students in attaining the competences that are essential in the labour market. Individuals themselves may deploy their resources (time and money) in general or specific competence training. Further, government agencies could fund competence promotion programs. Such challenges for education drive change in learning curricula and method, to properly include the competences required for developing global workers who can move beyond basic competence, to enhanced flexibility and adaptability. In performance assessment methods, there is a shift from the traditional exam-based assessments to more innovative task assessment, which considers performance in multiple different tasks carry out by students. ICTs make it technologically feasible to carry out a complete and complex selfassessment of competences, which provides immediate results to students or other recipients. In the case of students, the evaluation of competences is relevant as developing competences is part - if not all - of the objectives of education. Therefore, it is an important element of the quality of educational organizations (e.g., universities), and of their organizational success. Further, educational organizations may put special emphasis on some differentiating competences, which can be a means of positioning and differentiation from competitors. Competence assessment is an instrument to make students conscious of their strengths and weaknesses, leading to higher motivation to develop their own learning career

La gestión del agua: el desafío chino. Iniciativas medio ambientales chinas y el manejo del río Mekong. Periodo de estudio: 1980 - 2010

El propósito de la presente investigación es evaluar la incidencia regional de las iniciativas chinas a favor de la gestión del agua del Río Mekong como elementos que contribuyen en la construcción de la percepción favorable para el gigante asiático. Producto del conjunto de reformas aplicadas desde 1978, China fue objeto de un crecimiento económico exponencial que algunos académicos denominan milagroso; sin embargo, dicho proceso involucró un impacto negativo sobre el medio ambiente y en particular sobre el agua del Estado. El deterioro ambiental chino implicó, por un lado, el desarrollo de medidas internas que pretenden reversar los efectos descritos en el marco de las diferentes cumbres mundiales sobre medio ambiente y por otro, la participación en iniciativas de carácter subregional que denotan cierto grado de pro-actividad del gigante asiático en materia ambiental.

Multi-agent collaboration for decision support in shared zones of intelligent buildings

In domain of intelligent buildings, saving energy in buildings and increasing preferences of occupants are two important factors. These factors are the important keys for evaluating the performance of work environment. In recent years, many researchers combine these areas to create the system that can change from original to the modern work environment called intelligent work environment. Due to advance of agent technology, it has received increasing attention in the area of intelligent pervasive environments. In this paper, we review several issues in intelligent buildings, with respect to the implementation of control system for intelligent buildings via multi-agent systems. Furthermore, we present the MASBO (Multi-Agent System for Building cOntrol) that has been implemented for controlling the building facilities to reach the balancing between energy efficiency and occupant’s comfort. In addition to enhance the MASBO system, the collaboration through negotiation among agents is presented.

Proceedings of the West Africa Built Environment Research (WABER) Conference 2010

FOREWORD Welcome to this West Africa Built Environment Research (WABER) conference taking place here in Ghana. Thank you for coming and welcome to Accra. The main aims of the WABER conference are: to help young researchers and early-career scholars in West Africa to develop their research work and skills through constructive face-to-face interaction with experienced academics; to provide a platform for networking and collaborative work among senior built environment academics in West Africa; and to serve as a vehicle for developing the field of construction management and economics in Africa. Waber 2009 The WABER event in 2009 was held at the British Council in Accra, Ghana on 2-3 June. The event was a resounding success. It attracted participation from 32 researchers, from 12 different institutions, who presented their work to an audience of approximately 100 people. Each presenter received immediate and constructive feedback from an international panel. The event was opened by Professor K.K. Adarkwa, Vice Chancellor of KNUST, Kumasi, Ghana, with several senior academics and researchers from universities, polytechnics, and other institutions in Ghana and Nigeria in attendance. There was also a significant level of attendance by senior construction practitioners in Ghana. Thank you to the School of Construction Management and Engineering, University of Reading, UK for funding the inaugural event in 2009. We are also grateful to all of you who helped to make the event a success and to those of you who have joined us here today to build upon the success and legacy of WABER 2009. Waber 2010 This year, we have 60+ peer-reviewed papers and presentations on topics relating to Building services and maintenance, Construction costs, Construction design and technology, Construction education, Construction finance, Construction procurement, Contract administration, Contract management, Contractor development, Decision support systems, Dispute resolution, Economic development, Energy efficiency, Environment and sustainability, Health and safety, Human resources, Information technology, Marketing, Materials science, Organisation strategy and business performance, Productivity, Project management, Quantity surveying, Real estate and planning, Solar energy systems, Supply chain management and Urban development. We hope that these papers will generate interest among delagates and stimulate discussion here and beyond the conference into the wider community of academia and industry. The delegates at this conference come from 10 different countries. This provides a rich international and multicultural blend and a perfect platform for networking and developing collaborations. This year we are blessed to have three high profile keynote speakers in the persons of Professor George Ofori (National University of Singapore), Dr Roine Leiringer (University of Reading, UK) and Professor Will Hughes (University of Reading, UK). We are also thankful to Dr Chris Harty (University of Reading, UK) who is facilitating the Research Skills Workshop on ‘Writing a scientific article’. Thank you to Dr Sena Agyepong of our conference organising team for her capable management of local organising arrangements. And above all, thank you to all of you for coming to this conference. Enjoy and have a safe journey back home. Dr Samuel Laryea School of Construction Management and Engineering University of Reading, July 2010

A comparison of energy use in conventional and integrated arable farming systems in the UK

The LINK Integrated Farming Systems (LINK-IFS) Project (1992-1997) was setup to compare conventional and integrated arable farming systems (IAFS), concentrating on practical feasibility and economic viability, but also taking into account the level of inputs used and environmental impact. As part of this, an examination into energy use within the two systems was also undertaken. This paper presents the results from that analysis. The data used is from the six sites within the LINK-IFS Project, spread through the arable production areas of England and from the one site in Scotland, covering the 5 years of the project. The comparison of the energy used is based on the equipment and inputs used to produce I kg of each crop within the conventional and integrated rotations, and thereby the overall energy used for each system. The results suggest that, in terms of total energy used, the integrated system appears to be the most efficient. However, in terms of energy efficiency, energy use per kilogram of output, the results are less conclusive. (C) 2003 Elsevier Science B.V. All rights reserved.

Coordinated management of intelligent pervasive spaces

The content of this paper is a snapshot of a current project looking at producing a real-time sensor-based building assessment tool, and a system that personalises workspaces using multi-agent technology. Both systems derive physical environment information from a wireless sensor network that allows clients to subscribe to real-time sensed data. The principal ideologies behind this project are energy efficiency and well-being of occupants; in the context of leveraging the current state-of-the-art in agent technology, wireless sensor networks and building assessment systems to enable the optimisation and assessment of buildings. Participants of this project are from both industry (construction and research) and academia.

Multi-agent building control in shared environment

Multi-agent systems have been adopted to build intelligent environment in recent years. It was claimed that energy efficiency and occupants' comfort were the most important factors for evaluating the performance of modem work environment, and multi-agent systems presented a viable solution to handling the complexity of dynamic building environment. While previous research has made significant advance in some aspects, the proposed systems or models were often not applicable in a "shared environment". This paper introduces an ongoing project on multi-agent for building control, which aims to achieve both energy efficiency and occupants' comfort in a shared environment.