Organizational configuration, fit and performance: The case of the pharmaceutical industry in Portugal

Miles e Snow’s configurational theory has received a great deal of attention from many investigators. Framing the Miles e Snow Typology with the organizational configuration concept, the main purpose of this paper is to make an empirical evaluation of what configurational theories postulate: higher organizational performance is associated to the resemblance to one of the ideal types defined. However, as it is often assumed that an organization can increase performance by selecting the adjustable hybrid type to its own exogenous environment, the relation between the organization’s effectiveness and the hybrid configuration alignment to the respective specific environment types was also analyzed. The assumption of equifinality was also considered because the configurational theory assumes that all the ideal types can potentially achieve the same performance level. A multiple regression model was made to confirm if the misfit related to the ideal and hybrid types has significant impact on the organizational effectiveness. The analysis of variance and the Kruskal-Wallis test were used to verify the equality of performance between the different organization types. In short, the empirical results obtained confirm what is postulated in the theory.

Microstructural-based approach to the interpretation of clays and transitional soils behaviour

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.

[Map of the city of Washington : showing the sub-divisions, grades, and the general configuration of the ground /

Cadastral map showing lot lines, lot numbers, and block numbers.

Aerodynamic parametric analysis of an unconventional joined-wing aircraft configuration

In this paper, the experimental results of an unconventional joined-wing aircraft configuration are presented. The test model uses two different wings, forward and rear, both joined in tandem and forming diamond shapes both in plant and front views. The wings are joined in such a way that it is possible to change the rear wing dihedral angle values and the rear wing sweep angle values in 25 different positions that modify the relative distance and the relative height between the wings. To measure the system aerodynamic coefficients itis necessary to perform wind tunnel tests. The datapresented corresponds to the lift, drag and induced drag aerodynamic coefficients, as well as the aerodynamic efficiency and the parameter for minimum required power, from the calculated values of the lift and drag time series measured by a 6-axis force and torque sensor. The results show the influence on the aerodynamic coefficients of the rear wing sweep and dihedral angles parameters. As a main result, it can be concluded that, in general terms, the lift and induced drag aerodynamic coefficients values decrease as both the distance and height between the wings increase, on the other hand, the total drag aerodynamic coefficient decreases if the distance between the wings increases, but nevertheless shows a slight tendency to increase if the height of the rear wing increases, whereas the aerodynamic efficiency and the parameter for minimum required power increase if the distance between the wings increases

Direct experimental evidence for a multiparticle-hole ground state configuration of deformed Mg-33

The first direct experimental evidence of a multiparticle-hole ground state configuration of the neutron-rich Mg-33 isotope has been obtained via intermediate energy (400 A MeV) Coulomb dissociation measurement. The major part similar to(70 +/- 13)% of the cross section is observed to populate the excited states of Mg-32 after the Coulomb breakup of Mg-33. The shapes of the differential Coulomb dissociation cross sections in coincidence with different core excited states favor that the valence neutron occupies both the s(1/2) and p(3/2) orbitals. These experimental findings suggest a significant reduction and merging of sd-pf shell gaps at N similar to 20 and 28. The ground state configuration of Mg-33 is predominantly a combination of Mg-32(3.0,3.5MeV; 2(-), 1(-)) circle times nu(s1/2), Mg-32(2.5MeV; 2(+)) circle times nu(p3/2), and Mg-32(0; 0(+)) circle times nu(p3/2). The experimentally obtained quantitative spectroscopic information for the valence neutron occupation of the s and p orbitals, coupled with different core states, is in agreement with Monte Carlo shell model (MCSM) calculation using 3 MeV as the shell gap at N = 20.

Bonding of fiber posts with different cements

Poster presented at the “From Basic Sciences to Clinical Research” - First International Congress of CiiEM. Caparica, Portugal, 27-28 November 2015

Assessment of naproxen adsorption on bone char in aqueous solutions using batch and fixed-bed processes

An integrated analysis of naproxen adsorption on bone char in batch and packed-bed column conditions has been performed. Kinetic, thermodynamic and breakthrough parameters have been calculated using adsorption models and artificial neural networks. Results show that naproxen removal using bone char in batch conditions is a feasible and effective process, which could involve electrostatic and non-electrostatic interactions depending mainly on pH conditions. However, the application of packed-bed column for naproxen adsorption on bone char is not effective for the treatment of diluted solutions due to the low degree of adsorbent utilization (below 4%) at tested operating conditions. The proposed mechanism for naproxen removal using bone char could include a complexation process via phosphate and naproxen, hydrogen bonding and the possibility of hydrophobic interactions via π–π electron. This study highlights the relevance of performing an integrated analysis of adsorbent effectiveness in batch and dynamic conditions to establish the best process configuration for the removal of emerging water pollutants such as pharmaceuticals.

Typologies and spatialization of agricultural production systems in Rondônia, Brazil: linking land use, socioeconomics and territorial configuration.

The current Amazon landscape consists of heterogeneous mosaics formed by interactions between the original forest and productive activities. Recognizing and quantifying the characteristics of these landscapes is essential for understanding agricultural production chains, assessing the impact of policies, and in planning future actions. Our main objective was to construct the regionalization of agricultural production for Rondônia State (Brazilian Amazon) at the municipal level. We adopted a decision tree approach, using land use maps derived from remote sensing data (PRODES and TerraClass) combined with socioeconomic data. The decision trees allowed us to allocate municipalities to one of five agricultural production systems: (i) coexistence of livestock production and intensive agriculture; (ii) semi-intensive beef and milk production; (iii) semi-intensive beef production; (iv) intensive beef and milk production, and; (v) intensive beef production. These production systems are, respectively, linked to mechanized agriculture (i), traditional cattle farming with low management, with (ii) or without (iii) a significant presence of dairy farming, and to more intensive livestock farming with (iv) or without (v) a significant presence of dairy farming. The municipalities and associated production systems were then characterized using a wide variety of quantitative metrics grouped into four dimensions: (i) agricultural production; (ii) economics; (iii) territorial configuration, and; (iv) social characteristics. We found that production systems linked to mechanized agriculture predominate in the south of the state, while intensive farming is mainly found in the center of the state. Semi-intensive livestock farming is mainly located close to the southwest frontier and in the north of the state, where human occupation of the territory is not fully consolidated. This distributional pattern reflects the origins of the agricultural production system of Rondônia. Moreover, the characterization of the production systems provides insights into the pattern of occupation of the Amazon and the socioeconomic consequences of continuing agricultural expansion.

Translation Studies on an Annular Field Reversed Configuration Device for Space Propulsion

This research investigated annular field reversed configuration (AFRC)devices for high power electric propulsion by demonstrating the acceleration of these plasmoids using an experimental prototype and measuring the plasmoid's velocity, impulse, and energy efficiency. The AFRC plasmoid translation experiment was design and constructed with the aid of a dynamic circuit model. Two versions of the experiment were built, using underdamped RLC circuits at 10 kHz and 20 kHz. Input energies were varied from 100 J/pulse to 1000 J/pulse for the 10 kHz bank and 100 J/pulse for the 20 kHz bank. The plasmoids were formed in static gas fill of argon, from 1 mTorr to 50 mTorr. The translation of the plasmoid was accomplished by incorporating a small taper into the outer coil, with a half angle of 2°. Magnetic field diagnostics, plasma probes, and single-frame imaging were used to measure the plasmoid's velocity and to diagnose plasmoid behavior. Full details of the device design, construction, and diagnostics are provided in this dissertation. The results from the experiment demonstrated that a repeatable AFRC plasmoid was produced between the coils, yet failed to translate for all tested conditions. The data revealed the plasmoid was limited in lifetime to only a few (4-10) μs, too short for translation at low energy. A global stability study showed that the plasma suffered a radial collapse onto the inner wall early in its lifecycle. The radial collapse was traced to a magnetic pressure imbalance. A correction made to the circuit was successful in restoring an equilibrium pressure balance and prolonging radial stability by an additional 2.5 μs. The equilibrium state was sufficient to confirm that the plasmoid current in an AFRC reaches a steady-state prior to the peak of the coil currents. This implies that the plasmoid will always be driven to the inner wall, unless it translates from the coils prior to peak coil currents. However, ejection of the plasmoid before the peak coil currents results in severe efficiency losses. These results demonstrate the difficulty in designing an AFRC experiment for translation as balancing the different requirements for stability, balance, and efficient translation can have competing consequences.

Analyse de l'espace comme axe principal dans la configuration du personnage de Juliette Noël dans "Les Amants d'Avignon", d'Elsa Triolet

Repérage et analyse des espaces du roman "Les Amants d'Avignon", d'Elsa Triolet, par rapport à la configuration et l'évolution psychologiques du personnage principal (Juliette Noël) en utilisant les théories exposées dans "La poétique de l'espace" de G. Bachelard.

A Prematuridade na Perspectiva das mães: Estado psicoemocional, autoestima e bonding em mães primíparas e multíparas

A literatura tem referido que a prematuridade do bebé gera nas mães níveis mais elevados de ansiedade, sentimentos depressivos, assim como níveis mais baixos de autoestima, comparativamente com mães de bebés de termo, o que poderá conduzir a um envolvimento emocional mais negativo com o recémnascido. Essa vivência parece variar em função da paridade das mães (i.e., mãe pela primeira vez vs. multípara) não obstante não serem muito claras as particularidades desta variável. Este estudo teve como objetivo analisar num grupo de mães primíparas e multíparas com bebés prematuros, as associações entre o estado Psicoemocional, a Autoestima e o Bonding maternos. Participaram 50 mães (27 primíparas e 23 multíparas), com bebés pré-termo recrutados numa maternidade pública de Lisboa. Os resultados indicam que as mães multíparas apresentam níveis mais elevados de Sentimentos Depressivos expressando, também, uma maior Capacidade e Preparação Geral para a função materna. A Capacidade Geral para tratar do bebé surge associada de forma negativa com o seu estado Psicoemocional e de forma positiva com o Bonding. As associações negativas encontradas entre Ansiedade e Aceitação do bebé, e entre Estado Psicoemocional e Bonding não parecem variar em função da paridade, mostrando que os desafios se colocam a ambos os grupos de mães.

Intégration de pales en céramique dans un rotor de microturbine axiale en configuration renversée

Le marché de l'énergie distribuée est actuellement en pleine expansion et favorise l'intégration d'une multitude de sources d'énergie, et les machines à combustion interne ne sont pas exclues. Les moteurs à piston sont actuellement les principaux acteurs du marché, en raison de leur rendement élevé et de leur faible coût en capital. Cependant, la réglementation de plus en plus sévère sur les émissions ainsi que les coûts liés à la maintenance et les temps d'arrêt sont prohibitifs pour ce type de machines, en particulier dans le segment de basse puissance et de production d’énergie et de chaleur combinées (CHP). C'est là que les microturbines opérant sous le cycle récupéré – de petites turbines à gaz qui produisent moins de 1 MW de puissance – ont un avantage concurrentiel, grâce à moins de pièces en mouvement, une combustion plus propre et une température élevée d'échappement. Les petites turbomachines récupérées doivent atteindre des températures d'entrée de turbine (TIT) très élevées, requises pour atteindre 40% de rendement thermique. Les céramiques non refroidies offrent une solution très attrayante, avec plusieurs essais mais des résultats peu concluants dans la littérature. Ce travail présente une nouvelle architecture qui prend en charge des pales en céramique monolithique dans un environnement d’opération à chaud. La turbine renversée en céramique (ICT) est constituée d'un moyeu métallique flexible qui fournit une base souple pour les pales individuelles en céramique qui sont supportées par l'extérieur par un anneau en composite carbone-polymère. Les forces centrifuges chargent les pales en compression au lieu d’en tension, exploitant ainsi la résistance en compression typiquement élevée des céramiques techniques. Le document présente la validation expérimentale entreprise pour vérifier l'intégrité structurelle d’un prototype de configuration ICT à petite échelle, dans des conditions de fonctionnement à froid et à chaud, ainsi que les étapes qui y ont mené. Les résultats expérimentaux montrent que l'ICT supporte des pales en alumine dans les tests à froid et le nitrure de silicium pour des températures d'entrée du rotor jusqu'à 1000 K, avec des vitesses de pointe de pale atteignant 271 m/s. L’incursion d’objet domestique, l'événement le plus désastreux à se produire dans les turbines en céramique dans la littérature, n'a pas causé de dommages aux pales dans cette configuration. Ces résultats indiquent que l'architecture ICT est robuste et viable, et que le développement peut être poursuivi pour augmenter la TIT et la vitesse de pointe de la turbine, afin d’éventuellement parvenir à une microturbine récupérée en céramique de 1600 K de TIT.