Lessons from the Digital Divide

Peer-reviewed

Mecanização no preparo de amostras por microondas: o estado da arte

This review presents the latest advances of the mechanisation in sample preparation using microwave oven. The fundamental principles of microwaves field interaction with matter are presented, followed by the basic principles of microwave equipment construction. Hyphenation of microwave oven with flow injection analysis or robotic are discussed as well as some metodological difficulties and solutions by its implementation.

Pose-based SLAM with probabilistic scan matching algorithm using a mechanical scanned imaging sonar

This paper proposes a pose-based algorithm to solve the full SLAM problem for an autonomous underwater vehicle (AUV), navigating in an unknown and possibly unstructured environment. The technique incorporate probabilistic scan matching with range scans gathered from a mechanical scanning imaging sonar (MSIS) and the robot dead-reckoning displacements estimated from a Doppler velocity log (DVL) and a motion reference unit (MRU). The proposed method utilizes two extended Kalman filters (EKF). The first, estimates the local path travelled by the robot while grabbing the scan as well as its uncertainty and provides position estimates for correcting the distortions that the vehicle motion produces in the acoustic images. The second is an augment state EKF that estimates and keeps the registered scans poses. The raw data from the sensors are processed and fused in-line. No priory structural information or initial pose are considered. The algorithm has been tested on an AUV guided along a 600 m path within a marina environment, showing the viability of the proposed approach

Multi-sensor Simultaneous Localization and Mapping

Simultaneous localization and mapping(SLAM) is a very important problem in mobile robotics. Many solutions have been proposed by different scientists during the last two decades, nevertheless few studies have considered the use of multiple sensors simultane¬ously. The solution is on combining several data sources with the aid of an Extended Kalman Filter (EKF). Two approaches are proposed. The first one is to use the ordinary EKF SLAM algorithm for each data source separately in parallel and then at the end of each step, fuse the results into one solution. Another proposed approach is the use of multiple data sources simultaneously in a single filter. The comparison of the computational com¬plexity of the two methods is also presented. The first method is almost four times faster than the second one.

Manipulador robótico con visión artificial

En los tiempos que corren la robótica forma uno de los pilares más importantes en la industria y una gran noticia para los ingenieros es la referente a las ventas de estos, ya que en 2013, unos 179.000 robots industriales se vendieron en todo el mundo, de nuevo un máximo histórico y un 12% más que en 2012 según datos de la IFR (International Federation of Robotics). Junto a esta noticia, la robótica colaborativa entra en juego en el momento que los robots y los seres humanos deben compartir el lugar de trabajo sin que nos veamos excluidos por las maquinas, por lo tanto lo que se intenta es que los robots mejoren la calidad del trabajo al hacerse cargo de los trabajos peligrosos, tediosos y sucios que no son posibles o seguros para los seres humanos. Otro concepto muy importante y directamente relacionado con lo anterior que está muy en boga y se escucha desde hace relativamente poco tiempo es el de la fabrica del futuro o “Factory Of The Future” la cual intenta que los operarios y los robots encuentren la sintonía en el entorno laboral y que los robots se consideren como maquinaria colaborativa y no como sustitutiva, considerándose como uno de los grandes nichos productivos en plena expansión. Dejando a un lado estos conceptos técnicos que nunca debemos olvidar si nuestra carrera profesional va enfocada en este ámbito industrial, el tema central de este proyecto está basado, como no podía ser de otro modo, en la robótica, que junto con la visión artificial, el resultado de esta fusión, ha dado un manipulador robótico al que se le ha dotado de cierta “inteligencia”. Se ha planteado un sencillo pero posible proceso de producción el cual es capaz de almacenar piezas de diferente forma y color de una forma autónoma solamente guiado por la imagen capturada con una webcam integrada en el equipo. El sistema consiste en una estructura soporte delimitada por una zona de trabajo en la cual se superponen unas piezas diseñadas al efecto las cuales deben ser almacenadas en su lugar correspondiente por el manipulador robótico. Dicho manipulador de cinemática paralela está basado en la tecnología de cables, comandado por cuatro motores que le dan tres grados de libertad (±X, ±Y, ±Z) donde el efector se encuentra suspendido sobre la zona de trabajo moviéndose de forma que es capaz de identificar las características de las piezas en situación, color y forma para ser almacenadas de una forma ordenada según unas premisas iníciales.

Zonation patterns of benthic communities in an upwelling area from de western Mediterranean (La Herradura, Alboran Sea)

Species composition and distribution of marine benthic communities from La Herradura (Alboran Sea, western Mediterranean) are described to characterise its rocky and sedimentary bottoms bionomically. Rocky bottoms were studied by means of several underwater transects and soft bottoms with fixed stations along a bathymetric gradient. The study of the floristic and faunistic composition of the rocky benthic communities highlights depth as the main axis of variation. Factorial Correspondence Analysis segregates deep-water communities below 25 m depth (circalittoral communities) from shallower communities (axis I), and communities thriving between 5 and 25 m depth (lower infralittoral communities) from communities thriving close to the surface (shallow infralittoral communities) (axis II). The study of the sedimentary bottoms also suggests that depth, together with physical sedimentary properties, is the main axis of variation in species distribution. Floristic and faunistic records show the particular composition of La Herradura benthic communities, compared to Mediterranean and Atlantic ones. Mixing of Mediterranean and Atlantic waters, together with deep water upwelling episodes typical of this area, probably determine the peculiar composition of the benthic communities

Ambient intelligence application based on environmental measurements performed with an assistant mobile robot

This paper proposes the use of an autonomous assistant mobile robot in order to monitor the environmental conditions of a large indoor area and develop an ambient intelligence application. The mobile robot uses single high performance embedded sensors in order to collect and geo-reference environmental information such as ambient temperature, air velocity and orientation and gas concentration. The data collected with the assistant mobile robot is analyzed in order to detect unusual measurements or discrepancies and develop focused corrective ambient actions. This paper shows an example of the measurements performed in a research facility which have enabled the detection and location of an uncomfortable temperature profile inside an office of the research facility. The ambient intelligent application has been developed by performing some localized ambient measurements that have been analyzed in order to propose some ambient actuations to correct the uncomfortable temperature profile.

Els robots s'inspiren en les taràntules

La robòtica està experimentant un gran auge, amb el disseny de màquines cada cop més sofisticades i complexes pel que fa a les funcions que poden dur a terme i a la capacitat d'interacció amb les persones. Molta inspiració ve de la natura. Un dels reptes actuals és optimitzar els sistemes que controlen el moviment de les extremitats perquè permetin ajustar la velocitat i la coordinació de manera precisa i ràpida. Anna N. Ahn i els seus col·laboradors, dels departaments de biologia i d'enginyeria del Pitzer College i del Harvey Mudd College de Claremont, als EUA, han proposat un sistema de control basat en el moviment de les extremitats de les aranyes. Concretament, han estudiat la locomoció hidràulica de les taràntules, que es veu afectada per la temperatura, segons han publicat a The Journal of Experimental Biology.

Natural Science in the Bothnian Sea During 1975-2008: A Review

The Baltic Sea is one of the most studied areas in the world. However, parts of its northernmost reach, the Bothnian Sea, seem to be under represented in the natural scientific literature compared to other parts of the Baltic. The Bothnian Sea represents a unique inland sea environment for the scientific community to study due to its shallowness and low salinity. The natural sciences research carried out on the Bothnian Sea has been reviewed between 1975 and 2008. This time period was chosen to continue on from an earlier review paper ending in 1974. Along with the number of papers published the goal was also to review the content of the papers, indentifying dominating themes to evaluate gaps in the current knowledge on the Bothnian Sea and provide recommendations for topics of future research focus. In a classification into specific research topics biodiversity was the leading research focus followed by chemical and physical oceanography, pollution and toxins, and fish biology and fisheries. The current good condition of the Bothnian Sea is highly valued with its historically less eutrophic and clearer waters when compared to the Baltic. However, today the Bothnian Sea is facing eutrophication resulting from nutrient-rich water transported by the many rivers draining into it from Sweden and Finland making it an area in need of protection and preservation. More human activity will also concentrate on the Bothnian Sea in the future. Therefore the use of the sea and its coastal areas must be planned carefully to minimize the harmful effects of this increasing human activity. To achieve this more information is needed for the basis of Integrated Coastal Zone Management (ICZM) and maritime spatial planning (MSP). For example, for the Bothnian Sea the information on the underwater nature which is essential for ICZM is so far missing to a large extent. Specific biological, chemical and physical oceanographic information is needed to combine with economic analyses and environmental policies regarding this region. More research of a multidisciplinary nature is required on the unique Bothnian Sea environment and this we feel is best achieved through a joint Finnish-Swedish research strategy.

Physical Realization of an Optical Automatic Target Recognition System

In the modern warfare there is an active development of a new trend connected with a robotic warfare. One of the critical elements of robotics warfare systems is an automatic target recognition system, allowing to recognize objects, based on the data received from sensors. This work considers aspects of optical realization of such a system by means of NIR target scanning at fixed wavelengths. An algorithm was designed, an experimental setup was built and samples of various modern gear and apparel materials were tested. For pattern testing the samples of actively arm engaged armies camouflages were chosen. Tests were performed both in clear atmosphere and in the artificial extremely humid and hot atmosphere to simulate field conditions.

Joustavan särmäyssolun kehittäminen

Tässä diplomityössä esitellään robotisoinnin teoria ja robottisolun oheislaitteet, vaihtoehdot, toiminta ja turvallisuus. Joustavalla tuotantosolulla tarkoitetaan automaattista valmistusjärjestelmää, jossa on useita toisiinsa liitettyjä koneita yhteisellä ohjausjärjestelmällä. Solun komponentteja ovat tuotantolaitteet ja -koneet, ohjausjärjestelmät, valvontalaitteet ja anturit, toimi- ja säätölaitteet sekä ohjelmointijärjestelmä. Joustavaa tuotantosolua voidaan kehittää tehostamalla työntekijöiden koulutusta, ohjelmointia, asetusten tekemistä ja layouttia. Diplomityöhön liittyvä kehitystehtävä koskee heinäveteläisen alihankintakonepajan, Metalliset Oy:n, tuotannon tehostamista robotisoinnin avulla. Metalliset Oy:n joustavan särmäyssolun kehittämiskeinoiksi valittiin nykyisen järjestelmän tehostaminen, uuden tuotantosolun luominen olemassa olevia laitteita hyödyntäen ja tulevaisuuden tuotantosolun kehittäminen. Vertailussa parhaimmaksi osoittautui uuden tuotantosolun luominen olemassa olevia laitteita hyödyntäen.

Uuden robottisolun ohjelmointitavan mahdollisuudet pienille ja keskisuurille yrityksille

Robotin ohjelmointi on aikaa vievää ja tarvitsee robotin ohjelmoinnin tuntevan operaattorin toimimaan robotin opettajana. Saadakseen robottisolun kustannustehokkaaksi operaattorilla olisi hyvä olla useampi solu hoidettavanaan samaan aikaan. Tämä ei ole suuri ongelma suurille yrityksille, joissa voi olla kymmeniä robottisoluja. Jos kyseessä on pieni tai keskisuuri yritys, automatisointi-investointi voi jäädä tekemättä ohjelmoinnin vaikeuden aiheuttaman ongelman vuoksi. Diplomityössä keskityttiin tutkimaan robotisointia pienten ja keskisuurten yritysten kannalta. Teoriaosassa on keskitytty robottisolun suunnittelun kannalta tarvittaviin perustietoihin robotin rakenteesta, ohjausjärjestelmästä, ohjelmoinnista sekä turvallisuudesta. Näiden perustietojen lisäksi on huomioitu hitsauksen automatisointia sekä taluttamalla ohjelmoitavan robottisolun tekninen konsepti. Taluttamalla ohjelmoitavan robottisolun konseptin käsittelyosassa on myös perehdytty taluttamalla ohjelmoinnin vaatimiin komponentteihin kuten voima/vääntö-anturi. Robottisolun suunnittelu on tehtävä koneasetuksen vaatimusten mukaan. Turvallisuus osiossa on käsitelty koneasetuksen vaatimuksia koneensuunnittelulle ja käytännön osassa on käsitelty Winnovan taluttamalla ohjelmoitavan robottisolun suunnittelua koneasetuksen ohjeiden mukaan. Käytännön osassa on tutkittu taluttamalla ohjelmoinnin tuomia etuja muihin ohjelmointimenetelmiin nähden sekä suoritettu investointilaskelmat taluttamalla ohjelmoitavasta ja opettamalla ohjelmoitavasta robottisolusta. Koetuloksista nähdään taluttamalla ohjelmoinnin olevan nopeampi ja yksinkertaisempi tapa ohjelmoida robottia kuin opettamalla ohjelmointi. Investointilaskelmien vertailusta nähdään taluttamalla ohjelmoinnin tulevan opettamalla ohjelmointia edullisemmaksi vaihtoehdoksi käyttökustannusten edullisuuden ansiosta.

Mobile Teleoperation of a Mobile Robot

This thesis describes the design and implementation of a graphical application on a mobile device to teleoperate a mobile robot. The department of information technology in Lappeenranta University conducts research in robotics, and the main motivation was to extend the available teleoperation applications for mobile devices. The challenge was to port existing robot software library onto an embedded device platform, then develop a suitable user interface application that provides sufficient functionality to perform teleoperation tasks over a wireless communication network. This thesis involved investigating previous teleoperation applications and conducted similar experiments to test and evaluate the designed application for functional activity and measure performance on a mobile device which have been identified and achieved. The implemented solution offered good results for navigation purposes particularly for teleoperating a visible robot and suggests solutions for exploration when no environment map for the operator is present.

Learning Robot Environment through Simulation

Traditionally simulators have been used extensively in robotics to develop robotic systems without the need to build expensive hardware. However, simulators can be also be used as a “memory”for a robot. This allows the robot to try out actions in simulation before executing them for real. The key obstacle to this approach is an uncertainty of knowledge about the environment. The goal of the Master’s Thesis work was to develop a method, which allows updating the simulation model based on actual measurements to achieve a success of the planned task. OpenRAVE was chosen as an experimental simulation environment on planning,trial and update stages. Steepest Descent algorithm in conjunction with Golden Section search procedure form the principle part of optimization process. During experiments, the properties of the proposed method, such as sensitivity to different parameters, including gradient and error function, were examined. The limitations of the approach were established, based on analyzing the regions of convergence.

Design and development of the architecture of an agricultural mobile robot

Parameters such as tolerance, scale and agility utilized in data sampling for using in Precision Agriculture required an expressive number of researches and development of techniques and instruments for automation. It is highlighted the employment of methodologies in remote sensing used in coupled to a Geographic Information System (GIS), adapted or developed for agricultural use. Aiming this, the application of Agricultural Mobile Robots is a strong tendency, mainly in the European Union, the USA and Japan. In Brazil, researches are necessary for the development of robotics platforms, serving as a basis for semi-autonomous and autonomous navigation systems. The aim of this work is to describe the project of an experimental platform for data acquisition in field for the study of the spatial variability and development of agricultural robotics technologies to operate in agricultural environments. The proposal is based on a systematization of scientific work to choose the design parameters utilized for the construction of the model. The kinematic study of the mechanical structure was made by the virtual prototyping process, based on modeling and simulating of the tension applied in frame, using the.