Applications of Microwave Antenna Array for Wireless Power Transmission and Radar Imaging in Complex Environment

Thesis (Ph.D.)--University of Washington, 2016-08

The status of weed biological control in Vanuatu

Biological control of weeds in Vanuatu began in 1935, with the introduction of the tingid Teleonemia scrupulosa to control Lantana camara. To date, nine biological control agents have been intentionally introduced to control eight weed species. Seven of these agents have established on their respective hosts while an eighth, Zygogramma bicolorata, an agent for Parthenium hysterophorus has only recently been released and establishment is unlikely. The fate of a ninth agent, Heteropsylla spinulosa, released for the control of Mimosa diplotricha is unclear. Six other biological control agents, including Epiblema strenuana which was first detected in 2014 on P. hysterophorus on Efate have spread into the country unintentionally. Control of the target weeds range from inadequate to very good. By far the most successful agent has been Calligrapha pantherina which was introduced to control Sida acuta and Sida rhombifolia. The beetle was released on 14 islands and managed to spread to at least another 10 islands where it has effectively controlled both Sida spp. Control of the two water weeds, Eichhornia crassipes by Neochetina bruchi and N. eichhorniae and Pistia stratiotes by Neohydronomus affinis, has also been fairly good in most areas. Two agents, T. scrupulosa and Uroplata girardi, were released on L. camara, and four other agents have been found on the weed, but L. camara is still not under adequate control. The rust Puccinia spegazzinii was first released on Mikania micrantha in 2012 and successfully established. Anecdotal evidence suggests that it is having an impact on M. micrantha, but detailed monitoring is required to determine its overall impact. Future prospects for weed biological control in Vanuatu are positive, with the expected greater spread of recently released agents and the introduction of new agents for P. hysterophorus, L. camara, Dolichandra unguis-cati and Spathodea campanulata.

Biological control of weeds in the 22 Pacific island countries and territories: current status and future prospects

Biological control of introduced weeds in the 22 Pacific island countries and territories (PICTs) began in 1911, with the lantana seed-feeding fly introduced into Fiji and New Caledonia from Hawaii. To date, a total of 62 agents have been deliberately introduced into the PICTs to control 21 weed species in 17 countries. A further two agents have spread naturally into the region. The general impact of the 36 biocontrol agents now established in the PICTs ranges from none to complete control of their target weed(s). Fiji has been most active in weed biocontrol, releasing 30 agents against 11 weed species. Papua New Guinea, Guam, and the Federated States of Micronesia have also been very active in weed biocontrol. For some weeds such as Lantana camara, agents have been released widely, and can now be found in 15 of the 21 PICTs in which the weed occurs. However, agents for other commonly found weeds, such as Sida acuta, have been released in only a few countries in which the weed is present. There are many safe and effective biocontrol agents already in the Pacific that could be utilised more widely, and highly effective agents that have been released elsewhere in the world that could be introduced following some additional host specificity testing. This paper discusses the current status of biological control efforts against introduced weeds in the 22 PICTs and reviews options that could be considered by countries wishing to initiate weed biological control programmes.

Comparison of growth traits between abundant and uncommon forms of a non-native vine, Dolichandra unguis-cati (Bignoniaceae) in Australia

Cat’s claw creeper vine, Dolichandra unguis-cati (L.) Lohmann (syn. Macfadyena unguis-cati (L.) Gentry) (Bignoniaceae), is a major environmental weed in Australia. Two distinct forms of this weed (‘long’ and ‘short’ pod), with differences in leaf morphology and fruit size, occur in Australia. The long pod form has only been reported in less than fifteen localities in the whole of south-east Queensland, while the short pod form is widely distributed in Queensland and New South Wales. This study sought to compare growth traits such as specific leaf area, relative growth rate, stem length, shoot/root ratio, tuber biomass and branching architecture between these forms. These traits were monitored under glasshouse conditions over a period of 18 months. Short pod exhibited higher values of relative growth rates, stem length, number of tubers and specific leaf area than long pod, but only after 10 months of plant growth. Prior to this, long and short pod did not differ significantly. Higher values for these traits have been described as characteristics of successful colonizers. Results from this study could partly explain why the short pod form is more widely distributed in Australia while long pod is confined to a few localities.

Social/economic costs and health-related quality of life in patients with epidermolysis bullosa in Europe

BACKGROUND: The aim of this study was to determine the social/economic costs and health-related quality of life (HRQOL) of patients with epidermolysis bullosa (EB) in eight EU member states. METHODS: We conducted a cross-sectional study of patients with EB from Bulgaria, France, Germany, Hungary, Italy, Spain, Sweden and the United Kingdom. Data on demographic characteristics, health resource utilisation, informal care, labour productivity losses, and HRQOL were collected from the questionnaires completed by patients or their caregivers. HRQOL was measured with the EuroQol 5-domain (EQ-5D) questionnaire. RESULTS: A total of 204 patients completed the questionnaire. Average annual costs varied from country to country, and ranged from euro9509 to euro49,233 (reference year 2012). Estimated direct healthcare costs ranged from euro419 to euro10,688; direct non-healthcare costs ranged from euro7449 to euro37,451 and labour productivity losses ranged from euro0 to euro7259. The average annual cost per patient across all countries was estimated at euro31,390, out of which euro5646 accounted for direct health costs (18.0 %), euro23,483 accounted for direct non-healthcare costs (74.8 %), and euro2261 accounted for indirect costs (7.2 %). Costs were shown to vary across patients with different disability but also between children and adults. The mean EQ-5D score for adult EB patients was estimated at between 0.49 and 0.71 and the mean EQ-5D visual analogue scale score was estimated at between 62 and 77. CONCLUSION: In addition to its negative impact on patient HRQOL, our study indicates the substantial social/economic burden of EB in Europe, attributable mostly to high direct non-healthcare costs.

Increasing the Visibility of Digital Newspapers Using Wikipedia

Presentation from the MARAC conference in Baltimore, MD on October 16–18, 2014. S15 - Wikipedia: Getting Involved and Increasing Discoverability.

Analysis of β-tricalcium phosphate granules prepared with different formulations by nano-computed tomography and scanning electron microscopy

International audience

Report of the Working Group on Introductions and Transfers of Marine Organisms (WGITMO). 16-18 March 2016 Olbia, Italy

The 42th meeting of the ICES Working Group on Introductions and Transfers of Marine Organisms (WGITMO) was held in Olbia, Italy, 16–18 March 2016, with Anna Occhipinti-Ambrogi as host and Henn Ojaveer as chairperson. Representatives from 19 countries participated in the meeting. Attendants were from Belgium, Canada, Dennark, Estonia, Finland, France, Germany, Ireland, Israel, Italy, Lithuania, Norway, Poland, Portugal, Russia, Spain, Sweden, United Kingdom and United States. Sweden contributed by cor-respondence. The objectives of the meeting were to update information and discuss several aspects related to the introductions and transfers of non-indigenous aquatic species. Data and information management were two of the discussion topics of the meeting, with special focus on the better exploitation of the ‘Information system on aquatic non-indigenous and cryptogenic species’ (AquaNIS). The WGITMO also dedicated time for addressing the MSFD D2 issues: indicator on new non-indigenous species introduced by human activities, and opportunities and problems related to cross-regional comparison of non-indigenous species indicators. Preparation of the manuscript of the alert report on sea squirt Didemnum vexillum, which is to be published in ICES CRR series, was discussed and the steps to be taken to finalise the report were agreed. As usual, adequate time was devoted to discuss national reports, to exchange of information on the management of NIS and to review ongoing and planned research activities. The approach taken during the meeting facilitated presentations and discussions on the issues of relevance related to the Terms of References as well as on a few generic and strategically-important issues of general relevance to bioinvasions. The meeting began with a full-day joint meeting with the Working Group on Ballast and Other Ship Vectors (WGBOSV), which provided an opportunity to discuss and address issues of common interest, such as shipping and biofouling as introduction vectors. The proposed ICES demonstration advice on ‘Risk management of non-indigenous species associated with shipping in the Arctic’ was discussed, and edits were suggested for both the orientation of the demonstration advice as well as for the exact questions to be asked. Both working groups agreed that the practice of conducting back-to-back meetings with one joint day is useful and will continue in 2017. All Terms of References to be addressed for 2016 were discussed. For some Terms of Ref-erence, more detailed presentations were given, and a short overview of the information and subsequent discussion is provided herein at the end of each section. This report is structured so that each Term of Reference is dealt with in sequential order. The main body of the report contains summaries of the presentations and discussions with the more detailed documents being contained in the Annexes. WGITMO progressed each of the Terms of Reference by either completing the task or clearly identifying and agreeing on the inter-sessional activities required to still finalise the work in 2016. From 2017, WGITMO will be shifted to multi-annual management.

Comparison of two methods for measuring the pubococcygeal line from sagittal-plane magnetic resonance imaging

Aims The pubococcygeal line (PCL) is an important reference line for determining measures of pelvic organ support on sagittal-plane magnetic resonance imaging (MRI); however, there is no consensus on where to place the posterior point of the PCL. As coccyx movement produced during pelvic floor muscle (PFM) contractions may affect other measures, optimal placement of the posterior point is important. This study compared two methods for measuring the PCL, with different posterior points, on T2-weighted sagittal MRI to determine the effect of coccygeal movement on measures of pelvic organ support in older women. Methods MRI of the pelvis was performed in the midsagittal plane, at rest and during PFM contractions, on 47 community-dwelling women 60 and over. The first PCL was measured to the tip of the coccyx (PCLtip) and the second to the sacrococcygeal joint (PCLjnt). Four measures of pelvic organ support were made using each PCL as the reference line: urethrovesical junction height, uterovaginal junction height, M-line and levator plate angle. Results During the PFM contraction the PCLtip shortened and lifted (P < 0.001); the PCLjnt did not change (P > 0.05). The changes in the four measures of pelvic organ support were smaller when measured relative to the PCLtip as compared to those to the PCLjnt (P < 0.001). Conclusions Coccyx movement affected the length and position of the PCLtip, which resulted in underestimates of the pelvic-organ lift produced by the PFM contraction. Therefore, we recommend that the PCL be measured to the sacrococcygeal joint and not to the tip of the coccyx

Spatial variability of soil properties and yield of a grazed alfalfa pasture in Brazil.

2016

Production of Recombinant Trichoderma Reesei Endoglucanase Protein CEL7B by Using Kluyveromyces Lactis

This research is about producing recombinant Trichoderma reesei endoglucanase Cel7B by using Kluyveromyces lactis, transformed with chromosomally integrated Cel7B cDNA, as a host cell (K. lactis Cel7B). Cel7B is one of the glycoside hydrolyze family of proteins that are produced by T. reesei. Cel7B together with other endoglucanases, exoglucanases, and â-glucosidases hydrolyze cellulose to glucose, which can then be fermented to biofuels or other value-added products. The research objective of this MS project is to examine favorable fermentation conditions for recombinant Cel7B enzyme production and improved activity. Production of enzyme on different types of media was examined, and the activity of the enzyme was measured by using different tools or procedures. The first condition tested for was using different concentrations of galactose as a carbon and energy source; however galactose also acts as a potent promoter of recombinant Cel7B expression in K. lactis Cel7B. The purpose of this method is to determine the relationship between production of enzyme with increasing sugar concentration. The second culture condition test was using different types of media: a complex medium-yeast extract, peptone, galactose (YPGal); a minimal medium-yeast nitrogen base (YNB) with galactose; and a minimal medium with supplement-yeast nitrogen base with casamino acid (YBC), a nitrogen source, with galactose. The third condition was using different types of reactors or fermenters: a small reactor (shake flask) and a larger automated bioreactor (BioFlo 3000 fermenter). The purpose of this method is to determine the quantity of the protein produced by using different environments of production. Different tools to determine the presence and activity of Cel7B enzyme were used. For the presence of enzyme, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) was used. Secondly, to detect enzyme activity, the carboxymethyl cellulose- 3,5-dinitrosalicylic acid (CMC- DNS) assay was employed. SDS-PAGE showed that the enzyme band was at 67 kDa, which is larger than native Cel7B (52 kDa.), likely due to over glycolylation during post-translational processing in K. lactis. For the different types of media used in our fermentation, recombinant Cel7B was produced from yeast extract peptone galactose (YPGal), and yeast nitrogen base with casamino acid (YBC), but was not produced and no activity was detected from yeast nitrogen base (YNB). This experiment concluded that the Cel7B production requires the amino acid resources as part of fermentation medium. In experiments where recombinant Cel7B net activity was measured at 1% galactose initial concentration in YPGal and YBC media, higher enzyme activity was detected for the complex medium YPGal. Higher activity of recombinant Cel7B was detected for flask culture in 2% galactose compared to 1% galactose for YBC medium. Two bioreactor experiments were conducted under these culture conditions at 30°C, pH 7.0, dissolved oxygen of 50% of saturation, and 250 rpm agitation (variable depending on DO control) K. lactis-Cel7B yeast growth curves were quite reproducible with maximum optical density (O.D) at 600 nm of between 7 and 8 (when factoring dilution of 10:1). Galactose was consumed rapidly during the first 15 hours of bioreactor culture and recombinant Cel7B started to appear in the culture at 10-15 hours and increased thereafter up to a maximum of between 0.9 and 1.6 mg/mL/hr in these experiments. These bioreactor enzyme activity results are much higher than comparable experiments conducted with flask-scale culture (0.5 mg/mL/hr). In order to achieve the highest recombinant Cel7B activity from batch culture of K. lactis-Cel7B, based on this research it is best to use a complex medium, 2% initial galactose concentration, and an automated bioreactor where good control of temperature, pH, and dissolved oxygen can be achieved.

The significant role of third-party logistics (3pl) operators as fosterers of organizational performance in colombian companies

La eliminación de barreras entre países es una consecuencia que llega con la globalización y con los acuerdos de TLC firmados en los últimos años. Esto implica un crecimiento significativo del comercio exterior, lo cual se ve reflejado en un aumento de la complejidad de la cadena de suministro de las empresas. Debido a lo anterior, se hace necesaria la búsqueda de alternativas para obtener altos niveles de productividad y competitividad dentro de las empresas en Colombia, ya que el entorno se ha vuelto cada vez más complejo, saturado de competencia no sólo nacional, sino también internacional. Para mantenerse en una posición competitiva favorable, las compañías deben enfocarse en las actividades que le agregan valor a su negocio, por lo cual una de las alternativas que se están adoptando hoy en día es la tercerización de funciones logísticas a empresas especializadas en el manejo de estos servicios. Tales empresas son los Proveedores de servicios logísticos (LSP), quienes actúan como agentes externos a la organización al gestionar, controlar y proporcionar actividades logísticas en nombre de un contratante. Las actividades realizadas pueden incluir todas o parte de las actividades logísticas, pero como mínimo la gestión y ejecución del transporte y almacenamiento deben estar incluidos (Berglund, 2000). El propósito del documento es analizar el papel de los Operadores Logísticos de Tercer nivel (3PL) como promotores del desempeño organizacional en las empresas colombianas, con el fin de informar a las MIPYMES acerca de los beneficios que se obtienen al trabajar con LSP como un medio para mejorar la posición competitiva del país.

Linguistic-discursive analysis of scientific divulgation texts in the contexts of Forensic Sciences

Texts about scientific divulgation have as objective to inform about knowledge from the scientific community. To make this specific discourse, made from scientist to scientist, be understood by the general public, it is necessary do some formals and conceptual modifications in the discourse. In this paper, two texts about forensic sciences were analyzed. One text is from the magazine Ciência Hoje and the other one is from the Superinteressante. It was observed, in the Superinteressante, a major concern about the reformulation and explanation of the scientific terms used in the text. In the other hand, occurrences of authority arguments were bigger in the text from Ciência Hoje. These results are consistent with the communicative purpose of each magazine.