Compilation of scientific results of the OASIS project

Seamounts are of great interest to science, industry and conservation because of their potential role as 'stirring rods' of the oceans, their enhanced productivity, their high local biodiversity, and the growing exploitation of their natural resources. This is accompanied by rising concern about the threats to seamount ecosystems, e.g. through over-fishing and the impact of trawling. OASIS described the functioning characteristics of seamount ecosystems. OASIS' integrated hydrographic, biogeochemical and biological information. Based on two case studies. The scientific results, condensed in conceptual and mass balanced ecosystem models, were applied to outline a model management plan as well as site-specific management plans for the seamounts investigated. OASIS addressed five main objectives: Objective 1: To identify and describe the physical forcing mechanisms effecting seamount systems Objective 2: To assess the origin, quality and dynamics of particulate organic material within the water column and surface sediment at seamounts. Objective 3: To describe aspects of the biodiversity and the ecology of seamount biota, to assess their dynamics and the maintenance of their production. Objective 4: Modelling the trophic ecology of seamount ecosystems. Objective 5: Application of scientific knowledge to practical conservation.

Raster grids detailing the benthic environment of South Georgia

This dataset contains raster grids in GeoTIFF format describing the benthic environment of South Georgia. The data include topographic layers that are directly calculated from a bathymetry grid (Slope, Aspect, Roughness, Slope, Terrain Ruggedness Index, Topographic Position Index). A benthic classification of the area is included, based on topographic layers. Also included are sea-bed environmental layers that are interpolated from global three dimensional grids (Alkalinity, Apparent Oxygen Utilisation, Omega Aragonite, Omega Calcite, Dissolved Oxygen, Nitrate, pH, Phosphate, Salinity, Silicate, Temperature, and Total CO2). These layers were used to construct a habitat suitability model for Octocorallia. The geographic extent is 43°57'56.65"W - 33°45'38.19"W and 52°47'29.50"S - 56° 9'11.03"S. The spatial resolution is 150m x 150m (except for benthic classification wihch is 450m x 450m). The map projection is EPSG:3762.

Benthic and planktic foraminiferal stable isotope records combined with Nd isotope ratios of ODP Hole 198-1210B

The Pacific Ocean is the largest water body on Earth, and circulation in the Pacific contributed significantly to climate evolution in the latest Cretaceous, the culmination of a period of long-term cooling. Here, we present new high-resolution late Campanian to Maastrichtian benthic and planktic foraminiferal stable isotope data and a neodymium (Nd) isotope record obtained from sedimentary ferromanganese oxide coatings of Ocean Drilling Program Hole 1210B from the tropical Pacific Ocean (Shatsky Rise). These new records resolve 13 million years in the latest Cretaceous, providing insights into changes in surface and bottom water temperatures and source regions of deep to intermediate waters covering the carbon isotope excursions of the Campanian-Maastrichtian Boundary Event (CMBE) and the Mid-Maastrichtian event (MME). Our new benthic foraminiferal d18O and Nd isotope records together with published Nd isotope data show markedly parallel trends across the studied interval over a broad range of bathyal to abyssal water depths interpreted to reflect changes in the intensity of deep-ocean circulation in the tropical Pacific. In particular, we observe a three-million-year-long period of cooler conditions in the early Maastrichtian (72.5 to 69.5 Ma) when a concomitant change toward less radiogenic seawater Nd isotope signatures probably marks a period of enhanced admixture and northward flow of deep waters with Southern Ocean provenance. We suggest this change to have been triggered by intensified formation and convection of deep waters in the high southern latitudes, a process that weakened during the MME (69.5 to 68.5 Ma). The early Maastrichtian cold interval is closely related to the negative and positive carbon isotope trends of the CMBE and MME. The millions-of-years long duration of these carbon cycle perturbations suggests a tectonic forcing of climatic cooling, possibly related to changes in ocean basin geometry and bathymetry.

The Canyon System off Fimbulisen

In der vorliegenden Arbeit werden Daten einer systematischen Vermessung in der Lazarev Sea nahe des Fimbul-Ice-Shelfs (Fimbulisen) genutzt, die während der Expedition ANT XIX-2 mit dem Fächersonarsystem Hydrosweep DS-2 und dem Sedimentecholot Parasound erhoben wurden. Nach kurzer Darstellung der Hintergründe dieser durchgeführten Untersuchungen in dem Messgebiet wird allgemein auf wesentliche Aspekte der Hydroakustik hinsichtlich der Anwendung von Echolotsystemen eingegangen. Schwerpunktmäßig soll dabei der parametrischen Effekt, das Messprinzip parametrischer Sedimentecholote, behandelt werden. Nach anschließender Anführung zweier praktischer Anwendungen hydroakustischer Messverfahren anhand des Hydrosweep DS-2 und des Parasound-Systems wird eingehend deren Positionierung auf FS 'Polarstern' dargestellt, da sich bei der Aufbereitung der Messungen zeigte, dass sich das größte Problem der Daten beider Systeme in der minderwertigen Qualität der Navigationsdaten abzeichnete. Aus den bereinigten Tiefendaten der Fächersonarmessung wird ein digitales Geländemodell (DGM) mit einer Rasterweite von 100 m generiert. Dieses Modell liegt für die weitere Bearbeitung digital und in Form einer bathymetrischen Karte im Maßstab 1:250,000 vor, bei der die Topographie des Canyon-Systems nahe dem Fimbulisen durch Isolinien mit einer Aquidistanz von 50 m dargestellt wird. Die als Ergebnis der prozessierten Parasound-Daten erhaltenen Seismogramme, die gefiltert im digitalen Bildformat mit bekannter Start- und Endposition für einen definierten Tiefenbereich vorliegen, können zusammen mit dem DGM in einem dreidimensionalen Modell dargestellt werden. Dieses in digitaler Form vorliegende Modell kann durch den Nutzer interaktiv durchschritten und die darin enthaltenen Messergebnisse in ihrer Gesamtheit sowie in Detailansichten aus verschiedenen Perspektiven betrachtet werden, was das gegenseitige Verständnis und Einschätzung der Ergebnisse aus den beiden Messverfahren fördert. Diese gemeinsame Darstellungsweise eines digitalen Geländemodells in Kombination mit den Seismogramm-Bildern des Sedimentecholotes Parasound bietet sich auch hinsichtlich einer geologischen Klassifizierung der verschiedenen Echotypen und einer anschließenden Interpretation der Sedimentationsvorgänge in einem flächenhaft vermessenen Gebiet an.

High resolution bathymetric compilation for Potter Cove, WAP, Antarctica, with links to data in ArcGIS format

The bathymetry raster with a resolution of 5 m x 5 m was processed from unpublished single beam data from the Argentine Antarctica Institute (IAA, 2010) and multibeam data from the United Kingdom Hydrographic Office (UKHO, 2012) with a cell size of 5 m x 5 m. A coastline digitized from a satellite image (DigitalGlobe, 2014) supplemented the interpolation process. The 'Topo to Raster' tool in ArcMap 10.3 was used to merge the three data sets, while the coastline represented the 0-m-contour to the interpolation process ('contour type option').

Holocene sedimentation in the Strait of Otranto, Mediterranean Sea

An extensive radiograph study of 24 undisturbed, up to 206-cm long box and gravity cores from the western part of the Strait of Otranto revealed a great variety of primary bedding structures and secondary burrowing features. The regional distribution of the sediments according to their structural, textural, and compositional properties reflects the major morphologic subdivisions of the strait into shelf, slope, and trough bottom (e.g., the bottom of the northern end of the Corfu-Kephallinia Trough, which extends from the northeastern Ionian Sea into the Strait of Otranto): (1) The Apulian shelf (0 to -170m) is only partly covered by very poorly sorted, muddy sands without layering. These relict(?) sands are rich in organic carbonate debris and contain glauconite and reworked (?Pleistocene) ooids. (2) The slope sediments (-170 to -1,000 m) are poorly sorted, sandy muds with a high degree of burrowing. One core (OT 5) is laminated and shows slump structures. An origin of these slumped sediment masses from older deposits higher on the slope was inferred from their abnormal compaction, color, texture, organic content, and mineral composition. (3) Cores from the northern end of the Corfu-Kephallinia Trough (-980 to -1,060 m) display a few graded sand layers, 2-5 cm (maximum 30 cm) thick with parallel and ripple-cross-laminations, deposited by oceanic bottom or small-scale turbidity currents. They are intercalated with homogeneous lutite. (4) Hemipelagic sediments prevail in the more southerly part of the Corfu-Kephallinia Trough and on the "Apulian-Ionian Ridge", the southern submarine extension of the Apulian Peninsula. Below a core depth of 160 cm, these cores have a laminated ("varved") zone, representing an Early Holocene (Boreal-Atlanticum) "stagnation layer" (14C age approximately 9,000 years). The terrigenous components of the surface sediments as well as those of the deeper sand layers can be derived from the Apulian shelf and the Italian mainland (Cretaceous Apulian Plateau and Gargano Mountains, southern Apennines, volcanic province of the Monte Vulture). Indicated by the heavy mineral glaucophane, a minor proportion of the sedimentary material is probably of Alpine origin. If this portion is considered to be first-cycle clastic material it reaches the Strait of Otranto after a longitudinal transport of 700 km via the Adriatic Sea. The lack of phyllosilicates in the coarse- to medium-grained shelf samples might be explained by the activity of the "Apulian Current" (surface velocities up to 4 knots) which in the past possibly has affected the bottom almost down to depths of the shelf edge. The percentage of planktonic organisms, and also the plankton: benthos ratio in the sediments is a useful indicator for bathymetry (depth zonation).

ETOPO1 Global Relief Model converted to PanMap layer format

ETOPO1 is a 1 arc-minute global relief model of Earth's surface that integrates land topography and ocean bathymetry. It was built from numerous global and regional data sets. Data were converted to the PanMap layer format in 14 contour lines from 500 to 7000 meter in steps of 500 m. The link provides a zip-archive (1.1 MB) with *.lay files. The PanMap Mini-GIS software is published at doi:10.1594/PANGAEA.104840.

Maps of coastal and marine geomorphology between Albenga and Savona (NW Mediterranean Sea, Italy)

In this paper, we present a map describing the main geomorphological features of the coastal and marine area between the towns of Albenga and Savona (Ligurian Sea, NW Mediterranean) corresponding to a coastal stretch of ~40 km. To produce this map, we collated data from the literature, orthophotos, perspective photos, multibeam and side scan sonar data, and undertook direct surveys to ground truth data obtained using indirect techniques. We divided the information into nine thematic layers, including bathymetry, natural coastal types, geomorphological elements, seafloor coverage (both geological and biological), coastal and nearshore dynamics, human influence on coastal and marine environments, coastal occupation and protected areas.

At surface behaviour of adult male southern elephant seals from King George Island from expedition JUB2000

Adult male southern elephant seals instrumented in 2000 on King George Island (n = 13), travelled both to the north (doi:10.1594/PANGAEA.231580, doi:10.1594/PANGAEA.231585) and to the east (doi:10.1594/PANGAEA.231571, doi:10.1594/PANGAEA.231579, doi:10.1594/PANGAEA.261708, doi:10.1594/PANGAEA.261709, doi:10.1594/PANGAEA.261710, doi:10.1594/PANGAEA.261711) of the Antarctic Peninsula. Five males (doi:10.1594/PANGAEA.231571, doi:10.1594/PANGAEA.231579, doi:10.1594/PANGAEA.231580, doi:10.1594/PANGAEA.261710, doi:10.1594/PANGAEA.231585) remained within 500 km of the island and focusing movements in the Bransfield Strait and around the Antarctic Peninsula. Sea-surface temperatures encountered by these animals showed little variation and they seemed to move about irrespective of sea ice cover, but frequented areas of shallow bathymetry. Three males (doi:10.1594/PANGAEA.261708, doi:10.1594/PANGAEA.261709, doi:10.1594/PANGAEA.261711) moved as far as 75°S to the east of the peninsula, into the Weddell Sea, with maximum distances of more than 1500 km from King George Island. They travelled into the Weddell Sea along the western continental shelf break until they reached the region of the Filchner Trough outflow. Here the bathymetry consists of canyons and ridges which support the intensive mixing between the warm saline waters of the Weddell Gyre and the very cold outflow waters with Ice Shelf water ingredients at the Antarctic Slope Front. Another five data sets were shorter then 40 days, and excluded from analyses (doi:10.1594/PANGAEA.231568, doi:10.1594/PANGAEA.231576, doi:10.1594/PANGAEA.231572, doi:10.1594/PANGAEA.231577, doi:10.1594/PANGAEA.264710). A computer animation was developed to visualize the animal movements in relation to the extent and concentration of sea ice (doi:10.1594/PANGAEA.509404). The need for re-instrumentation of adult males from King George Island is highlighted to investigate whether males continue to travel to similar areas and to obtain higher resolution data.

Wetland maps including open water extent dynamics based on ENVISAT ASAR WS for Siberia, 2007 and 2008, links to GeoTIFFs

Wetlands store large amounts of carbon, and depending on their status and type, they release specific amounts of methane gas to the atmosphere. The connection between wetland type and methane emission has been investigated in various studies and utilized in climate change monitoring and modelling. For improved estimation of methane emissions, land surface models require information such as the wetland fraction and its dynamics over large areas. Existing datasets of wetland dynamics present the total amount of wetland (fraction) for each model grid cell, but do not discriminate the different wetland types like permanent lakes, periodically inundated areas or peatlands. Wetland types differently influence methane fluxes and thus their contribution to the total wetland fraction should be quantified. Especially wetlands of permafrost regions are expected to have a strong impact on future climate due to soil thawing. In this study ENIVSAT ASAR Wide Swath data was tested for operational monitoring of the distribution of areas with a long-term SW near 1 (hSW) in northern Russia (SW = degree of saturation with water, 1 = saturated), which is a specific characteristic of peatlands. For the whole northern Russia, areas with hSW were delineated and discriminated from dynamic and open water bodies for the years 2007 and 2008. The area identified with this method amounts to approximately 300,000 km**2 in northern Siberia in 2007. It overlaps with zones of high carbon storage. Comparison with a range of related datasets (static and dynamic) showed that hSW represents not only peatlands but also temporary wetlands associated with post-forest fire conditions in permafrost regions. Annual long-term monitoring of change in boreal and tundra environments is possible with the presented approach. Sentinel-1, the successor of ENVISAT ASAR, will provide data that may allow continuous monitoring of these wetland dynamics in the future complementing global observations of wetland fraction.

Flow separation and roughness lengths over large bedforms in a tidal environment

This study characterises the shape of the flow separation zone (FSZ) and wake region over large asymmetric bedforms under tidal flow conditions. High resolution bathymetry, flow velocity and turbulence data were measured along two parallel transects in a tidal channel covered with bedforms. The field data are used to verify the applicability of a numerical model for a systematic study using the Delft3D modelling system and test the model sensitivity to roughness length. Three experiments are then conducted to investigate how the FSZ size and wake extent vary depending on tidally-varying flow conditions, water levels and bathymetry. During the ebb, a large FSZ occurs over the steep lee side of each bedform. During the flood, no flow separation develops over the bedforms having a flat crest; however, a small FSZ is observed over the steepest part of the crest of some bedforms, where the slope is locally up to 15°. Over a given bedform morphology and constant water levels, no FSZ occurs for velocity magnitudes smaller than 0.1 m s**-1; as the flow accelerates, the FSZ reaches a stable size for velocity magnitudes greater than 0.4 m s**-1. The shape of the FSZ is not influenced by changes in water levels. On the other hand, variations in bed morphology, as recorded from the high-resolution bathymetry collected during the tidal cycle, influence the size and position of the FSZ: a FSZ develops only when the maximum lee side slope over a horizontal distance of 5 m is greater than 10°. The height and length of the wake region are related to the length of the FSZ. The total roughness along the transect lines is an order of magnitude larger during the ebb than during the flood due to flow direction in relation to bedform asymmetry: during the ebb, roughness is created by the large bedforms because a FSZ and wake develops over the steep lee side. The results add to the understanding of hydrodynamics of natural bedforms in a tidal environment and may be used to better parameterise small-scale processes in large-scale studies.

Penetration velocity and deceleration of penetrometer stations N1 to N97 during cruise Senckenberg_11_2008

In-situ geotechnical measurements of surface sediments were carried out along large subaqueous dunes in the Knudedyb tidal inlet channel in the Danish Wadden Sea using a small free-falling penetrometer. Vertical profiles showed a typical stratification pattern with a resolution of ~1 cm depicting a thin surface layer of low sediment strength and a stiffer substratum below (quasi-static bearing capacity equivalent: 1-3 kPa in the top layer, 20-140 kPa in the underlying sediment; thickness of the top layer ca. 5-8 cm). Observed variations in the thickness and strength of the surface layer during a tidal cycle were compared to mean current velocities (measured using an acoustic Doppler current profiler, ADCP), high-resolution bathymetry (based on multibeam echo sounding, MBES) and qualitative estimates of suspended sediment distributions in the water column (estimated from ADCP backscatter intensity). The results revealed an ebb dominance in sediment remobilization, and a general accretion of the bed towards low water. A loose top layer occurred throughout the tidal cycle, likely influenced by bedload transport and small events of suspended sediment resettlement (thickness: 6 +-2 cm). Furthermore, this layer showed a significant increase in thickness (e.g. from 8 cm to 16 cm) related to periods of overall deposition. These findings imply that dynamic penetrometers can conveniently serve to (1) quantify potentially mobile sediments by determining the thickness of a loose sediment surface layer, (2) unravel sediment strength development in potentially mobile sediments and (3) identify sediment accumulation. Such data are an important complement and add a new geotechnical perspective during investigations of sediment remobilization processes in highly dynamic coastal environments.