Quantitative phase Analisis: A comparative study of Mo and Cu strictly monochromatic radiations

A comparison of the Rietveld quantitative phase analyses (RQPA) obtained using Cu-Kα1, Mo-Kα1, and synchrotron strictly monochromatic radiations is presented. The main aim is to test a simple hypothesis: high energy Mo-radiation, combined with high resolution laboratory X-ray powder diffraction optics, could yield more accurate RQPA, for challenging samples, than well-established Cu-radiation procedure(s). In order to do so, three set of mixtures with increasing amounts of a given phase (spiking-method) were prepared and the corresponding RQPA results have been evaluated. Firstly, a series of crystalline inorganic phase mixtures with increasing amounts of an analyte was studied in order to determine if Mo-Kα1 methodology is as robust as the well-established Cu-Kα1 one. Secondly, a series of crystalline organic phase mixtures with increasing amounts of an organic compound was analyzed. This type of mixture can result in transparency problems in reflection and inhomogeneous loading in narrow capillaries for transmission studies. Finally, a third series with variable amorphous content was studied. Limit of detection in Cu-patterns, ~0.2 wt%, are slightly lower than those derived from Mo-patterns, ~0.3 wt%, for similar recording times and limit of quantification for a well crystallized inorganic phase using laboratory powder diffraction was established ~0.10 wt%. However, the accuracy was comprised as relative errors were ~100%. Contents higher than 1.0 wt% yielded analyses with relative errors lower than 20%. From the obtained results it is inferred that RQPA from Mo-Kα1 radiation have slightly better accuracies than those obtained from Cu-Kα1. This behavior has been established with the calibration graphics obtained through the spiking method and also from Kullback-Leibler distance statistic studies. We explain this outcome, in spite of the lower diffraction power for Mo-radiation (compared to Cu-radiation), due to the larger volume tested with Mo, also because higher energy minimize pattern systematic errors and the microabsorption effect.

A phenomenological study of Irish and Portuguese women’s experiences of receiving family support when studying STEM subjects at technical institutes

Comunicação apresentada na 44th SEFI Conference, 12-­15 September 2016, Tampere, Finland

A comparative study of hydroxyl- and carboxylate-functionalized imidazolium and benzimidazolium salts as precursors for N-heterocyclic carbene ligands

The preparation of imidazolium and benzimidazolium salts with hydroxyl or carboxylate functions has been achieved using straightforward synthetic pathways. These salts in combination with palladium(II) acetate give active catalytic systems for Suzuki reaction. A comparative study has been performed, which has revealed that both the heterocycle and the functional group are important for the catalytic activity and stability of the catalyst.

A case-only genome-wide association study of gender- and age-specific risk markers for childhood leukemia

Males and age group 1 to 5 years show a much higher risk for childhood acute lymphoblastic leukemia (ALL). We performed a case-only genome-wide association study (GWAS), using the Illumina Infinium HumanCoreExome Chip, to unmask gender- and age-specific risk variants in 240 non-Hispanic white children with ALL recruited at Texas Children’s Cancer Center, Houston, Texas. Besides statistically most significant results, we also considered results that yielded the highest effect sizes. Existing experimental data and bioinformatic predictions were used to complement results, and to examine the biological significance of statistical results. ^ Our study identified novel risk variants for childhood ALL. The SNP, rs4813720 (RASSF2), showed the statistically most significant gender-specific associations (P < 2 x 10-6). Likewise, rs10505918 (SOX5) yielded the lowest P value (P < 1 x 10-5 ) for age-specific associations, and also showed the statistically most significant association with age-at-onset (P < 1 x 10-4). Two SNPs, rs12722042 and 12722039, from the HLA-DQA1 region yielded the highest effect sizes (odds ratio (OR) = 15.7; P = 0.002) for gender-specific results, and the SNP, rs17109582 (OR = 12.5; P = 0.006), showed the highest effect size for age-specific results. Sex chromosome variants did not appear to be involved in gender-specific associations. ^ The HLA-DQA1 SNPs belong to DQA1*01:07and confirmed previously reported male-specific association with DQA1*01:07. Twenty one of the SNPs identified as risk markers for gender- or age-specific associations were located in the transcription factor binding sites and 56 SNPs were non-synonymous variants, likely to alter protein function. Although bioinformatic analysis did not implicate a particular mechanism for gender- and age-specific associations, RASSF2 has an estrogen receptor-alpha binding site in its promoter. The unknown mechanisms may be due to lack of interest in gender- and age-specificity in associations. These results provide a foundation for further studies to examine the gender- and age-differential in childhood ALL risk. Following replication and mechanistic studies, risk factors for one gender or age group may have a potential to be used as biomarkers for targeted intervention for prevention and maybe also for treatment.^

Reflective judgment vs. investigation of things – a comparative study of Kant and Zhu Xi

This thesis is devoted to studying two historical philosophical events that happened in the West and the East. A metaphysical crisis stimulated Kant’s writings during his late critical period towards the notion of the supersensible. It further motivated a methodological shift and his coining of reflective judgment, which eventually brought about a systemic unfolding of his critical philosophy via Kantian moral teleology. Zhu Xi and his Neo-Confucian contemporaries confronted a transformed intellectual landscape resulting from the Neo-Daoist and Buddhist discourses of “what is beyond the form”. The revival of Confucianism required a method in order to relocate the formless Dao back into daily life and to reconstruct a meta-ethical foundation within a social context. This led to the Neo-Confucian recasting of “investigation of things” from The Great Learning via complex hermeneutic operations. By the respective investigation on, as well as the comparative analysis of the two events, I reveal the convergence and incommensurability between the two distinct cultural traditions concerning the metaphysical quests, the mechanism of intellectual development, and moral teleology, so as to capture the intrinsic characteristics of philosophical research in general.

Anatomy and Eugenics: Case Study of Change and Stasis in Classificatory Structures

Research poster about classification structures

Breaking old and new ground: a comparative study of coastal and inland naming in Berwickshire

This thesis investigates the place-names of four parishes in Berwickshire and compares coastal and inland naming patterns. Berwickshire is a large county that borders on northern England and historically formed part of Anglo-Saxon Northumbria. Partly due to the survival of extensive archives from the medieval priory of Coldingham, preserved in Durham Cathedral Archives, this county holds some of Scotland’s earliest recorded place- names. The parishes that form the research area are grouped together in the north-east of the county. Two of these parishes, Abbey St Bathans and Bunkle & Preston, are inland, and two, Cockburnspath and Coldingham, have extensive coastlines. The diversity of this group of parishes allows a comparative study of the place-names of coastal and inland areas to be undertaken. The topography of Berwickshire’s thirty-two parishes is very varied, and the four parishes have been chosen to reflect this range of landscapes. The place-names within the four parishes examined in this thesis derive almost exclusively from Old English, Older Scots, Modern Scots including Standard Scottish English, with a small minority derived from Old Norse, Gaelic, and Brittonic. The chronology of Old English, Older Scots, and Modern Scots is defined as given in the Concise Scots Dictionary: Old English is the period up to 1100, Older Scots is the period 1100-1700, and Modern Scots is the period 1700 onwards (CSD, 1985: xiii). Often with place-names it is not possible to give a precise dating for the coining of a toponym. For the purposes of this study, the language label given for a toponym is that of the date of the earliest record of the place-name with earlier linguistic evidence supplementing discussion. This thesis focuses on the names of topographic features, for example hills, rocks and woodland, and the role of perception in their naming. In order to compare the role of perception in inland and coastal naming, this thesis includes a diachronic study of the toponymy of the research area, along with two case studies. The first of these is a study of the toponymy of relief features, which focuses on generic elements in order to compare the perception of one type of referent in the two environments. The second is a study of the ‘colour’ category, which focuses on qualifying elements in order to compare the use of colour terms in the two environments. This thesis is the first comparative study of inland and coastal place-names, and it is one of the first to investigate new ways of using fieldwork as a central part of its methodology. In doing so it proposes innovative and nuanced ways to understand the toponymy of diverse landscapes within a community.

Swedish-speaking Finns: a multi-method qualitative study of belonging and identification

The Swedish-speaking minority in Finland, often described as an ‘elite minority’, holds a special position in the country. With linguistic rights protected by the constitution of Finland, Swedish-speakers, as a minority of only 5.3%, are often described in public discourse and in academic and statistical studies as happier, healthier and more well off economically than the Finnish-speaking majority. As such, the minority is a unique example of language minorities in Europe. Knowledge derived from qualitatively grounded studies on the topic is however lacking, meaning that there is a gap in understanding of the nature and complexity of the minority. Drawing on ethnographic research conducted in four different locations in Finland over a period of 12 months, this thesis provides a theoretically grounded and empirically informed rich account of the identifications and sites of belonging of this diverse minority. The thesis makes a contribution to theoretical, methodological and empirical research on the Swedish-speaking minority, debates around identity and belonging, and ethnographic methodological approaches. Making use of novel methodology in studying Swedish-speaking Finns, this thesis moves beyond generalisations and simplifications on its nature and character. Drawing on rich ethnographic empirical material, the thesis interrogates various aspects of the lived experience of Swedish-speaking Finns by combining the concepts of belonging and identification. Some of the issues explored are the way in which belonging can be regionally specific, how Swedish-speakers create Swedish-spaces, how language use is situational and variable and acts as a marker of identity, and finally how identifications and sites of belonging among the minority are extremely varied and complex. The thesis concludes that there are various sites of belonging and identification available to Swedish-speakers, and these need to be studied and considered in order to gain an accurate picture of the lived experience of the minority. It also argues that while identifications are based on collective imagery, this imagery can vary among Swedish-speakers and identifications are multiple and situational. Finally, while language is a key commonality for the minority, the meanings attached to it are not only concerned with ‘Finland Swedishness’, but connected to various other factors, such as the context a person grew up in and the region one lives in. The complex issues affecting the lived experience of Swedish-speaking Finns cannot be understood without the contribution of findings from qualitative research. This thesis therefore points towards a new kind of understanding of Swedish-speaking Finns, moving away from stereotypes and simplifications, shifting our gaze towards a richer perception of the minority.

Infections of Hypostomus spp. by Trypanosoma spp. and leeches: a study of hematology and record of these hirudineans as potential vectors of these hemoflagellates.

Dentre os Kinetoplastida, Trypanosoma é o gênero com maior ocorrência, infectando populações de peixes marinhos e de água doce em todo o mundo. Apresenta elevados níveis de prevalência, ocasiona impactos na saúde dos peixes e consequente perdas econômicas, principalmente para populações de peixes em situação de estresse. Este estudo investigou a infecção por Trypanosoma spp. e sanguessugas em Hypostomus spp. e parâmetros sanguíneos desse hospedeiro do sistema de tributários do Rio Tapajós, no Estado do Pará, Amazônia Oriental, Brasil. De 47 hospedeiros examinados, 89,4% estavam parasitados por Trypanosoma spp., e 55,4% tinham também sanguessugas na região da boca. A intensidade de Trypanosoma spp. aumentou com o tamanho dos hospedeiros, mas as condições corporais não foram influenciadas pelo parasitismo. O número de eritrócitos, hematócrito, hemoglobina, VCM, HCM, CHCM, número de leucócitos e trombócitos totais apresentaram variações e correlação negativa com a intensidade de Trypanosoma spp. no sangue dos hospedeiros. Os resultados sugerem que sanguessugas foram os vetores de Trypanosoma spp. in Hypostomus spp.

Study of medicinal and food plants as a source of biologically active compounds.

In the last few decades, scientific evidence has pointed out the health-beneficial effects of phenolic compounds in foods, including a decrease in risk of developing degenerative and chronic diseases, known to be caused by oxidative stress. In this frame can be inserted research carried out during my PhD thesis, which concerns the phytochemical investigation of phenolic composition in sweet cherries (Prunus avium L.), apple fruits (Malus domestica L.) and quinoa seeds (Chenopodium quinoa Willd.). The first project was focused on the investigation of phytochemical profile and nutraceutical value of fruits of new sweet cherry cultivars. Their phenolic profile and antioxidant activity were investigated and compared with those of commonly commercialized cultivars. Their nutraceutical value was evaluated in terms of antioxidant/neuroprotective capacity in neuron-like SH-SY5Y cells, in order to investigate their ability to counteract the oxidative stress and/or neurodegeneration process The second project was focused on phytochemical analysis of phenolic compounds in apples of ancient cultivars with the aim of selecting the most diverse cultivars, that will then be assayed for their anti-carcinogenic and anti-proliferative activities against the hepato-biliary and pancreatic tumours. The third project was focused on the analysis of polyphenolic pattern of seeds of two quinoa varieties grown at different latitudes. Analysis of phenolic profile and in vitro antioxidant activity of seed extracts both in their free and soluble-conjugated forms, showed that the accumulation of some classes of flavonoids is strictly regulated by environmental factors, even though the overall antioxidant capacity does not differ in quinoa Regalona grown in Chile and Italy. During the internship period carried out at the Department of Organic Chemistry at Universidad Autónoma de Madrid (UAM), it was achieved the isolation of two pentacyclic triterpenoids, from an endemic Peruvian plant, Jatropha macrantha Müll. Arg., with bio-guided fractionation technique.

The road to augmented reality: a comprehensive study of hardware and applications over the last ten years

Augmented reality has been growing extensively over the years in all aspects and multiple fields. My aim in this paper is to present a comprehensive study on augmented reality(AR) hardware and its applications from early developments to the possible future trends. Particularly my research is more focused on last 11 years(2012-2022), where I systematically reviewed 30 research papers per year to get a clear knowledge on trends of AR. A total of 330 publications were reviewed and grouped according to their application. The review's main contribution is to show the entire landscape of AR research and to provide a broad view of how it has evolved. Along with various AR glasses history and specifications are presented in detail. In the penultimate chapter I explained my methodology of research following my analysis from the past to the present along with my thoughts for the future. To conclude my study, In the final chapter I made some statements about possible future with AR, VR and XR(extended reality).

Standarização no IKEA Industry de Paço de Ferreira

Standarização de um posto de trabalho não é mais que definir o melhor método de trabalho que vai ser seguido por todos os operadores que trabalham no mesmo. Uma vez definido esse método, é importante para uma empresa ter noção da produtividade que podem alcançar, dado que pode ser retirado a partir deste método, e é no seguimento disto que surge o estudo dos métodos e tempos, mais concretamente o estudo dos tempos por cronometragem. A aplicação deste estudo foi despoletada pela necessidade do IKEA Industry de Paços de Ferreira, em dar o próximo passo na standarização dos seus postos de trabalho, área a área, e da necessidade de terem uma pessoa em cada área que analisa-se o trabalho que estava a ser feito e calcula-se o tempo de cada rotina. Neste documento, é realizada uma interligação entre os conceitos teóricos que o método exige, como todo o conjunto de fórmulas, restrições, análises e ponderações, com o contexto laboral onde o mesmo foi aplicado e a estratégia desenvolvida pelo IKEA na realização do estudo. O estudo dos métodos e tempos por cronometragem, de todos os métodos existentes, pode ser considerado o mais completo e complexo, uma vez que é mais que observar, registar e retirar uma média ponderada das observações. Este método baseia-se num modelo matemático, que interliga uma série de conceitos e que tem sempre o operador em consideração, seja na avaliação e análise das tarefas que requerem mais esforço dos mesmos, físico ou psicológico, seja em termos de tempos de pausas pessoais que a lei obriga a que as empresas deem. Este detalhe, neste método, é de grande importância, uma vez que a standarização é sempre vista pelos operadores como uma punição. As desvantagens deste método estão no grau de conhecimento e capacidade de observação exigidas ao analista para o executar. Melhor dizendo, um analista que vá executar este trabalho necessita observar muito bem a rotina de trabalho e conhecer onde começa, acaba e tudo o que a ela não pertence, antes de começar a registar seja que tempos forem. Para além disso, é exigido ao analista que perceba o ritmo de trabalho dos operadores através da observação dos mesmos, de modo a que ninguém seja prejudicado. E por fim, é necessária uma grande disponibilidade da parte do analista para retirar o máximo de observações possíveis. Com o intuito de facilitar esta análise, o IKEA Industry criou um ficheiro que compila toda a informação relacionada com o método, e uma explicação de todos os parâmetros que o analista necessita ter em atenção. Esta folha de trabalho foi validada à luz do método, como é possível verificar no decorrer do documento. Um detalhe importante a referir, é que por muito fidedigno que seja este método, tal como qualquer método de standarização, a mínima alteração da rotina de trabalho invalida de imediato o tempo total da rotina, tornando necessário realizar o estudo novamente. Uma vantagem do documento criado pelo IKEA, está na rápida adaptação a estas alterações, uma vez que, caso seja acrescentado ou removido um elemento à rotina, basta alterar o documento, observar e cronometrar os operadores a executar esse novo elemento, e quase automaticamente é definido um novo tempo total padronizado na rotina. Este documento foi criado para fins académicos e de conclusão de um grau académico, mas o estudo quando aplicado na empresa deu origem a contratações, o que só por si mostra as vantagens e impacto que o mesmo pode ter em contexto laboral. Em termos de produtividade, uma vez que a sua aplicação não foi executada a tempo de ser estudada neste documento, não foi possível avaliar a mesma.

Application of standard and refined heat balance integral methods to one-dimensional Stefan problems

The work in this paper concerns the study of conventional and refined heat balance integral methods for a number of phase change problems. These include standard test problems, both with one and two phase changes, which have exact solutions to enable us to test the accuracy of the approximate solutions. We also consider situations where no analytical solution is available and compare these to numerical solutions. It is popular to use a quadratic profile as an approximation of the temperature, but we show that a cubic profile, seldom considered in the literature, is far more accurate in most circumstances. In addition, the refined integral method can give greater improvement still and we develop a variation on this method which turns out to be optimal in some cases. We assess which integral method is better for various problems, showing that it is largely dependent on the specified boundary conditions.

Preparation and Study of Optical Properties of CdS, CdS-TiO2 and CdS-Au Nanocomposites for Photonic Applications

Nanophotonics can be regarded as a fusion of nanotechnology and photonics and it is an emerging field providing researchers opportunities in fundamental science and new technologies. In recent times many new methodsand techniques have been developed to prepare materials at nanoscale dimensions. Most of these materials exhibit unique and interesting optical properties and behavior. Many of these have been found to be very useful to develop new devices and systems such as tracers in biological systems, optical limiters, light emitters and energy harvesters. This thesis presents a summary of the work done by the author in the field by choosing a few semiconductor systems to prepare nanomaterials and nanocomposites. Results of the study of linear and nonlinear optical properties of materials thus synthesized are also presented in the various chapters of this thesis. CdS is the material chosen here and the methods and the studies of the detailed investigation are presented in this thesis related to the optical properties of CdS nanoparticles and its composites. Preparation and characterization methods and experimental techniques adopted for the investigations were illustrated in chapter 2 of this thesis. Chapter 3 discusses the preparation of CdS, TiO2 and Au nanoparticles. We observed that the fluorescence behaviour of the CdS nanoparticles, prepared by precipitation technique, depends on excitation wavelength. It was found that the peak emission wavelength can be shifted by as much as 147nm by varyingthe excitation wavelengths and the reason for this phenomenon is the selective excitation of the surface states in the nanoparticles. This provided certain amount of tunability for the emission which results from surface states.TiO2 nanoparticle colloids were prepared by hydrothermal method. The optical absorption study showed a blue shift of absorption edge, indicating quantum confinement effect. The large spectral range investigated allows observing simultaneously direct and indirect band gap optical recombination. The emission studies carried out show four peaks, which are found to be generated from excitonic as well as surface state transitions. It was found that the emission wavelengths of these colloidal nanoparticles and annealed nanoparticles showed two category of surface state emission in addition to the excitonic emission. Au nanoparticles prepared by Turkevich method showed nanoparticles of size below 5nm using plasmonic absorption calculation. It was also found that there was almost no variation in size as the concentration of precursor was changed from 0.2mM to 0.4mM.We have observed SHG from CdS nanostructured thin film prepared onglass substrate by chemical bath deposition technique. The results point out that studied sample has in-plane isotropy. The relative values of tensor components of the second-order susceptibility were determined to be 1, zzz 0.14, xxz and 0.07. zxx These values suggest that the nanocrystals are oriented along the normal direction. However, the origin of such orientation remains unknown at present. Thus CdS is a promising nonlinear optical material for photonic applications, particularly for integrated photonic devices. CdS Au nanocomposite particles were prepared by mixing CdS nanoparticles with Au colloidal nanoparticles. Optical absorption study of these nanoparticles in PVA solution suggests that absorption tail was red shifted compared to CdS nanoparticles. TEM and EDS analysis suggested that the amount of Au nanoparticles present on CdS nanoparticles is very small. Fluorescence emission is unaffected indicating the presence of low level of Au nanoparticles. CdS:Au PVA and CdS PVA nanocomposite films were fabricated and optically characterized. The results showed a red-shift for CdS:Au PVA film for absorption tail compared to CdS PVA film. Nonlinear optical analysis showed a huge nonlinear optical absorption for CdS:Au PVA nanocomposite and CdS:PVA films. Also an enhancement in nonlinear optical absorption is found for CdS:Au PVA thin film compared to the CdS PVA thin film. This enhancement is due to the combined effect of plasmonic as well as excitonic contribution at high input intensity. Samples of CdS doped with TiO2 were also prepared and the linear optical absorption spectra of these nanocompositeparticles clearly indicated the influence of TiO2 nanoparticles. TEM and EDS studies have confirmed the presence of TiO2 on CdS nanoparticles. Fluorescence studies showed that there is an increase in emission peak around 532nm for CdS nanoparticles. Nonlinear optical analysis of CdS:TiO2 PVA nanocomposite films indicated a large nonlinear optical absorption compared to that of CdS:PVA nanocomposite film. The values of nonlinear optical absorption suggests that these nanocomposite particles can be employed for optical limiting applications. CdSe-CdS and CdSe-ZnS core-shell QDs with varying shell size were characterized using UV–VIS spectroscopy. Optical absorption and TEM analysis of these QDs suggested a particle size around 5 nm. It is clearly shown that the surface coating influences the optical properties of QDs in terms of their size. Fluorescence studies reveal the presence of trap states in CdSe-CdS and CdSe- ZnS QDs. Trap states showed an increase as a shell for CdS is introduced and increasing the shell size of CdS beyond a certain value leads to a decrease in the trap state emission. There is no sizeable nonlinear optical absorption observed. In the case of CdSe- ZnS QDs, the trap state emission gets enhanced with the increase in ZnS shell thickness. The enhancement of emission from trap states transition due to the increase in thickness of ZnS shell gives a clear indication of distortion occurring in the spherical symmetry of CdSe quantum dots. Consequently the nonlinear optical absorption of CdSe-ZnS QDs gets increased and the optical limiting threshold is decreased as the shell thickness is increased in respect of CdSe QDs. In comparison with CdSe-CdS QDs, CdSe-ZnS QDs possess much better optical properties and thereby CdSe-ZnS is a strong candidate for nonlinear as well as linear optical applications.