Comércio internacional, politica comercial brasileira e a atuação da Câmara de Comércio Exterior (CAMEX) na condução das políticas para o setor

The proposal of this study is to present an assessment of the performance of the Brazilian Government Chamber of Foreign Trade (Camex), which is a board of the Council of Government responsible for the formulation, implementation and coordination of the Brazilian trade policy. The study begins with a historical approach to the international trade and the Brazilian foreign trade, mentioning its origins, features and interfaces with the economic development of the country. Based on the approach aforementioned, several interviews were made with authorities, who have remarkable knowledge about the subject, in order to obtain their views, experiences and suggestions concerning the performance of Camex since its creation in 1995. The list of interviewees includes authorities that are currently responsibles for the conduct of the policy on foreign trade, representatives of the organized society, and authorities who were in important positions in this segment of the federal public administration, regarding both the Minister of State, as Director of Cacex and the Executive Secretary of Camex. The conclusions of the study indicate that the Camex has not been succeeding in fully exercise its mandate of formulate, implement and coordinate the foreign trade policy of Brazil. A combination of factors contributes to this situation, especially its small strutcure, the fact that some ministries compete in the segment of foreign trade ¿don't understand¿ Chamber¿s real purpose, and, at last, the absence of a political mandate"(words taken from Motta Veiga) that would fortify its existing legal mandate. Finally, the study suggests some changes in the current organizational modeling of Camex, especially in its hierarchical position in the federal public administration."

Impactos causados pela privatização no ambiente de trabalho, relações interpessoais e perfil profissional : o caso Embratel

O objetivo do presente trabalho foi verificar o impacto da privatização no ambiente de trabalho, relações interpessoais e perfil profissional dos empregados da Embratel. Para tanto, estudou-se a trajetória da empresa no contexto de estatal, a transição e processo de consolidação como empresa privada de um segmento altamente competitivo. O pnmelro capítulo apresenta a história das comunicações no Brasil, as implicações político-econômicas, o surgimento e desenvolvimento da Embratel. O segundo capítulo estuda cultura organizacional e sua importância na viabilização da gestão de recursos humanos. O terceiro capítulo analisa as formações grupais e as relações interpessoais no ambiente de trabalho. O quarto capítulo investiga as novas políticas de recursos humanos e os elementos que constituem o perfil profissional demandado pelo mercado. O capítulo cinco estuda clima organizacional e interfaces com a motivação e satisfação no trabalho. O sexto capítulo analisa a gestão de recursos humanos na Embratel ao longo de sua existência como estatal e a partir da privatização. O sétimo capítulo apresenta e analisa a pesquisa de clima organizacional realizada na empresa em 2000. Dentre os principais aspectos estudados verifica-se: a Embratel iniciou seu processo de modernização antes da privatização e essa veio acelerar e apresentar novos rumos para a empresa. Sua gestão era até então prejudicada pelo excesso de normas e atendimento a interesses políticos, o que lhe conferia pouca agilidade. A relação do empregado com a empresa se modificou. A nova visão e as modernas políticas de recursos humanos hoje oferecem suporte para a efetivação das mudanças desejadas e necessárias, mas também exige alto grau de adaptabilidade de todos.

Uma arquitetura distribuída de hardware e software para controle de um robô móvel autônomo

BRITTO, Ricardo S.; MEDEIROS, Adelardo A. D.; ALSINA, Pablo J. Uma arquitetura distribuída de hardware e software para controle de um robô móvel autônomo. In: SIMPÓSIO BRASILEIRO DE AUTOMAÇÃO INTELIGENTE,8., 2007, Florianópolis. Anais... Florianópolis: SBAI, 2007.

Representation of odometry errors on occupancy grids

SOUZA, Anderson A. S. ; SANTANA, André M. ; BRITTO, Ricardo S. ; GONÇALVES, Luiz Marcos G. ; MEDEIROS, Adelardo A. D. Representation of Odometry Errors on Occupancy Grids. In: INTERNATIONAL CONFERENCE ON INFORMATICS IN CONTROL, AUTOMATION AND ROBOTICS, 5., 2008, Funchal, Portugal. Proceedings... Funchal, Portugal: ICINCO, 2008.

As relações da tríplice hélice no setor da carcinicultura do Rio Grande do Norte: uma análise a partir das abordagens da imersão social e da dependência de recursos

This work consists in a study of the Shrimp Industry in the state of Rio Grande do Norte, whose central issue relates to the understanding of how the Triple Helix (University, Government and the productive sector) interrelationship limits or expands the industry s innovation process. The study aims to understand how the Triple Helix relationship interferes in the innovation process of shrimp in Rio Grande do Norte. As the knowledge becomes the resource key for production methods, the generation of new technologies, new products and processes which demands joint and integrated action of the institutions comprising the Triple Helix: University, Government and productive sector, which possess the essential resources to innovate the process and can be maximized from cooperative relationships between the referred Institutions. Thus, in this work, it was sharply used the pioneering studies of Sabato and Botana (1968) regarding the cooperation relationship between the scientific-technological sphere, the governmental and the productive base, and studies on the Triple Helix approach, proposed by Etzkowitz and Leydesdorff (2000), in which the university has a key role in the process of technological and innovative development of countries and regions, and under which it is assigned to the very University - the character of the entrepreneurial institution, through the concept of entrepreneurial University. Aiming to overcome the criticism of Cooke (2005), regarding the limitations of the Triple Helix approach, in this study it was used - as analytical perspectives - the perspective of social immersion (Granovetter, 1985, 2005) and the theory of resources dependence (PFEFFER; SALANCIK, 1978). The analytical perspectives presented in here, despite of the different assumptions, are essential to eliminate the bias that one only approach can lead (ASTLEY; VAN DE VEM; 2007). The authors arguments focus on the fact that the integration is possible if the researcher acknowledged that different perspectives may have different descriptions of the same phenomenon. As a research strategy, this study is characterized as a study case, along with the proposed objectives - the qualitative method was used as an approach and, depending on the gathering of the sector s historical, a sectional longitudinal view approach was applied (VIEIRA, 2004). The primary and secondary data were used in order to understand the sector s evolutionary process and its inter-institutional relations - regarding the shrimp culture in Rio Grande do Norte - to promote the development, as the content was used for the technical analysis (BARDIN, 1977). The approach of social immersion and resources addiction dependence made it possible to understand that relationships are established within and between each sphere (university, government and productive sector) characterizing a network of low density relationships and strongly internal and external dependence. Based on the speech of Etzkowitz and Mello (2006), a successful Triple Helix strategy of innovation requires not only the involvement and commitment of the parts, within the institutional sphere and among them, but also the development of mechanisms to coordinate the multiple and complex interactions and interfaces, focusing on promoting both environment and context for innovation and learning; it can be acknowledge from study results that the shrimp in the State of the RN, although there are several institutional mechanisms to promote greater integration and technological development, has been presented disjointed - both internally and between the spheres - and under no legitimate practice when facing the innovational promotion and integration institutions. Due to those factors, the central institutions of the network are crucial to the promotion of innovations, spreading through their direct contacts the importance factor of the sustainable competitive activity in the world market and on the national level. However, it may be concluded, from the data, that the Triple Helix relations are interfering in a negative way on what concerns the promotion of innovations in the shrimp industry in RN

Obtenção e caracterização de dióxido de estanho nanoestruturado pelo método de síntese contínua por combustão em solução

Continuous Synthesis by Solution Combustion was employed in this work aiming to obtain tin dioxide nanostructured. Basically, a precursor solution is prepared and then be atomized and sprayed into the flame, where its combustion occurs, leading to the formation of particles. This is a recent technique that shows an enormous potential in oxides deposition, mainly by the low cost of equipment and precursors employed. The tin dioxide (SnO2) nanostructured has been widely used in various applications, especially as gas sensors and varistors. In the case of sensors based on semiconducting ceramics, where surface reactions are responsible for the detection of gases, the importance of surface area and particle size is even greater. The preference for a nanostructured material is based on its significant increase in surface area compared to conventional microcrystalline powders and small particle size, which may benefit certain properties such as high electrical conductivity, high thermal stability, mechanical and chemical. In this work, were employed as precursor solution tin chloride dehydrate diluted in anhydrous ethyl alcohol. Were utilized molar ratio chloride/solvent of 0,75 with the purpose of investigate its influence in the microstructure of produced powder. The solution precursor flux was 3 mL/min. Analysis with X-ray diffraction appointed that a solution precursor with molar ratio chloride/solvent of 0,75 leads to crystalline powder with single phase and all peaks are attributed to phase SnO2. Parameters as distance from the flame with atomizer distance from the capture system with the pilot, molar ratio and solution flux doesn t affect the presence of tin dioxide in the produced powder. In the characterization of the obtained powder techniques were used as thermogravimetric (TGA) and thermodiferential analysis (DTA), particle size by laser diffraction (GDL), crystallographic analysis by X-ray diffraction (XRD), morphology by scanning electron microscopy (SEM), transmission electron microscopy (TEM), specific surface area (BET) and electrical conductivity analysis. The techniques used revealed that the SnO2 exhibits behavior of a semiconductor material, and a potentially promising material for application as varistor and sensor systems for gas

Desenvolvimento de sistemas embarcados para redes de sensores e atuadores sem fio aplicadas em unidades de elevação de petróleo do tipo Plunger-Lift

The Wireless Sensor Networks (WSN) methods applied to the lifting of oil present as an area with growing demand technical and scientific in view of the optimizations that can be carried forward with existing processes. This dissertation has as main objective to present the development of embedded systems dedicated to a wireless sensor network based on IEEE 802.15.4, which applies the ZigBee protocol, between sensors, actuators and the PLC (Programmable Logic Controller), aiming to solve the present problems in the deployment and maintenance of the physical communication of current elevation oil units based on the method Plunger-Lift. Embedded systems developed for this application will be responsible for acquiring information from sensors and control actuators of the devices present at the well, and also, using the Modbus protocol to make this network becomes transparent to the PLC responsible for controlling the production and delivery information for supervisory SISAL

Sensor for cysteine based on oxovanadium(IV) complex of Salen modified carbon paste electrode

The electrochemical behavior of a carbon paste electrode modified (CPEM) with N,N′-ethylenebis(salicylideneiminato)oxovanadium(IV) complex ([(VO)-O-IV(Salen)]) was investigated as a new sensor for cysteine. Cyclic voltammetry at the modified electrode in 0.1 mol L-1 KCl Solution (pH 5.0) showed a single-electron reduction/oxidation of the Couple VO3+/VO2+. The CPEM with [VO(Salen)] presented good electrochemical stability in a wide pH range (4.0-10.0) and an ability to electrooxidate cysteine at 0.65 V versus SCE. These results demonstrate the viability of the use of this modified electrode as an amperometric sensor for cysteine determination. © 2004 Elsevier B.V. All rights reserved.

Mapeamento de ambientes estruturados com extração de informações geométricas através de dados sensoriais

The objective of this thesis is proposes a method for a mobile robot to build a hybrid map of an indoor, semi-structured environment. The topological part of this map deals with spatial relationships among rooms and corridors. It is a topology-based map, where the edges of the graph are rooms or corridors, and each link between two distinct edges represents a door. The metric part of the map consists in a set of parameters. These parameters describe a geometric figure which adapts to the free space of the local environment. This figure is calculated by a set of points which sample the boundaries of the local free space. These points are obtained with range sensors and with knowledge about the robot s pose. A method based on generalized Hough transform is applied to this set of points in order to obtain the geomtric figure. The building of the hybrid map is an incremental procedure. It is accomplished while the robot explores the environment. Each room is associated with a metric local map and, consequently, with an edge of the topo-logical map. During the mapping procedure, the robot may use recent metric information of the environment to improve its global or relative pose

Desenvolvimento de um sistema de automação para uma planta de inertização de resíduos por plasma

The traditional processes for treatment of hazardous waste are questionable for it generates other wastes that adversely affect people s health. As an attempt to minimize these problems, it was developed a system for treatment of hazardous waste by thermal plasma, a more appropriate technology since it produces high temperatures, preventing the formation of toxic pollutants to human beings. The present work brings out a solution of automation for this plant. The system has local and remote monitoring resources to ensure the operators security as well as the process itself. A special attention was given to the control of the main reactor temperature of the plant as it is the place where the main processing occurs and because it presents a complex mathematical model. To this, it was employed cascaded controls based on Fuzzy logic. A process computer, with a particular man-machine interface (MMI), provides information and controls of the plant to the operator, including by Internet. A compact PLC module is in charge of the central element of management automation and plant control which receives information from sensors, and sends it to the MMI

Algoritmos inteligentes para auto-correção, auto-verificação e auto-validação de medidas em sensores

This work presents a set of intelligent algorithms with the purpose of correcting calibration errors in sensors and reducting the periodicity of their calibrations. Such algorithms were designed using Artificial Neural Networks due to its great capacity of learning, adaptation and function approximation. Two approaches willbe shown, the firstone uses Multilayer Perceptron Networks to approximate the many shapes of the calibration curve of a sensor which discalibrates in different time points. This approach requires the knowledge of the sensor s functioning time, but this information is not always available. To overcome this need, another approach using Recurrent Neural Networks was proposed. The Recurrent Neural Networks have a great capacity of learning the dynamics of a system to which it was trained, so they can learn the dynamics of a sensor s discalibration. Knowingthe sensor s functioning time or its discalibration dynamics, it is possible to determine how much a sensor is discalibrated and correct its measured value, providing then, a more exact measurement. The algorithms proposed in this work can be implemented in a Foundation Fieldbus industrial network environment, which has a good capacity of device programming through its function blocks, making it possible to have them applied to the measurement process

Uma arquitetura distribuída de hardware e software para controle de um robô móvel autônomo

In this work, we present a hardware-software architecture for controlling the autonomous mobile robot Kapeck. The hardware of the robot is composed of a set of sensors and actuators organized in a CAN bus. Two embedded computers and eigth microcontroller based boards are used in the system. One of the computers hosts the vision system, due to the significant processing needs of this kind of system. The other computer is used to coordinate and access the CAN bus and to accomplish the other activities of the robot. The microcontroller-based boards are used with the sensors and actuators. The robot has this distributed configuration in order to exhibit a good real-time behavior, where the response time and the temporal predictability of the system is important. We adopted the hybrid deliberative-reactive paradigm in the proposed architecture to conciliate the reactive behavior of the sensors-actuators net and the deliberative activities required to accomplish more complex tasks

Agentes Inteligentes com Foco de Atenção Afetivo em Simulações Baseadas em Agentes

Simulations based on cognitively rich agents can become a very intensive computing task, especially when the simulated environment represents a complex system. This situation becomes worse when time constraints are present. This kind of simulations would benefit from a mechanism that improves the way agents perceive and react to changes in these types of environments. In other worlds, an approach to improve the efficiency (performance and accuracy) in the decision process of autonomous agents in a simulation would be useful. In complex environments, and full of variables, it is possible that not every information available to the agent is necessary for its decision-making process, depending indeed, on the task being performed. Then, the agent would need to filter the coming perceptions in the same as we do with our attentions focus. By using a focus of attention, only the information that really matters to the agent running context are perceived (cognitively processed), which can improve the decision making process. The architecture proposed herein presents a structure for cognitive agents divided into two parts: 1) the main part contains the reasoning / planning process, knowledge and affective state of the agent, and 2) a set of behaviors that are triggered by planning in order to achieve the agent s goals. Each of these behaviors has a runtime dynamically adjustable focus of attention, adjusted according to the variation of the agent s affective state. The focus of each behavior is divided into a qualitative focus, which is responsible for the quality of the perceived data, and a quantitative focus, which is responsible for the quantity of the perceived data. Thus, the behavior will be able to filter the information sent by the agent sensors, and build a list of perceived elements containing only the information necessary to the agent, according to the context of the behavior that is currently running. Based on the human attention focus, the agent is also dotted of a affective state. The agent s affective state is based on theories of human emotion, mood and personality. This model serves as a basis for the mechanism of continuous adjustment of the agent s attention focus, both the qualitative and the quantative focus. With this mechanism, the agent can adjust its focus of attention during the execution of the behavior, in order to become more efficient in the face of environmental changes. The proposed architecture can be used in a very flexibly way. The focus of attention can work in a fixed way (neither the qualitative focus nor the quantitaive focus one changes), as well as using different combinations for the qualitative and quantitative foci variation. The architecture was built on a platform for BDI agents, but its design allows it to be used in any other type of agents, since the implementation is made only in the perception level layer of the agent. In order to evaluate the contribution proposed in this work, an extensive series of experiments were conducted on an agent-based simulation over a fire-growing scenario. In the simulations, the agents using the architecture proposed in this work are compared with similar agents (with the same reasoning model), but able to process all the information sent by the environment. Intuitively, it is expected that the omniscient agent would be more efficient, since they can handle all the possible option before taking a decision. However, the experiments showed that attention-focus based agents can be as efficient as the omniscient ones, with the advantage of being able to solve the same problems in a significantly reduced time. Thus, the experiments indicate the efficiency of the proposed architecture

Proposta de um sistema de segurança eletrônica predial

This work presents a suggestion of a security system of land automation having as objective main the creation of a system capable from easy method, supervise the installations of a building with the goal to preserver security personal and patrimonial necessities, aim at portability low cost and use easiness. Was designed an alarms central and access controller that has digital and analogical inputs for sensors and outputs for buzzer, telephonic dialing and electronic lock. The system is supervised by software that makes solicitations of information to the alarms central through the one computer's serial port (RS-232). The supervisory software was developed in platform LabVIEW with displays the received data on a graphical interface informing the sensors' current states distributed in the building and system events as alarns occurrences. This system also can be viewed through the Internet for people registered by the land security's system administrator

WI-BIO: redes de monitoramento de pacientes em ambientes de automação hospitalar utilizando o padrão IEEE 802.11

The monitoring of patients performed in hospitals is usually done either in a manual or semiautomated way, where the members of the healthcare team must constantly visit the patients to ascertain the health condition in which they are. The adoption of this procedure, however, compromises the quality of the monitoring conducted since the shortage of physical and human resources in hospitals tends to overwhelm members of the healthcare team, preventing them from moving to patients with adequate frequency. Given this, many existing works in the literature specify alternatives aimed at improving this monitoring through the use of wireless networks. In these works, the network is only intended for data traffic generated by medical sensors and there is no possibility of it being allocated for the transmission of data from applications present in existing user stations in the hospital. However, in the case of hospital automation environments, this aspect is a negative point, considering that the data generated in such applications can be directly related to the patient monitoring conducted. Thus, this thesis defines Wi-Bio as a communication protocol aimed at the establishment of IEEE 802.11 networks for patient monitoring, capable of enabling the harmonious coexistence among the traffic generated by medical sensors and user stations. The formal specification and verification of Wi-Bio were made through the design and analysis of Petri net models. Its validation was performed through simulations with the Network Simulator 2 (NS2) tool. The simulations of NS2 were designed to portray a real patient monitoring environment corresponding to a floor of the nursing wards sector of the University Hospital Onofre Lopes (HUOL), located at Natal, Rio Grande do Norte. Moreover, in order to verify the feasibility of Wi-Bio in terms of wireless networks standards prevailing in the market, the testing scenario was also simulated under a perspective in which the network elements used the HCCA access mechanism described in the IEEE 802.11e amendment. The results confirmed the validity of the designed Petri nets and showed that Wi-Bio, in addition to presenting a superior performance compared to HCCA on most items analyzed, was also able to promote efficient integration between the data generated by medical sensors and user applications on the same wireless network