Desenvolvimento de um material têxtil termosenssível com micro/nanocápsulas imobilizadas em fibras regeneradas

Intelligent and functional Textile Materials have been widely developed and researched with the purpose of being used in several areas of science and technology. These fibrous materials require different chemical and physical properties to obtain a multifunctional material. With the advent of nanotechnology, the techniques developed, being used as essential tools to characterize these new materials qualitatively. Lately the application of micro and nanomaterials in textile substrates has been the objective of many studies, but many of these nanomaterials have not been optimized for their application, which has resulted in increased costs and environmental pollution, because there is still no satisfactory effluent treatment available for these nanomaterials. Soybean fiber has low adsorption for thermosensitive micro and nanocapsules due to their incompatibility of their surface charges. For this reason, in this work initially chitosan was synthesized to functionalise soybean fibres. Chitosan is a natural polyelectrolyte with a high density of positive charges, these fibres have negative charges as well as the micro/nanocápsules, for this reason the chitosan acts as auxiliary agent to cationize in order to fix the thermosensitive microcapsules in the textile substrate. Polyelectrolyte was characterized using particle size analyses and the measurement of zeta potential. For the morphological analysis scanning Electron Microscopy (SEM) and x-Ray Diffraction (XRD) and to study the thermal properties, thermogravimetric analysis (TGA), Differential Scanning Calorimetry (DSC), Near Infrared Spectroscopy analysis in the Region of the Fourier Transform Infrared (FTIR), colourimetry using UV-VIS spectrum were simultaneously performed on the substrate. From the measurement of zeta potential and in the determination of the particle size, stability of electrostatic chitosan was observed around 31.55mV and 291.0 nm respectively. The result obtained with (GD) for chitosan extracted from shrimp was 70 %, which according to the literature survey can be considered as chitosan. To optimize the dyeing process a statistical software, Design expert was used. The surface functionalisation of textile substrate with 2% chitosan showed the best result of K/S, being the parameter used for the experimental design, in which this showed the best response of dyeing absorbance in the range of 2.624. It was noted that soy knitting dyed with the thermosensitive micro andnanocapsules property showed excellent washing solidity, which was observed after 25 home washes, and significant K/S values.

Recuperação e purificação do antígeno 503 de Leishmania i. chagasi expresso em E. coli e remoção de endotoxina utilizando adsorção em leito expandido

The growing interest and applications of biotechnology products have increased the development of new processes for recovery and purification of proteins. The expanded bed adsorption (EBA) has emerged as a promising technique for this purpose. It combines into one operation the steps of clarification, concentration and purification of the target molecule. Hence, the method reduces the time and the cost of operation. In this context, this thesis aim was to evaluate the recovery and purification of 503 antigen of Leishmania i. chagasi expressed in E. coli M15 and endotoxin removal by EBA. In the first step of this study, batch experiments were carried out using two experimental designs to define the optimal adsorption and elution conditions of 503 antigen onto Streamline chelating resin. For adsorption assays, using expanded bed, it was used a column of 2.6 cm in diameter by 30.0 cm in height coupled to a peristaltic pump. In the second step of study, the removal of endotoxin during antigen recovery process was evaluated employing the non-ionic surfactant Triton X-114 in the washing step ALE. In the third step, we sought developing a mathematical model able to predict the 503 antigen breakthrough curves in expanded mode. The experimental design results to adsorption showed the pH 8.0 and the NaCl concentration of 2.4 M as the optimum adsorption condition. In the second design, the only significant factor for elution was the concentration of imidazole, which was taken at 600 mM. The adsorption isotherm of the 503 antigen showed a good fit to the Langmuir model (R = 0.98) and values for qmax (maximum adsorption capacity) and Kd (equilibrium constant) estimated were 1.95 mg/g and 0.34 mg/mL, respectively. Purification tests directly from unclarified feedstock showed a recovery of 59.2% of the target protein and a purification factor of 6.0. The addition of the non-ionic surfactant Triton X-114 to the washing step of EBA led to high levels (> 99%) of LPS removal initially present in the samples for all conditions tested. The mathematical model obtained to describe the 503 antigen breakthrough curves in Streamline Chelanting resin in expanded mode showed a good fit for both parameter estimation and validation steps. The validated model was used to optimize the efficiencies, achieving maximum values of the process and of the column efficiencies of 89.2% and 75.9%, respectively. Therefore, EBA is an efficient alternative for the recovery of the target protein and removal of endotoxin from an E. coli unclarified feedstock in just one step.

Aplicação de tratamentos eletroquímicos integrados para remediação de solos e águas contaminadas com petróleo e pesticidas

Electrochemical technologies have been proposed as a promising alternative for the treatment of effluents and contaminated soils. Therefore, the objective of this work was to study the treatment of contaminated soils and wastewaters using electrochemical technologies. Thus, the study regarding the scale-up of the electrochemical system with continuous flow treatment of wastewater of the petrochemical industry was investigated using platinum electrodes supported on titanium (Ti / Pt), and boron-doped diamond (BDD). The results clearly showed that under the operating conditions studied and electrocatalytic materials employed, the better removal efficiency was achieved with BDD electrode reducing the chemical oxygen demand (COD) from 2746 mg L-1 to 200 mg L-1 in 5 h consuming 56.2 kWh m-3 . The decontamination of soils and effluents by petrochemical products was evaluated by studying the effects of electrokinetic remediation for removal of total petroleum hydrocarbons (HTP) from contaminated soil with diesel. The efficiency of this process was dependent on the electrolyte used Na2SO4 (96.46%), citric acid (81.36%) and NaOH (68.03%) for 15 days. Furthermore, the effluent after treatment of the soil was treated by electrochemical oxidation, achieving a good elimination of the organic polluting load dissolved. Depending on the physical behavior of wastewater contaminated with oil (emulsified state); atrazine emulsified effluents were investigated. The main characteristics of the effluent produced during the washing of contaminated soil were studied, being dependent on the surfactant dosage used; which determined its electrolytic treatment with BDD. The electrochemical oxidation of emulsified effluent of atrazine was efficient, but the key to the treatment is reducing the size of micelles.

Análise de microestrutura e de características geotécnicas de misturas de resíduo de polimento de porcelanato e solo

Brazil is a country in development, rich in natural resources. In order to grow sustainably, it is necessary to Brazil to preserve its environment, which is an expressive challenge, especially to industries, such as those producing ceramic materials. This study was developed using Porcelain Tile Polishing Residue (RPP) in blends with soil to build compacted fills. This residue is a slurry generated during the polishing process of porcelain tiles and contains powdery material from the polished tile, the abrasives used during the process and cooling water. The RPP was collected from a private company located in Conde/PB and it was mixed with a sandy-clayey soil, to build the fills. Laboratorial tests were conducted with pure soil, pure RPP and blends in proportions of 5%, 10%, 15% and 20% of RPP in addition to the dry mass of pure soil. The Chemical and Physical Characterization tests performed were: specific solid weight, grain size distribution, laser analysis of grain size distribution, Atterberg limits, X ray fluorescence, X ray diffraction, scanning electron microscopy and soil compaction,. The materials and blends were also compacted and direct shear tests and plate load tests were performed. Plate load tests were conducted using a circular plate with 30 cm diameter, on specimens of pure soil and 5% blend, compacted in a metallic box inside the Soil Mechanics Laboratory of the Federal University of Rio Grande do Norte, Brazil. Both mechanical tests performed were conducted under inundated conditions, willing to reduce the influence of soil suction. An evaluation of the results of the tests performed shows that RPP is a fine material, with grain size distribution smaller than 0,015mm, composed mainly of silica and alumina, and particles in angular shape. The soil was characterized as a clayey sand, geologically known as a lateritic soil, with high percentages of alumina and iron oxide, and particles with rounded shape. Both the Soil and the blends presented low plasticity, while the residue showed a medium plasticity. Direct shear tests showed that the addition of RPP did not cause major changes into blends’ friction angle data, however, it was possible to note that, for the proportions studied, that is a tendency of obtain lower shear stresses for higher percentages of RPP in the blends. Both pure soil and 5% mixture showed a punching disruption for the Plate load test. For this same test, the allowable stress for 5% mixture was 44% higher than the pure soil, and smaller vertical settlement results for all stresses.

Análise de microestrutura e de características geotécnicas de misturas de resíduo de polimento de porcelanato e solo

Brazil is a country in development, rich in natural resources. In order to grow sustainably, it is necessary to Brazil to preserve its environment, which is an expressive challenge, especially to industries, such as those producing ceramic materials. This study was developed using Porcelain Tile Polishing Residue (RPP) in blends with soil to build compacted fills. This residue is a slurry generated during the polishing process of porcelain tiles and contains powdery material from the polished tile, the abrasives used during the process and cooling water. The RPP was collected from a private company located in Conde/PB and it was mixed with a sandy-clayey soil, to build the fills. Laboratorial tests were conducted with pure soil, pure RPP and blends in proportions of 5%, 10%, 15% and 20% of RPP in addition to the dry mass of pure soil. The Chemical and Physical Characterization tests performed were: specific solid weight, grain size distribution, laser analysis of grain size distribution, Atterberg limits, X ray fluorescence, X ray diffraction, scanning electron microscopy and soil compaction,. The materials and blends were also compacted and direct shear tests and plate load tests were performed. Plate load tests were conducted using a circular plate with 30 cm diameter, on specimens of pure soil and 5% blend, compacted in a metallic box inside the Soil Mechanics Laboratory of the Federal University of Rio Grande do Norte, Brazil. Both mechanical tests performed were conducted under inundated conditions, willing to reduce the influence of soil suction. An evaluation of the results of the tests performed shows that RPP is a fine material, with grain size distribution smaller than 0,015mm, composed mainly of silica and alumina, and particles in angular shape. The soil was characterized as a clayey sand, geologically known as a lateritic soil, with high percentages of alumina and iron oxide, and particles with rounded shape. Both the Soil and the blends presented low plasticity, while the residue showed a medium plasticity. Direct shear tests showed that the addition of RPP did not cause major changes into blends’ friction angle data, however, it was possible to note that, for the proportions studied, that is a tendency of obtain lower shear stresses for higher percentages of RPP in the blends. Both pure soil and 5% mixture showed a punching disruption for the Plate load test. For this same test, the allowable stress for 5% mixture was 44% higher than the pure soil, and smaller vertical settlement results for all stresses.

Obtenção e caracterização de um compósito polimérico de matriz poliéster e reforço/carga de tecido plano de algodão

He was obtained and studied the feasibility of using TPA (Tissue Cotton Plan) screen type, for bagging, with a weight of 207.9 g / m2 in a composite of orthophthalic crystal polyester resin matrix. The process for obtaining the composite was tested against the maximum number of layers that could be used without compromising the processability and manufacturing of CPs in compression mold. Five configurations / formulations were selected and tested at 1, 4, 8, 10 and 12 layers of cotton tissue - TPA. TPA was not subjected to chemical treatment, only by passing a mechanical washing process. The composite in its various configurations / formulations was characterized to determine its physical properties. The properties of the composite were higher viability resistance to bending, approaching the matrix and impact resistance, superiority in relation to the polyester resin. Another property that has shown good result compared to other composite has water absorption. Analyzing all the properties set the settings / formulations with higher viability were TA8 and TA10, by combining good processability and higher mechanical strength, with lower loss compared to polyester resin matrix. The composite showed lower mechanical behavior of the resin matrix for all the formulations studied except the impact resistance. The SEM showed a good adhesion between the layers of TPA and polyester resin matrix, without the presence of micro voids in the matrix confirming the efficient manufacturing process of the samples for characterization. The composite proposed proved to be viable for the fabrication of structures with low requests from mechanical stresses, and as demonstrated for the manufacture of solar and wind prototypes, and packaging, shelving, decorative items, crafts and shelves, with good visual appearance.

Obtenção e caracterização de um compósito polimérico de matriz poliéster e reforço/carga de tecido plano de algodão

He was obtained and studied the feasibility of using TPA (Tissue Cotton Plan) screen type, for bagging, with a weight of 207.9 g / m2 in a composite of orthophthalic crystal polyester resin matrix. The process for obtaining the composite was tested against the maximum number of layers that could be used without compromising the processability and manufacturing of CPs in compression mold. Five configurations / formulations were selected and tested at 1, 4, 8, 10 and 12 layers of cotton tissue - TPA. TPA was not subjected to chemical treatment, only by passing a mechanical washing process. The composite in its various configurations / formulations was characterized to determine its physical properties. The properties of the composite were higher viability resistance to bending, approaching the matrix and impact resistance, superiority in relation to the polyester resin. Another property that has shown good result compared to other composite has water absorption. Analyzing all the properties set the settings / formulations with higher viability were TA8 and TA10, by combining good processability and higher mechanical strength, with lower loss compared to polyester resin matrix. The composite showed lower mechanical behavior of the resin matrix for all the formulations studied except the impact resistance. The SEM showed a good adhesion between the layers of TPA and polyester resin matrix, without the presence of micro voids in the matrix confirming the efficient manufacturing process of the samples for characterization. The composite proposed proved to be viable for the fabrication of structures with low requests from mechanical stresses, and as demonstrated for the manufacture of solar and wind prototypes, and packaging, shelving, decorative items, crafts and shelves, with good visual appearance.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

Técnica de curativo: estudo comparativo entre profissionais e estudantes de enfermagem

Comparar o desenvolvimento de profissionais e estudantes de enfermagem quanto à realização da técnica de curativo. Metodologia: estudo descritivo com abordagem quantitativa. A amostra foi escolhida através de amostragem por conveniência, tendo participado da pesquisa 14 profissionais de enfermagem, que foram observados no período de março a junho de 2009, e 24 estudantes de enfermagem, regularmente matriculados no último período do Curso de Graduação em Enfermagem da Universidade Federal da Paraíba, os quais foram observados no período de março e maio de 2010. O procedimento de coleta de dados foi efetuado através da observação não participante e preenchimento de um roteiro semi-estruturado, após a aprovação do Comitê de Ética em Pesquisa do Hospital Universitário Lauro Wanderley, sob Protocolo n. 011/09. Resultados: na maioria dos aspectos analisados, os estudantes se sobressaíram aos profissionais, principalmente com relação à lavagem das mãos, orientação do paciente e utilização de movimentos únicos para limpeza da ferida. Conclusão: os profissionais devem melhorar seu conhecimento, buscando atualização nessa área, e os estudantes devem ser supervisionados durante a realização do procedimento

Sinusite maxilar odontogénica

O seio maxilar é o seio paranasal mais susceptível a invasões bacterianas, tanto pelo óstio nasal, como pela cavidade oral. As sinusites maxilares têm como causas mais frequentes, as infecções víricas, rinites alérgicas ou não alérgicas, variações anatómicas, diabetes mellitus, fumar, nadar, mergulhar, escalar a altas atitudes, e as infecções e tratamentos dentários. A pesquisa bibliográfica, foi realizada sem quaisquer limitações temporais, com restrição linguística a Português, Espanhol e Inglês, sendo excluídos os artigos de outros idiomas; em vários livros e revistas, assim como artigos científicos obtidos, entre Maio e Julho de 2015, nos motores de busca Pubmed, ScienceDirect, Scielo, Elsevier e B-on. A sinusite maxilar odontogénica é uma doença infecto-inflamatória, habitualmente associada à ruptura da membrana de Schneider e a processos infecciosos dentários crónicos. Causa hiperplasia e hipertrofia da mucosa, o que origina sinais e sintomas próprios, assim como mudanças radiográficas perceptíveis. Existem diferentes etiologias de causa odontogénica: cárie, doença periodontal, quistos odontogénicos e iatrogenia – tratamento endodôntico não cirúrgico, cirurgia endodôntica, comunicações oro-antrais, implantes dentários, elevação do seio maxilar, cirurgia pré-protética e cirurgia ortognática – sendo que a iatrogenia é a mais comum (cerca de 56%). Esta patologia afecta com mais frequência indivíduos dos 42,7 aos 51, 7 anos, e preferencialmente a região molar, seguida dos pré-molares e em alguns casos, caninos. Os organismos que dominam na fase aguda e crónica, são sensivelmente os mesmos, mas em número diferente, e existe uma conexão entre a flora comensal periapical e a flora patogénica em caso de sinusite maxilar odontogénica. O diagnóstico é essencialmente clínico, no entanto existem diferentes exames complementares para confirmarem ou formarem o diagnóstico. Pela grande acessibilidade ao método radiográfico, torna-se fundamental que o médico dentista saiba diferencial as diversas patologias que afectam o seio maxilar. O tratamento abrange a eliminação da causa dentária e o tratamento farmacológico, da infecção, essencialmente à base de antibióticos, e da dor se esta existir. E o tratamento cirúrgico, que contempla a punção-lavagem sinusal, antrostomia intranasal, técnica de Caldwell-Luc e cirurgia sinusal endoscópica. Concluindo, o médico dentista deve ter um amplo conhecimento sobre esta patologia para que a possa reconhecer, tratar ou preveni-la.

Ferramentas Lean na indústria corticeira

O presente projeto tem como objetivo a aplicação de ferramentas do universo Lean Thinking na indústria corticeira de forma a identificar e eliminar fontes de desperdício, criar valor e envolver a organização numa cultura de melhoria contínua focada na satisfação do cliente. A Unidade Industrial de Lamas encontra-se a passar por uma fase de mudança e carece da aplicação de ferramentas 5S, Gestão Visual, Kaizen Diário e Standard Work, contempladas no seu programa de melhoria contínua intitulado de Cork.MAIS. A aplicação das ferramentas comprovam o sucesso em termos de qualidade e eficiência operacional. Os 5S conduzem à eficiência, segurança e organização dos postos de trabalho e quando implementados despoletam de forma natural a necessidade de implementação da ferramenta Gestão Visual que acarreta inúmeros benefícios visto que visa sistemas simples e intuitivos. A ferramenta Kaizen Diário contribuiu para aumentar a comunicação entre os diferentes turnos, alinhar os colaboradores com a estratégia da Unidade Industrial de Lamas e identificar oportunidades de melhoria fomentando o trabalho em equipa. A ferramenta Standard Work contribuiu para a redução dos encravamentos dos equipamentos SVE obtendo-se um aumento de 11% do Overall Equipment Effectiveness. Realizar uma retrospetiva de todos os processos e fluxos de produção tornou-se oportuno e, para tal, recorreu-se à ferramenta Value Stream Mapping. Todo o trabalho em equipa serviria para analisar o estado atual da cadeia de valor da Unidade Industrial de Lamas no que respeita ao planeamento e fluxos de material e informação, metodologia do controlo de produto e processo e eficiência operacional. Todas as oportunidades de melhoria identificadas e implementadas acrescentam valor à cadeia da organização mas dá-se destaque às ações de melhoria implementadas no âmbito do projeto de planeamento e fluxos de informação e material. Todas as novas ferramentas implementadas contempladas no sistema pull da organização conduziram a uma redução de 11% do material em work in process e um aumento de 25% da taxa de satisfação de encomendas.

Influência das etapas do processo de abate de suínos na prevalência de patógenos e níveis de microrganismos indicadores de qualidade e higiene

The pig slaughter process involve different steps that can influence the microbiological quality of carcasses. At this, the understanding of the slaughter process on the microbiological aspects is necessary for the implementation and evaluation of critical control points. The microbiological control of the slaughter process should involve the evaluation of pathogens prevalence and levels of quality and hygiene indicator microorganisms. This study aimed at investigating the influence of steps slaughter process on the microbiological levels of pig carcasses, and evaluate if there is correlation between pathogens (Salmonella spp. and Listeria monocytogenes) and indicators (aerobic mesophilic counts, total coliforms, Escherichia coli and Enterobacteriaceae) microorganisms. A high Salmonella soroprevalence in pigs were founded before the slaughter (57.49 %). While the Salmonella prevalence in carcasses at the initial stage of the slaughter was 26.67 % and in the final stage 1.11 %, L. monocytogenes was detected only in the final washing and cooling steps, with a prevalence of 21.11 and 8.89 %, respectively. The aerobic mesophilic counts, Enterobacteriaceae, total coliforms and E. coli levels in initial steps of slaughter process were 4.25 ± 0.37; 1.25 ± 0.38; 1.10 ± 0.35 and 0.86 ± 0.36, respectively. At the end of slaughter process the results were lower (ranging from 0.16 at 2.70 log CFU/cm2). The step that most reduced microbiological levels was the scalding. The dehairing was a critical step that led to a significant increase of microorganisms levels in the process (p < 0.05). The evisceration not proved to be a critical step on the increase of microbial levels, differently of the final washing, which showed significant increases (p < 0.05) over the levels of aerobic counts, total coliforms, E. coli and enterobacterias (0.30; 0.36; 0.27 and 0.42 log respectively) and Salmonella spp. and L. monocytogenes. The chilling contributes significantly to the reduction of microbiological levels of carcasses, bringing them to levels below the all process stages, with the exception of scalding. No correlation between the hygiene indicator microorganisms used and presence of Salmonella spp. and L. monocytogenes were obtained (p < 0.05). The results show that steps in the process are critical to the sanitary profile, which implies the need to implement actions in the process to reducing the microbiological levels.

Iluminação em ambientes fabris: otimização e análise técnica-e-económica

Esta Dissertação aborda a temática da eficiência energética em sistemas de iluminação fabris. Desde os primórdios da história da humanidade que a iluminação tem representado um papel importante. Não só garante condições de segurança, como começou por ser o intuito primordial das fogueiras pré-históricas, traduzindo-se num elemento de conforto. Atualmente seria impensável conceber as mais diversas atividades económicas e produtivas de um país sem iluminação. Nesse sentido a iluminação representa também um elemento fomentador de produtividade. Não é bem conhecido o impacto que a iluminação tem nos custos operacionais de uma unidade fabril. Principalmente por ser difícil de quantificar separadamente na fatura de eletricidade qual a percentagem correspondente à iluminação. Tipicamente estes custos podem ascender a 20% do orçamento global da autarquia em países desenvolvidos. Por esse motivo, o sector da iluminação tem investido esforço no sentido de promover melhores soluções de iluminação capazes de por um lado de satisfazer os requisitos do espaço a iluminar, e por outro propiciar soluções eficientes do ponto de vista energético. Estas soluções assentam essencialmente no uso de dispositivos mais eficientes (como por exemplo os LED´s ou as lâmpadas compactas fluorescentes) bem como em estratégias de controlo eficientes baseadas em dados sensoriais (como por exemplo deteção de movimento/presença). A combinação destas estratégias permite reduzir os consumos em cerca de 80% quando comparadas com soluções passivas. A empresa Amorim Cork Research Lda. é uma empresa prestadora de serviços ao universo das empresas da Corticeira Amorim, uma das maiores multinacionais de origem portuguesa. Teve origem no negócio da cortiça, em 1870, sendo hoje líder destacada no sector a nível mundial. Dada a dimensão da empresa e a sua subdivisão em várias Unidades Industriais com requisitos individuais, será expectável que a iluminação represente uma parte significativa da fatura de eletricidade. Atualmente, os vários setores encontram-se equipados com soluções de iluminação diferentes, na sua maioria empregando tecnologias passivas, noutros casos com dispositivos eficientes. Há algum interesse em migrar para soluções mais eficientes, em parte suportadas em DALI (com interface de comunicação PLC ou Zigbee).

Caracterização do estoque de anchoita (engraulis anchoita) da região Sul do Brasil e utilização desta matéria-prima na elaboração de produto de alto valor agregado

O trabalho teve por objetivo caracterizar o estoque de anchoita (Engraulis anchoita) capturado na região sul do Brasil, visando à utilização deste recurso de alto valor biológico no desenvolvimento de produtos semi-prontos e de fácil preparo, tipo empanado. Os experimentos foram conduzidos com anchoita resultante de cruzeiros realizados pelo Navio Oceanográfico Atlântico Sul da Universidade Federal do Rio Grande (FURG), RS, Brasil. Os exemplares foram capturados entre a cidade de Rio Grande (32ºS, RS-Brasil) e 51ºW. Após captura, o pescado foi armazenado a bordo em mistura de gelo e água do mar, na razão 1:1. As amostras foram transportadas para o laboratório de Biotecnologia da FURG e mantidas sob congelamento a -18°C, até a realização das análises. O trabalho está constituído por uma revisão bibliográfica, que enfatiza a importância do recurso pesqueiro em estudo como potencial a ser explorado, discorre sobre ácidos graxos e perfil de voláteis, bem como, o desenvolvimento de produtos à base de pescado. O desenvolvimento do trabalho é expresso por quatro artigos. O primeiro teve como objetivo caracterizar o estoque de anchoita segundo a biometria, rendimento, composição proximal, compostos nitrogenados e ácidos graxos. O rendimento, a composição proximal e o perfil de ácidos graxos foram realizados nas três frações que compõe o peixe: músculo claro, escuro e vísceras. A análise dos resultados demonstrou a variabilidade dos componentes em função das frações avaliadas e da época de captura, o que pode contribuir para a escolha do processo tecnológico a ser aplicado no desenvolvimento de produtos de alto valor agregado a partir dessa matéria-prima. No segundo artigo foi determinado o perfil de ácidos graxos da anchoita e avaliado o comportamento destes compostos durante o armazenamento congelado, bem como, dos voláteis gerados. Os resultados demonstraram a influência do armazenamento na modificação dos ácidos graxos, em especial, EPA e DHA, e que os voláteis gerados podem ser um índice em potencial para avaliar a qualidade da anchoita congelada. No terceiro artigo objetivou-se selecionar e treinar julgadores para avaliação do odor a pescado utilizando os padrões referência obtidos a partir do perfil de voláteis. Neste sentido, foi levantada a terminologia que descreve o odor da anchoita, definido padrões referência, bem como, selecionado e treinado uma equipe de julgadores. Foram utilizados 20 candidatos, deste total, 9 foram selecionados pelo método das amplitudes. Os julgadores selecionados foram submetidos ao treinamento no uso de escala não estruturada e na avaliação da intensidade do odor a pescado. O desempenho dos julgadores foi definido utilizando como amostra solução de lavagem resultante do processo de obtenção de base protéica de anchoita. Os resultados foram avaliados com base no poder de discriminação, repetibilidade das respostas e concordância entre julgadores, segundo análise de variância, com duas fontes de variação (amostra e repetições). Foram obtidos os valores de Famostra e Frepetição, para cada julgador. Os julgadores com o valor de Famostra significativo (p≤0,30) e Frepetição não significativo (p>0,05), bem como, concordância de médias com os demais julgadores foram considerados treinados. Segundo esse processo a equipe foi constituída por 8 julgadores selecionados e treinados na avaliação do odor a pescado. Finalmente, no quarto artigo foi avaliada a possibilidade de uso de base protéica (BPP) de anchoita na elaboração de massa base de empanados, bem como, em substituição a farinha de cobertura. Para obtenção das BPPs, foram testadas duas soluções extratoras (3 ciclos de extração com ácido fosfórico 0,05% e 1 ciclo de ácido fosfórico seguido de 2 ciclos com água). A BPP obtida na melhor condição utilizada foi seca a 70°C e submetida ao processo de moagem em moinho de facas para ser utilizada como farinha de cobertura. Formulações de empanado utilizando diferentes concentrações (25, 50, 75 e 100%) de anchoita desidratada na cobertura foram testadas no produto frito e forneado. Um teste de preferência com consumidores em potencial foi aplicado às diferentes formulações. Os resultados indicaram que a melhor condição de lavagem para obtenção das BPPs testadas foi quando são utilizados 3 ciclos de extração com ácido fosfórico. A avaliação da preferência junto ao consumidor em potencial demonstrou que a anchoita desidratada pode ser utilizada como farinha de cobertura em empanados na concentração de até 75%.