The Vexing Case of Igor Shafarevich, a Russian Political Thinker

The Russian mathematician, academician and former dissident Igor Shafarevich (b. 1923) is commonly mentioned in Western scholarly studies on perestroika and post-perestroika-era Russian politics as one of the most notable anti-Semites and extreme nationalists of the country. This notoriety owes to Shafarevich’s old samizdat article Russophobia, which was published in 1988. The scandal surrounding Russophobia came to a head when the president of The National Academy of Sciences in the United States asked Shafarevich, its honorary member, to resign. Nothing like this had ever happened in the academy’s history. The present dissertation discusses Shafarevich’s political activities, his texts and ideas as well as their reception. Particular attention is given to Russophobia, whose detailed examination proves very clearly that its reputation as an anti-Semitic text is groundless. The reasons for Russophobia’s hasty but fierce condemnation were many, but only one was that when the Soviet system began to tumble, it was commonly assumed that a vigorous rise in anti-Semitism and extreme nationalism in the Soviet Union/Russia would be just a matter of time. Many observers were highly sensitised to detecting its signs and symptoms. The dissertation also shows that most of those to write the first criticisms of Russophobia and to liken Shafarevich to the ideologues of Nazi Germany were the same people he had criticised in Russophobia for their deterministic view of history and irrational manner of connecting things for the purpose of fanning the flames of distrust between Russia’s Jews and Russians. In retrospect, it is fairly evident that Shafarevich actually managed to effectively “neutralise” the message of many of those obsessed with the Jews among his Russian contemporaries and contributed to the fact that anti-Jewish sentiments have been a great deal less popular in post-communist Russia than so many had feared and expected. The thesis also thoroughly discusses Shafarevich’s other texts and activities before Russophobia’s appearance and after it. In the 1970s, Shafarevich was one of the best-known dissidents in the Soviet Union. He worked together with academician Andrei Sakharov in a dissidents’ unofficial human rights committee and co-operated closely with Aleksandr Solzhenitsyn before Solzhenitsyn’s exile. Then, during the chaotic years of perestroika, Shafarevich defended the basic rights of ordinary citizens and warned that the hype concerning democracy could become counterproductive if the most palpable result of the reforms was the disappearance of citizens’ basic security and elementary social justice. One of the conclusions of the thesis is that even if the world around Shafarevich has changed considerably, his views have remained essentially the same since the late 1960s and early 1970s.

Mixed mode (I and II) crack tip fields in bulk metallic glasses

Stationary crack tip fields in bulk metallic glasses under mixed mode (I and II) loading are studied through detailed finite element simulations assuming plane strain, small scale yielding conditions. The influence of internal friction or pressure sensitivity on the plastic zones. notch deformation, stress and plastic strain fields is examined for different mode mixities. Under mixed mode loading, the notch deforms into a shape such that one part of its surface sharpens while the other part blunts. Increase in mode If component of loading dramatically enhances the normalized plastic zone size, lowers the stresses but significantly elevates the plastic strain levels near the notch tip. Higher internal friction reduces the peak tangential stress but increases the plastic strain and stretching near the blunted part of the notch. The simulated shear bands are straight and extend over a long distance ahead of the notch tip under mode II dominant loading. The possible variations of fracture toughness with mode mixity corresponding to failure by brittle micro-cracking and ductile shear banding are predicted employing two simple fracture criteria. The salient results from finite element simulations are validated by comparison with those from mixed mode (I and II) fracture experiments on a Zr-based bulk metallic glass.

Study of fracture behaviour of bond coats on nickel superalloy by three-point bending of microbeams

A microbeam testing geometry is designed to study the variation in fracture toughness across a compositionally graded NiAl coating on a superalloy substrate. A bi-material analytical model of fracture is used to evaluate toughness by deconvoluting load-displacement data generated in a three-point bending test. It is shown that the surface layers of a diffusion bond coat can be much more brittle than the interior despite the fact that elastic modulus and hardness do not display significant variations. Such a gradient in toughness allows stable crack propagation in a test that would normally lead to unstable fracture in a homogeneous, brittle material. As the crack approaches the interface, plasticity due to the presence of Ni3Al leads to gross bending and crack bifurcation.

Ligand Specificity of Group I Biotin Protein Ligase of Mycobacterium tuberculosis

Background: Fatty acids are indispensable constituents of mycolic acids that impart toughness & permeability barrier to the cell envelope of M. tuberculosis. Biotin is an essential co-factor for acetyl-CoA carboxylase (ACC) the enzyme involved in the synthesis of malonyl-CoA, a committed precursor, needed for fatty acid synthesis. Biotin carboxyl carrier protein (BCCP) provides the co-factor for catalytic activity of ACC. Methodology/Principal Findings: BPL/BirA (Biotin Protein Ligase), and its substrate, biotin carboxyl carrier protein (BCCP) of Mycobacterium tuberculosis (Mt) were cloned and expressed in E. coli BL21. In contrast to EcBirA and PhBPL, the similar to 29.5 kDa MtBPL exists as a monomer in native, biotin and bio-5'AMP liganded forms. This was confirmed by molecular weigt profiling by gel filtration on Superdex S-200 and Dynamic Light Scattering (DLS). Computational docking of biotin and bio-5'AMP to MtBPL show that adenylation alters the contact residues for biotin. MtBPL forms 11 H-bonds with biotin, relative to 35 with bio-5'AMP. Docking simulations also suggest that bio-5'AMP hydrogen bonds to the conserved `GRGRRG' sequence but not biotin. The enzyme catalyzed transfer of biotin to BCCP was confirmed by incorporation of radioactive biotin and by Avidin blot. The K-m for BCCP was similar to 5.2 mu M and similar to 420 nM for biotin. MtBPL has low affinity (K-b = 1.06 x 10(-6) M) for biotin relative to EcBirA but their K-m are almost comparable suggesting that while the major function of MtBPL is biotinylation of BCCP, tight binding of biotin/bio-5'AMP by EcBirA is channeled for its repressor activity. Conclusions/Significance: These studies thus open up avenues for understanding the unique features of MtBPL and the role it plays in biotin utilization in M. tuberculosis.

Mechanism of failure in a free-standing Pt-aluminide bond coat during tensile testing at room temperature

The room temperature (RT) tensile behaviour of a free-standing high activity Pt-aluminide bond coat has been evaluated by microtensile testing technique. The coating had a typical three-layer microstructure. The stress-strain plot for the free-standing coating was linear, indicating the coating to be brittle at RT. Different fracture features were observed across the coating layers, namely quasi-cleavage in the outer layer and inner interdiffusion zone, and cleavage in the intermediate layer. By employing interrupted tensile test and observing the cross-sectional microstructure of the tested specimens, it was determined that failure of the microtensile samples occurred by the initiation of a single crack in the intermediate layer of the coating and its subsequent inside-out propagation. Such a mechanism of failure has been explained in terms of the fracture features observed across the sample thickness. This mechanism of failure is consistent with fracture toughness values of the individual coating layers. (C) 2009 Elsevier B.V. All rights reserved.

Preparation of Y2Si2O7/ ZrO2 composites and their composition - Mechanical properties - Tribology relationships

In this work, novel Y2Si2O7/ZrO 2 composites were developed for structural and coating applications by taking advantage of their unique properties, such as good damage tolerance, tunable mechanical properties, and superior wear resistance. The γ-Y 2Si2O7/ZrO2 composites showed improved mechanical properties compared to the γ-Y2Si 2O7 matrix material, that is, the Young's modulus was enhanced from 155 to 188 GPa (121%) and the flexural strength from 135 to 254 MPa (181%); when the amount of ZrO2 was increased from 0 to 50 vol%, the γ-Y2Si2O7/ZrO2 composites also presented relatively high facture toughness (>1.7 MPa·m 1/2), but this exhibited an inverse relationship with the ZrO 2 content. The composition-mechanical property-tribology relationships of the Y2Si2O7/ZrO2 composites were elucidated. The wear resistance of the composites is not only influenced by the applied load, hardness, strength, toughness, and rigidity but also effectively depends on micromechanical stability properties of the microstructures. The easy growth of subcritical microcracks in Y 2Si2O7 grains and at grain boundaries significantly contributes to the macroscopic fracture toughness, but promotes the pull-out of individual grains, thus resulting in a lack of correlation between the wear rate and the macroscopic fracture toughness of the composites.

Mechanical properties and damage tolerance of Y2SiO5

Y2SiO5 has potential applications as functional-structural ceramic and environmental/thermal barrier coating material. As an important grain-boundary phase in the sintered Si3N4, it also influences the mechanical and dielectric performances of the host material. In this paper, we present the mechanical properties of Y2SiO5 including elastic moduli, hardness, strength and fracture toughness, and try to understand the mechanical features from the viewpoint of crystal structure. Y2SiO5 has low shear modulus, low hardness, as well as high capacity for dispersing mechanical damage energy and for resisting crack penetration. Particularly, it can be machined by cemented carbides tools. The crystal structure characteristics of Y2SiO5 suggest the low-energy weakly bonded atomic planes crossed only by the easily breaking Y-O bonds as well as the rotatable rigid SiO4 tetrahedra are the origins of low shear deformation, good damage tolerance and good machinability of this material. TEM observations also demonstrate that the mechanical damage energy was dispersed in the form of the micro-cleavages, stacking faults and twins along these weakly bonded atomic planes, which allows the "microscale-plasticity" for Y2SiO5.

Near-threshold fatigue crack growth in bulk metallic glass composites

A major drawback in using bulk metallic glasses (BMGs) as structural materials is their extremely poor fatigue performance. One way to alleviate this problem is through the composite route, in which second phases are introduced into the glass to arrest crack growth. In this paper, the fatigue crack growth behavior of in situ reinforced BMGs with crystalline dendrites, which are tailored to impart significant ductility and toughness to the BMG, was investigated. Three composites, all with equal volume fraction of dendrite phases, were examined to assess the influence of chemical composition on the near-threshold fatigue crack growth characteristics. While the ductility is enhanced at the cost of yield strength vis-a-vis that of the fully amorphous BMG, the threshold stress intensity factor range for fatigue crack initiation in composites was found to be enhanced by more than 100%. Crack blunting and trapping by the dendritic phases and constraining of the shear bands within the interdendritic regions are the micromechanisms responsible for this enhanced fatigue crack growth resistance.

Revocation and update of trust in autonomous delay tolerant networks

A Delay Tolerant Network (DTN) is a dynamic, fragmented, and ephemeral network formed by a large number of highly mobile nodes. DTNs are ephemeral networks with highly mobile autonomous nodes. This requires distributed and self-organised approaches to trust management. Revocation and replacement of security credentials under adversarial influence by preserving the trust on the entity is still an open problem. Existing methods are mostly limited to detection and removal of malicious nodes. This paper makes use of the mobility property to provide a distributed, self-organising, and scalable revocation and replacement scheme. The proposed scheme effectively utilises the Leverage of Common Friends (LCF) trust system concepts to revoke compromised security credentials, replace them with new ones, whilst preserving the trust on them. The level of achieved entity confidence is thereby preserved. Security and performance of the proposed scheme is evaluated using an experimental data set in comparison with other schemes based around the LCF concept. Our extensive experimental results show that the proposed scheme distributes replacement credentials up to 35% faster and spreads spoofed credentials of strong collaborating adversaries up to 50% slower without causing any significant increase on the communication and storage overheads, when compared to other LCF based schemes.

Decentralised key management for delay tolerant networks

Public key authentication is the verification of the identity-public key binding, and is foundational to the security of any network. The contribution of this thesis has been to provide public key authentication for a decentralised and resource challenged network such as an autonomous Delay Tolerant Network (DTN). It has resulted in the development and evaluation of a combined co-localisation trust system and key distribution scheme evaluated on a realistic large geographic scale mobility model. The thesis also addresses the problem of unplanned key revocation and replacement without any central authority.

East Asian audio-visual collaboration and the global expansion of Chinese media

In recent years, many of the world’s leading media producers, screenwriters, technicians and investors, particularly those in the Asia-Pacific region, have been drawn to work in the People's Republic of China (hereafter China or Mainland China). Media projects with a lighter commercial entertainment feel – compared with the heavy propaganda-oriented content of the past – have multiplied, thanks to the Chinese state’s newfound willingness to consider collaboration with foreign partners. This is no more evident than in film. Despite their long-standing reputation for rigorous censorship, state policymakers are now encouraging Chinese media entrepreneurs to generate fresh ideas and to develop products that will revitalise the stagnant domestic production sector. It is hoped that an increase in both the quality and quantity of domestic feature films, stimulated by an infusion of creativity and cutting-edge technology from outside the country, will help reverse China’s ‘cultural trade deficit’ (wenhua maoyi chizi) (Keane 2007).

Trust and Safe Choices: Coping with health-related risks in food consumption in St. Petersburg

This dissertation considers the problem of trust in the context of food consumption. The research perspectives refer to institutional conditions for consumer trust, personal practices of food consumption, and strategies consumers employ for controlling the safety of their food. The main concern of the study is to investigate consumer trust as an adequate response to food risks, i.e. a strategy helping the consumer to make safe choices in an uncertain food situation. "Risky" perspective serves as a frame of reference for understanding and explaining trust relations. The original aim of the study was to reveal the meanings applied to the concepts of trust, safety and risks in the perspective of market choices, the assessments of food risks and the ways of handling them. Supplementary research tasks presumed descriptions of institutional conditions for consumer trust, including descriptions of the food market, and the presentation of food consumption patterns in St. Petersburg. The main empirical material is based on qualitative interviews with consumers and interviews and group discussions with professional experts (market actors, representatives of inspection bodies and consumer organizations). Secondary material is used for describing institutional conditions for consumer trust and the market situation. The results suggest that the idea of consumer trust is associated with the reputation of suppliers, stable quality and taste of their products, and reliable food information. Being a subjectively constructed state connected to the act of acceptance, consumer trust results in positive buying decisions and stable preferences in the food market. The consumers' strategies that aim at safe food choices refer to repetitive interactions with reliable market actors that free them from constant consideration in the marketplace. Trust in food is highly mediated by trust in institutions involved in the food system. The analysis reveals a clear pattern of disbelief in the efficiency of institutional food control. The study analyses this as a reflection of "total distrust" that appears to be a dominant mood in many contexts of modern Russia. However, the interviewees emphasize the state's decisive role in suppressing risks in the food market. Also, the findings are discussed with reference to the consumers' possibilities of personal control over food risks. Three main responses to a risky food situation are identified: the reflexive approach, the traditional approach, and the fatalistic approach.

Synthesis, sintering and microstructural characterization of nanocrystalline Hydroxyapatite Composites

Nanocrystalline hydroxyapatite (HAp) exhibits better bioactivity and biocompatibility with enhanced mechanical properties compared to the microcrystalline counterpart. In the present work, nanocrystalline hydroxyapatite was synthesized by wet chemical method. Sintering was carried out with nanocrystalline alumina as additive, the content of alumina being varied from 10 to 30 wt% in the composite. For 20 and 30 wt % Al2O3, hydroxyapatite decomposed into tricalcium phosphate (TCP) above the sintering temperature of 1100 degrees C. The fracture toughness of nano HAp-nano Al2O3 composite is anisotropic in nature and reached a maximum value of 6.9 MPa m(1/2).

Slummiparakeista kyläkarnevaaleihin : Kumpulan ja Toukolan imagonmuutos sanomalehdissä 1963-1999

Having to do with residential areas, geographical image research in Finland has concentrated mainly on those areas with a relatively negative image, such as eastern parts of Helsinki. However, Kumpula and Toukola are former working class residential areas whose image nowadays is mainly positive. This research aims at understanding the process through which their image has gradually come to be that way. Theoretical background of the research relies on human geography and it s viewpoints on places, spaces and areas. Areas, in this research, are understood to be founded on discursive processes that form meanings in societies. This approach is useful because it provides a way to research newspapers and to see how they affect the society. In addition I lean on Sirpa Tani s research on place images to study image and it s formation process. Her point of view covers especially well the effect of media on images and their formation. Articles published in Helsingin Sanomat and Ilta-Sanomat between the years 1963 and 1999 form the data of the research. Methodologically I proceeded by using content analysis to see what kind of topics have been dominating the news feed from Kumpula and Toukola. Content analysis was followed by discourse analysis, which allowed me to focus on the ways of speaking about and representing Kumpula and Toukola. Discourse analysis also reveals whose viewpoint is being represented in media when it comes to publishing news from these parts of the city. It is clearly visible from the results of this research that the image of Kumpula and Toukola has gone through a significant change between 1963 and 1999. In the 1960s discussion in newspapers was dominated by the need for more effective city planning. This meant that Kumpula and Toukola were under a demolition threat in order for the city to built more effectively on those areas. At the same time there was discussion about wooden houses that were built in Kumpula and Toukola right after the second World War. Those houses were in a poor condition, it was even said in the newspapers that people were living in slum-like conditions in them. By the 1980s the image of Kumpula and Toukola gradually started to change. At this time gentrification process was affecting the areas and well-educated working force moved to Kumpula and Toukola. Already in the beginning of 1990s the image of the areas was highly positive. Throughout this decade newspapers published news on Kumpula and Toukola that commented favorably on the atmosphere and the feeling of togetherness among the residents. In addition Kumpula village carnivals, that were first held in 1991, brought a lot of positive publicity to the areas. This research has revelead that especially the active participationg of the residents to promote joint causes has positively affected the image of Kumpula and Toukola. Since the 1960s fighting for the preservation of the areas has provided a reason for a stronger feeling of communality and identifying in the community. This feeling of togetherness in a community has carried all the way to the 1990s, when the areas, having been affected by gentrification, could make good use of the positive image in order to promote joint causes. Keywords: Image, reputation, newspapers, discursive practices

Ring-Opening-Induced Toughening of a Low-Permittivity Polymer-Metal Interface

Integrating low dielectric permittivity (low-k) polymers to metals is an exacting fundamental challenge because poor bonding between low-polarizability moieties and metals precludes good interfacial adhesion. Conventional adhesion-enhancing methods such as using intermediary layers are unsuitable for engineering polymer/metal interfaces for many applications because of the collateral increase in dielectric permittivity. Here, we demonstrate a completely new approach without surface treatments or intermediary layers to obtain an excellent interfacial fracture toughness of > 13 J/m(2) in a model system comprising copper. and a cross-linked polycarbosilane with k similar to 2.7 obtained by curing a cyclolinear polycarbosilane in air.Our results suggest that interfacial oxygen catalyzed molecularring-opening and anchoring of the opened ring moieties of the polymer to copper is the main toughening mechanism. This novel approach of realizing adherent low-k polymer/metal structures without intermediary layers by activating metal-anchoring polymer moieties at the interface could be adapted for applications such as device wiring and packaging, and laminates and composites.