Coherence and phase locking disruption in electromyograms of patients with amyotrophic lateral sclerosis

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Dot enzyme-linked immunosorbent assay (dot-ELISA) for schistosomiasis diagnosis using dacron as solid-phase

Dacron and nitrocellulose were evaluated as matrices for the dot enzyme linked immunosorbent assay (dot-ELISA) for schistosomiasis and compared to indirect immunofluorescence (IMF). Titration of sera from 18 schistosomiasis patients against soluble worm antigen preparation (SWAP) was carried out and sera from healthy individuals from non-endemic areas were used as controls. The IMF was less sensitive than the dot-ELISAs, although the difference was not statistically significant (p > 0.05). The dot-ELISA based on nitrocellulose was as sensitive as that using dacron. Stability did not differ between nitrocellulose and dacron. Specificity was lower when dacron was used than when nitrocellulose was used, although the difference was not statistically significant (p > 0.05). In conclusion, this work showed that nitrocellulose and dacron performed similarly in dot-ELISA, suggesting that they may be used alternatively in population surveillance in endemic areas.

Erros pré-analíticos em anatomia patológica : prevalência, caracterização e consequências para a segurança do doente

RESUMO - A literatura disponível revela que a maioria dos erros relacionados com os exames anatomopatológicos ocorre na fase pré-analítica. Existem alguns estudos que quantificam e caracterizam estes erros mas, não foram encontrados artigos publicados sobre o tema em hospitais portugueses. Foi objetivo deste estudo determinar qual a prevalência e características dos erros pré-analíticos em amostras anatomopatológicas e as suas consequências para a segurança do doente. Analisaram-se 10574 casos de exames anatomopatológicos, de cinco hospitais da região de Lisboa e Vale do Tejo. Os serviços de anatomia patológica registaram e caracterizaram, durante vinte dias, erros detetados nas amostras anatomopatológicas com origem nos serviços requisitantes. Posteriormente os hospitais foram caracterizados quanto aos procedimentos relativos à fase pré-analítica. A prevalência de erros aferida foi de 3,1% (n=330), com um intervalo de confiança a 95% compreendido entre os valores 2,8% e 3,5%. Para além destes resultados destacam-se os seguintes pontos: i. As amostras histológicas têm 4,1% de prevalentes e as de citologia 0,9%; ii. Foram registados erros em 2,6% das requisições e em 1,5% dos contentores com as amostras; iii. A aceitação dos casos com erro é a ação mais frequente (66,9%), seguida pela devolução (24,4%) e retenção (8,7%); iv. Os hospitais com sistemas de notificação de erros e normas escritas para aceitação de amostras têm menor prevalência de erros; v. O impacte dos erros detetados na segurança dos doentes é difícil de determinar, sendo que os mais críticos relacionam-se com amostras devolvidas a fresco, meio de colheita inadequado ou com amostras danificadas. Este estudo permitiu determinar a prevalência e caracterizar os erros pré-analíticos envolvendo amostras anatomopatológicas em hospitais portugueses. Reflete a dimensão atual do problema e efetua recomendações para a sua mitigação. A prevalência de erros encontrada é inferior às publicadas em estudos semelhantes.

O erro na fase pré-analítica : amostras não conformes versus procedimentos

RESUMO: As Análises Clínicas são um precioso elemento entre os meios complementares de diagnóstico e terapêutica permitindo uma enorme panóplia de informações sobre o estado de saúde de determinado utente. O objetivo do laboratório é fornecer informação analítica sobre as amostras biológicas, sendo esta caracterizada pela sua fiabilidade, relevância e facultada em tempo útil. Assim, tratando-se de saúde, e mediante o propósito do laboratório, é notória a sua importância, bem como, a dos fatores associados para o cumprimento do mesmo. O bom desenrolar do ciclo laboratorial, compreendido pelas fases pré-analítica, analítica e pós-analítica é crucial para que o objetivo do laboratório seja cumprido com rigor e rapidez. O presente trabalho “O Erro na Fase Pré-Analítica: Amostras Não Conformes versus Procedimentos”, enquadrado no mestrado de Qualidade e Organização no Laboratório de Análises Clínicas, pretendeu enfatizar a importância da fase pré- analítica, sendo ela apontada como a primordial em erros que acabam por atrasar a saída de resultados ou por permitir que os mesmos não sejam fidedignos como se deseja, podendo acarretar falsos diagnósticos e decisões clínicas erradas. Esta fase, iniciada no pedido médico e finalizada com a chegada das amostras biológicas ao laboratório está entregue a uma diversidade de procedimentos que acarretam, por si só, uma grande diversidade de intervenientes, para além de uma variabilidade de factores que influenciam a amostra e seus resultados. Estes fatores, que podem alterar de algum modo a “veracidade” dos resultados analíticos, devem ser identificados e tidos em consideração para que estejamos convitos que os resultados auxiliam diagnósticos precisos e uma avaliação correta do estado do utente. As colheitas que por quaisquer divergências não originam amostras que cumpram o objectivo da sua recolha, não estando por isso em conformidade com o pretendido, constituem uma importante fonte de erro para esta fase pré-analítica. Neste estudo foram consultados os dados relativos a amostras de sangue e urina não conformes detetadas no laboratório, em estudo, durante o 1º trimestre de 2012, para permitir conhecer o tipo de falhas que acontecem e a sua frequência. Aos Técnicos de Análises Clínicas, colaboradores do laboratório, foi-lhes pedido que respondessem a um questionário sobre os seus procedimentos quotidianos e constituíssem, assim, a população desta 2ª parte do projeto. Preenchido e devolvido de forma anónima, este questionário pretendeu conhecer os procedimentos na tarefa de executar colheitas e, hipoteticamente, confrontá-los com as amostras não conformes verificadas. No 1ºsemestre de 2012 e num total de 25319 utentes registaram-se 146 colheitas que necessitaram de repetição por se verificarem não conformes. A “amostra não colhida” foi a não conformidade mais frequente (50%) versus a “má identificação” que registou somente 1 acontecimento. Houve ainda não conformidades que não se registaram como “preparação inadequada” e “amostra mal acondicionada”. Os técnicos revelaram-se profissionais competentes, conhecedores das tarefas a desempenhar e preocupados em executá-las com qualidade. Eliminar o erro não estará, seguramente, ao nosso alcance porém admitir a sua presença, detetá-lo e avaliar a sua frequência fará com que possamos diminuir a sua existência e melhorar a qualidade na fase pré-analítica, atribuindo-lhe a relevância que desempenha no processo laboratorial.-----------ABSTRACT:Clinical analyses are a precious element among diagnostic and therapeutic tests as they allow an enormous variety of information on the state of health of a user. The aim of the laboratory is to supply reliable, relevant and timely analytical information on biological samples. In health-related matters, in accordance with the objective of the laboratory, their importance is vital, as is the assurance that all the tools are in place for the fulfillment of its purpose. A good laboratory cycle, which includes the pre-analytical, analytical and post-analytical phases, is crucial in fulfilling the laboratory’s mission rapidly and efficiently. The present work - "Error in the pre-analytical phase: non-compliant samples versus procedures”, as part of the Master’s in Quality and Organization in the Clinical Analyses Laboratory, wishes to emphasize the importance of the pre-analytical phase, as the phase containing most errors which eventually lead to delays in the issue of results, or the one which enables those results not to be as reliable as desired, which can lead to false diagnosis and wrong clinical decisions. This phase, which starts with the medical request and ends with the arrival of the biological samples to the laboratory, entails a variety of procedures, which require the intervention of different players, not to mention a great number of factors, which influence the sample and the results. These factors, capable of somehow altering the “truth” of the analytical results, must be identified and taken into consideration so that we may ensure that the results help to make precise diagnoses and a correct evaluation of the user’s condition. Those collections which, due to any type of differences, do not originate samples capable of fulfilling their purpose, and are therefore not compliant with the objective, constitute an important source of error in this pre-analytical phase. In the present study, we consulted data from non-compliant blood and urine samples, detected at the laboratory during the 1st quarter of 2012, to find out the type of faults that happen and their frequency. The clinical analysis technicians working at the laboratory were asked to fill out a questionnaire regarding their daily procedures, forming in this way the population for this second part of the project. Completed and returned anonymously, this questionnaire intended to investigate the procedures for collections and, hypothetically, confront them with the verified non-compliant samples. In the first semester of 2012, and out of a total of 25319 users, 146 collections had to be repeated due to non-compliance. The “uncollected sample” was the most frequent non-compliance (>50%) versus “incorrect identification” which had only one occurrence. There were also unregistered non-compliance issues such as “inadequate preparation” and “inappropriately packaged sample”. The technicians proved to be competent professionals, with knowledge of the tasks they have to perform and eager to carry them out efficiently. We will certainly not be able to eliminate error, but recognizing its presence, detecting it and evaluating its frequency will help to decrease its occurrence and improve quality in the pre-analytical phase, giving it the relevance it has within the laboratory process.

Amorphous silicon e 3D sensors applied to object detection

Nowadays, existing 3D scanning cameras and microscopes in the market use digital or discrete sensors, such as CCDs or CMOS for object detection applications. However, these combined systems are not fast enough for some application scenarios since they require large data processing resources and can be cumbersome. Thereby, there is a clear interest in exploring the possibilities and performances of analogue sensors such as arrays of position sensitive detectors with the final goal of integrating them in 3D scanning cameras or microscopes for object detection purposes. The work performed in this thesis deals with the implementation of prototype systems in order to explore the application of object detection using amorphous silicon position sensors of 32 and 128 lines which were produced in the clean room at CENIMAT-CEMOP. During the first phase of this work, the fabrication and the study of the static and dynamic specifications of the sensors as well as their conditioning in relation to the existing scientific and technological knowledge became a starting point. Subsequently, relevant data acquisition and suitable signal processing electronics were assembled. Various prototypes were developed for the 32 and 128 array PSD sensors. Appropriate optical solutions were integrated to work together with the constructed prototypes, allowing the required experiments to be carried out and allowing the achievement of the results presented in this thesis. All control, data acquisition and 3D rendering platform software was implemented for the existing systems. All these components were combined together to form several integrated systems for the 32 and 128 line PSD 3D sensors. The performance of the 32 PSD array sensor and system was evaluated for machine vision applications such as for example 3D object rendering as well as for microscopy applications such as for example micro object movement detection. Trials were also performed involving the 128 array PSD sensor systems. Sensor channel non-linearities of approximately 4 to 7% were obtained. Overall results obtained show the possibility of using a linear array of 32/128 1D line sensors based on the amorphous silicon technology to render 3D profiles of objects. The system and setup presented allows 3D rendering at high speeds and at high frame rates. The minimum detail or gap that can be detected by the sensor system is approximately 350 μm when using this current setup. It is also possible to render an object in 3D within a scanning angle range of 15º to 85º and identify its real height as a function of the scanning angle and the image displacement distance on the sensor. Simple and not so simple objects, such as a rubber and a plastic fork, can be rendered in 3D properly and accurately also at high resolution, using this sensor and system platform. The nip structure sensor system can detect primary and even derived colors of objects by a proper adjustment of the integration time of the system and by combining white, red, green and blue (RGB) light sources. A mean colorimetric error of 25.7 was obtained. It is also possible to detect the movement of micrometer objects using the 32 PSD sensor system. This kind of setup offers the possibility to detect if a micro object is moving, what are its dimensions and what is its position in two dimensions, even at high speeds. Results show a non-linearity of about 3% and a spatial resolution of < 2µm.

Avaliação da cultura de segurança do doente em meio hospitalar : investigação ação numa unidade de radioterapia

RESUMO Introdução e objetivos As organizações internacionais responsáveis pela Qualidade na Saúde e Segurança do doente (Organização Mundial da Saúde, União Europeia), recomendam aos Estados membros a avaliação da cultura de segurança, como condição essencial para se introduzir mudanças nos comportamentos dos profissionais e nas organizações prestadoras de cuidados de saúde, e alcançar melhores níveis de segurança e de qualidade nos cuidados de saúde prestados aos doentes. Constitui objetivo geral deste trabalho contribuir para a implementação da cultura de segurança do doente nos profissionais envolvidos na prestação de cuidados de saúde, concorrendo para a avaliação da cultura de segurança do doente e, consequentemente para a garantia da qualidade dos cuidados prestados. Metodologia 1ª fase – pré-estudo: através da revisão de literatura identificamos o instrumento mais adequado para avaliar a cultura de segurança do hospital, traduzimos e validámos o instrumento. 2ª fase – desenvolvemos um estudo exploratório-descritivo, transversal, retrospetivo, em 3 hospitais portugueses e um estudo exploratório-descritivo, longitudinal, prospetivo, de investigação-ação, numa unidade de radioterapia. Resultados O Hospital Survey on Patient Safety Culture é o instrumento que revela as adequadas características para a avaliação da cultura de segurança nos hospitais portugueses. No que diz respeito à avaliação da cultura de segurança em três hospitais portugueses, podemos destacar que o trabalho em equipa, a expectativas do supervisor e a aprendizagem organizacional são as dimensões com melhores resultados apesar da frequência das notificações e das respostas ao erro não punitivas apresentarem os piores resultados. Verificou-se que a URT se encontra em franca evolução, o que se torna visível sobretudo na adesão à notificação que aumentou à medida que o tempo foi passando. O envolvimento de todos no desenho da intervenção e nas atividades a decorrer na unidade, foi preponderante para a melhoria da segurança do doente. Conclusões Temos consciência que existem muitas questões por responder e que na realidade não há receitas nem diretrizes que possam afirmar que existem relações de causalidade, confrontando uma determinada ação com a consequente mudança cultural. No entanto, estamos convictos que o envolvimento de todos os membros da organização/unidade, o compromisso forte da liderança, uma comunicação efetiva e uma notificação não punitiva são ingredientes essenciais para a melhoria contínua da cultura de segurança do doente.

Schistosoma mansoni granuloma in late evolutive phase, in a case of tumoral form in man

INTRODUCTION: Authors describe human schistosomal granuloma in late chronic phase, from the morphological and evolutionary viewpoints. METHODS: The study was based on a histological analysis of two fragments obtained from a surgical biopsy of peritoneum and large intestine of a 42-year-old patient, with a pseudotumoral form mimicking a peritoneal carcinomatosis associated to the schistosomiasis hepatointestinal form. RESULTS: Two hundred and three granulomas were identified in the pseudotumor and 27 in the intestinal biopsy, with similar morphological features, most in the late chronic phase, in fibrotic healing. A new structural classification was suggested for granulomas: zone 1 (internal), 2 (intermediate) and 3 (external). CONCLUSIONS: Regarding granuloma as a whole, we may conclude that fibrosis is likely to be controlled by different and independent mechanisms in the three zones of the granuloma. Lamellar fibrosis in zone 3 seems to be controlled by matrix mesenchymal cells (fibroblasts and myoepithelial cells) and by inflammatory exudate cells (lymphocytes, plasmocytes, neutrophils, eosinophils). Annular fibrosis in zone 2, comprising a dense fibrous connective tissue, with few cells in the advanced phase, would be controlled by epithelioid cells involving zone 1 in recent granulomas. In zone 1, replacing periovular necrosis, an initialy loose and tracery connective neoformation, housing stellate cells or with fusiform nuclei, a dense paucicellular nodular connctive tissue emerges, probably induced by fibroblasts. In several granulomas, one of the zones is missing and granuloma is represented by two of them: Z3 and Z2, Z3 and Z1 or Z2 and Z1 and, ultimately, by a scar.

Tracking error of exchange-traded funds: Evidence from the UK

This paper is mainly concerned with the tracking accuracy of Exchange Traded Funds (ETFs) listed on the London Stock Exchange (LSE) but also evaluates their performance and pricing efficiency. The findings show that ETFs offer virtually the same return but exhibit higher volatility than their benchmark. It seems that the pricing efficiency, which should come from the creation and redemption process, does not fully hold as equity ETFs show consistent price premiums. The tracking error of the funds is generally small and is decreasing over time. The risk of the ETF, daily price volatility and the total expense ratio explain a large part of the tracking error. Trading volume, fund size, bid-ask spread and average price premium or discount did not have an impact on the tracking error. Finally, it is concluded that market volatility and the tracking error are positively correlated.

8-Phase Ring oscillator for modern receivers

The evolution of receiver architectures, built in modern CMOS technologies, allows the design of high efficient receivers. A key block in modern receivers is the oscillator. The main objective of this thesis is to design a very low power and low area 8-Phase Ring Oscillator for biomedical applications (ISM and WMTS bands). Oscillators with multiphase outputs and variable duty cycles are required. In this thesis we are focused in 12.5% and 50% duty-cycles approaches. The proposed circuit uses eight inverters in a ring structure, in order to generate the output duty cycle of 50%. The duty cycle of 1/8 is achieved through the combination of the longer duty cycle signals in pairs, using, for this purpose, NAND gates. Since the general application are not only the wireless communications context, as well as industrial, scientific and medical plans, the 8-Phase Oscillator is simulated to be wideband between 100 MHz and 1 GHz, and be able to operate in the ISM bands (447 MHz-930 MHz) and WMTS (600 MHz). The circuit prototype is designed in UMC 130 nm CMOS technology. The maximum value of current drawn from a DC power source of 1.2 V, at a maximum frequency of 930 MHz achieved, is 17.54 mA. After completion of the oscillator layout studied (occupied area is 165 μm x 83 μm). Measurement results confirm the expected operating range from the simulations, and therefore, that the oscillator fulfil effectively the goals initially proposed in order to be used as Local Oscillator in RF Modern Receivers.

The efficacy of the old way/new way methodology on the correction of an automated technical error and its impact on the athlete’s psychological skills : Case study in tennis

The aim of this study was to evaluated the efficacy of the Old Way/New Way methodology (Lyndon, 1989/2000) with regard to the permanent correction of a consolidated and automated technical error experienced by a tennis athlete (who is 18 years old and has been engaged in practice mode for about 6 years) in the execution of serves. Additionally, the study assessed the impact of intervention on the athlete’s psychological skills. An individualized intervention was designed using strategies that aimed to produce a) a detailed analysis of the error using video images; b) an increased kinaesthetic awareness; c) a reactivation of memory error; d) the discrimination and generalization of the correct motor action. The athlete’s psychological skills were measured with a Portuguese version of the Psychological Skills Inventory for Sports (Cruz & Viana, 1993). After the intervention, the technical error was corrected with great efficacy and an increase in the athlete’s psychological skills was verified. This study demonstrates the methodology’s efficacy, which is consistent with the effects of this type of intervention in different contexts.

Poor response to azithromycin in cutaneous leishmaniasis leading to a premature interruption of a multicentric phase III clinical trial in Brazil

Introduction Parenteral antimony-based compounds are still the standard of care for cutaneous leishmaniasis (CL) treatment in many countries, despite their high toxicity. Previous studies showed that oral azithromycin could be an option for CL treatment. The aim of this study was to evaluate efficacy and safety of oral azithromycin (AZ) for CL treatment compared with injectable meglumine antimoniate (MA). Methods This was a randomized, open-label, 2-arm, non-inferiority clinical trial. Treatment-naïve patients with localized CL were treated with MA (15mg/kg/day up to 1,215mg) or AZ (500mg/day) during 20 consecutive days. The primary efficacy end point was a CL cure 90 days after treatment completion. The analysis was performed with intention-to-treat (ITT) and per protocol (PP) analyses. After an anticipated interim analysis, the study was interrupted due to the high failure rate in the azithromycin group. Results Twenty-four volunteers were included in each group. The MA group had a higher cure rate than the AZ group with the ITT and PP analyses, which were 54.2% versus 20.8% [relative risk (RR) 1.97; 95% confidence intervals (95%CI) 1.13-3.42] and 72.2% versus 23.8% (RR 3.03; 95%CI 1.34-6.87), respectively. No unexpected adverse events were observed. Conclusions Azithromycin is ineffective for CL treatment and does not seem to have a role in the therapeutic arsenal for CL.

Long-term follow-up of a patient since the acute phase of Chagas disease (South American trypanosomiasis): further treatment and cure of the infection

ABSTRACTA woman had been followed since 1957 for acute phase Chagas disease. Parasitological and serological tests were positive, and treatment included benznidazole in 1974. Following treatment, parasitological test results were negative and conventional serology remained positive until 1994, with subsequent discordant results (1995-1997). The results became consistently negative since 1999. She had an indeterminate chronic form until 1974. Only two minor and transitory nonspecific alterations on electrocardiogram were noted, with the last nine records normal until June 2014. This case confirms the possibility of curing chronic disease and suggests the benefit of specific treatments for preventing long-term morbidity.