Transition between metadata models: approach based on the use open source software

This article shows the work developed for adapting metadata conform to the official Colombian metadata standard NTC 4611 to the international standard ISO 19115. CatMDedit, an open source metadata editor, is used in this task. CatMDedit is able of import variants of CSDGM such as NTC 4611 and export to the stable version of ISO 19139 (the XML implementation model of ISO 19115)

Simultaneous estimation of indirect and interaction effects using structural equation models

Interaction effects are usually modeled by means of moderated regression analysis. Structural equation models with non-linear constraints make it possible to estimate interaction effects while correcting for measurement error. From the various specifications, Jöreskog and Yang's (1996, 1998), likely the most parsimonious, has been chosen and further simplified. Up to now, only direct effects have been specified, thus wasting much of the capability of the structural equation approach. This paper presents and discusses an extension of Jöreskog and Yang's specification that can handle direct, indirect and interaction effects simultaneously. The model is illustrated by a study of the effects of an interactive style of use of budgets on both company innovation and performance

Application of agent-based modeling to the study of gender stereotypes

Gender stereotypes are sets of characteristics that people believe to be typically true of a man or woman. We report an agent-based model (ABM) that simulates how stereotypes disseminate in a group through associative mechanisms. The model consists of agents that carry one of several different versions of a stereotype, which share part of their conceptual content. When an agent acts according to his/her stereotype, and that stereotype is shared by an observer, then the latter’s stereotype strengthens. Contrarily, if the agent does not act according to his/ her stereotype, then the observer’s stereotype weakens. In successive interactions, agents develop preferences, such that there will be a higher probability of interaction with agents that confirm their stereotypes. Depending on the proportion of shared conceptual content in the stereotype’s different versions, three dynamics emerge: all stereotypes in the population strengthen, all weaken, or a bifurcation occurs, i.e., some strengthen and some weaken. Additionally, we discuss the use of agent-based modeling to study social phenomena and the practical consequences that the model’s results might have on stereotype research and their effects on a community

Option pricing in market models driven by telegraph processes with jumps

Esta tesis está dividida en dos partes: en la primera parte se presentan y estudian los procesos telegráficos, los procesos de Poisson con compensador telegráfico y los procesos telegráficos con saltos. El estudio presentado en esta primera parte incluye el cálculo de las distribuciones de cada proceso, las medias y varianzas, así como las funciones generadoras de momentos entre otras propiedades. Utilizando estas propiedades en la segunda parte se estudian los modelos de valoración de opciones basados en procesos telegráficos con saltos. En esta parte se da una descripción de cómo calcular las medidas neutrales al riesgo, se encuentra la condición de no arbitraje en este tipo de modelos y por último se calcula el precio de las opciones Europeas de compra y venta.

Application of cognitive diagnosis models to competency-based situational judgment tests

Resumen tomado de la publicaci??n

A proposal for the diagnosis of uncertain dynamic systems based on interval models

The performance of a model-based diagnosis system could be affected by several uncertainty sources, such as,model errors,uncertainty in measurements, and disturbances. This uncertainty can be handled by mean of interval models.The aim of this thesis is to propose a methodology for fault detection, isolation and identification based on interval models. The methodology includes some algorithms to obtain in an automatic way the symbolic expression of the residual generators enhancing the structural isolability of the faults, in order to design the fault detection tests. These algorithms are based on the structural model of the system. The stages of fault detection, isolation, and identification are stated as constraint satisfaction problems in continuous domains and solved by means of interval based consistency techniques. The qualitative fault isolation is enhanced by a reasoning in which the signs of the symptoms are derived from analytical redundancy relations or bond graph models of the system. An initial and empirical analysis regarding the differences between interval-based and statistical-based techniques is presented in this thesis. The performance and efficiency of the contributions are illustrated through several application examples, covering different levels of complexity.

Avaluació de la toxicitat de metalls pesants i arsènic en diferents models biològics

En aquest estudi, la toxicitat de diversos metalls pesants i l'arsènic va ser analitzada utilitzant diferents models biològics. En la primera part d'aquest treball, el bioassaig de toxicitat Microtox, el qual està basat en la variació de l'emissió lumínica del bacteri luminiscent Vibrio fischeri, va ser utilitzat per establir les corbes dosi-resposta de diferents elements tòxics com el Zn(II), Pb(II), Cu(II), Hg(II), Ag(I), Co(II), Cd(II), Cr(VI), As(V) i As(III) en solucions aquoses. Els experiments es varen portar a terme a pH 6.0 i 7.0 per tal de mostrar que el pH pot influir en la toxicitat final mesurada d'alguns metalls degut als canvis relacionats amb la seva especiació química. Es varen trobar diferents tipus de corbes dosi-resposta depenent del metall analitzat i el pH del medi. En el cas de l'arsènic, l'efecte del pH en la toxicitat de l'arsenat i l'arsenit es va investigar utilitzant l'assaig Microtox en un rang de pHs comprès entre pH 5.0 i 9.0. Els valors d'EC50 determinats per l'As(V) disminueixen, reflectint un augment de la toxicitat, a mesura que el pH de la solució augmenta mentre que, en el cas de l'As(III), els valors d'EC50 quasi bé no varien entre pH 6.0 i 8.0 i només disminueixen a pH 9.0. HAsO42- i H2AsO3- es varen definir com les espècies més tòxiques. Així mateix, una anàlisi estadística va revelar un efecte antagònic entre les espècies químiques d'arsenat que es troben conjuntament a pH 6.0 i 7.0. D'altra banda, els resultats de dos mètodes estadístics per predir la toxicitat i les possibles interaccions entre el Co(II), Cd(II), Cu(II), Zn(II) i Pb(II) en mescles binàries equitòxiques es varen comparar amb la toxicitat observada sobre el bacteri Vibrio fischeri. L'efecte combinat d'aquests metalls va resultar ser antagònic per les mescles de Co(II)-Cd(II), Cd(II)-Zn(II), Cd(II)-Pb(II) i Cu(II)-Pb(II), sinèrgic per Co(II)-Cu(II) i Zn(II)-Pb(II) i additiu en els altres casos, revelant un patró complex de possibles interaccions. L'efecte sinèrgic de la combinació Co(II)-Cu(II) i la forta disminució de la toxicitat del Pb(II) quan es troba en presència de Cd(II) hauria de merèixer més atenció quan s'estableixen les normatives de seguretat ambiental. La sensibilitat de l'assaig Microtox també va ser determinada. Els valors d'EC20, els quals representen la toxicitat llindar mesurable, varen ser determinats per cada element individualment i es va veure que augmenten de la següent manera: Pb(II) < Ag(I) < Hg(II)  Cu(II) < Zn(II) < As(V) < Cd(II)  Co(II) < As(III) < Cr(VI). Aquests valors es varen comparar amb les concentracions permeses en aigues residuals industrials establertes per la normativa oficial de Catalunya (Espanya). L'assaig Microtox va resultar ser suficientment sensible per detectar els elements assajats respecte a les normes oficials referents al control de la contaminació, excepte en el cas del cadmi, mercuri, arsenat, arsenit i cromat. En la segona part d'aquest treball, com a resultats complementaris dels resultats previs obtinguts utilitzant l'assaig de toxicitat aguda Microtox, els efectes crònics del Cd(II), Cr(VI) i As(V) es varen analitzar sobre la taxa de creixement i la viabilitat en el mateix model biològic. Sorprenentment, aquests productes químics nocius varen resultar ser poc tòxics per aquest bacteri quan es mesura el seu efecte després de temps d'exposició llargs. Tot i això, en el cas del Cr(VI), l'assaig d'inhibició de la viabilitat va resultar ser més sensible que l'assaig de toxicitat aguda Microtox. Així mateix, també va ser possible observar un clar fenomen d'hormesis, especialment en el cas del Cd(II), quan s'utilitza l'assaig d'inhibició de la viabilitat. A més a més, diversos experiments es varen portar a terme per intentar explicar la manca de toxicitat de Cr(VI) mostrada pel bacteri Vibrio fischeri. La resistència mostrada per aquest bacteri podria ser atribuïda a la capacitat d'aquest bacteri de convertir el Cr(VI) a la forma menys tòxica de Cr(III). Es va trobar que aquesta capacitat de reducció depèn de la composició del medi de cultiu, de la concentració inicial de Cr(VI), del temps d'incubació i de la presència d'una font de carboni. En la tercera part d'aquest treball, la línia cel·lular humana HT29 i cultius primaris de cèl·lules sanguínies de Sparus sarba es varen utilitzar in vitro per detectar la toxicitat llindar de metalls mesurant la sobreexpressió de proteines d'estrès. Extractes de fangs precedents de diverses plantes de tractament d'aigues residuals i diferents metalls, individualment o en combinació, es varen analitzar sobre cultius cel·lulars humans per avaluar el seu efecte sobre la taxa de creixement i la capacitat d'induir la síntesi de les proteïnes Hsp72 relacionades amb l'estrès cel·lular. No es varen trobar efectes adversos significatius quan els components s'analitzen individualment. Nogensmenys, quan es troben conjuntament, es produeix un afecte advers sobre tan la taxa de creixement com en l'expressió de proteins d'estrès. D'altra banda, cèl·lules sanguínies procedents de Sparus sarba es varen exposar in vitro a diferents concentracions de cadmi, plom i crom. La proteïna d'estrès HSP70 es va sobreexpressar significativament després de l'exposició a concentracions tan febles com 0.1 M. Sota les nostres condicions de treball, no es va evidenciar una sobreexpressió de metal·lotioneïnes. Nogensmenys, les cèl·lules sanguínies de peix varen resultar ser un model biològic interessant per a ser utilitzat en anàlisis de toxicitat. Ambdós models biològics varen resultar ser molt adequats per a detectar acuradament la toxicitat produïda per metalls. En general, l'avaluació de la toxicitat basada en l'anàlisi de la sobreexpressió de proteïnes d'estrès és més sensible que l'avaluació de la toxicitat realitzada a nivell d'organisme. A partir dels resultats obtinguts, podem concloure que una bateria de bioassaigs és realment necessària per avaluar acuradament la toxicitat de metalls ja que existeixen grans variacions entre els valors de toxicitat obtinguts emprant diferents organismes i molts factors ambientals poden influir i modificar els resultats obtinguts.

Simplification, approximation and deformation of large models

The high level of realism and interaction in many computer graphic applications requires techniques for processing complex geometric models. First, we present a method that provides an accurate low-resolution approximation from a multi-chart textured model that guarantees geometric fidelity and correct preservation of the appearance attributes. Then, we introduce a mesh structure called Compact Model that approximates dense triangular meshes while preserving sharp features, allowing adaptive reconstructions and supporting textured models. Next, we design a new space deformation technique called *Cages based on a multi-level system of cages that preserves the smoothness of the mesh between neighbouring cages and is extremely versatile, allowing the use of heterogeneous sets of coordinates and different levels of deformation. Finally, we propose a hybrid method that allows to apply any deformation technique on large models obtaining high quality results with a reduced memory footprint and a high performance.

Immersive Projection for biochemical pattern matching

In all biological processes, protein molecules and other small molecules interact to function and form transient macromolecular complexes. This interaction of two or more molecules can be described by a docking event. Docking is an important phase for structure-based drug design strategies, as it can be used as a method to simulate protein-ligand interactions. Various docking programs exist that allow automated docking, but most of them have limited visualization and user interaction. It would be advantageous if scientists could visualize the molecules participating in the docking process, manipulate their structures and manually dock them before submitting the new conformations to an automated docking process in an immersive environment, which can help stimulate the design/docking process. This also could greatly reduce docking time and resources. To achieve this, we propose a new virtual modelling/docking program, whereby the advantages of virtual modelling programs and the efficiency of the algorithms in existing docking programs will be merged.

Calibration of uncertain flood inundation models using remotely sensed water levels

A traditional method of validating the performance of a flood model when remotely sensed data of the flood extent are available is to compare the predicted flood extent to that observed. The performance measure employed often uses areal pattern-matching to assess the degree to which the two extents overlap. Recently, remote sensing of flood extents using synthetic aperture radar (SAR) and airborne scanning laser altimetry (LIDAR) has made more straightforward the synoptic measurement of water surface elevations along flood waterlines, and this has emphasised the possibility of using alternative performance measures based on height. This paper considers the advantages that can accrue from using a performance measure based on waterline elevations rather than one based on areal patterns of wet and dry pixels. The two measures were compared for their ability to estimate flood inundation uncertainty maps from a set of model runs carried out to span the acceptable model parameter range in a GLUE-based analysis. A 1 in 5-year flood on the Thames in 1992 was used as a test event. As is typical for UK floods, only a single SAR image of observed flood extent was available for model calibration and validation. A simple implementation of a two-dimensional flood model (LISFLOOD-FP) was used to generate model flood extents for comparison with that observed. The performance measure based on height differences of corresponding points along the observed and modelled waterlines was found to be significantly more sensitive to the channel friction parameter than the measure based on areal patterns of flood extent. The former was able to restrict the parameter range of acceptable model runs and hence reduce the number of runs necessary to generate an inundation uncertainty map. A result of this was that there was less uncertainty in the final flood risk map. The uncertainty analysis included the effects of uncertainties in the observed flood extent as well as in model parameters. The height-based measure was found to be more sensitive when increased heighting accuracy was achieved by requiring that observed waterline heights varied slowly along the reach. The technique allows for the decomposition of the reach into sections, with different effective channel friction parameters used in different sections, which in this case resulted in lower r.m.s. height differences between observed and modelled waterlines than those achieved by runs using a single friction parameter for the whole reach. However, a validation of the modelled inundation uncertainty using the calibration event showed a significant difference between the uncertainty map and the observed flood extent. While this was true for both measures, the difference was especially significant for the height-based one. This is likely to be due to the conceptually simple flood inundation model and the coarse application resolution employed in this case. The increased sensitivity of the height-based measure may lead to an increased onus being placed on the model developer in the production of a valid model

A conventionally managed project: a systems based case study

The technique of linear responsibility analysis is used for a retrospective case study of a private development consisting of an extension to an existing building to provide a wholesale butchery facility. The project used a conventionally organized management process. The organization structure adopted on the project is analysed using concepts from the systems theory, which are included in Walkers theoretical model of the structure of building project organizations. This model proposes that the process of building provision can be viewed as systems and sub-systems that are differentiated from each other at decision points. Further to this, the sub-systems can be viewed as the interaction of managing system and operating system. Using Walkers model, a systematic analysis of the relationships between the contributors gives a quantitative assessment of the efficiency of the organizational structure used. The project's organization structure diverged from the models propositions resulting in delay to the project's completion and cost overrun but the client was satisfied with the project functionally.

Calibrating flood inundation models: identifying and addressing uncertainty in satellite observed flood extents

Improvements in the resolution of satellite imagery have enabled extraction of water surface elevations at the margins of the flood. Comparison between modelled and observed water surface elevations provides a new means for calibrating and validating flood inundation models, however the uncertainty in this observed data has yet to be addressed. Here a flood inundation model is calibrated using a probabilistic treatment of the observed data. A LiDAR guided snake algorithm is used to determine an outline of a flood event in 2006 on the River Dee, North Wales, UK, using a 12.5m ERS-1 image. Points at approximately 100m intervals along this outline are selected, and the water surface elevation recorded as the LiDAR DEM elevation at each point. With a planar water surface from the gauged upstream to downstream water elevations as an approximation, the water surface elevations at points along this flooded extent are compared to their ‘expected’ value. The pattern of errors between the two show a roughly normal distribution, however when plotted against coordinates there is obvious spatial autocorrelation. The source of this spatial dependency is investigated by comparing errors to the slope gradient and aspect of the LiDAR DEM. A LISFLOOD-FP model of the flood event is set-up to investigate the effect of observed data uncertainty on the calibration of flood inundation models. Multiple simulations are run using different combinations of friction parameters, from which the optimum parameter set will be selected. For each simulation a T-test is used to quantify the fit between modelled and observed water surface elevations. The points chosen for use in this T-test are selected based on their error. The criteria for selection enables evaluation of the sensitivity of the choice of optimum parameter set to uncertainty in the observed data. This work explores the observed data in detail and highlights possible causes of error. The identification of significant error (RMSE = 0.8m) between approximate expected and actual observed elevations from the remotely sensed data emphasises the limitations of using this data in a deterministic manner within the calibration process. These limitations are addressed by developing a new probabilistic approach to using the observed data.