Image Analysis for Evaluating Air Void Parameters of Concrete, HR-396, 1998

This research project investigated the use of image analysis to measure the air void parameters of concrete specimens produced under standard laboratory conditions. The results obtained from the image analysis technique were compared to results obtained from plastic air content tests, Danish air meter tests (also referred to as Air Void Analyzer tests), high-pressure air content tests on hardened concrete, and linear traverse tests (as per ASTM C-457). Hardened concrete specimens were sent to three different laboratories for the linear traverse tests. The samples that were circulated to the three labs consisted of specimens that needed different levels of surface preparation. The first set consisted of approximately 18 specimens that had been sectioned from a 4 in. by 4 in. by 18 in. (10 cm by 10 cm by 46 cm) beam using a saw equipped with a diamond blade. These specimens were subjected to the normal sample preparation techniques that were commonly employed by the three different labs (each lab practiced slightly different specimen preparation techniques). The second set of samples consisted of eight specimens that had been ground and polished at a single laboratory. The companion labs were only supposed to retouch the sample surfaces if they exhibited major flaws. In general, the study indicated that the image analysis test results for entrained air content exhibited good to strong correlation to the average values determined via the linear traverse technique. Specimens ground and polished in a single laboratory and then circulated to the other participating laboratories for the air content determinations exhibited the strongest correlation between the image analysis and linear traverse techniques (coefficient of determination, r-squared = 0.96, for n=8). Specimens ground and polished at each of the individual laboratories exhibited considerably more scatter (coefficient of determination, r-squared = 0.78, for n=16). The image analysis technique tended to produce low estimates of the specific surface of the voids when compared to the results from the linear traverse method. This caused the image analysis spacing factor calculations to produce larger values than those obtained from the linear traverse tests. The image analysis spacing factors were still successful at distinguishing between the frost-prone test specimens and the other (more durable) test specimens that were studied in this research project.

Correlation of Locally-Based Performance of Asphalts with their Physicochemical Parameters, Task 1 Report, HR-298, 1988

This is the first report of 6 tasks to be performed in an effort to establish locally-based quality and performance criteria for asphalts, and ultimately to develop performance-related specifications based on simple physicochemical methods. Three of the most promising chemical methods (high performance liquid chromatography (HPLC), thermal analysis, and X-ray diffraction were selected to analyze 4 different types of samples. The results will indicate the fundamental asphalt property variables that directly affect the field performance in Iowa. The details of the materials and procedures employed are described, and the results of the tests are presented.

Effects of group size and early handling on some behavioural and physiological welfare parameters in farmed blue foxes

Selostus: Ryhmäkoon ja varhaisen käsittelyn vaikutus tarhattujen sinikettujen hyvinvointiin

Effects of group size and space allocation on physiological, behavioural and production-related welfare parameters in farmed silver fox cubs

Selostus: Ryhmäkoon ja käytössä olevan tilan vaikutus tarhattujen hopeakettupentujen hyvinvointiin

Gait and foot clearance parameters obtained using shoe-worn inertial sensors in a large-population sample of older adults

In order to distinguish dysfunctional gait; clinicians require a measure of reference gait parameters for each population. This study provided normative values for widely used parameters in more than 1400 able-bodied adults over the age of 65. We also measured the foot clearance parameters (i.e., height of the foot above ground during swing phase) that are crucial to understand the complex relationship between gait and falls as well as obstacle negotiation strategies. We used a shoe-worn inertial sensor on each foot and previously validated algorithms to extract the gait parameters during 20 m walking trials in a corridor at a self-selected pace. We investigated the difference of the gait parameters between male and female participants by considering the effect of age and height factors. Besides; we examined the inter-relation of the clearance parameters with the gait speed. The sample size and breadth of gait parameters provided in this study offer a unique reference resource for the researchers.

Data-driven topo-climatic mapping with machine learning methods

Automatic environmental monitoring networks enforced by wireless communication technologies provide large and ever increasing volumes of data nowadays. The use of this information in natural hazard research is an important issue. Particularly useful for risk assessment and decision making are the spatial maps of hazard-related parameters produced from point observations and available auxiliary information. The purpose of this article is to present and explore the appropriate tools to process large amounts of available data and produce predictions at fine spatial scales. These are the algorithms of machine learning, which are aimed at non-parametric robust modelling of non-linear dependencies from empirical data. The computational efficiency of the data-driven methods allows producing the prediction maps in real time which makes them superior to physical models for the operational use in risk assessment and mitigation. Particularly, this situation encounters in spatial prediction of climatic variables (topo-climatic mapping). In complex topographies of the mountainous regions, the meteorological processes are highly influenced by the relief. The article shows how these relations, possibly regionalized and non-linear, can be modelled from data using the information from digital elevation models. The particular illustration of the developed methodology concerns the mapping of temperatures (including the situations of Föhn and temperature inversion) given the measurements taken from the Swiss meteorological monitoring network. The range of the methods used in the study includes data-driven feature selection, support vector algorithms and artificial neural networks.

Testing the competitive exclusion principle using various niche parameters in a native (Natrix maura) and an introduced (N. tessellata) colubrid

Despite the increase of animal and plant introductions worldwide and the strong augmentation of the reptile trade, few invasive snake populations have been studied. Dice snakes (Natrix tessellata) were introduced to the shores of Lake Geneva (Switzerland) in the early 1920s, and are now well established. This region of introduction was previously inhabited by Viperine snakes (N. maura). Ever since these two species have been under monitoring (which began in 1996) the Viperine snake population has shown drastic decline. We examine here the possibility of trophic competition by analysing diet composition, prey size and trophic niche overlap. Spatial distribution is also assessed in order to address the question of spatial competitive exclusion. We found very similar diets, and thus a high trophic niche overlap, indicating no partitioning of the trophic resource. No arguments in favour of spatial competitive exclusion were found. Our study suggests that trophic competition may occur between the two natricines and that it may give an explanation for the drastic decline of the Viperine snake in this area. Other pathways potentially playing a role in the exclusion of the Viperine snake are discussed.

An application of capital allocation principles to operational risk

The cost of operational risk refers to the capital needed to a fford the loss generated by ordinary activities of a firm. In this work we demonstrate how allocation principles can be used to the subdivision of the aggregate capital so that the firm can distribute this cost across its various constituents that generate operational risk. Several capital allocation principles are revised. Proportional allocation allows to calculate a relative risk premium to be charged to each unit. An example of fraud risk in the banking sector is presented and some correlation scenarios between business lines are compared. Keywords: solvency, quantile, value at risk, copulas

Comprehensive analysis of proteins secreted by dermatophytes in a protein medium which to some extent mimic "in vivo" growth parameters

RESUME : Les dermatophytes sont les agents infectieux les plus fréquents responsables de la plupart des mycoses superficielles chez les humains et chez les animaux. Ces infections, dermatophytoses, également appelées tineas ou teignes, sont fréquentes et causent des problèmes de santé publique au niveau mondial. La capacité d'envahir et de progresser au sein des structures kératinisées est probablement liée à la sécrétion de différentes enzymes kératinolytiques, qui sont considérées comme la principale caractéristique liée à la pathogénicité de ces champignons. L'objectif de ma thèse a été premièrement de progresser dans l'identification et la caractérisation des nouvelles protéines sécrétées, afin de mieux comprendre a) la capacité globale des dermatophytes à envahir les structures kératinisées, et b) les différences dans la virulence et la spécificité d'hôte que présentent les espèces étudiées .Pour progresser dans l'identification et la caractérisation de ces nouvelles protéines, les secretomes de six espèces de dermatophytes (Trichophyton rubrum, Trichophyton violaceum, Trichophyton soudanense, Trichophyton equinum, Arthroderma vanbreuseghemii et Trichophyton tonsurans) ont été étudiés. Bien qu'il y ait un niveau globalement élevé de similitude entre les protéases sécrétées, les différentes espèces de dermatophytes sécrètent des profiles protéiques distincts lorsqu'elles sont cultivées dans les mêmes conditions de culture, et donc une signature spécifique a pu être associé à chaque espèce. Ces profiles ont été un outil avantageux pour identifier et cartographier les protéines orthologues aux six espèces et ont aussi permit la discrimination d'espèces très proches comme T. tonsurans et T. equinum qui ne peuvent pas être différenciées par l'ADN ribosomal. Ce travail également présente ce que l'on croit être la première identification global des protéines sécrétées par les dermatophytes dans des conditions de culture que incitent l'activité protéolytique extracellulaire. Ce catalogue de protéines, comprenant des endo- and exo- proteases, autres hydrolases, oxydoreductases et des protéines avec fonction inconnue, représente probablement le spectre d'enzymes qui permettent la dégradation des tissus kératinisés en composés qui peuvent être assimilés par le champignon. Les résultats suggèrent qu'un changement écologique pourrait être associé à une expression différentielle des gènes codant les protéines sécrétées, en particulier, les protéases, plutôt qu'à des divergences génétiques au niveau des gènes codant les protéines orthologues. Une sécrétion différentielle des protéines par les dermatophytes pourrait également être responsable de la variabilité inflammatoire qui causent ces agents infectieux chez les différents hôtes. Par conséquent, les protéines identifiées ici sont également importantes pour faire la lumière sur la réponse immunitaire de l'hôte au cours du processus infectieux. SUMMARY : Dermatophytes are the most common infectious agents responsible for superficial mycosis in humans and animals. Dermatophytoses, also called tineas or ringworm, are frequent and cause public health problems worldwide. The secretion of different keratinolytic enzymes is believed to be a key pathogenicity-related characteristic of these fungi. The aim of this work was first to progress in the identification and characterization of novel secreted proteins, in order to better understand a) the overall capability of dermatophytes to invade keratinised structures, and b) differences in virulence and host-specificity of the investigated species. To progress in the identification and characterization of novel proteins, the secretomes from Trichophyton rubrum, Trichophyton violaceum, Trichophyton soudanense, Trichophyton equinum, Arthroderma vanbreuseghemii and Trichophyton tonsurans were studied. Although there is a high global level of similarity among the secreted proteases, different dermatophyte species produce distinct patterns of proteins when grown in the same culture medium, and so a specific signature could be associated to each species. These patterns were useful to identify and map orthologous proteins among the six species, as well as to discriminate the closely related species T. tonsurans and T. equinum, which cannot be differentiated by ribosomal DNA. This work also presents the first in-depth identification of the major proteins secreted by dermatophytes growing under conditions promoting extracellular proteolytic activity. This catalogue of proteins, which include several endo- and exo- proteases, other hydrolases, oxydoreductases, and proteins of unknown function, probably represents the spectrum of enzymes that allow the degradation of keratinized tissues into compounds which can be assimilated by the fungus. The results suggest that ecological switching could be related to a differential expression of genes encoding secreted proteins, particularly, proteases, rather than genetic divergences of the genes encoding orthologous proteins. Differential secretion of proteins by Dermatophyte species could also be responsible for the variable inflammation caused by the infectious agent within the host. Therefore, the proteins here identified are also important to shed light into the immune response of the host during the infection process.

Iowa Department of Public Health, Strategic Operational Plan, 2014-2016

This report outlines the strategic plan for Iowa Department of Public Health, goals and mission.

Outcome evaluation of ankle osteoarthritis treatments using spatio-temporal gait parameters and plantar pressure during unconstrained long distance walking : P25

Introduction: Ankle arthrodesis (AD) and total ankle replacement (TAR) are typical treatments for ankle osteoarthritis (AO). Despite clinical interest, there is a lack of their outcome evaluation using objective criteria. Gait analysis and plantar pressure assessment are appropriate to detect pathologies in orthopaedics but they are mostly used in lab with few gait cycles. In this study, we propose an ambulatory device based on inertial and plantar pressure sensors to compare the gait during long-distance trials between healthy subjects (H) and patients with AO or treated by AD and TAR. Methods: Our study included four groups: 11 patients with AO, 9 treated by TAR, 7 treated by AD and 6 control subjects. An ambulatory system (Physilog®, CH) was used for gait analysis; plantar pressure measurements were done using a portable insole (Pedar®-X, DE). The subjects were asked to walk 50 meters in two trials. Mean value and coefficient of variation of spatio-temporal gait parameters were calculated for each trial. Pressure distribution was analyzed in ten subregions of foot. All parameters were compared among the four groups using multi-level model-based statistical analysis. Results: Significant difference (p <0.05) with control was noticed for AO patients in maximum force in medial hindfoot and forefoot and in central forefoot. These differences were no longer significant in TAR and AD groups. Cadence and speed of all pathologic groups showed significant difference with control. Both treatments showed a significant improvement in double support and stance. TAR decreased variability in speed, stride length and knee ROM. Conclusions: In spite of a small sample size, this study showed that ankle function after AO treatments can be evaluated objectively based on plantar pressure and spatio-temporal gait parameters measured during unconstrained walking outside the lab. The combination of these two ambulatory techniques provides a promising way to evaluate foot function in clinics.

Identification of Wax Esters in Latent Print Residues by Gas Chromatography-Mass Spectromertry and Their Potential Use as Aging Parameters

Recent studies show that the composition of fingerprint residue varies significantly from the same donor as well as between donors. This variability is a major drawback in latent print dating issues. This study aimed, therefore, at the definition of a parameter that is less variable from print to print, using a ratio of peak area of a target compound degrading over time divided by the summed area of peaks of more stable compounds also found in latent print residues.Gas chromatography-mass spectrometry (GC/MS) analysis of the initial lipid composition of latent prints identifies four main classes of compounds that can be used in the definition of an aging parameter: fatty acids, sterols, sterol precursors, and wax esters (WEs). Although the entities composing the first three groups are quite well known, those composing WEs are poorly reported. Therefore, the first step of the present work was to identify WE compounds present in latent print residues deposited by different donors. Of 29 WEs recorded in the chromatograms, seven were observed in the majority of samples.The identified WE compounds were subsequently used in the definition of ratios in combination with squalene and cholesterol to reduce the variability of the initial composition between latent print residues from different persons and more particularly from the same person. Finally, the influence of a latent print enhancement process on the initial composition was studied by analyzing traces after treatment with magnetic powder, 1,2-indanedione, and cyanoacrylate.

Basic density and pulp yield relationship with some chemical parameters in eucalyptus trees

The objective of this work was to evaluate the use of basic density and pulp yield correlations with some chemical parameters, in order to differentiate an homogeneous eucalyptus tree population, in terms of its potential for pulp production or some other technological applications. Basic density and kraft pulp yield were determined for 120 Eucalyptus globulus trees, and the values were plotted as frequency distributions. Homogenized samples from the first and fourth density quartiles and first and fourth yield quartiles were submitted to total phenols, total sugars and methoxyl group analysis. Syringyl/guaiacyl (S/G) and syringaldehyde/vanillin (S/V) ratios were determined on the kraft lignins from wood of the same quartiles. The results show the similarity between samples from high density and low yield quartiles, both with lower S/G (3.88-4.12) and S/V (3.99-4.09) ratios and higher total phenols (13.3-14.3 g gallic acid kg-1 ). Woods from the high yield quartile are statistically distinguished from all the others because of their higher S/G (5.15) and S/V (4.98) ratios and lower total phenols (8.7 g gallic acid kg-1 ). Methoxyl group and total sugars parameters are more adequate to distinguish wood samples with lower density.

New perspectives in the use of ink evidence in forensic science: Part III: Operational applications and evaluation.

The research reported in this series of article aimed at (1) automating the search of questioned ink specimens in ink reference collections and (2) at evaluating the strength of ink evidence in a transparent and balanced manner. These aims require that ink samples are analysed in an accurate and reproducible way and that they are compared in an objective and automated way. This latter requirement is due to the large number of comparisons that are necessary in both scenarios. A research programme was designed to (a) develop a standard methodology for analysing ink samples in a reproducible way, (b) comparing automatically and objectively ink samples and (c) evaluate the proposed methodology in forensic contexts. This report focuses on the last of the three stages of the research programme. The calibration and acquisition process and the mathematical comparison algorithms were described in previous papers [C. Neumann, P. Margot, New perspectives in the use of ink evidence in forensic science-Part I: Development of a quality assurance process for forensic ink analysis by HPTLC, Forensic Sci. Int. 185 (2009) 29-37; C. Neumann, P. Margot, New perspectives in the use of ink evidence in forensic science-Part II: Development and testing of mathematical algorithms for the automatic comparison of ink samples analysed by HPTLC, Forensic Sci. Int. 185 (2009) 38-50]. In this paper, the benefits and challenges of the proposed concepts are tested in two forensic contexts: (1) ink identification and (2) ink evidential value assessment. The results show that different algorithms are better suited for different tasks. This research shows that it is possible to build digital ink libraries using the most commonly used ink analytical technique, i.e. high-performance thin layer chromatography, despite its reputation of lacking reproducibility. More importantly, it is possible to assign evidential value to ink evidence in a transparent way using a probabilistic model. It is therefore possible to move away from the traditional subjective approach, which is entirely based on experts' opinion, and which is usually not very informative. While there is room for the improvement, this report demonstrates the significant gains obtained over the traditional subjective approach for the search of ink specimens in ink databases, and the interpretation of their evidential value.